1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Generic System Framebuffers
4 * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
8 * simple-framebuffer probing
9 * Try to convert "screen_info" into a "simple-framebuffer" compatible mode.
10 * If the mode is incompatible, we return "false" and let the caller create
11 * legacy nodes instead.
14 #include <linux/err.h>
15 #include <linux/init.h>
16 #include <linux/kernel.h>
18 #include <linux/platform_data/simplefb.h>
19 #include <linux/platform_device.h>
20 #include <linux/screen_info.h>
21 #include <linux/sysfb.h>
23 static const char simplefb_resname[] = "BOOTFB";
24 static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
26 /* try parsing screen_info into a simple-framebuffer mode struct */
27 __init bool sysfb_parse_mode(const struct screen_info *si,
28 struct simplefb_platform_data *mode)
34 type = si->orig_video_isVGA;
35 if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI)
39 * The meaning of depth and bpp for direct-color formats is
42 * - DRM format info specifies depth as the number of color
43 * bits; including alpha, but not including filler bits.
44 * - Linux' EFI platform code computes lfb_depth from the
45 * individual color channels, including the reserved bits.
46 * - VBE 1.1 defines lfb_depth for XRGB1555 as 16, but later
48 * - On the kernel command line, 'bpp' of 32 is usually
49 * XRGB8888 including the filler bits, but 15 is XRGB1555
50 * not including the filler bit.
52 * It's not easily possible to fix this in struct screen_info,
53 * as this could break UAPI. The best solution is to compute
54 * bits_per_pixel from the color bits, reserved bits and
55 * reported lfb_depth, whichever is highest. In the loop below,
56 * ignore simplefb formats with alpha bits, as EFI and VESA
57 * don't specify alpha channels.
59 if (si->lfb_depth > 8) {
60 bits_per_pixel = max(max3(si->red_size + si->red_pos,
61 si->green_size + si->green_pos,
62 si->blue_size + si->blue_pos),
63 si->rsvd_size + si->rsvd_pos);
64 bits_per_pixel = max_t(u32, bits_per_pixel, si->lfb_depth);
66 bits_per_pixel = si->lfb_depth;
69 for (i = 0; i < ARRAY_SIZE(formats); ++i) {
70 const struct simplefb_format *f = &formats[i];
73 continue; /* transparent formats are unsupported by VESA/EFI */
75 if (bits_per_pixel == f->bits_per_pixel &&
76 si->red_size == f->red.length &&
77 si->red_pos == f->red.offset &&
78 si->green_size == f->green.length &&
79 si->green_pos == f->green.offset &&
80 si->blue_size == f->blue.length &&
81 si->blue_pos == f->blue.offset) {
82 mode->format = f->name;
83 mode->width = si->lfb_width;
84 mode->height = si->lfb_height;
85 mode->stride = si->lfb_linelength;
93 __init struct platform_device *sysfb_create_simplefb(const struct screen_info *si,
94 const struct simplefb_platform_data *mode)
96 struct platform_device *pd;
103 * If the 64BIT_BASE capability is set, ext_lfb_base will contain the
104 * upper half of the base address. Assemble the address, then make sure
105 * it is valid and we can actually access it.
108 if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE)
109 base |= (u64)si->ext_lfb_base << 32;
110 if (!base || (u64)(resource_size_t)base != base) {
111 printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n");
112 return ERR_PTR(-EINVAL);
116 * Don't use lfb_size as IORESOURCE size, since it may contain the
117 * entire VMEM, and thus require huge mappings. Use just the part we
118 * need, that is, the part where the framebuffer is located. But verify
119 * that it does not exceed the advertised VMEM.
120 * Note that in case of VBE, the lfb_size is shifted by 16 bits for
121 * historical reasons.
124 if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
126 length = mode->height * mode->stride;
128 printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
129 return ERR_PTR(-EINVAL);
131 length = PAGE_ALIGN(length);
133 /* setup IORESOURCE_MEM as framebuffer memory */
134 memset(&res, 0, sizeof(res));
135 res.flags = IORESOURCE_MEM;
136 res.name = simplefb_resname;
138 res.end = res.start + length - 1;
139 if (res.end <= res.start)
140 return ERR_PTR(-EINVAL);
142 pd = platform_device_alloc("simple-framebuffer", 0);
144 return ERR_PTR(-ENOMEM);
146 sysfb_set_efifb_fwnode(pd);
148 ret = platform_device_add_resources(pd, &res, 1);
152 ret = platform_device_add_data(pd, mode, sizeof(*mode));
156 ret = platform_device_add(pd);
163 platform_device_put(pd);