drivers/cpufreq/exynos-cpufreq.c

   1 /*
   2  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
   3  *              http://www.samsung.com
   4  *
   5  * EXYNOS - CPU frequency scaling support for EXYNOS series
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10 */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/err.h>
  14 #include <linux/clk.h>
  15 #include <linux/io.h>
  16 #include <linux/slab.h>
  17 #include <linux/regulator/consumer.h>
  18 #include <linux/cpufreq.h>
  19 #include <linux/suspend.h>
  20
  21 #include <mach/cpufreq.h>
  22
  23 #include <plat/cpu.h>
  24
  25 static struct exynos_dvfs_info *exynos_info;
  26
  27 static struct regulator *arm_regulator;
  28 static struct cpufreq_freqs freqs;
  29
  30 static unsigned int locking_frequency;
  31 static bool frequency_locked;
  32 static DEFINE_MUTEX(cpufreq_lock);
  33
  34 int exynos_verify_speed(struct cpufreq_policy *policy)
  35 {
  36         return cpufreq_frequency_table_verify(policy,
  37                                               exynos_info->freq_table);
  38 }
  39
  40 unsigned int exynos_getspeed(unsigned int cpu)
  41 {
  42         return clk_get_rate(exynos_info->cpu_clk) / 1000;
  43 }
  44
  45 static int exynos_target(struct cpufreq_policy *policy,
  46                           unsigned int target_freq,
  47                           unsigned int relation)
  48 {
  49         unsigned int index, old_index;
  50         unsigned int arm_volt, safe_arm_volt = 0;
  51         int ret = 0;
  52         struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
  53         unsigned int *volt_table = exynos_info->volt_table;
  54         unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
  55
  56         mutex_lock(&cpufreq_lock);
  57
  58         freqs.old = policy->cur;
  59
  60         if (frequency_locked && target_freq != locking_frequency) {
  61                 ret = -EAGAIN;
  62                 goto out;
  63         }
  64
  65         if (cpufreq_frequency_table_target(policy, freq_table,
  66                                            freqs.old, relation, &old_index)) {
  67                 ret = -EINVAL;
  68                 goto out;
  69         }
  70
  71         if (cpufreq_frequency_table_target(policy, freq_table,
  72                                            target_freq, relation, &index)) {
  73                 ret = -EINVAL;
  74                 goto out;
  75         }
  76
  77         freqs.new = freq_table[index].frequency;
  78         freqs.cpu = policy->cpu;
  79
  80         /*
  81          * ARM clock source will be changed APLL to MPLL temporary
  82          * To support this level, need to control regulator for
  83          * required voltage level
  84          */
  85         if (exynos_info->need_apll_change != NULL) {
  86                 if (exynos_info->need_apll_change(old_index, index) &&
  87                    (freq_table[index].frequency < mpll_freq_khz) &&
  88                    (freq_table[old_index].frequency < mpll_freq_khz))
  89                         safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
  90         }
  91         arm_volt = volt_table[index];
  92
  93         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
  94
  95         /* When the new frequency is higher than current frequency */
  96         if ((freqs.new > freqs.old) && !safe_arm_volt) {
  97                 /* Firstly, voltage up to increase frequency */
  98                 regulator_set_voltage(arm_regulator, arm_volt,
  99                                 arm_volt);
 100         }
 101
 102         if (safe_arm_volt)
 103                 regulator_set_voltage(arm_regulator, safe_arm_volt,
 104                                       safe_arm_volt);
 105         if (freqs.new != freqs.old)
 106                 exynos_info->set_freq(old_index, index);
 107
 108         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 109
 110         /* When the new frequency is lower than current frequency */
 111         if ((freqs.new < freqs.old) ||
 112            ((freqs.new > freqs.old) && safe_arm_volt)) {
 113                 /* down the voltage after frequency change */
 114                 regulator_set_voltage(arm_regulator, arm_volt,
 115                                 arm_volt);
 116         }
 117
 118 out:
 119         mutex_unlock(&cpufreq_lock);
 120
 121         return ret;
 122 }
 123
 124 #ifdef CONFIG_PM
 125 static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
 126 {
 127         return 0;
 128 }
 129
 130 static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
 131 {
 132         return 0;
 133 }
 134 #endif
 135
 136 /**
 137  * exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
 138  *                      context
 139  * @notifier
 140  * @pm_event
 141  * @v
 142  *
 143  * While frequency_locked == true, target() ignores every frequency but
 144  * locking_frequency. The locking_frequency value is the initial frequency,
 145  * which is set by the bootloader. In order to eliminate possible
 146  * inconsistency in clock values, we save and restore frequencies during
 147  * suspend and resume and block CPUFREQ activities. Note that the standard
 148  * suspend/resume cannot be used as they are too deep (syscore_ops) for
 149  * regulator actions.
 150  */
 151 static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
 152                                        unsigned long pm_event, void *v)
 153 {
 154         struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
 155         static unsigned int saved_frequency;
 156         unsigned int temp;
 157
 158         mutex_lock(&cpufreq_lock);
 159         switch (pm_event) {
 160         case PM_SUSPEND_PREPARE:
 161                 if (frequency_locked)
 162                         goto out;
 163
 164                 frequency_locked = true;
 165
 166                 if (locking_frequency) {
 167                         saved_frequency = exynos_getspeed(0);
 168
 169                         mutex_unlock(&cpufreq_lock);
 170                         exynos_target(policy, locking_frequency,
 171                                       CPUFREQ_RELATION_H);
 172                         mutex_lock(&cpufreq_lock);
 173                 }
 174                 break;
 175
 176         case PM_POST_SUSPEND:
 177                 if (saved_frequency) {
 178                         /*
 179                          * While frequency_locked, only locking_frequency
 180                          * is valid for target(). In order to use
 181                          * saved_frequency while keeping frequency_locked,
 182                          * we temporarly overwrite locking_frequency.
 183                          */
 184                         temp = locking_frequency;
 185                         locking_frequency = saved_frequency;
 186
 187                         mutex_unlock(&cpufreq_lock);
 188                         exynos_target(policy, locking_frequency,
 189                                       CPUFREQ_RELATION_H);
 190                         mutex_lock(&cpufreq_lock);
 191
 192                         locking_frequency = temp;
 193                 }
 194                 frequency_locked = false;
 195                 break;
 196         }
 197 out:
 198         mutex_unlock(&cpufreq_lock);
 199
 200         return NOTIFY_OK;
 201 }
 202
 203 static struct notifier_block exynos_cpufreq_nb = {
 204         .notifier_call = exynos_cpufreq_pm_notifier,
 205 };
 206
 207 static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
 208 {
 209         policy->cur = policy->min = policy->max = exynos_getspeed(policy->cpu);
 210
 211         cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
 212
 213         locking_frequency = exynos_getspeed(0);
 214
 215         /* set the transition latency value */
 216         policy->cpuinfo.transition_latency = 100000;
 217
 218         /*
 219          * EXYNOS4 multi-core processors has 2 cores
 220          * that the frequency cannot be set independently.
 221          * Each cpu is bound to the same speed.
 222          * So the affected cpu is all of the cpus.
 223          */
 224         if (num_online_cpus() == 1) {
 225                 cpumask_copy(policy->related_cpus, cpu_possible_mask);
 226                 cpumask_copy(policy->cpus, cpu_online_mask);
 227         } else {
 228                 cpumask_setall(policy->cpus);
 229         }
 230
 231         return cpufreq_frequency_table_cpuinfo(policy, exynos_info->freq_table);
 232 }
 233
 234 static struct cpufreq_driver exynos_driver = {
 235         .flags          = CPUFREQ_STICKY,
 236         .verify         = exynos_verify_speed,
 237         .target         = exynos_target,
 238         .get            = exynos_getspeed,
 239         .init           = exynos_cpufreq_cpu_init,
 240         .name           = "exynos_cpufreq",
 241 #ifdef CONFIG_PM
 242         .suspend        = exynos_cpufreq_suspend,
 243         .resume         = exynos_cpufreq_resume,
 244 #endif
 245 };
 246
 247 static int __init exynos_cpufreq_init(void)
 248 {
 249         int ret = -EINVAL;
 250
 251         exynos_info = kzalloc(sizeof(struct exynos_dvfs_info), GFP_KERNEL);
 252         if (!exynos_info)
 253                 return -ENOMEM;
 254
 255         if (soc_is_exynos4210())
 256                 ret = exynos4210_cpufreq_init(exynos_info);
 257         else if (soc_is_exynos4212() || soc_is_exynos4412())
 258                 ret = exynos4x12_cpufreq_init(exynos_info);
 259         else if (soc_is_exynos5250())
 260                 ret = exynos5250_cpufreq_init(exynos_info);
 261         else
 262                 pr_err("%s: CPU type not found\n", __func__);
 263
 264         if (ret)
 265                 goto err_vdd_arm;
 266
 267         if (exynos_info->set_freq == NULL) {
 268                 pr_err("%s: No set_freq function (ERR)\n", __func__);
 269                 goto err_vdd_arm;
 270         }
 271
 272         arm_regulator = regulator_get(NULL, "vdd_arm");
 273         if (IS_ERR(arm_regulator)) {
 274                 pr_err("%s: failed to get resource vdd_arm\n", __func__);
 275                 goto err_vdd_arm;
 276         }
 277
 278         register_pm_notifier(&exynos_cpufreq_nb);
 279
 280         if (cpufreq_register_driver(&exynos_driver)) {
 281                 pr_err("%s: failed to register cpufreq driver\n", __func__);
 282                 goto err_cpufreq;
 283         }
 284
 285         return 0;
 286 err_cpufreq:
 287         unregister_pm_notifier(&exynos_cpufreq_nb);
 288
 289         if (!IS_ERR(arm_regulator))
 290                 regulator_put(arm_regulator);
 291 err_vdd_arm:
 292         kfree(exynos_info);
 293         pr_debug("%s: failed initialization\n", __func__);
 294         return -EINVAL;
 295 }
 296 late_initcall(exynos_cpufreq_init);