2 * Copyright 2015 IBM Corp.
4 * Joel Stanley <joel@jms.id.au>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <asm/div64.h>
13 #include <linux/clk.h>
14 #include <linux/gpio/driver.h>
15 #include <linux/hashtable.h>
16 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/pinctrl/consumer.h>
21 #include <linux/platform_device.h>
22 #include <linux/spinlock.h>
23 #include <linux/string.h>
25 struct aspeed_bank_props {
31 struct aspeed_gpio_config {
32 unsigned int nr_gpios;
33 const struct aspeed_bank_props *props;
37 * @offset_timer: Maps an offset to an @timer_users index, or zero if disabled
38 * @timer_users: Tracks the number of users for each timer
40 * The @timer_users has four elements but the first element is unused. This is
41 * to simplify accounting and indexing, as a zero value in @offset_timer
42 * represents disabled debouncing for the GPIO. Any other value for an element
43 * of @offset_timer is used as an index into @timer_users. This behaviour of
44 * the zero value aligns with the behaviour of zero built from the timer
45 * configuration registers (i.e. debouncing is disabled).
48 struct gpio_chip chip;
52 const struct aspeed_gpio_config *config;
55 unsigned int timer_users[4];
59 struct aspeed_gpio_bank {
62 uint16_t debounce_regs;
63 uint16_t tolerance_regs;
64 const char names[4][3];
67 static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 };
69 static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
73 .debounce_regs = 0x0040,
74 .tolerance_regs = 0x001c,
75 .names = { "A", "B", "C", "D" },
80 .debounce_regs = 0x0048,
81 .tolerance_regs = 0x003c,
82 .names = { "E", "F", "G", "H" },
87 .debounce_regs = 0x00b0,
88 .tolerance_regs = 0x00ac,
89 .names = { "I", "J", "K", "L" },
94 .debounce_regs = 0x0100,
95 .tolerance_regs = 0x00fc,
96 .names = { "M", "N", "O", "P" },
101 .debounce_regs = 0x0130,
102 .tolerance_regs = 0x012c,
103 .names = { "Q", "R", "S", "T" },
108 .debounce_regs = 0x0160,
109 .tolerance_regs = 0x015c,
110 .names = { "U", "V", "W", "X" },
115 .debounce_regs = 0x0190,
116 .tolerance_regs = 0x018c,
117 .names = { "Y", "Z", "AA", "AB" },
122 .debounce_regs = 0x01c0,
123 .tolerance_regs = 0x01bc,
124 .names = { "AC", "", "", "" },
128 #define GPIO_BANK(x) ((x) >> 5)
129 #define GPIO_OFFSET(x) ((x) & 0x1f)
130 #define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
132 #define GPIO_DATA 0x00
133 #define GPIO_DIR 0x04
135 #define GPIO_IRQ_ENABLE 0x00
136 #define GPIO_IRQ_TYPE0 0x04
137 #define GPIO_IRQ_TYPE1 0x08
138 #define GPIO_IRQ_TYPE2 0x0c
139 #define GPIO_IRQ_STATUS 0x10
141 #define GPIO_DEBOUNCE_SEL1 0x00
142 #define GPIO_DEBOUNCE_SEL2 0x04
144 #define _GPIO_SET_DEBOUNCE(t, o, i) ((!!((t) & BIT(i))) << GPIO_OFFSET(o))
145 #define GPIO_SET_DEBOUNCE1(t, o) _GPIO_SET_DEBOUNCE(t, o, 1)
146 #define GPIO_SET_DEBOUNCE2(t, o) _GPIO_SET_DEBOUNCE(t, o, 0)
148 static const struct aspeed_gpio_bank *to_bank(unsigned int offset)
150 unsigned int bank = GPIO_BANK(offset);
152 WARN_ON(bank >= ARRAY_SIZE(aspeed_gpio_banks));
153 return &aspeed_gpio_banks[bank];
156 static inline bool is_bank_props_sentinel(const struct aspeed_bank_props *props)
158 return !(props->input || props->output);
161 static inline const struct aspeed_bank_props *find_bank_props(
162 struct aspeed_gpio *gpio, unsigned int offset)
164 const struct aspeed_bank_props *props = gpio->config->props;
166 while (!is_bank_props_sentinel(props)) {
167 if (props->bank == GPIO_BANK(offset))
175 static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset)
177 const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
178 const struct aspeed_gpio_bank *bank = to_bank(offset);
179 unsigned int group = GPIO_OFFSET(offset) / 8;
181 return bank->names[group][0] != '\0' &&
182 (!props || ((props->input | props->output) & GPIO_BIT(offset)));
185 static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
187 const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
189 return !props || (props->input & GPIO_BIT(offset));
192 #define have_irq(g, o) have_input((g), (o))
193 #define have_debounce(g, o) have_input((g), (o))
195 static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset)
197 const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
199 return !props || (props->output & GPIO_BIT(offset));
202 static void __iomem *bank_val_reg(struct aspeed_gpio *gpio,
203 const struct aspeed_gpio_bank *bank,
206 return gpio->base + bank->val_regs + reg;
209 static void __iomem *bank_irq_reg(struct aspeed_gpio *gpio,
210 const struct aspeed_gpio_bank *bank,
213 return gpio->base + bank->irq_regs + reg;
216 static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset)
218 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
219 const struct aspeed_gpio_bank *bank = to_bank(offset);
221 return !!(ioread32(bank_val_reg(gpio, bank, GPIO_DATA))
225 static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
228 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
229 const struct aspeed_gpio_bank *bank = to_bank(offset);
233 addr = bank_val_reg(gpio, bank, GPIO_DATA);
234 reg = ioread32(addr);
237 reg |= GPIO_BIT(offset);
239 reg &= ~GPIO_BIT(offset);
241 iowrite32(reg, addr);
244 static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
247 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
250 spin_lock_irqsave(&gpio->lock, flags);
252 __aspeed_gpio_set(gc, offset, val);
254 spin_unlock_irqrestore(&gpio->lock, flags);
257 static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
259 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
260 const struct aspeed_gpio_bank *bank = to_bank(offset);
264 if (!have_input(gpio, offset))
267 spin_lock_irqsave(&gpio->lock, flags);
269 reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
270 iowrite32(reg & ~GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));
272 spin_unlock_irqrestore(&gpio->lock, flags);
277 static int aspeed_gpio_dir_out(struct gpio_chip *gc,
278 unsigned int offset, int val)
280 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
281 const struct aspeed_gpio_bank *bank = to_bank(offset);
285 if (!have_output(gpio, offset))
288 spin_lock_irqsave(&gpio->lock, flags);
290 reg = ioread32(bank_val_reg(gpio, bank, GPIO_DIR));
291 iowrite32(reg | GPIO_BIT(offset), bank_val_reg(gpio, bank, GPIO_DIR));
293 __aspeed_gpio_set(gc, offset, val);
295 spin_unlock_irqrestore(&gpio->lock, flags);
300 static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
302 struct aspeed_gpio *gpio = gpiochip_get_data(gc);
303 const struct aspeed_gpio_bank *bank = to_bank(offset);
307 if (!have_input(gpio, offset))
310 if (!have_output(gpio, offset))
313 spin_lock_irqsave(&gpio->lock, flags);
315 val = ioread32(bank_val_reg(gpio, bank, GPIO_DIR)) & GPIO_BIT(offset);
317 spin_unlock_irqrestore(&gpio->lock, flags);
323 static inline int irqd_to_aspeed_gpio_data(struct irq_data *d,
324 struct aspeed_gpio **gpio,
325 const struct aspeed_gpio_bank **bank,
329 struct aspeed_gpio *internal;
331 offset = irqd_to_hwirq(d);
333 internal = irq_data_get_irq_chip_data(d);
335 /* This might be a bit of a questionable place to check */
336 if (!have_irq(internal, offset))
340 *bank = to_bank(offset);
341 *bit = GPIO_BIT(offset);
346 static void aspeed_gpio_irq_ack(struct irq_data *d)
348 const struct aspeed_gpio_bank *bank;
349 struct aspeed_gpio *gpio;
351 void __iomem *status_addr;
355 rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
359 status_addr = bank_irq_reg(gpio, bank, GPIO_IRQ_STATUS);
361 spin_lock_irqsave(&gpio->lock, flags);
362 iowrite32(bit, status_addr);
363 spin_unlock_irqrestore(&gpio->lock, flags);
366 static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
368 const struct aspeed_gpio_bank *bank;
369 struct aspeed_gpio *gpio;
375 rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
379 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_ENABLE);
381 spin_lock_irqsave(&gpio->lock, flags);
383 reg = ioread32(addr);
388 iowrite32(reg, addr);
390 spin_unlock_irqrestore(&gpio->lock, flags);
393 static void aspeed_gpio_irq_mask(struct irq_data *d)
395 aspeed_gpio_irq_set_mask(d, false);
398 static void aspeed_gpio_irq_unmask(struct irq_data *d)
400 aspeed_gpio_irq_set_mask(d, true);
403 static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
409 const struct aspeed_gpio_bank *bank;
410 irq_flow_handler_t handler;
411 struct aspeed_gpio *gpio;
416 rc = irqd_to_aspeed_gpio_data(d, &gpio, &bank, &bit);
420 switch (type & IRQ_TYPE_SENSE_MASK) {
421 case IRQ_TYPE_EDGE_BOTH:
424 case IRQ_TYPE_EDGE_RISING:
427 case IRQ_TYPE_EDGE_FALLING:
428 handler = handle_edge_irq;
430 case IRQ_TYPE_LEVEL_HIGH:
433 case IRQ_TYPE_LEVEL_LOW:
435 handler = handle_level_irq;
441 spin_lock_irqsave(&gpio->lock, flags);
443 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE0);
444 reg = ioread32(addr);
445 reg = (reg & ~bit) | type0;
446 iowrite32(reg, addr);
448 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE1);
449 reg = ioread32(addr);
450 reg = (reg & ~bit) | type1;
451 iowrite32(reg, addr);
453 addr = bank_irq_reg(gpio, bank, GPIO_IRQ_TYPE2);
454 reg = ioread32(addr);
455 reg = (reg & ~bit) | type2;
456 iowrite32(reg, addr);
458 spin_unlock_irqrestore(&gpio->lock, flags);
460 irq_set_handler_locked(d, handler);
465 static void aspeed_gpio_irq_handler(struct irq_desc *desc)
467 struct gpio_chip *gc = irq_desc_get_handler_data(desc);
468 struct irq_chip *ic = irq_desc_get_chip(desc);
469 struct aspeed_gpio *data = gpiochip_get_data(gc);
470 unsigned int i, p, girq;
473 chained_irq_enter(ic, desc);
475 for (i = 0; i < ARRAY_SIZE(aspeed_gpio_banks); i++) {
476 const struct aspeed_gpio_bank *bank = &aspeed_gpio_banks[i];
478 reg = ioread32(bank_irq_reg(data, bank, GPIO_IRQ_STATUS));
480 for_each_set_bit(p, ®, 32) {
481 girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
482 generic_handle_irq(girq);
487 chained_irq_exit(ic, desc);
490 static struct irq_chip aspeed_gpio_irqchip = {
491 .name = "aspeed-gpio",
492 .irq_ack = aspeed_gpio_irq_ack,
493 .irq_mask = aspeed_gpio_irq_mask,
494 .irq_unmask = aspeed_gpio_irq_unmask,
495 .irq_set_type = aspeed_gpio_set_type,
498 static void set_irq_valid_mask(struct aspeed_gpio *gpio)
500 const struct aspeed_bank_props *props = gpio->config->props;
502 while (!is_bank_props_sentinel(props)) {
504 const unsigned long int input = props->input;
506 /* Pretty crummy approach, but similar to GPIO core */
507 for_each_clear_bit(offset, &input, 32) {
508 unsigned int i = props->bank * 32 + offset;
510 if (i >= gpio->config->nr_gpios)
513 clear_bit(i, gpio->chip.irq.valid_mask);
520 static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio,
521 struct platform_device *pdev)
525 rc = platform_get_irq(pdev, 0);
531 set_irq_valid_mask(gpio);
533 rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_gpio_irqchip,
534 0, handle_bad_irq, IRQ_TYPE_NONE);
536 dev_info(&pdev->dev, "Could not add irqchip\n");
540 gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_gpio_irqchip,
541 gpio->irq, aspeed_gpio_irq_handler);
546 static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
547 unsigned int offset, bool enable)
549 struct aspeed_gpio *gpio = gpiochip_get_data(chip);
550 const struct aspeed_gpio_bank *bank;
554 bank = to_bank(offset);
556 spin_lock_irqsave(&gpio->lock, flags);
557 val = readl(gpio->base + bank->tolerance_regs);
560 val |= GPIO_BIT(offset);
562 val &= ~GPIO_BIT(offset);
564 writel(val, gpio->base + bank->tolerance_regs);
565 spin_unlock_irqrestore(&gpio->lock, flags);
570 static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
572 if (!have_gpio(gpiochip_get_data(chip), offset))
575 return pinctrl_gpio_request(chip->base + offset);
578 static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
580 pinctrl_gpio_free(chip->base + offset);
583 static inline void __iomem *bank_debounce_reg(struct aspeed_gpio *gpio,
584 const struct aspeed_gpio_bank *bank,
587 return gpio->base + bank->debounce_regs + reg;
590 static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
597 rate = clk_get_rate(gpio->clk);
602 r = do_div(n, 1000000);
607 /* At least as long as the requested time */
613 /* Call under gpio->lock */
614 static int register_allocated_timer(struct aspeed_gpio *gpio,
615 unsigned int offset, unsigned int timer)
617 if (WARN(gpio->offset_timer[offset] != 0,
618 "Offset %d already allocated timer %d\n",
619 offset, gpio->offset_timer[offset]))
622 if (WARN(gpio->timer_users[timer] == UINT_MAX,
623 "Timer user count would overflow\n"))
626 gpio->offset_timer[offset] = timer;
627 gpio->timer_users[timer]++;
632 /* Call under gpio->lock */
633 static int unregister_allocated_timer(struct aspeed_gpio *gpio,
636 if (WARN(gpio->offset_timer[offset] == 0,
637 "No timer allocated to offset %d\n", offset))
640 if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0,
641 "No users recorded for timer %d\n",
642 gpio->offset_timer[offset]))
645 gpio->timer_users[gpio->offset_timer[offset]]--;
646 gpio->offset_timer[offset] = 0;
651 /* Call under gpio->lock */
652 static inline bool timer_allocation_registered(struct aspeed_gpio *gpio,
655 return gpio->offset_timer[offset] > 0;
658 /* Call under gpio->lock */
659 static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset,
662 const struct aspeed_gpio_bank *bank = to_bank(offset);
663 const u32 mask = GPIO_BIT(offset);
667 addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL1);
668 val = ioread32(addr);
669 iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE1(timer, offset), addr);
671 addr = bank_debounce_reg(gpio, bank, GPIO_DEBOUNCE_SEL2);
672 val = ioread32(addr);
673 iowrite32((val & ~mask) | GPIO_SET_DEBOUNCE2(timer, offset), addr);
676 static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
679 struct aspeed_gpio *gpio = gpiochip_get_data(chip);
680 u32 requested_cycles;
688 rc = usecs_to_cycles(gpio, usecs, &requested_cycles);
690 dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n",
691 usecs, clk_get_rate(gpio->clk), rc);
695 spin_lock_irqsave(&gpio->lock, flags);
697 if (timer_allocation_registered(gpio, offset)) {
698 rc = unregister_allocated_timer(gpio, offset);
703 /* Try to find a timer already configured for the debounce period */
704 for (i = 1; i < ARRAY_SIZE(debounce_timers); i++) {
707 cycles = ioread32(gpio->base + debounce_timers[i]);
708 if (requested_cycles == cycles)
712 if (i == ARRAY_SIZE(debounce_timers)) {
716 * As there are no timers configured for the requested debounce
717 * period, find an unused timer instead
719 for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) {
720 if (gpio->timer_users[j] == 0)
724 if (j == ARRAY_SIZE(gpio->timer_users)) {
725 dev_warn(chip->parent,
726 "Debounce timers exhausted, cannot debounce for period %luus\n",
732 * We already adjusted the accounting to remove @offset
733 * as a user of its previous timer, so also configure
734 * the hardware so @offset has timers disabled for
737 configure_timer(gpio, offset, 0);
743 iowrite32(requested_cycles, gpio->base + debounce_timers[i]);
746 if (WARN(i == 0, "Cannot register index of disabled timer\n")) {
751 register_allocated_timer(gpio, offset, i);
752 configure_timer(gpio, offset, i);
755 spin_unlock_irqrestore(&gpio->lock, flags);
760 static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
762 struct aspeed_gpio *gpio = gpiochip_get_data(chip);
766 spin_lock_irqsave(&gpio->lock, flags);
768 rc = unregister_allocated_timer(gpio, offset);
770 configure_timer(gpio, offset, 0);
772 spin_unlock_irqrestore(&gpio->lock, flags);
777 static int set_debounce(struct gpio_chip *chip, unsigned int offset,
780 struct aspeed_gpio *gpio = gpiochip_get_data(chip);
782 if (!have_debounce(gpio, offset))
786 return enable_debounce(chip, offset, usecs);
788 return disable_debounce(chip, offset);
791 static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
792 unsigned long config)
794 unsigned long param = pinconf_to_config_param(config);
795 u32 arg = pinconf_to_config_argument(config);
797 if (param == PIN_CONFIG_INPUT_DEBOUNCE)
798 return set_debounce(chip, offset, arg);
799 else if (param == PIN_CONFIG_BIAS_DISABLE ||
800 param == PIN_CONFIG_BIAS_PULL_DOWN ||
801 param == PIN_CONFIG_DRIVE_STRENGTH)
802 return pinctrl_gpio_set_config(offset, config);
803 else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
804 param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
805 /* Return -ENOTSUPP to trigger emulation, as per datasheet */
807 else if (param == PIN_CONFIG_PERSIST_STATE)
808 return aspeed_gpio_reset_tolerance(chip, offset, arg);
814 * Any banks not specified in a struct aspeed_bank_props array are assumed to
815 * have the properties:
817 * { .input = 0xffffffff, .output = 0xffffffff }
820 static const struct aspeed_bank_props ast2400_bank_props[] = {
822 { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
823 { 6, 0x0000000f, 0x0fffff0f }, /* Y/Z/AA/AB, two 4-GPIO holes */
827 static const struct aspeed_gpio_config ast2400_config =
828 /* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */
829 { .nr_gpios = 220, .props = ast2400_bank_props, };
831 static const struct aspeed_bank_props ast2500_bank_props[] = {
833 { 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
834 { 6, 0x0fffffff, 0x0fffffff }, /* Y/Z/AA/AB, 4-GPIO hole */
835 { 7, 0x000000ff, 0x000000ff }, /* AC */
839 static const struct aspeed_gpio_config ast2500_config =
840 /* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */
841 { .nr_gpios = 232, .props = ast2500_bank_props, };
843 static const struct of_device_id aspeed_gpio_of_table[] = {
844 { .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, },
845 { .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, },
848 MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table);
850 static int __init aspeed_gpio_probe(struct platform_device *pdev)
852 const struct of_device_id *gpio_id;
853 struct aspeed_gpio *gpio;
854 struct resource *res;
857 gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
861 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
862 gpio->base = devm_ioremap_resource(&pdev->dev, res);
863 if (IS_ERR(gpio->base))
864 return PTR_ERR(gpio->base);
866 spin_lock_init(&gpio->lock);
868 gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
872 gpio->clk = of_clk_get(pdev->dev.of_node, 0);
873 if (IS_ERR(gpio->clk)) {
875 "Failed to get clock from devicetree, debouncing disabled\n");
879 gpio->config = gpio_id->data;
881 gpio->chip.parent = &pdev->dev;
882 gpio->chip.ngpio = gpio->config->nr_gpios;
883 gpio->chip.parent = &pdev->dev;
884 gpio->chip.direction_input = aspeed_gpio_dir_in;
885 gpio->chip.direction_output = aspeed_gpio_dir_out;
886 gpio->chip.get_direction = aspeed_gpio_get_direction;
887 gpio->chip.request = aspeed_gpio_request;
888 gpio->chip.free = aspeed_gpio_free;
889 gpio->chip.get = aspeed_gpio_get;
890 gpio->chip.set = aspeed_gpio_set;
891 gpio->chip.set_config = aspeed_gpio_set_config;
892 gpio->chip.label = dev_name(&pdev->dev);
893 gpio->chip.base = -1;
894 gpio->chip.irq.need_valid_mask = true;
896 rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
901 devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);
903 return aspeed_gpio_setup_irqs(gpio, pdev);
906 static struct platform_driver aspeed_gpio_driver = {
908 .name = KBUILD_MODNAME,
909 .of_match_table = aspeed_gpio_of_table,
913 module_platform_driver_probe(aspeed_gpio_driver, aspeed_gpio_probe);
915 MODULE_DESCRIPTION("Aspeed GPIO Driver");
916 MODULE_LICENSE("GPL");