drivers/clocksource/timer-loongson1-pwm.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Clocksource driver for Loongson-1 SoC
   4  *
   5  * Copyright (c) 2023 Keguang Zhang <keguang.zhang@gmail.com>
   6  */
   7
   8 #include <linux/clockchips.h>
   9 #include <linux/interrupt.h>
  10 #include <linux/sizes.h>
  11 #include "timer-of.h"
  12
  13 /* Loongson-1 PWM Timer Register Definitions */
  14 #define PWM_CNTR                0x0
  15 #define PWM_HRC                 0x4
  16 #define PWM_LRC                 0x8
  17 #define PWM_CTRL                0xc
  18
  19 /* PWM Control Register Bits */
  20 #define INT_LRC_EN              BIT(11)
  21 #define INT_HRC_EN              BIT(10)
  22 #define CNTR_RST                BIT(7)
  23 #define INT_SR                  BIT(6)
  24 #define INT_EN                  BIT(5)
  25 #define PWM_SINGLE              BIT(4)
  26 #define PWM_OE                  BIT(3)
  27 #define CNT_EN                  BIT(0)
  28
  29 #define CNTR_WIDTH              24
  30
  31 static DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
  32
  33 struct ls1x_clocksource {
  34         void __iomem *reg_base;
  35         unsigned long ticks_per_jiffy;
  36         struct clocksource clksrc;
  37 };
  38
  39 static inline struct ls1x_clocksource *to_ls1x_clksrc(struct clocksource *c)
  40 {
  41         return container_of(c, struct ls1x_clocksource, clksrc);
  42 }
  43
  44 static inline void ls1x_pwmtimer_set_period(unsigned int period,
  45                                             struct timer_of *to)
  46 {
  47         writel(period, timer_of_base(to) + PWM_LRC);
  48         writel(period, timer_of_base(to) + PWM_HRC);
  49 }
  50
  51 static inline void ls1x_pwmtimer_clear(struct timer_of *to)
  52 {
  53         writel(0, timer_of_base(to) + PWM_CNTR);
  54 }
  55
  56 static inline void ls1x_pwmtimer_start(struct timer_of *to)
  57 {
  58         writel((INT_EN | PWM_OE | CNT_EN), timer_of_base(to) + PWM_CTRL);
  59 }
  60
  61 static inline void ls1x_pwmtimer_stop(struct timer_of *to)
  62 {
  63         writel(0, timer_of_base(to) + PWM_CTRL);
  64 }
  65
  66 static inline void ls1x_pwmtimer_irq_ack(struct timer_of *to)
  67 {
  68         int val;
  69
  70         val = readl(timer_of_base(to) + PWM_CTRL);
  71         val |= INT_SR;
  72         writel(val, timer_of_base(to) + PWM_CTRL);
  73 }
  74
  75 static irqreturn_t ls1x_clockevent_isr(int irq, void *dev_id)
  76 {
  77         struct clock_event_device *clkevt = dev_id;
  78         struct timer_of *to = to_timer_of(clkevt);
  79
  80         ls1x_pwmtimer_irq_ack(to);
  81         ls1x_pwmtimer_clear(to);
  82         ls1x_pwmtimer_start(to);
  83
  84         clkevt->event_handler(clkevt);
  85
  86         return IRQ_HANDLED;
  87 }
  88
  89 static int ls1x_clockevent_set_state_periodic(struct clock_event_device *clkevt)
  90 {
  91         struct timer_of *to = to_timer_of(clkevt);
  92
  93         raw_spin_lock(&ls1x_timer_lock);
  94         ls1x_pwmtimer_set_period(timer_of_period(to), to);
  95         ls1x_pwmtimer_clear(to);
  96         ls1x_pwmtimer_start(to);
  97         raw_spin_unlock(&ls1x_timer_lock);
  98
  99         return 0;
 100 }
 101
 102 static int ls1x_clockevent_tick_resume(struct clock_event_device *clkevt)
 103 {
 104         raw_spin_lock(&ls1x_timer_lock);
 105         ls1x_pwmtimer_start(to_timer_of(clkevt));
 106         raw_spin_unlock(&ls1x_timer_lock);
 107
 108         return 0;
 109 }
 110
 111 static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *clkevt)
 112 {
 113         raw_spin_lock(&ls1x_timer_lock);
 114         ls1x_pwmtimer_stop(to_timer_of(clkevt));
 115         raw_spin_unlock(&ls1x_timer_lock);
 116
 117         return 0;
 118 }
 119
 120 static int ls1x_clockevent_set_next(unsigned long evt,
 121                                     struct clock_event_device *clkevt)
 122 {
 123         struct timer_of *to = to_timer_of(clkevt);
 124
 125         raw_spin_lock(&ls1x_timer_lock);
 126         ls1x_pwmtimer_set_period(evt, to);
 127         ls1x_pwmtimer_clear(to);
 128         ls1x_pwmtimer_start(to);
 129         raw_spin_unlock(&ls1x_timer_lock);
 130
 131         return 0;
 132 }
 133
 134 static struct timer_of ls1x_to = {
 135         .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
 136         .clkevt = {
 137                 .name                   = "ls1x-pwmtimer",
 138                 .features               = CLOCK_EVT_FEAT_PERIODIC |
 139                                           CLOCK_EVT_FEAT_ONESHOT,
 140                 .rating                 = 300,
 141                 .set_next_event         = ls1x_clockevent_set_next,
 142                 .set_state_periodic     = ls1x_clockevent_set_state_periodic,
 143                 .set_state_oneshot      = ls1x_clockevent_set_state_shutdown,
 144                 .set_state_shutdown     = ls1x_clockevent_set_state_shutdown,
 145                 .tick_resume            = ls1x_clockevent_tick_resume,
 146         },
 147         .of_irq = {
 148                 .handler                = ls1x_clockevent_isr,
 149                 .flags                  = IRQF_TIMER,
 150         },
 151 };
 152
 153 /*
 154  * Since the PWM timer overflows every two ticks, its not very useful
 155  * to just read by itself. So use jiffies to emulate a free
 156  * running counter:
 157  */
 158 static u64 ls1x_clocksource_read(struct clocksource *cs)
 159 {
 160         struct ls1x_clocksource *ls1x_cs = to_ls1x_clksrc(cs);
 161         unsigned long flags;
 162         int count;
 163         u32 jifs;
 164         static int old_count;
 165         static u32 old_jifs;
 166
 167         raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
 168         /*
 169          * Although our caller may have the read side of xtime_lock,
 170          * this is now a seqlock, and we are cheating in this routine
 171          * by having side effects on state that we cannot undo if
 172          * there is a collision on the seqlock and our caller has to
 173          * retry.  (Namely, old_jifs and old_count.)  So we must treat
 174          * jiffies as volatile despite the lock.  We read jiffies
 175          * before latching the timer count to guarantee that although
 176          * the jiffies value might be older than the count (that is,
 177          * the counter may underflow between the last point where
 178          * jiffies was incremented and the point where we latch the
 179          * count), it cannot be newer.
 180          */
 181         jifs = jiffies;
 182         /* read the count */
 183         count = readl(ls1x_cs->reg_base + PWM_CNTR);
 184
 185         /*
 186          * It's possible for count to appear to go the wrong way for this
 187          * reason:
 188          *
 189          *  The timer counter underflows, but we haven't handled the resulting
 190          *  interrupt and incremented jiffies yet.
 191          *
 192          * Previous attempts to handle these cases intelligently were buggy, so
 193          * we just do the simple thing now.
 194          */
 195         if (count < old_count && jifs == old_jifs)
 196                 count = old_count;
 197
 198         old_count = count;
 199         old_jifs = jifs;
 200
 201         raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
 202
 203         return (u64)(jifs * ls1x_cs->ticks_per_jiffy) + count;
 204 }
 205
 206 static struct ls1x_clocksource ls1x_clocksource = {
 207         .clksrc = {
 208                 .name           = "ls1x-pwmtimer",
 209                 .rating         = 300,
 210                 .read           = ls1x_clocksource_read,
 211                 .mask           = CLOCKSOURCE_MASK(CNTR_WIDTH),
 212                 .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 213         },
 214 };
 215
 216 static int __init ls1x_pwm_clocksource_init(struct device_node *np)
 217 {
 218         struct timer_of *to = &ls1x_to;
 219         int ret;
 220
 221         ret = timer_of_init(np, to);
 222         if (ret)
 223                 return ret;
 224
 225         clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
 226                                         0x1, GENMASK(CNTR_WIDTH - 1, 0));
 227
 228         ls1x_clocksource.reg_base = timer_of_base(to);
 229         ls1x_clocksource.ticks_per_jiffy = timer_of_period(to);
 230
 231         return clocksource_register_hz(&ls1x_clocksource.clksrc,
 232                                        timer_of_rate(to));
 233 }
 234
 235 TIMER_OF_DECLARE(ls1x_pwm_clocksource, "loongson,ls1b-pwmtimer",
 236                  ls1x_pwm_clocksource_init);