drivers/clk/clk_versaclock.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Driver for IDT Versaclock 5/6
   4  *
   5  * Derived from code Copyright (C) 2017 Marek Vasut <marek.vasut@gmail.com>
   6  */
   7
   8 #include <common.h>
   9 #include <clk.h>
  10 #include <clk-uclass.h>
  11 #include <dm.h>
  12 #include <errno.h>
  13 #include <i2c.h>
  14 #include <dm/device_compat.h>
  15 #include <log.h>
  16 #include <linux/clk-provider.h>
  17 #include <linux/kernel.h>
  18 #include <linux/math64.h>
  19
  20 #include <dt-bindings/clock/versaclock.h>
  21
  22 /* VersaClock5 registers */
  23 #define VC5_OTP_CONTROL                         0x00
  24
  25 /* Factory-reserved register block */
  26 #define VC5_RSVD_DEVICE_ID                      0x01
  27 #define VC5_RSVD_ADC_GAIN_7_0                   0x02
  28 #define VC5_RSVD_ADC_GAIN_15_8                  0x03
  29 #define VC5_RSVD_ADC_OFFSET_7_0                 0x04
  30 #define VC5_RSVD_ADC_OFFSET_15_8                0x05
  31 #define VC5_RSVD_TEMPY                          0x06
  32 #define VC5_RSVD_OFFSET_TBIN                    0x07
  33 #define VC5_RSVD_GAIN                           0x08
  34 #define VC5_RSVD_TEST_NP                        0x09
  35 #define VC5_RSVD_UNUSED                         0x0a
  36 #define VC5_RSVD_BANDGAP_TRIM_UP                0x0b
  37 #define VC5_RSVD_BANDGAP_TRIM_DN                0x0c
  38 #define VC5_RSVD_CLK_R_12_CLK_AMP_4             0x0d
  39 #define VC5_RSVD_CLK_R_34_CLK_AMP_4             0x0e
  40 #define VC5_RSVD_CLK_AMP_123                    0x0f
  41
  42 /* Configuration register block */
  43 #define VC5_PRIM_SRC_SHDN                       0x10
  44 #define VC5_PRIM_SRC_SHDN_EN_XTAL               BIT(7)
  45 #define VC5_PRIM_SRC_SHDN_EN_CLKIN              BIT(6)
  46 #define VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ   BIT(3)
  47 #define VC5_PRIM_SRC_SHDN_SP                    BIT(1)
  48 #define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN           BIT(0)
  49
  50 #define VC5_VCO_BAND                            0x11
  51 #define VC5_XTAL_X1_LOAD_CAP                    0x12
  52 #define VC5_XTAL_X2_LOAD_CAP                    0x13
  53 #define VC5_REF_DIVIDER                         0x15
  54 #define VC5_REF_DIVIDER_SEL_PREDIV2             BIT(7)
  55 #define VC5_REF_DIVIDER_REF_DIV(n)              ((n) & 0x3f)
  56
  57 #define VC5_VCO_CTRL_AND_PREDIV                 0x16
  58 #define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV   BIT(7)
  59
  60 #define VC5_FEEDBACK_INT_DIV                    0x17
  61 #define VC5_FEEDBACK_INT_DIV_BITS               0x18
  62 #define VC5_FEEDBACK_FRAC_DIV(n)                (0x19 + (n))
  63 #define VC5_RC_CONTROL0                         0x1e
  64 #define VC5_RC_CONTROL1                         0x1f
  65 /* Register 0x20 is factory reserved */
  66
  67 /* Output divider control for divider 1,2,3,4 */
  68 #define VC5_OUT_DIV_CONTROL(idx)        (0x21 + ((idx) * 0x10))
  69 #define VC5_OUT_DIV_CONTROL_RESET       BIT(7)
  70 #define VC5_OUT_DIV_CONTROL_SELB_NORM   BIT(3)
  71 #define VC5_OUT_DIV_CONTROL_SEL_EXT     BIT(2)
  72 #define VC5_OUT_DIV_CONTROL_INT_MODE    BIT(1)
  73 #define VC5_OUT_DIV_CONTROL_EN_FOD      BIT(0)
  74
  75 #define VC5_OUT_DIV_FRAC(idx, n)        (0x22 + ((idx) * 0x10) + (n))
  76 #define VC5_OUT_DIV_FRAC4_OD_SCEE       BIT(1)
  77
  78 #define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n))
  79 #define VC5_OUT_DIV_SPREAD_MOD(idx, n)  (0x29 + ((idx) * 0x10) + (n))
  80 #define VC5_OUT_DIV_SKEW_INT(idx, n)    (0x2b + ((idx) * 0x10) + (n))
  81 #define VC5_OUT_DIV_INT(idx, n)         (0x2d + ((idx) * 0x10) + (n))
  82 #define VC5_OUT_DIV_SKEW_FRAC(idx)      (0x2f + ((idx) * 0x10))
  83 /* Registers 0x30, 0x40, 0x50 are factory reserved */
  84
  85 /* Clock control register for clock 1,2 */
  86 #define VC5_CLK_OUTPUT_CFG(idx, n)      (0x60 + ((idx) * 0x2) + (n))
  87 #define VC5_CLK_OUTPUT_CFG0_CFG_SHIFT   5
  88 #define VC5_CLK_OUTPUT_CFG0_CFG_MASK GENMASK(7, VC5_CLK_OUTPUT_CFG0_CFG_SHIFT)
  89
  90 #define VC5_CLK_OUTPUT_CFG0_CFG_LVPECL  (VC5_LVPECL)
  91 #define VC5_CLK_OUTPUT_CFG0_CFG_CMOS            (VC5_CMOS)
  92 #define VC5_CLK_OUTPUT_CFG0_CFG_HCSL33  (VC5_HCSL33)
  93 #define VC5_CLK_OUTPUT_CFG0_CFG_LVDS            (VC5_LVDS)
  94 #define VC5_CLK_OUTPUT_CFG0_CFG_CMOS2           (VC5_CMOS2)
  95 #define VC5_CLK_OUTPUT_CFG0_CFG_CMOSD           (VC5_CMOSD)
  96 #define VC5_CLK_OUTPUT_CFG0_CFG_HCSL25  (VC5_HCSL25)
  97
  98 #define VC5_CLK_OUTPUT_CFG0_PWR_SHIFT   3
  99 #define VC5_CLK_OUTPUT_CFG0_PWR_MASK GENMASK(4, VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
 100 #define VC5_CLK_OUTPUT_CFG0_PWR_18      (0 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
 101 #define VC5_CLK_OUTPUT_CFG0_PWR_25      (2 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
 102 #define VC5_CLK_OUTPUT_CFG0_PWR_33      (3 << VC5_CLK_OUTPUT_CFG0_PWR_SHIFT)
 103 #define VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT  0
 104 #define VC5_CLK_OUTPUT_CFG0_SLEW_MASK GENMASK(1, VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
 105 #define VC5_CLK_OUTPUT_CFG0_SLEW_80     (0 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
 106 #define VC5_CLK_OUTPUT_CFG0_SLEW_85     (1 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
 107 #define VC5_CLK_OUTPUT_CFG0_SLEW_90     (2 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
 108 #define VC5_CLK_OUTPUT_CFG0_SLEW_100    (3 << VC5_CLK_OUTPUT_CFG0_SLEW_SHIFT)
 109 #define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF   BIT(0)
 110
 111 #define VC5_CLK_OE_SHDN                         0x68
 112 #define VC5_CLK_OS_SHDN                         0x69
 113
 114 #define VC5_GLOBAL_REGISTER                     0x76
 115 #define VC5_GLOBAL_REGISTER_GLOBAL_RESET        BIT(5)
 116
 117 /* PLL/VCO runs between 2.5 GHz and 3.0 GHz */
 118 #define VC5_PLL_VCO_MIN                         2500000000UL
 119 #define VC5_PLL_VCO_MAX                         3000000000UL
 120
 121 /* VC5 Input mux settings */
 122 #define VC5_MUX_IN_XIN          BIT(0)
 123 #define VC5_MUX_IN_CLKIN        BIT(1)
 124
 125 /* Maximum number of clk_out supported by this driver */
 126 #define VC5_MAX_CLK_OUT_NUM     5
 127
 128 /* Maximum number of FODs supported by this driver */
 129 #define VC5_MAX_FOD_NUM 4
 130
 131 /* flags to describe chip features */
 132 /* chip has built-in oscilator */
 133 #define VC5_HAS_INTERNAL_XTAL   BIT(0)
 134 /* chip has PFD requency doubler */
 135 #define VC5_HAS_PFD_FREQ_DBL    BIT(1)
 136
 137 /* Supported IDT VC5 models. */
 138 enum vc5_model {
 139         IDT_VC5_5P49V5923,
 140         IDT_VC5_5P49V5925,
 141         IDT_VC5_5P49V5933,
 142         IDT_VC5_5P49V5935,
 143         IDT_VC6_5P49V6901,
 144         IDT_VC6_5P49V6965,
 145 };
 146
 147 /* Structure to describe features of a particular VC5 model */
 148 struct vc5_chip_info {
 149         const enum vc5_model    model;
 150         const unsigned int      clk_fod_cnt;
 151         const unsigned int      clk_out_cnt;
 152         const u32               flags;
 153 };
 154
 155 struct vc5_driver_data;
 156
 157 struct vc5_hw_data {
 158         struct clk              hw;
 159         struct vc5_driver_data  *vc5;
 160         u32                     div_int;
 161         u32                     div_frc;
 162         unsigned int            num;
 163 };
 164
 165 struct vc5_out_data {
 166         struct clk              hw;
 167         struct vc5_driver_data  *vc5;
 168         unsigned int            num;
 169         unsigned int            clk_output_cfg0;
 170         unsigned int            clk_output_cfg0_mask;
 171 };
 172
 173 struct vc5_driver_data {
 174         struct udevice          *i2c;
 175         const struct vc5_chip_info      *chip_info;
 176
 177         struct clk              *pin_xin;
 178         struct clk              *pin_clkin;
 179         unsigned char           clk_mux_ins;
 180         struct clk              clk_mux;
 181         struct clk              clk_mul;
 182         struct clk              clk_pfd;
 183         struct vc5_hw_data      clk_pll;
 184         struct vc5_hw_data      clk_fod[VC5_MAX_FOD_NUM];
 185         struct vc5_out_data     clk_out[VC5_MAX_CLK_OUT_NUM];
 186 };
 187
 188 static const struct vc5_chip_info idt_5p49v5923_info = {
 189         .model = IDT_VC5_5P49V5923,
 190         .clk_fod_cnt = 2,
 191         .clk_out_cnt = 3,
 192         .flags = 0,
 193 };
 194
 195 static const struct vc5_chip_info idt_5p49v5925_info = {
 196         .model = IDT_VC5_5P49V5925,
 197         .clk_fod_cnt = 4,
 198         .clk_out_cnt = 5,
 199         .flags = 0,
 200 };
 201
 202 static const struct vc5_chip_info idt_5p49v5933_info = {
 203         .model = IDT_VC5_5P49V5933,
 204         .clk_fod_cnt = 2,
 205         .clk_out_cnt = 3,
 206         .flags = VC5_HAS_INTERNAL_XTAL,
 207 };
 208
 209 static const struct vc5_chip_info idt_5p49v5935_info = {
 210         .model = IDT_VC5_5P49V5935,
 211         .clk_fod_cnt = 4,
 212         .clk_out_cnt = 5,
 213         .flags = VC5_HAS_INTERNAL_XTAL,
 214 };
 215
 216 static const struct vc5_chip_info idt_5p49v6901_info = {
 217         .model = IDT_VC6_5P49V6901,
 218         .clk_fod_cnt = 4,
 219         .clk_out_cnt = 5,
 220         .flags = VC5_HAS_PFD_FREQ_DBL,
 221 };
 222
 223 static const struct vc5_chip_info idt_5p49v6965_info = {
 224         .model = IDT_VC6_5P49V6965,
 225         .clk_fod_cnt = 4,
 226         .clk_out_cnt = 5,
 227         .flags = 0,
 228 };
 229
 230 static int vc5_update_bits(struct udevice *dev, unsigned int reg, unsigned int mask,
 231                            unsigned int src)
 232 {
 233         int ret;
 234         unsigned char cache;
 235
 236         ret = dm_i2c_read(dev, reg, &cache, 1);
 237         if (ret < 0)
 238                 return ret;
 239
 240         cache &= ~mask;
 241         cache |= mask & src;
 242         ret = dm_i2c_write(dev, reg, (uchar *)&cache, 1);
 243
 244         return ret;
 245 }
 246
 247 static unsigned long vc5_mux_get_rate(struct clk *hw)
 248 {
 249         return clk_get_rate(clk_get_parent(hw));
 250 }
 251
 252 static int vc5_mux_set_parent(struct clk *hw, unsigned char index)
 253 {
 254         struct vc5_driver_data *vc5 = container_of(hw, struct vc5_driver_data, clk_mux);
 255         const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
 256         u8 src;
 257
 258         if (index > 1 || !vc5->clk_mux_ins)
 259                 return -EINVAL;
 260
 261         if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) {
 262                 if (index == 0)
 263                         src = VC5_PRIM_SRC_SHDN_EN_XTAL;
 264                 if (index == 1)
 265                         src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
 266         } else {
 267                 if (index != 0)
 268                         return -EINVAL;
 269
 270                 if (vc5->clk_mux_ins == VC5_MUX_IN_XIN)
 271                         src = VC5_PRIM_SRC_SHDN_EN_XTAL;
 272                 else if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
 273                         src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
 274                 else /* Invalid; should have been caught by vc5_probe() */
 275                         return -EINVAL;
 276         }
 277
 278         return vc5_update_bits(vc5->i2c, VC5_PRIM_SRC_SHDN, mask, src);
 279 }
 280
 281 static const struct clk_ops vc5_mux_ops = {
 282         .get_rate       = vc5_mux_get_rate,
 283 };
 284
 285 static unsigned long vc5_pfd_round_rate(struct clk *hw, unsigned long rate)
 286 {
 287         struct clk *clk_parent = clk_get_parent(hw);
 288         unsigned long parent_rate = clk_get_rate(clk_parent);
 289         unsigned long idiv;
 290
 291         /* PLL cannot operate with input clock above 50 MHz. */
 292         if (rate > 50000000)
 293                 return -EINVAL;
 294
 295         /* CLKIN within range of PLL input, feed directly to PLL. */
 296         if (parent_rate <= 50000000)
 297                 return parent_rate;
 298
 299         idiv = DIV_ROUND_UP(parent_rate, rate);
 300         if (idiv > 127)
 301                 return -EINVAL;
 302
 303         return parent_rate / idiv;
 304 }
 305
 306 static unsigned long vc5_pfd_recalc_rate(struct clk *hw)
 307 {
 308         struct vc5_driver_data *vc5 =
 309                 container_of(hw, struct vc5_driver_data, clk_pfd);
 310         unsigned int prediv, div;
 311         struct clk *clk_parent = clk_get_parent(hw);
 312         unsigned long parent_rate = clk_get_rate(clk_parent);
 313
 314         dm_i2c_read(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV, (uchar *)&prediv, 1);
 315
 316         /* The bypass_prediv is set, PLL fed from Ref_in directly. */
 317         if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV)
 318                 return parent_rate;
 319
 320         dm_i2c_read(vc5->i2c, VC5_REF_DIVIDER, (uchar *)&div, 1);
 321
 322         /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */
 323         if (div & VC5_REF_DIVIDER_SEL_PREDIV2)
 324                 return parent_rate / 2;
 325         else
 326                 return parent_rate / VC5_REF_DIVIDER_REF_DIV(div);
 327 }
 328
 329 static unsigned long vc5_pfd_set_rate(struct clk *hw, unsigned long rate)
 330 {
 331         struct vc5_driver_data *vc5 =
 332                 container_of(hw, struct vc5_driver_data, clk_pfd);
 333         unsigned long idiv;
 334         u8 div;
 335         struct clk *clk_parent = clk_get_parent(hw);
 336         unsigned long parent_rate = clk_get_rate(clk_parent);
 337
 338         /* CLKIN within range of PLL input, feed directly to PLL. */
 339         if (parent_rate <= 50000000) {
 340                 vc5_update_bits(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV,
 341                                 VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV,
 342                                 VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
 343                 vc5_update_bits(vc5->i2c, VC5_REF_DIVIDER, 0xff, 0x00);
 344                 return 0;
 345         }
 346
 347         idiv = DIV_ROUND_UP(parent_rate, rate);
 348
 349         /* We have dedicated div-2 predivider. */
 350         if (idiv == 2)
 351                 div = VC5_REF_DIVIDER_SEL_PREDIV2;
 352         else
 353                 div = VC5_REF_DIVIDER_REF_DIV(idiv);
 354
 355         vc5_update_bits(vc5->i2c, VC5_REF_DIVIDER, 0xff, div);
 356         vc5_update_bits(vc5->i2c, VC5_VCO_CTRL_AND_PREDIV,
 357                         VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0);
 358
 359         return 0;
 360 }
 361
 362 static const struct clk_ops vc5_pfd_ops = {
 363         .round_rate     = vc5_pfd_round_rate,
 364         .get_rate       = vc5_pfd_recalc_rate,
 365         .set_rate       = vc5_pfd_set_rate,
 366 };
 367
 368 /*
 369  * VersaClock5 PLL/VCO
 370  */
 371 static unsigned long vc5_pll_recalc_rate(struct clk *hw)
 372 {
 373         struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 374         struct vc5_driver_data *vc = hwdata->vc5;
 375         struct clk *clk_parent = clk_get_parent(hw);
 376         unsigned long parent_rate = clk_get_rate(clk_parent);
 377         u32 div_int, div_frc;
 378         u8 fb[5];
 379
 380         dm_i2c_read(vc->i2c, VC5_FEEDBACK_INT_DIV, fb, 5);
 381
 382         div_int = (fb[0] << 4) | (fb[1] >> 4);
 383         div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4];
 384
 385         /* The PLL divider has 12 integer bits and 24 fractional bits */
 386         return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
 387 }
 388
 389 static unsigned long vc5_pll_round_rate(struct clk *hw, unsigned long rate)
 390 {
 391         struct clk *clk_parent = clk_get_parent(hw);
 392         unsigned long parent_rate = clk_get_rate(clk_parent);
 393         struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 394         u32 div_int;
 395         u64 div_frc;
 396
 397         if (rate < VC5_PLL_VCO_MIN)
 398                 rate = VC5_PLL_VCO_MIN;
 399         if (rate > VC5_PLL_VCO_MAX)
 400                 rate = VC5_PLL_VCO_MAX;
 401
 402         /* Determine integer part, which is 12 bit wide */
 403         div_int = rate / parent_rate;
 404         if (div_int > 0xfff)
 405                 rate = parent_rate * 0xfff;
 406
 407         /* Determine best fractional part, which is 24 bit wide */
 408         div_frc = rate % parent_rate;
 409         div_frc *= BIT(24) - 1;
 410         do_div(div_frc, parent_rate);
 411
 412         hwdata->div_int = div_int;
 413         hwdata->div_frc = (u32)div_frc;
 414
 415         return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
 416 }
 417
 418 static unsigned long vc5_pll_set_rate(struct clk *hw, unsigned long rate)
 419 {
 420         struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 421         struct vc5_driver_data *vc5 = hwdata->vc5;
 422         u8 fb[5];
 423
 424         fb[0] = hwdata->div_int >> 4;
 425         fb[1] = hwdata->div_int << 4;
 426         fb[2] = hwdata->div_frc >> 16;
 427         fb[3] = hwdata->div_frc >> 8;
 428         fb[4] = hwdata->div_frc;
 429
 430         return dm_i2c_write(vc5->i2c, VC5_FEEDBACK_INT_DIV, fb, 5);
 431 }
 432
 433 static const struct clk_ops vc5_pll_ops = {
 434         .round_rate     = vc5_pll_round_rate,
 435         .get_rate       = vc5_pll_recalc_rate,
 436         .set_rate       = vc5_pll_set_rate,
 437 };
 438
 439 static unsigned long vc5_fod_recalc_rate(struct clk *hw)
 440 {
 441         struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 442         struct vc5_driver_data *vc = hwdata->vc5;
 443         struct clk *parent = &vc->clk_pll.hw;
 444         unsigned long parent_rate =  vc5_pll_recalc_rate(parent);
 445
 446         /* VCO frequency is divided by two before entering FOD */
 447         u32 f_in = parent_rate / 2;
 448         u32 div_int, div_frc;
 449         u8 od_int[2];
 450         u8 od_frc[4];
 451
 452         dm_i2c_read(vc->i2c, VC5_OUT_DIV_INT(hwdata->num, 0), od_int, 2);
 453         dm_i2c_read(vc->i2c, VC5_OUT_DIV_FRAC(hwdata->num, 0), od_frc, 4);
 454
 455         div_int = (od_int[0] << 4) | (od_int[1] >> 4);
 456         div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
 457                   (od_frc[2] << 6) | (od_frc[3] >> 2);
 458
 459         /* Avoid division by zero if the output is not configured. */
 460         if (div_int == 0 && div_frc == 0)
 461                 return 0;
 462
 463         /* The PLL divider has 12 integer bits and 30 fractional bits */
 464         return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
 465 }
 466
 467 static unsigned long vc5_fod_round_rate(struct clk *hw, unsigned long rate)
 468 {
 469         struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 470         struct vc5_driver_data *vc = hwdata->vc5;
 471         struct clk *parent = &vc->clk_pll.hw;
 472         unsigned long parent_rate =  vc5_pll_recalc_rate(parent);
 473
 474         /* VCO frequency is divided by two before entering FOD */
 475         u32 f_in = parent_rate / 2;
 476         u32 div_int;
 477         u64 div_frc;
 478
 479         /* Determine integer part, which is 12 bit wide */
 480         div_int = f_in / rate;
 481
 482         /*
 483          * WARNING: The clock chip does not output signal if the integer part
 484          *          of the divider is 0xfff and fractional part is non-zero.
 485          *          Clamp the divider at 0xffe to keep the code simple.
 486          */
 487         if (div_int > 0xffe) {
 488                 div_int = 0xffe;
 489                 rate = f_in / div_int;
 490         }
 491
 492         /* Determine best fractional part, which is 30 bit wide */
 493         div_frc = f_in % rate;
 494         div_frc <<= 24;
 495         do_div(div_frc, rate);
 496
 497         hwdata->div_int = div_int;
 498         hwdata->div_frc = (u32)div_frc;
 499
 500         return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
 501 }
 502
 503 static unsigned long vc5_fod_set_rate(struct clk *hw, unsigned long rate)
 504 {
 505         struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
 506         struct vc5_driver_data *vc5 = hwdata->vc5;
 507
 508         u8 data[14] = {
 509                 hwdata->div_frc >> 22, hwdata->div_frc >> 14,
 510                 hwdata->div_frc >> 6, hwdata->div_frc << 2,
 511                 0, 0, 0, 0, 0,
 512                 0, 0,
 513                 hwdata->div_int >> 4, hwdata->div_int << 4,
 514                 0
 515         };
 516
 517         dm_i2c_write(vc5->i2c, VC5_OUT_DIV_FRAC(hwdata->num, 0), data, 14);
 518
 519         /*
 520          * Toggle magic bit in undocumented register for unknown reason.
 521          * This is what the IDT timing commander tool does and the chip
 522          * datasheet somewhat implies this is needed, but the register
 523          * and the bit is not documented.
 524          */
 525         vc5_update_bits(vc5->i2c, VC5_GLOBAL_REGISTER,
 526                         VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0);
 527         vc5_update_bits(vc5->i2c, VC5_GLOBAL_REGISTER,
 528                         VC5_GLOBAL_REGISTER_GLOBAL_RESET,
 529                         VC5_GLOBAL_REGISTER_GLOBAL_RESET);
 530
 531         return 0;
 532 }
 533
 534 static const struct clk_ops vc5_fod_ops = {
 535         .round_rate     = vc5_fod_round_rate,
 536         .get_rate       = vc5_fod_recalc_rate,
 537         .set_rate       = vc5_fod_set_rate,
 538 };
 539
 540 static int vc5_clk_out_prepare(struct clk *hw)
 541 {
 542         struct udevice *dev;
 543         struct vc5_driver_data *vc5;
 544         struct vc5_out_data *hwdata;
 545
 546         const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
 547                         VC5_OUT_DIV_CONTROL_SEL_EXT |
 548                         VC5_OUT_DIV_CONTROL_EN_FOD;
 549         unsigned int src;
 550         int ret;
 551
 552         uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev);
 553         vc5 = dev_get_priv(dev);
 554         hwdata = &vc5->clk_out[hw->id];
 555
 556         /*
 557          * If the input mux is disabled, enable it first and
 558          * select source from matching FOD.
 559          */
 560
 561         dm_i2c_read(vc5->i2c, VC5_OUT_DIV_CONTROL(hwdata->num), (uchar *)&src, 1);
 562
 563         if ((src & mask) == 0) {
 564                 src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD;
 565                 ret = vc5_update_bits(vc5->i2c,
 566                                       VC5_OUT_DIV_CONTROL(hwdata->num),
 567                                       mask | VC5_OUT_DIV_CONTROL_RESET, src);
 568                 if (ret)
 569                         return ret;
 570         }
 571
 572         /* Enable the clock buffer */
 573         vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
 574                         VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
 575                         VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
 576         if (hwdata->clk_output_cfg0_mask) {
 577                 vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
 578                                 hwdata->clk_output_cfg0_mask,
 579                                 hwdata->clk_output_cfg0);
 580         }
 581
 582         return 0;
 583 }
 584
 585 static int vc5_clk_out_unprepare(struct clk *hw)
 586 {
 587         struct udevice *dev;
 588         struct vc5_driver_data *vc5;
 589         struct vc5_out_data *hwdata;
 590         int ret;
 591
 592         uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev);
 593         vc5 = dev_get_priv(dev);
 594         hwdata = &vc5->clk_out[hw->id];
 595
 596         /* Disable the clock buffer */
 597         ret = vc5_update_bits(vc5->i2c, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
 598                               VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0);
 599
 600         return ret;
 601 }
 602
 603 static int vc5_clk_out_set_parent(struct vc5_driver_data *vc, u8 num, u8 index)
 604 {
 605         const u8 mask = VC5_OUT_DIV_CONTROL_RESET |
 606                         VC5_OUT_DIV_CONTROL_SELB_NORM |
 607                         VC5_OUT_DIV_CONTROL_SEL_EXT |
 608                         VC5_OUT_DIV_CONTROL_EN_FOD;
 609         const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
 610                           VC5_OUT_DIV_CONTROL_SEL_EXT;
 611         u8 src = VC5_OUT_DIV_CONTROL_RESET;
 612
 613         if (index == 0)
 614                 src |= VC5_OUT_DIV_CONTROL_EN_FOD;
 615         else
 616                 src |= extclk;
 617
 618         return vc5_update_bits(vc->i2c, VC5_OUT_DIV_CONTROL(num), mask, src);
 619 }
 620
 621 static unsigned long vc5_clk_out_set_rate(struct clk *hw, unsigned long rate)
 622 {
 623         struct udevice *dev;
 624         struct vc5_driver_data *vc;
 625         struct clk *parent;
 626
 627         uclass_get_device_by_name(UCLASS_CLK, clk_hw_get_name(hw), &dev);
 628         vc = dev_get_priv(dev);
 629         parent = clk_get_parent(&vc->clk_out[hw->id].hw);
 630
 631         /* setting the output rate really means setting the parent FOD rate */
 632         return clk_set_rate(parent, clk_round_rate(parent, rate));
 633 }
 634
 635 static unsigned long vc5_clk_out_get_rate(struct clk *hw)
 636 {
 637         return clk_get_parent_rate(hw);
 638 }
 639
 640 static const struct clk_ops vc5_clk_out_ops = {
 641         .enable = vc5_clk_out_prepare,
 642         .disable        = vc5_clk_out_unprepare,
 643         .set_rate       = vc5_clk_out_set_rate,
 644         .get_rate       = vc5_clk_out_get_rate,
 645 };
 646
 647 static const struct clk_ops vc5_clk_out_sel_ops = {
 648         .enable = vc5_clk_out_prepare,
 649         .disable        = vc5_clk_out_unprepare,
 650         .get_rate       = vc5_clk_out_get_rate,
 651 };
 652
 653 static const struct clk_ops vc5_clk_ops = {
 654         .enable = vc5_clk_out_prepare,
 655         .disable        = vc5_clk_out_unprepare,
 656         .set_rate       = vc5_clk_out_set_rate,
 657         .get_rate       = vc5_clk_out_get_rate,
 658 };
 659
 660 static int vc5_map_index_to_output(const enum vc5_model model,
 661                                    const unsigned int n)
 662 {
 663         switch (model) {
 664         case IDT_VC5_5P49V5933:
 665                 return (n == 0) ? 0 : 3;
 666         case IDT_VC5_5P49V5923:
 667         case IDT_VC5_5P49V5925:
 668         case IDT_VC5_5P49V5935:
 669         case IDT_VC6_5P49V6901:
 670         case IDT_VC6_5P49V6965:
 671         default:
 672                 return n;
 673         }
 674 }
 675
 676 static int vc5_update_mode(ofnode np_output,
 677                            struct vc5_out_data *clk_out)
 678 {
 679         u32 value;
 680
 681         if (!ofnode_read_u32(np_output, "idt,mode", &value)) {
 682                 clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_CFG_MASK;
 683                 switch (value) {
 684                 case VC5_CLK_OUTPUT_CFG0_CFG_LVPECL:
 685                 case VC5_CLK_OUTPUT_CFG0_CFG_CMOS:
 686                 case VC5_CLK_OUTPUT_CFG0_CFG_HCSL33:
 687                 case VC5_CLK_OUTPUT_CFG0_CFG_LVDS:
 688                 case VC5_CLK_OUTPUT_CFG0_CFG_CMOS2:
 689                 case VC5_CLK_OUTPUT_CFG0_CFG_CMOSD:
 690                 case VC5_CLK_OUTPUT_CFG0_CFG_HCSL25:
 691                         clk_out->clk_output_cfg0 |=
 692                             value << VC5_CLK_OUTPUT_CFG0_CFG_SHIFT;
 693                         break;
 694                 default:
 695                         return -EINVAL;
 696                 }
 697         }
 698
 699         return 0;
 700 }
 701
 702 static int vc5_update_power(ofnode np_output, struct vc5_out_data *clk_out)
 703 {
 704         u32 value;
 705
 706         if (!ofnode_read_u32(np_output, "idt,voltage-microvolt", &value)) {
 707                 clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_PWR_MASK;
 708                 switch (value) {
 709                 case 1800000:
 710                         clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_18;
 711                         break;
 712                 case 2500000:
 713                         clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_25;
 714                         break;
 715                 case 3300000:
 716                         clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_PWR_33;
 717                         break;
 718                 default:
 719                         return -EINVAL;
 720                 }
 721         }
 722         return 0;
 723 }
 724
 725 static int vc5_map_cap_value(u32 femtofarads)
 726 {
 727         int mapped_value;
 728
 729         /*
 730          * The datasheet explicitly states 9000 - 25000 with 0.5pF
 731          * steps, but the Programmer's guide shows the steps are 0.430pF.
 732          * After getting feedback from Renesas, the .5pF steps were the
 733          * goal, but 430nF was the actual values.
 734          * Because of this, the actual range goes to 22760 instead of 25000
 735          */
 736         if (femtofarads < 9000 || femtofarads > 22760)
 737                 return -EINVAL;
 738
 739         /*
 740          * The Programmer's guide shows XTAL[5:0] but in reality,
 741          * XTAL[0] and XTAL[1] are both LSB which makes the math
 742          * strange.  With clarfication from Renesas, setting the
 743          * values should be simpler by ignoring XTAL[0]
 744          */
 745         mapped_value = DIV_ROUND_CLOSEST(femtofarads - 9000, 430);
 746
 747         /*
 748          * Since the calculation ignores XTAL[0], there is one
 749          * special case where mapped_value = 32.  In reality, this means
 750          * the real mapped value should be 111111b.  In other cases,
 751          * the mapped_value needs to be shifted 1 to the left.
 752          */
 753         if (mapped_value > 31)
 754                 mapped_value = 0x3f;
 755         else
 756                 mapped_value <<= 1;
 757
 758         return mapped_value;
 759 }
 760
 761 static int vc5_update_cap_load(ofnode node, struct vc5_driver_data *vc5)
 762 {
 763         u32 value;
 764         int mapped_value;
 765
 766         if (!ofnode_read_u32(node, "idt,xtal-load-femtofarads", &value)) {
 767                 mapped_value = vc5_map_cap_value(value);
 768
 769                 if (mapped_value < 0)
 770                         return mapped_value;
 771
 772                 /*
 773                  * The mapped_value is really the high 6 bits of
 774                  * VC5_XTAL_X1_LOAD_CAP and VC5_XTAL_X2_LOAD_CAP, so
 775                  * shift the value 2 places.
 776                  */
 777                 vc5_update_bits(vc5->i2c, VC5_XTAL_X1_LOAD_CAP, ~0x03, mapped_value << 2);
 778                 vc5_update_bits(vc5->i2c, VC5_XTAL_X2_LOAD_CAP, ~0x03, mapped_value << 2);
 779         }
 780
 781         return 0;
 782 }
 783
 784 static int vc5_update_slew(ofnode np_output, struct vc5_out_data *clk_out)
 785 {
 786         u32 value;
 787
 788         if (!ofnode_read_u32(np_output, "idt,slew-percent", &value)) {
 789                 clk_out->clk_output_cfg0_mask |= VC5_CLK_OUTPUT_CFG0_SLEW_MASK;
 790
 791                 switch (value) {
 792                 case 80:
 793                         clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_80;
 794                         break;
 795                 case 85:
 796                         clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_85;
 797                         break;
 798                 case 90:
 799                         clk_out->clk_output_cfg0 |= VC5_CLK_OUTPUT_CFG0_SLEW_90;
 800                         break;
 801                 case 100:
 802                         clk_out->clk_output_cfg0 |=
 803                             VC5_CLK_OUTPUT_CFG0_SLEW_100;
 804                         break;
 805                 default:
 806                         return -EINVAL;
 807                 }
 808         }
 809         return 0;
 810 }
 811
 812 static int vc5_get_output_config(struct udevice *dev,
 813                                  struct vc5_out_data *clk_out)
 814 {
 815         ofnode np_output;
 816         char child_name[5];
 817         int ret = 0;
 818
 819         sprintf(child_name, "OUT%d", clk_out->num + 1);
 820
 821         np_output = dev_read_subnode(dev, child_name);
 822
 823         if (!ofnode_valid(np_output)) {
 824                 dev_dbg(dev, "Invalid clock output configuration OUT%d\n",
 825                         clk_out->num + 1);
 826                 return 0;
 827         }
 828
 829         ret = vc5_update_mode(np_output, clk_out);
 830         if (ret)
 831                 return ret;
 832
 833         ret = vc5_update_power(np_output, clk_out);
 834         if (ret)
 835                 return ret;
 836
 837         ret = vc5_update_slew(np_output, clk_out);
 838
 839         return ret;
 840 }
 841
 842 static char *versaclock_get_name(const char *dev_name, const char *clk_name, int index)
 843 {
 844         int length;
 845         char *buf;
 846
 847         if (index < 0)
 848                 length = snprintf(NULL, 0, "%s.%s", dev_name, clk_name) + 1;
 849         else
 850                 length = snprintf(NULL, 0, "%s.%s%d", dev_name, clk_name, index) + 1;
 851
 852         buf = malloc(length);
 853         if (!buf)
 854                 ERR_PTR(-ENOMEM);
 855
 856         if (index < 0)
 857                 snprintf(buf, length, "%s.%s", dev_name, clk_name);
 858         else
 859                 snprintf(buf, length, "%s.%s%d", dev_name, clk_name, index);
 860
 861         return buf;
 862 }
 863
 864 int versaclock_probe(struct udevice *dev)
 865 {
 866         struct vc5_driver_data *vc5 = dev_get_priv(dev);
 867         struct vc5_chip_info *chip = (void *)dev_get_driver_data(dev);
 868         unsigned int n, idx = 0;
 869         char *mux_name, *pfd_name, *pll_name, *outsel_name;
 870         char *out_name[VC5_MAX_CLK_OUT_NUM];
 871         char *fod_name[VC5_MAX_FOD_NUM];
 872         int ret;
 873         u64 val;
 874
 875         val = (u64)dev_read_addr_ptr(dev);
 876         ret = i2c_get_chip(dev->parent, val, 1, &vc5->i2c);
 877
 878         if (ret) {
 879                 dev_dbg(dev, "I2C probe failed.\n");
 880                 return ret;
 881         }
 882
 883         vc5->chip_info = chip;
 884         vc5->pin_xin = devm_clk_get(dev, "xin");
 885
 886         if (IS_ERR(vc5->pin_xin))
 887                 dev_dbg(dev, "failed to get xin clock\n");
 888
 889         ret = clk_enable(vc5->pin_xin);
 890         if (ret)
 891                 dev_dbg(dev, "failed to enable XIN clock\n");
 892
 893         vc5->pin_clkin = devm_clk_get(dev, "clkin");
 894
 895         /* Register clock input mux */
 896         if (!IS_ERR(vc5->pin_xin)) {
 897                 vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
 898         } else if (vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL) {
 899                 if (IS_ERR(vc5->pin_xin))
 900                         return PTR_ERR(vc5->pin_xin);
 901                 vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
 902         }
 903
 904         mux_name = versaclock_get_name(dev->name, "mux", -1);
 905         if (IS_ERR(mux_name))
 906                 return PTR_ERR(mux_name);
 907
 908         clk_register(&vc5->clk_mux, "versaclock-mux", mux_name, vc5->pin_xin->dev->name);
 909
 910         if (!IS_ERR(vc5->pin_xin))
 911                 vc5_mux_set_parent(&vc5->clk_mux, 1);
 912         else
 913                 vc5_mux_set_parent(&vc5->clk_mux, 0);
 914
 915         /* Configure Optional Loading Capacitance for external XTAL */
 916         if (!(vc5->chip_info->flags & VC5_HAS_INTERNAL_XTAL)) {
 917                 ret = vc5_update_cap_load(dev_ofnode(dev), vc5);
 918                 if (ret)
 919                         dev_dbg(dev, "failed to vc5_update_cap_load\n");
 920         }
 921
 922         /* Register PFD */
 923         pfd_name = versaclock_get_name(dev->name, "pfd", -1);
 924         if (IS_ERR(pfd_name)) {
 925                 ret = PTR_ERR(pfd_name);
 926                 goto free_mux;
 927         }
 928
 929         ret = clk_register(&vc5->clk_pfd, "versaclock-pfd", pfd_name, vc5->clk_mux.dev->name);
 930         if (ret)
 931                 goto free_pfd;
 932
 933         /* Register PLL */
 934         vc5->clk_pll.num = 0;
 935         vc5->clk_pll.vc5 = vc5;
 936         pll_name = versaclock_get_name(dev->name, "pll", -1);
 937         if (IS_ERR(pll_name)) {
 938                 ret = PTR_ERR(pll_name);
 939                 goto free_pfd;
 940         }
 941
 942         ret = clk_register(&vc5->clk_pll.hw, "versaclock-pll", pll_name, vc5->clk_pfd.dev->name);
 943         if (ret)
 944                 goto free_pll;
 945
 946         /* Register FODs */
 947         for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
 948                 fod_name[n] = versaclock_get_name(dev->name, "fod", n);
 949                 if (IS_ERR(pll_name)) {
 950                         ret = PTR_ERR(fod_name[n]);
 951                         goto free_fod;
 952                 }
 953                 idx = vc5_map_index_to_output(vc5->chip_info->model, n);
 954                 vc5->clk_fod[n].num = idx;
 955                 vc5->clk_fod[n].vc5 = vc5;
 956                 ret = clk_register(&vc5->clk_fod[n].hw, "versaclock-fod", fod_name[n],
 957                                    vc5->clk_pll.hw.dev->name);
 958                 if (ret)
 959                         goto free_fod;
 960         }
 961
 962         /* Register MUX-connected OUT0_I2C_SELB output */
 963         vc5->clk_out[0].num = idx;
 964         vc5->clk_out[0].vc5 = vc5;
 965         outsel_name = versaclock_get_name(dev->name, "out0_sel_i2cb", -1);
 966         if (IS_ERR(outsel_name)) {
 967                 ret = PTR_ERR(outsel_name);
 968                 goto free_fod;
 969         };
 970
 971         ret = clk_register(&vc5->clk_out[0].hw, "versaclock-outsel",  outsel_name,
 972                            vc5->clk_mux.dev->name);
 973         if (ret)
 974                 goto free_selb;
 975
 976         /* Register FOD-connected OUTx outputs */
 977         for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
 978                 idx = vc5_map_index_to_output(vc5->chip_info->model, n - 1);
 979                 out_name[n] = versaclock_get_name(dev->name, "out", n);
 980                 if (IS_ERR(out_name[n])) {
 981                         ret = PTR_ERR(out_name[n]);
 982                         goto free_selb;
 983                 }
 984                 vc5->clk_out[n].num = idx;
 985                 vc5->clk_out[n].vc5 = vc5;
 986                 ret = clk_register(&vc5->clk_out[n].hw, "versaclock-out", out_name[n],
 987                                    vc5->clk_fod[idx].hw.dev->name);
 988                 if (ret)
 989                         goto free_out;
 990                 vc5_clk_out_set_parent(vc5, idx, 0);
 991
 992                 /* Fetch Clock Output configuration from DT (if specified) */
 993                 ret = vc5_get_output_config(dev, &vc5->clk_out[n]);
 994                 if (ret) {
 995                         dev_dbg(dev, "failed to vc5_get_output_config()\n");
 996                         goto free_out;
 997                 }
 998         }
 999
1000         return 0;
1001
1002 free_out:
1003         for (n = 1; n < vc5->chip_info->clk_out_cnt; n++) {
1004                 clk_free(&vc5->clk_out[n].hw);
1005                 free(out_name[n]);
1006         }
1007 free_selb:
1008         clk_free(&vc5->clk_out[0].hw);
1009         free(outsel_name);
1010 free_fod:
1011         for (n = 0; n < vc5->chip_info->clk_fod_cnt; n++) {
1012                 clk_free(&vc5->clk_fod[n].hw);
1013                 free(fod_name[n]);
1014         }
1015 free_pll:
1016         clk_free(&vc5->clk_pll.hw);
1017         free(pll_name);
1018 free_pfd:
1019         clk_free(&vc5->clk_pfd);
1020         free(pfd_name);
1021 free_mux:
1022         clk_free(&vc5->clk_mux);
1023         free(mux_name);
1024
1025         return ret;
1026 }
1027
1028 static const struct udevice_id versaclock_ids[] = {
1029         { .compatible = "idt,5p49v5923", .data = (ulong)&idt_5p49v5923_info },
1030         { .compatible = "idt,5p49v5925", .data = (ulong)&idt_5p49v5925_info },
1031         { .compatible = "idt,5p49v5933", .data = (ulong)&idt_5p49v5933_info },
1032         { .compatible = "idt,5p49v5935", .data = (ulong)&idt_5p49v5935_info },
1033         { .compatible = "idt,5p49v6901", .data = (ulong)&idt_5p49v6901_info },
1034         { .compatible = "idt,5p49v6965", .data = (ulong)&idt_5p49v6965_info },
1035         {},
1036 };
1037
1038 U_BOOT_DRIVER(versaclock) = {
1039         .name           = "versaclock",
1040         .id             = UCLASS_CLK,
1041         .ops            = &vc5_clk_ops,
1042         .of_match       = versaclock_ids,
1043         .probe          = versaclock_probe,
1044         .priv_auto      = sizeof(struct vc5_driver_data),
1045 };
1046
1047 U_BOOT_DRIVER(versaclock_mux) = {
1048         .name           = "versaclock-mux",
1049         .id             = UCLASS_CLK,
1050         .ops            = &vc5_mux_ops,
1051 };
1052
1053 U_BOOT_DRIVER(versaclock_pfd) = {
1054         .name           = "versaclock-pfd",
1055         .id             = UCLASS_CLK,
1056         .ops            = &vc5_pfd_ops,
1057 };
1058
1059 U_BOOT_DRIVER(versaclock_pll) = {
1060         .name           = "versaclock-pll",
1061         .id             = UCLASS_CLK,
1062         .ops            = &vc5_pll_ops,
1063 };
1064
1065 U_BOOT_DRIVER(versaclock_fod) = {
1066         .name           = "versaclock-fod",
1067         .id             = UCLASS_CLK,
1068         .ops            = &vc5_fod_ops,
1069 };
1070
1071 U_BOOT_DRIVER(versaclock_out) = {
1072         .name           = "versaclock-out",
1073         .id             = UCLASS_CLK,
1074         .ops            = &vc5_clk_out_ops,
1075 };
1076
1077 U_BOOT_DRIVER(versaclock_outsel) = {
1078         .name           = "versaclock-outsel",
1079         .id             = UCLASS_CLK,
1080         .ops            = &vc5_clk_out_sel_ops,
1081 };