1 // SPDX-License-Identifier: GPL-2.0-only
3 * MEN 16Z127 GPIO driver
5 * Copyright (C) 2016 MEN Mikroelektronik GmbH (www.men.de)
8 #include <linux/kernel.h>
9 #include <linux/module.h>
11 #include <linux/err.h>
12 #include <linux/mcb.h>
13 #include <linux/bitops.h>
14 #include <linux/gpio/driver.h>
16 #define MEN_Z127_CTRL 0x00
17 #define MEN_Z127_PSR 0x04
18 #define MEN_Z127_IRQR 0x08
19 #define MEN_Z127_GPIODR 0x0c
20 #define MEN_Z127_IER1 0x10
21 #define MEN_Z127_IER2 0x14
22 #define MEN_Z127_DBER 0x18
23 #define MEN_Z127_ODER 0x1C
24 #define GPIO_TO_DBCNT_REG(gpio) ((gpio * 4) + 0x80)
26 #define MEN_Z127_DB_MIN_US 50
27 /* 16 bit compare register. Each bit represents 50us */
28 #define MEN_Z127_DB_MAX_US (0xffff * MEN_Z127_DB_MIN_US)
29 #define MEN_Z127_DB_IN_RANGE(db) ((db >= MEN_Z127_DB_MIN_US) && \
30 (db <= MEN_Z127_DB_MAX_US))
32 struct men_z127_gpio {
34 void __iomem *reg_base;
38 static int men_z127_debounce(struct gpio_chip *gc, unsigned gpio,
41 struct men_z127_gpio *priv = gpiochip_get_data(gc);
42 struct device *dev = gc->parent;
46 if (!MEN_Z127_DB_IN_RANGE(debounce)) {
47 dev_err(dev, "debounce value %u out of range", debounce);
52 /* round up or down depending on MSB-1 */
53 rnd = fls(debounce) - 1;
55 if (rnd && (debounce & BIT(rnd - 1)))
56 debounce = roundup(debounce, MEN_Z127_DB_MIN_US);
58 debounce = rounddown(debounce, MEN_Z127_DB_MIN_US);
60 if (debounce > MEN_Z127_DB_MAX_US)
61 debounce = MEN_Z127_DB_MAX_US;
63 /* 50us per register unit */
67 spin_lock(&gc->bgpio_lock);
69 db_en = readl(priv->reg_base + MEN_Z127_DBER);
79 writel(db_en, priv->reg_base + MEN_Z127_DBER);
80 writel(db_cnt, priv->reg_base + GPIO_TO_DBCNT_REG(gpio));
82 spin_unlock(&gc->bgpio_lock);
87 static int men_z127_set_single_ended(struct gpio_chip *gc,
89 enum pin_config_param param)
91 struct men_z127_gpio *priv = gpiochip_get_data(gc);
94 spin_lock(&gc->bgpio_lock);
95 od_en = readl(priv->reg_base + MEN_Z127_ODER);
97 if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN)
100 /* Implicitly PIN_CONFIG_DRIVE_PUSH_PULL */
101 od_en &= ~BIT(offset);
103 writel(od_en, priv->reg_base + MEN_Z127_ODER);
104 spin_unlock(&gc->bgpio_lock);
109 static int men_z127_set_config(struct gpio_chip *gc, unsigned offset,
110 unsigned long config)
112 enum pin_config_param param = pinconf_to_config_param(config);
115 case PIN_CONFIG_DRIVE_OPEN_DRAIN:
116 case PIN_CONFIG_DRIVE_PUSH_PULL:
117 return men_z127_set_single_ended(gc, offset, param);
119 case PIN_CONFIG_INPUT_DEBOUNCE:
120 return men_z127_debounce(gc, offset,
121 pinconf_to_config_argument(config));
130 static int men_z127_probe(struct mcb_device *mdev,
131 const struct mcb_device_id *id)
133 struct men_z127_gpio *men_z127_gpio;
134 struct device *dev = &mdev->dev;
137 men_z127_gpio = devm_kzalloc(dev, sizeof(struct men_z127_gpio),
142 men_z127_gpio->mem = mcb_request_mem(mdev, dev_name(dev));
143 if (IS_ERR(men_z127_gpio->mem)) {
144 dev_err(dev, "failed to request device memory");
145 return PTR_ERR(men_z127_gpio->mem);
148 men_z127_gpio->reg_base = ioremap(men_z127_gpio->mem->start,
149 resource_size(men_z127_gpio->mem));
150 if (men_z127_gpio->reg_base == NULL) {
155 mcb_set_drvdata(mdev, men_z127_gpio);
157 ret = bgpio_init(&men_z127_gpio->gc, &mdev->dev, 4,
158 men_z127_gpio->reg_base + MEN_Z127_PSR,
159 men_z127_gpio->reg_base + MEN_Z127_CTRL,
161 men_z127_gpio->reg_base + MEN_Z127_GPIODR,
166 men_z127_gpio->gc.set_config = men_z127_set_config;
168 ret = gpiochip_add_data(&men_z127_gpio->gc, men_z127_gpio);
170 dev_err(dev, "failed to register MEN 16Z127 GPIO controller");
174 dev_info(dev, "MEN 16Z127 GPIO driver registered");
179 iounmap(men_z127_gpio->reg_base);
181 mcb_release_mem(men_z127_gpio->mem);
185 static void men_z127_remove(struct mcb_device *mdev)
187 struct men_z127_gpio *men_z127_gpio = mcb_get_drvdata(mdev);
189 gpiochip_remove(&men_z127_gpio->gc);
190 iounmap(men_z127_gpio->reg_base);
191 mcb_release_mem(men_z127_gpio->mem);
194 static const struct mcb_device_id men_z127_ids[] = {
198 MODULE_DEVICE_TABLE(mcb, men_z127_ids);
200 static struct mcb_driver men_z127_driver = {
204 .probe = men_z127_probe,
205 .remove = men_z127_remove,
206 .id_table = men_z127_ids,
208 module_mcb_driver(men_z127_driver);
210 MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
211 MODULE_DESCRIPTION("MEN 16z127 GPIO Controller");
212 MODULE_LICENSE("GPL v2");
213 MODULE_ALIAS("mcb:16z127");
214 MODULE_IMPORT_NS(MCB);