drivers/extcon/extcon-sm5502.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * extcon-sm5502.c - Silicon Mitus SM5502 extcon drvier to support USB switches
   4  *
   5  * Copyright (c) 2014 Samsung Electronics Co., Ltd
   6  * Author: Chanwoo Choi <cw00.choi@samsung.com>
   7  */
   8
   9 #include <linux/err.h>
  10 #include <linux/i2c.h>
  11 #include <linux/interrupt.h>
  12 #include <linux/irqdomain.h>
  13 #include <linux/kernel.h>
  14 #include <linux/module.h>
  15 #include <linux/platform_device.h>
  16 #include <linux/regmap.h>
  17 #include <linux/slab.h>
  18 #include <linux/extcon-provider.h>
  19
  20 #include "extcon-sm5502.h"
  21
  22 #define DELAY_MS_DEFAULT                17000   /* unit: millisecond */
  23
  24 struct muic_irq {
  25         unsigned int irq;
  26         const char *name;
  27         unsigned int virq;
  28 };
  29
  30 struct reg_data {
  31         u8 reg;
  32         unsigned int val;
  33         bool invert;
  34 };
  35
  36 struct sm5502_muic_info {
  37         struct device *dev;
  38         struct extcon_dev *edev;
  39
  40         struct i2c_client *i2c;
  41         struct regmap *regmap;
  42
  43         const struct sm5502_type *type;
  44         struct regmap_irq_chip_data *irq_data;
  45         int irq;
  46         bool irq_attach;
  47         bool irq_detach;
  48         struct work_struct irq_work;
  49
  50         struct mutex mutex;
  51
  52         /*
  53          * Use delayed workqueue to detect cable state and then
  54          * notify cable state to notifiee/platform through uevent.
  55          * After completing the booting of platform, the extcon provider
  56          * driver should notify cable state to upper layer.
  57          */
  58         struct delayed_work wq_detcable;
  59 };
  60
  61 struct sm5502_type {
  62         struct muic_irq *muic_irqs;
  63         unsigned int num_muic_irqs;
  64         const struct regmap_irq_chip *irq_chip;
  65
  66         struct reg_data *reg_data;
  67         unsigned int num_reg_data;
  68
  69         unsigned int otg_dev_type1;
  70         int (*parse_irq)(struct sm5502_muic_info *info, int irq_type);
  71 };
  72
  73 /* Default value of SM5502 register to bring up MUIC device. */
  74 static struct reg_data sm5502_reg_data[] = {
  75         {
  76                 .reg = SM5502_REG_RESET,
  77                 .val = SM5502_REG_RESET_MASK,
  78                 .invert = true,
  79         }, {
  80                 .reg = SM5502_REG_CONTROL,
  81                 .val = SM5502_REG_CONTROL_MASK_INT_MASK,
  82                 .invert = false,
  83         }, {
  84                 .reg = SM5502_REG_INTMASK1,
  85                 .val = SM5502_REG_INTM1_KP_MASK
  86                         | SM5502_REG_INTM1_LKP_MASK
  87                         | SM5502_REG_INTM1_LKR_MASK,
  88                 .invert = true,
  89         }, {
  90                 .reg = SM5502_REG_INTMASK2,
  91                 .val = SM5502_REG_INTM2_VBUS_DET_MASK
  92                         | SM5502_REG_INTM2_REV_ACCE_MASK
  93                         | SM5502_REG_INTM2_ADC_CHG_MASK
  94                         | SM5502_REG_INTM2_STUCK_KEY_MASK
  95                         | SM5502_REG_INTM2_STUCK_KEY_RCV_MASK
  96                         | SM5502_REG_INTM2_MHL_MASK,
  97                 .invert = true,
  98         },
  99 };
 100
 101 /* Default value of SM5504 register to bring up MUIC device. */
 102 static struct reg_data sm5504_reg_data[] = {
 103         {
 104                 .reg = SM5502_REG_RESET,
 105                 .val = SM5502_REG_RESET_MASK,
 106                 .invert = true,
 107         }, {
 108                 .reg = SM5502_REG_INTMASK1,
 109                 .val = SM5504_REG_INTM1_ATTACH_MASK
 110                         | SM5504_REG_INTM1_DETACH_MASK,
 111                 .invert = false,
 112         }, {
 113                 .reg = SM5502_REG_INTMASK2,
 114                 .val = SM5504_REG_INTM2_RID_CHG_MASK
 115                         | SM5504_REG_INTM2_UVLO_MASK
 116                         | SM5504_REG_INTM2_POR_MASK,
 117                 .invert = true,
 118         }, {
 119                 .reg = SM5502_REG_CONTROL,
 120                 .val = SM5502_REG_CONTROL_MANUAL_SW_MASK
 121                         | SM5504_REG_CONTROL_CHGTYP_MASK
 122                         | SM5504_REG_CONTROL_USBCHDEN_MASK
 123                         | SM5504_REG_CONTROL_ADC_EN_MASK,
 124                 .invert = true,
 125         },
 126 };
 127
 128 /* List of detectable cables */
 129 static const unsigned int sm5502_extcon_cable[] = {
 130         EXTCON_USB,
 131         EXTCON_USB_HOST,
 132         EXTCON_CHG_USB_SDP,
 133         EXTCON_CHG_USB_DCP,
 134         EXTCON_NONE,
 135 };
 136
 137 /* Define supported accessory type */
 138 enum sm5502_muic_acc_type {
 139         SM5502_MUIC_ADC_GROUND = 0x0,
 140         SM5502_MUIC_ADC_SEND_END_BUTTON,
 141         SM5502_MUIC_ADC_REMOTE_S1_BUTTON,
 142         SM5502_MUIC_ADC_REMOTE_S2_BUTTON,
 143         SM5502_MUIC_ADC_REMOTE_S3_BUTTON,
 144         SM5502_MUIC_ADC_REMOTE_S4_BUTTON,
 145         SM5502_MUIC_ADC_REMOTE_S5_BUTTON,
 146         SM5502_MUIC_ADC_REMOTE_S6_BUTTON,
 147         SM5502_MUIC_ADC_REMOTE_S7_BUTTON,
 148         SM5502_MUIC_ADC_REMOTE_S8_BUTTON,
 149         SM5502_MUIC_ADC_REMOTE_S9_BUTTON,
 150         SM5502_MUIC_ADC_REMOTE_S10_BUTTON,
 151         SM5502_MUIC_ADC_REMOTE_S11_BUTTON,
 152         SM5502_MUIC_ADC_REMOTE_S12_BUTTON,
 153         SM5502_MUIC_ADC_RESERVED_ACC_1,
 154         SM5502_MUIC_ADC_RESERVED_ACC_2,
 155         SM5502_MUIC_ADC_RESERVED_ACC_3,
 156         SM5502_MUIC_ADC_RESERVED_ACC_4,
 157         SM5502_MUIC_ADC_RESERVED_ACC_5,
 158         SM5502_MUIC_ADC_AUDIO_TYPE2,
 159         SM5502_MUIC_ADC_PHONE_POWERED_DEV,
 160         SM5502_MUIC_ADC_TTY_CONVERTER,
 161         SM5502_MUIC_ADC_UART_CABLE,
 162         SM5502_MUIC_ADC_TYPE1_CHARGER,
 163         SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB,
 164         SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB,
 165         SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE,
 166         SM5502_MUIC_ADC_TYPE2_CHARGER,
 167         SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART,
 168         SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART,
 169         SM5502_MUIC_ADC_AUDIO_TYPE1,
 170         SM5502_MUIC_ADC_OPEN = 0x1f,
 171
 172         /*
 173          * The below accessories have same ADC value (0x1f or 0x1e).
 174          * So, Device type1 is used to separate specific accessory.
 175          */
 176                                                         /* |---------|--ADC| */
 177                                                         /* |    [7:5]|[4:0]| */
 178         SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e, /* |      001|11110| */
 179         SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e,    /* |      010|11110| */
 180                                                         /* |Dev Type1|--ADC| */
 181         SM5502_MUIC_ADC_GROUND_USB_OTG = 0x80,          /* |      100|00000| */
 182         SM5502_MUIC_ADC_OPEN_USB = 0x5f,                /* |      010|11111| */
 183         SM5502_MUIC_ADC_OPEN_TA = 0xdf,                 /* |      110|11111| */
 184         SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff,            /* |      111|11111| */
 185 };
 186
 187 /* List of supported interrupt for SM5502 */
 188 static struct muic_irq sm5502_muic_irqs[] = {
 189         { SM5502_IRQ_INT1_ATTACH,       "muic-attach" },
 190         { SM5502_IRQ_INT1_DETACH,       "muic-detach" },
 191         { SM5502_IRQ_INT1_KP,           "muic-kp" },
 192         { SM5502_IRQ_INT1_LKP,          "muic-lkp" },
 193         { SM5502_IRQ_INT1_LKR,          "muic-lkr" },
 194         { SM5502_IRQ_INT1_OVP_EVENT,    "muic-ovp-event" },
 195         { SM5502_IRQ_INT1_OCP_EVENT,    "muic-ocp-event" },
 196         { SM5502_IRQ_INT1_OVP_OCP_DIS,  "muic-ovp-ocp-dis" },
 197         { SM5502_IRQ_INT2_VBUS_DET,     "muic-vbus-det" },
 198         { SM5502_IRQ_INT2_REV_ACCE,     "muic-rev-acce" },
 199         { SM5502_IRQ_INT2_ADC_CHG,      "muic-adc-chg" },
 200         { SM5502_IRQ_INT2_STUCK_KEY,    "muic-stuck-key" },
 201         { SM5502_IRQ_INT2_STUCK_KEY_RCV, "muic-stuck-key-rcv" },
 202         { SM5502_IRQ_INT2_MHL,          "muic-mhl" },
 203 };
 204
 205 /* Define interrupt list of SM5502 to register regmap_irq */
 206 static const struct regmap_irq sm5502_irqs[] = {
 207         /* INT1 interrupts */
 208         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_ATTACH_MASK, },
 209         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_DETACH_MASK, },
 210         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_KP_MASK, },
 211         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKP_MASK, },
 212         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKR_MASK, },
 213         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_EVENT_MASK, },
 214         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OCP_EVENT_MASK, },
 215         { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_OCP_DIS_MASK, },
 216
 217         /* INT2 interrupts */
 218         { .reg_offset = 1, .mask = SM5502_IRQ_INT2_VBUS_DET_MASK,},
 219         { .reg_offset = 1, .mask = SM5502_IRQ_INT2_REV_ACCE_MASK, },
 220         { .reg_offset = 1, .mask = SM5502_IRQ_INT2_ADC_CHG_MASK, },
 221         { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_MASK, },
 222         { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK, },
 223         { .reg_offset = 1, .mask = SM5502_IRQ_INT2_MHL_MASK, },
 224 };
 225
 226 static const struct regmap_irq_chip sm5502_muic_irq_chip = {
 227         .name                   = "sm5502",
 228         .status_base            = SM5502_REG_INT1,
 229         .mask_base              = SM5502_REG_INTMASK1,
 230         .num_regs               = 2,
 231         .irqs                   = sm5502_irqs,
 232         .num_irqs               = ARRAY_SIZE(sm5502_irqs),
 233 };
 234
 235 /* List of supported interrupt for SM5504 */
 236 static struct muic_irq sm5504_muic_irqs[] = {
 237         { SM5504_IRQ_INT1_ATTACH,       "muic-attach" },
 238         { SM5504_IRQ_INT1_DETACH,       "muic-detach" },
 239         { SM5504_IRQ_INT1_CHG_DET,      "muic-chg-det" },
 240         { SM5504_IRQ_INT1_DCD_OUT,      "muic-dcd-out" },
 241         { SM5504_IRQ_INT1_OVP_EVENT,    "muic-ovp-event" },
 242         { SM5504_IRQ_INT1_CONNECT,      "muic-connect" },
 243         { SM5504_IRQ_INT1_ADC_CHG,      "muic-adc-chg" },
 244         { SM5504_IRQ_INT2_RID_CHG,      "muic-rid-chg" },
 245         { SM5504_IRQ_INT2_UVLO,         "muic-uvlo" },
 246         { SM5504_IRQ_INT2_POR,          "muic-por" },
 247         { SM5504_IRQ_INT2_OVP_FET,      "muic-ovp-fet" },
 248         { SM5504_IRQ_INT2_OCP_LATCH,    "muic-ocp-latch" },
 249         { SM5504_IRQ_INT2_OCP_EVENT,    "muic-ocp-event" },
 250         { SM5504_IRQ_INT2_OVP_OCP_EVENT, "muic-ovp-ocp-event" },
 251 };
 252
 253 /* Define interrupt list of SM5504 to register regmap_irq */
 254 static const struct regmap_irq sm5504_irqs[] = {
 255         /* INT1 interrupts */
 256         { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ATTACH_MASK, },
 257         { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DETACH_MASK, },
 258         { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CHG_DET_MASK, },
 259         { .reg_offset = 0, .mask = SM5504_IRQ_INT1_DCD_OUT_MASK, },
 260         { .reg_offset = 0, .mask = SM5504_IRQ_INT1_OVP_MASK, },
 261         { .reg_offset = 0, .mask = SM5504_IRQ_INT1_CONNECT_MASK, },
 262         { .reg_offset = 0, .mask = SM5504_IRQ_INT1_ADC_CHG_MASK, },
 263
 264         /* INT2 interrupts */
 265         { .reg_offset = 1, .mask = SM5504_IRQ_INT2_RID_CHG_MASK,},
 266         { .reg_offset = 1, .mask = SM5504_IRQ_INT2_UVLO_MASK, },
 267         { .reg_offset = 1, .mask = SM5504_IRQ_INT2_POR_MASK, },
 268         { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_FET_MASK, },
 269         { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_LATCH_MASK, },
 270         { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_EVENT_MASK, },
 271         { .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK, },
 272 };
 273
 274 static const struct regmap_irq_chip sm5504_muic_irq_chip = {
 275         .name                   = "sm5504",
 276         .status_base            = SM5502_REG_INT1,
 277         .mask_base              = SM5502_REG_INTMASK1,
 278         .num_regs               = 2,
 279         .irqs                   = sm5504_irqs,
 280         .num_irqs               = ARRAY_SIZE(sm5504_irqs),
 281 };
 282
 283 /* Define regmap configuration of SM5502 for I2C communication  */
 284 static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
 285 {
 286         switch (reg) {
 287         case SM5502_REG_INTMASK1:
 288         case SM5502_REG_INTMASK2:
 289                 return true;
 290         default:
 291                 break;
 292         }
 293         return false;
 294 }
 295
 296 static const struct regmap_config sm5502_muic_regmap_config = {
 297         .reg_bits       = 8,
 298         .val_bits       = 8,
 299         .volatile_reg   = sm5502_muic_volatile_reg,
 300         .max_register   = SM5502_REG_END,
 301 };
 302
 303 /* Change DM_CON/DP_CON/VBUSIN switch according to cable type */
 304 static int sm5502_muic_set_path(struct sm5502_muic_info *info,
 305                                 unsigned int con_sw, unsigned int vbus_sw,
 306                                 bool attached)
 307 {
 308         int ret;
 309
 310         if (!attached) {
 311                 con_sw  = DM_DP_SWITCH_OPEN;
 312                 vbus_sw = VBUSIN_SWITCH_OPEN;
 313         }
 314
 315         switch (con_sw) {
 316         case DM_DP_SWITCH_OPEN:
 317         case DM_DP_SWITCH_USB:
 318         case DM_DP_SWITCH_AUDIO:
 319         case DM_DP_SWITCH_UART:
 320                 ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
 321                                          SM5502_REG_MANUAL_SW1_DP_MASK |
 322                                          SM5502_REG_MANUAL_SW1_DM_MASK,
 323                                          con_sw);
 324                 if (ret < 0) {
 325                         dev_err(info->dev,
 326                                 "cannot update DM_CON/DP_CON switch\n");
 327                         return ret;
 328                 }
 329                 break;
 330         default:
 331                 dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n",
 332                                 con_sw);
 333                 return -EINVAL;
 334         }
 335
 336         switch (vbus_sw) {
 337         case VBUSIN_SWITCH_OPEN:
 338         case VBUSIN_SWITCH_VBUSOUT:
 339         case VBUSIN_SWITCH_MIC:
 340         case VBUSIN_SWITCH_VBUSOUT_WITH_USB:
 341                 ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
 342                                          SM5502_REG_MANUAL_SW1_VBUSIN_MASK,
 343                                          vbus_sw);
 344                 if (ret < 0) {
 345                         dev_err(info->dev,
 346                                 "cannot update VBUSIN switch\n");
 347                         return ret;
 348                 }
 349                 break;
 350         default:
 351                 dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw);
 352                 return -EINVAL;
 353         }
 354
 355         return 0;
 356 }
 357
 358 /* Return cable type of attached or detached accessories */
 359 static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 360 {
 361         unsigned int cable_type, adc, dev_type1;
 362         int ret;
 363
 364         /* Read ADC value according to external cable or button */
 365         ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc);
 366         if (ret) {
 367                 dev_err(info->dev, "failed to read ADC register\n");
 368                 return ret;
 369         }
 370
 371         /*
 372          * If ADC is SM5502_MUIC_ADC_GROUND(0x0), external cable hasn't
 373          * connected with to MUIC device.
 374          */
 375         cable_type = adc & SM5502_REG_ADC_MASK;
 376
 377         switch (cable_type) {
 378         case SM5502_MUIC_ADC_GROUND:
 379                 ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
 380                                   &dev_type1);
 381                 if (ret) {
 382                         dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
 383                         return ret;
 384                 }
 385
 386                 if (dev_type1 == info->type->otg_dev_type1) {
 387                         cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
 388                 } else {
 389                         dev_dbg(info->dev,
 390                                 "cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
 391                                 adc, dev_type1);
 392                         return -EINVAL;
 393                 }
 394                 break;
 395         case SM5502_MUIC_ADC_SEND_END_BUTTON:
 396         case SM5502_MUIC_ADC_REMOTE_S1_BUTTON:
 397         case SM5502_MUIC_ADC_REMOTE_S2_BUTTON:
 398         case SM5502_MUIC_ADC_REMOTE_S3_BUTTON:
 399         case SM5502_MUIC_ADC_REMOTE_S4_BUTTON:
 400         case SM5502_MUIC_ADC_REMOTE_S5_BUTTON:
 401         case SM5502_MUIC_ADC_REMOTE_S6_BUTTON:
 402         case SM5502_MUIC_ADC_REMOTE_S7_BUTTON:
 403         case SM5502_MUIC_ADC_REMOTE_S8_BUTTON:
 404         case SM5502_MUIC_ADC_REMOTE_S9_BUTTON:
 405         case SM5502_MUIC_ADC_REMOTE_S10_BUTTON:
 406         case SM5502_MUIC_ADC_REMOTE_S11_BUTTON:
 407         case SM5502_MUIC_ADC_REMOTE_S12_BUTTON:
 408         case SM5502_MUIC_ADC_RESERVED_ACC_1:
 409         case SM5502_MUIC_ADC_RESERVED_ACC_2:
 410         case SM5502_MUIC_ADC_RESERVED_ACC_3:
 411         case SM5502_MUIC_ADC_RESERVED_ACC_4:
 412         case SM5502_MUIC_ADC_RESERVED_ACC_5:
 413         case SM5502_MUIC_ADC_AUDIO_TYPE2:
 414         case SM5502_MUIC_ADC_PHONE_POWERED_DEV:
 415         case SM5502_MUIC_ADC_TTY_CONVERTER:
 416         case SM5502_MUIC_ADC_UART_CABLE:
 417         case SM5502_MUIC_ADC_TYPE1_CHARGER:
 418         case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
 419         case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
 420         case SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE:
 421         case SM5502_MUIC_ADC_TYPE2_CHARGER:
 422         case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
 423         case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
 424                 break;
 425         case SM5502_MUIC_ADC_AUDIO_TYPE1:
 426                 /*
 427                  * Check whether cable type is
 428                  * SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE
 429                  * or SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END
 430                  * by using Button event.
 431                  */
 432                 break;
 433         case SM5502_MUIC_ADC_OPEN:
 434                 ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
 435                                   &dev_type1);
 436                 if (ret) {
 437                         dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
 438                         return ret;
 439                 }
 440
 441                 if (dev_type1 == info->type->otg_dev_type1) {
 442                         cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
 443                         break;
 444                 }
 445
 446                 switch (dev_type1) {
 447                 case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
 448                         cable_type = SM5502_MUIC_ADC_OPEN_USB;
 449                         break;
 450                 case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
 451                         cable_type = SM5502_MUIC_ADC_OPEN_TA;
 452                         break;
 453                 default:
 454                         dev_dbg(info->dev,
 455                                 "cannot identify the cable type: adc(0x%x)\n",
 456                                 adc);
 457                         return -EINVAL;
 458                 }
 459                 break;
 460         default:
 461                 dev_err(info->dev,
 462                         "failed to identify the cable type: adc(0x%x)\n", adc);
 463                 return -EINVAL;
 464         }
 465
 466         return cable_type;
 467 }
 468
 469 static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 470                                      bool attached)
 471 {
 472         static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
 473         unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
 474         unsigned int con_sw = DM_DP_SWITCH_OPEN;
 475         unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
 476         unsigned int id;
 477         int ret;
 478
 479         /* Get the type of attached or detached cable */
 480         if (attached)
 481                 cable_type = sm5502_muic_get_cable_type(info);
 482         else
 483                 cable_type = prev_cable_type;
 484         prev_cable_type = cable_type;
 485
 486         switch (cable_type) {
 487         case SM5502_MUIC_ADC_OPEN_USB:
 488                 id      = EXTCON_USB;
 489                 con_sw  = DM_DP_SWITCH_USB;
 490                 vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB;
 491                 break;
 492         case SM5502_MUIC_ADC_OPEN_TA:
 493                 id      = EXTCON_CHG_USB_DCP;
 494                 con_sw  = DM_DP_SWITCH_OPEN;
 495                 vbus_sw = VBUSIN_SWITCH_VBUSOUT;
 496                 break;
 497         case SM5502_MUIC_ADC_GROUND_USB_OTG:
 498         case SM5502_MUIC_ADC_OPEN_USB_OTG:
 499                 id      = EXTCON_USB_HOST;
 500                 con_sw  = DM_DP_SWITCH_USB;
 501                 vbus_sw = VBUSIN_SWITCH_OPEN;
 502                 break;
 503         default:
 504                 dev_dbg(info->dev,
 505                         "cannot handle this cable_type (0x%x)\n", cable_type);
 506                 return 0;
 507         }
 508
 509         /* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */
 510         ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached);
 511         if (ret < 0)
 512                 return ret;
 513
 514         /* Change the state of external accessory */
 515         extcon_set_state_sync(info->edev, id, attached);
 516         if (id == EXTCON_USB)
 517                 extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
 518                                         attached);
 519
 520         return 0;
 521 }
 522
 523 static void sm5502_muic_irq_work(struct work_struct *work)
 524 {
 525         struct sm5502_muic_info *info = container_of(work,
 526                         struct sm5502_muic_info, irq_work);
 527         int ret = 0;
 528
 529         if (!info->edev)
 530                 return;
 531
 532         mutex_lock(&info->mutex);
 533
 534         /* Detect attached or detached cables */
 535         if (info->irq_attach) {
 536                 ret = sm5502_muic_cable_handler(info, true);
 537                 info->irq_attach = false;
 538         }
 539         if (info->irq_detach) {
 540                 ret = sm5502_muic_cable_handler(info, false);
 541                 info->irq_detach = false;
 542         }
 543
 544         if (ret < 0)
 545                 dev_err(info->dev, "failed to handle MUIC interrupt\n");
 546
 547         mutex_unlock(&info->mutex);
 548 }
 549
 550 /*
 551  * Sets irq_attach or irq_detach in sm5502_muic_info and returns 0.
 552  * Returns -ESRCH if irq_type does not match registered IRQ for this dev type.
 553  */
 554 static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
 555 {
 556         switch (irq_type) {
 557         case SM5502_IRQ_INT1_ATTACH:
 558                 info->irq_attach = true;
 559                 break;
 560         case SM5502_IRQ_INT1_DETACH:
 561                 info->irq_detach = true;
 562                 break;
 563         case SM5502_IRQ_INT1_KP:
 564         case SM5502_IRQ_INT1_LKP:
 565         case SM5502_IRQ_INT1_LKR:
 566         case SM5502_IRQ_INT1_OVP_EVENT:
 567         case SM5502_IRQ_INT1_OCP_EVENT:
 568         case SM5502_IRQ_INT1_OVP_OCP_DIS:
 569         case SM5502_IRQ_INT2_VBUS_DET:
 570         case SM5502_IRQ_INT2_REV_ACCE:
 571         case SM5502_IRQ_INT2_ADC_CHG:
 572         case SM5502_IRQ_INT2_STUCK_KEY:
 573         case SM5502_IRQ_INT2_STUCK_KEY_RCV:
 574         case SM5502_IRQ_INT2_MHL:
 575         default:
 576                 break;
 577         }
 578
 579         return 0;
 580 }
 581
 582 static int sm5504_parse_irq(struct sm5502_muic_info *info, int irq_type)
 583 {
 584         switch (irq_type) {
 585         case SM5504_IRQ_INT1_ATTACH:
 586                 info->irq_attach = true;
 587                 break;
 588         case SM5504_IRQ_INT1_DETACH:
 589                 info->irq_detach = true;
 590                 break;
 591         case SM5504_IRQ_INT1_CHG_DET:
 592         case SM5504_IRQ_INT1_DCD_OUT:
 593         case SM5504_IRQ_INT1_OVP_EVENT:
 594         case SM5504_IRQ_INT1_CONNECT:
 595         case SM5504_IRQ_INT1_ADC_CHG:
 596         case SM5504_IRQ_INT2_RID_CHG:
 597         case SM5504_IRQ_INT2_UVLO:
 598         case SM5504_IRQ_INT2_POR:
 599         case SM5504_IRQ_INT2_OVP_FET:
 600         case SM5504_IRQ_INT2_OCP_LATCH:
 601         case SM5504_IRQ_INT2_OCP_EVENT:
 602         case SM5504_IRQ_INT2_OVP_OCP_EVENT:
 603         default:
 604                 break;
 605         }
 606
 607         return 0;
 608 }
 609
 610 static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
 611 {
 612         struct sm5502_muic_info *info = data;
 613         int i, irq_type = -1, ret;
 614
 615         for (i = 0; i < info->type->num_muic_irqs; i++)
 616                 if (irq == info->type->muic_irqs[i].virq)
 617                         irq_type = info->type->muic_irqs[i].irq;
 618
 619         ret = info->type->parse_irq(info, irq_type);
 620         if (ret < 0) {
 621                 dev_warn(info->dev, "cannot handle is interrupt:%d\n",
 622                                     irq_type);
 623                 return IRQ_HANDLED;
 624         }
 625         schedule_work(&info->irq_work);
 626
 627         return IRQ_HANDLED;
 628 }
 629
 630 static void sm5502_muic_detect_cable_wq(struct work_struct *work)
 631 {
 632         struct sm5502_muic_info *info = container_of(to_delayed_work(work),
 633                                 struct sm5502_muic_info, wq_detcable);
 634         int ret;
 635
 636         /* Notify the state of connector cable or not  */
 637         ret = sm5502_muic_cable_handler(info, true);
 638         if (ret < 0)
 639                 dev_warn(info->dev, "failed to detect cable state\n");
 640 }
 641
 642 static void sm5502_init_dev_type(struct sm5502_muic_info *info)
 643 {
 644         unsigned int reg_data, vendor_id, version_id;
 645         int i, ret;
 646
 647         /* To test I2C, Print version_id and vendor_id of SM5502 */
 648         ret = regmap_read(info->regmap, SM5502_REG_DEVICE_ID, &reg_data);
 649         if (ret) {
 650                 dev_err(info->dev,
 651                         "failed to read DEVICE_ID register: %d\n", ret);
 652                 return;
 653         }
 654
 655         vendor_id = ((reg_data & SM5502_REG_DEVICE_ID_VENDOR_MASK) >>
 656                                 SM5502_REG_DEVICE_ID_VENDOR_SHIFT);
 657         version_id = ((reg_data & SM5502_REG_DEVICE_ID_VERSION_MASK) >>
 658                                 SM5502_REG_DEVICE_ID_VERSION_SHIFT);
 659
 660         dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
 661                             version_id, vendor_id);
 662
 663         /* Initiazle the register of SM5502 device to bring-up */
 664         for (i = 0; i < info->type->num_reg_data; i++) {
 665                 unsigned int val = 0;
 666
 667                 if (!info->type->reg_data[i].invert)
 668                         val |= ~info->type->reg_data[i].val;
 669                 else
 670                         val = info->type->reg_data[i].val;
 671                 regmap_write(info->regmap, info->type->reg_data[i].reg, val);
 672         }
 673 }
 674
 675 static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
 676 {
 677         struct device_node *np = i2c->dev.of_node;
 678         struct sm5502_muic_info *info;
 679         int i, ret, irq_flags;
 680
 681         if (!np)
 682                 return -EINVAL;
 683
 684         info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
 685         if (!info)
 686                 return -ENOMEM;
 687         i2c_set_clientdata(i2c, info);
 688
 689         info->dev = &i2c->dev;
 690         info->i2c = i2c;
 691         info->irq = i2c->irq;
 692         info->type = device_get_match_data(info->dev);
 693         if (!info->type)
 694                 return -EINVAL;
 695         if (!info->type->parse_irq) {
 696                 dev_err(info->dev, "parse_irq missing in struct sm5502_type\n");
 697                 return -EINVAL;
 698         }
 699
 700         mutex_init(&info->mutex);
 701
 702         INIT_WORK(&info->irq_work, sm5502_muic_irq_work);
 703
 704         info->regmap = devm_regmap_init_i2c(i2c, &sm5502_muic_regmap_config);
 705         if (IS_ERR(info->regmap)) {
 706                 ret = PTR_ERR(info->regmap);
 707                 dev_err(info->dev, "failed to allocate register map: %d\n",
 708                                    ret);
 709                 return ret;
 710         }
 711
 712         /* Support irq domain for SM5502 MUIC device */
 713         irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
 714         ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq,
 715                                        irq_flags, 0, info->type->irq_chip,
 716                                        &info->irq_data);
 717         if (ret != 0) {
 718                 dev_err(info->dev, "failed to request IRQ %d: %d\n",
 719                                     info->irq, ret);
 720                 return ret;
 721         }
 722
 723         for (i = 0; i < info->type->num_muic_irqs; i++) {
 724                 struct muic_irq *muic_irq = &info->type->muic_irqs[i];
 725                 int virq = 0;
 726
 727                 virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
 728                 if (virq <= 0)
 729                         return -EINVAL;
 730                 muic_irq->virq = virq;
 731
 732                 ret = devm_request_threaded_irq(info->dev, virq, NULL,
 733                                                 sm5502_muic_irq_handler,
 734                                                 IRQF_NO_SUSPEND | IRQF_ONESHOT,
 735                                                 muic_irq->name, info);
 736                 if (ret) {
 737                         dev_err(info->dev,
 738                                 "failed: irq request (IRQ: %d, error :%d)\n",
 739                                 muic_irq->irq, ret);
 740                         return ret;
 741                 }
 742         }
 743
 744         /* Allocate extcon device */
 745         info->edev = devm_extcon_dev_allocate(info->dev, sm5502_extcon_cable);
 746         if (IS_ERR(info->edev)) {
 747                 dev_err(info->dev, "failed to allocate memory for extcon\n");
 748                 return -ENOMEM;
 749         }
 750
 751         /* Register extcon device */
 752         ret = devm_extcon_dev_register(info->dev, info->edev);
 753         if (ret) {
 754                 dev_err(info->dev, "failed to register extcon device\n");
 755                 return ret;
 756         }
 757
 758         /*
 759          * Detect accessory after completing the initialization of platform
 760          *
 761          * - Use delayed workqueue to detect cable state and then
 762          * notify cable state to notifiee/platform through uevent.
 763          * After completing the booting of platform, the extcon provider
 764          * driver should notify cable state to upper layer.
 765          */
 766         INIT_DELAYED_WORK(&info->wq_detcable, sm5502_muic_detect_cable_wq);
 767         queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
 768                         msecs_to_jiffies(DELAY_MS_DEFAULT));
 769
 770         /* Initialize SM5502 device and print vendor id and version id */
 771         sm5502_init_dev_type(info);
 772
 773         return 0;
 774 }
 775
 776 static const struct sm5502_type sm5502_data = {
 777         .muic_irqs = sm5502_muic_irqs,
 778         .num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs),
 779         .irq_chip = &sm5502_muic_irq_chip,
 780         .reg_data = sm5502_reg_data,
 781         .num_reg_data = ARRAY_SIZE(sm5502_reg_data),
 782         .otg_dev_type1 = SM5502_REG_DEV_TYPE1_USB_OTG_MASK,
 783         .parse_irq = sm5502_parse_irq,
 784 };
 785
 786 static const struct sm5502_type sm5504_data = {
 787         .muic_irqs = sm5504_muic_irqs,
 788         .num_muic_irqs = ARRAY_SIZE(sm5504_muic_irqs),
 789         .irq_chip = &sm5504_muic_irq_chip,
 790         .reg_data = sm5504_reg_data,
 791         .num_reg_data = ARRAY_SIZE(sm5504_reg_data),
 792         .otg_dev_type1 = SM5504_REG_DEV_TYPE1_USB_OTG_MASK,
 793         .parse_irq = sm5504_parse_irq,
 794 };
 795
 796 static const struct of_device_id sm5502_dt_match[] = {
 797         { .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data },
 798         { .compatible = "siliconmitus,sm5504-muic", .data = &sm5504_data },
 799         { .compatible = "siliconmitus,sm5703-muic", .data = &sm5502_data },
 800         { },
 801 };
 802 MODULE_DEVICE_TABLE(of, sm5502_dt_match);
 803
 804 #ifdef CONFIG_PM_SLEEP
 805 static int sm5502_muic_suspend(struct device *dev)
 806 {
 807         struct i2c_client *i2c = to_i2c_client(dev);
 808         struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
 809
 810         enable_irq_wake(info->irq);
 811
 812         return 0;
 813 }
 814
 815 static int sm5502_muic_resume(struct device *dev)
 816 {
 817         struct i2c_client *i2c = to_i2c_client(dev);
 818         struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
 819
 820         disable_irq_wake(info->irq);
 821
 822         return 0;
 823 }
 824 #endif
 825
 826 static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
 827                          sm5502_muic_suspend, sm5502_muic_resume);
 828
 829 static const struct i2c_device_id sm5502_i2c_id[] = {
 830         { "sm5502", (kernel_ulong_t)&sm5502_data },
 831         { "sm5504", (kernel_ulong_t)&sm5504_data },
 832         { "sm5703-muic", (kernel_ulong_t)&sm5502_data },
 833         { }
 834 };
 835 MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
 836
 837 static struct i2c_driver sm5502_muic_i2c_driver = {
 838         .driver         = {
 839                 .name   = "sm5502",
 840                 .pm     = &sm5502_muic_pm_ops,
 841                 .of_match_table = sm5502_dt_match,
 842         },
 843         .probe = sm5022_muic_i2c_probe,
 844         .id_table = sm5502_i2c_id,
 845 };
 846
 847 static int __init sm5502_muic_i2c_init(void)
 848 {
 849         return i2c_add_driver(&sm5502_muic_i2c_driver);
 850 }
 851 subsys_initcall(sm5502_muic_i2c_init);
 852
 853 MODULE_DESCRIPTION("Silicon Mitus SM5502 Extcon driver");
 854 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
 855 MODULE_LICENSE("GPL");