drivers/char/vme_scc.c

   1 /*
   2  * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
   3  * implementation.
   4  * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
   5  *
   6  * Based on atari_SCC.c which was
   7  *   Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
   8  *   Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
   9  *
  10  * This file is subject to the terms and conditions of the GNU General Public
  11  * License.  See the file COPYING in the main directory of this archive
  12  * for more details.
  13  *
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/kdev_t.h>
  18 #include <asm/io.h>
  19 #include <linux/kernel.h>
  20 #include <linux/ioport.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/errno.h>
  23 #include <linux/tty.h>
  24 #include <linux/tty_flip.h>
  25 #include <linux/mm.h>
  26 #include <linux/serial.h>
  27 #include <linux/fcntl.h>
  28 #include <linux/major.h>
  29 #include <linux/delay.h>
  30 #include <linux/slab.h>
  31 #include <linux/miscdevice.h>
  32 #include <linux/console.h>
  33 #include <linux/init.h>
  34 #include <asm/setup.h>
  35 #include <asm/bootinfo.h>
  36
  37 #ifdef CONFIG_MVME147_SCC
  38 #include <asm/mvme147hw.h>
  39 #endif
  40 #ifdef CONFIG_MVME162_SCC
  41 #include <asm/mvme16xhw.h>
  42 #endif
  43 #ifdef CONFIG_BVME6000_SCC
  44 #include <asm/bvme6000hw.h>
  45 #endif
  46
  47 #include <linux/generic_serial.h>
  48 #include "scc.h"
  49
  50
  51 #define CHANNEL_A       0
  52 #define CHANNEL_B       1
  53
  54 #define SCC_MINOR_BASE  64
  55
  56 /* Shadows for all SCC write registers */
  57 static unsigned char scc_shadow[2][16];
  58
  59 /* Location to access for SCC register access delay */
  60 static volatile unsigned char *scc_del = NULL;
  61
  62 /* To keep track of STATUS_REG state for detection of Ext/Status int source */
  63 static unsigned char scc_last_status_reg[2];
  64
  65 /***************************** Prototypes *****************************/
  66
  67 /* Function prototypes */
  68 static void scc_disable_tx_interrupts(void * ptr);
  69 static void scc_enable_tx_interrupts(void * ptr);
  70 static void scc_disable_rx_interrupts(void * ptr);
  71 static void scc_enable_rx_interrupts(void * ptr);
  72 static int  scc_carrier_raised(struct tty_port *port);
  73 static void scc_shutdown_port(void * ptr);
  74 static int scc_set_real_termios(void  *ptr);
  75 static void scc_hungup(void  *ptr);
  76 static void scc_close(void  *ptr);
  77 static int scc_chars_in_buffer(void * ptr);
  78 static int scc_open(struct tty_struct * tty, struct file * filp);
  79 static int scc_ioctl(struct tty_struct * tty, struct file * filp,
  80                      unsigned int cmd, unsigned long arg);
  81 static void scc_throttle(struct tty_struct *tty);
  82 static void scc_unthrottle(struct tty_struct *tty);
  83 static irqreturn_t scc_tx_int(int irq, void *data);
  84 static irqreturn_t scc_rx_int(int irq, void *data);
  85 static irqreturn_t scc_stat_int(int irq, void *data);
  86 static irqreturn_t scc_spcond_int(int irq, void *data);
  87 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
  88 static int scc_break_ctl(struct tty_struct *tty, int break_state);
  89
  90 static struct tty_driver *scc_driver;
  91
  92 static struct scc_port scc_ports[2];
  93
  94 /*---------------------------------------------------------------------------
  95  * Interface from generic_serial.c back here
  96  *--------------------------------------------------------------------------*/
  97
  98 static struct real_driver scc_real_driver = {
  99         scc_disable_tx_interrupts,
 100         scc_enable_tx_interrupts,
 101         scc_disable_rx_interrupts,
 102         scc_enable_rx_interrupts,
 103         scc_shutdown_port,
 104         scc_set_real_termios,
 105         scc_chars_in_buffer,
 106         scc_close,
 107         scc_hungup,
 108         NULL
 109 };
 110
 111
 112 static const struct tty_operations scc_ops = {
 113         .open   = scc_open,
 114         .close = gs_close,
 115         .write = gs_write,
 116         .put_char = gs_put_char,
 117         .flush_chars = gs_flush_chars,
 118         .write_room = gs_write_room,
 119         .chars_in_buffer = gs_chars_in_buffer,
 120         .flush_buffer = gs_flush_buffer,
 121         .ioctl = scc_ioctl,
 122         .throttle = scc_throttle,
 123         .unthrottle = scc_unthrottle,
 124         .set_termios = gs_set_termios,
 125         .stop = gs_stop,
 126         .start = gs_start,
 127         .hangup = gs_hangup,
 128         .break_ctl = scc_break_ctl,
 129 };
 130
 131 static const struct tty_port_operations scc_port_ops = {
 132         .carrier_raised = scc_carrier_raised,
 133 };
 134
 135 /*----------------------------------------------------------------------------
 136  * vme_scc_init() and support functions
 137  *---------------------------------------------------------------------------*/
 138
 139 static int scc_init_drivers(void)
 140 {
 141         int error;
 142
 143         scc_driver = alloc_tty_driver(2);
 144         if (!scc_driver)
 145                 return -ENOMEM;
 146         scc_driver->owner = THIS_MODULE;
 147         scc_driver->driver_name = "scc";
 148         scc_driver->name = "ttyS";
 149         scc_driver->major = TTY_MAJOR;
 150         scc_driver->minor_start = SCC_MINOR_BASE;
 151         scc_driver->type = TTY_DRIVER_TYPE_SERIAL;
 152         scc_driver->subtype = SERIAL_TYPE_NORMAL;
 153         scc_driver->init_termios = tty_std_termios;
 154         scc_driver->init_termios.c_cflag =
 155           B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 156         scc_driver->init_termios.c_ispeed = 9600;
 157         scc_driver->init_termios.c_ospeed = 9600;
 158         scc_driver->flags = TTY_DRIVER_REAL_RAW;
 159         tty_set_operations(scc_driver, &scc_ops);
 160
 161         if ((error = tty_register_driver(scc_driver))) {
 162                 printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
 163                        error);
 164                 put_tty_driver(scc_driver);
 165                 return 1;
 166         }
 167
 168         return 0;
 169 }
 170
 171
 172 /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
 173  */
 174
 175 static void scc_init_portstructs(void)
 176 {
 177         struct scc_port *port;
 178         int i;
 179
 180         for (i = 0; i < 2; i++) {
 181                 port = scc_ports + i;
 182                 tty_port_init(&port->gs.port);
 183                 port->gs.port.ops = &scc_port_ops;
 184                 port->gs.magic = SCC_MAGIC;
 185                 port->gs.close_delay = HZ/2;
 186                 port->gs.closing_wait = 30 * HZ;
 187                 port->gs.rd = &scc_real_driver;
 188 #ifdef NEW_WRITE_LOCKING
 189                 port->gs.port_write_mutex = MUTEX;
 190 #endif
 191                 init_waitqueue_head(&port->gs.port.open_wait);
 192                 init_waitqueue_head(&port->gs.port.close_wait);
 193         }
 194 }
 195
 196
 197 #ifdef CONFIG_MVME147_SCC
 198 static int mvme147_scc_init(void)
 199 {
 200         struct scc_port *port;
 201
 202         printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
 203         /* Init channel A */
 204         port = &scc_ports[0];
 205         port->channel = CHANNEL_A;
 206         port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
 207         port->datap = port->ctrlp + 1;
 208         port->port_a = &scc_ports[0];
 209         port->port_b = &scc_ports[1];
 210         request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 211                             "SCC-A TX", port);
 212         request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 213                             "SCC-A status", port);
 214         request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 215                             "SCC-A RX", port);
 216         request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
 217                             "SCC-A special cond", port);
 218         {
 219                 SCC_ACCESS_INIT(port);
 220
 221                 /* disable interrupts for this channel */
 222                 SCCwrite(INT_AND_DMA_REG, 0);
 223                 /* Set the interrupt vector */
 224                 SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
 225                 /* Interrupt parameters: vector includes status, status low */
 226                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 227                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 228         }
 229
 230         /* Init channel B */
 231         port = &scc_ports[1];
 232         port->channel = CHANNEL_B;
 233         port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
 234         port->datap = port->ctrlp + 1;
 235         port->port_a = &scc_ports[0];
 236         port->port_b = &scc_ports[1];
 237         request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 238                             "SCC-B TX", port);
 239         request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 240                             "SCC-B status", port);
 241         request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 242                             "SCC-B RX", port);
 243         request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
 244                             "SCC-B special cond", port);
 245         {
 246                 SCC_ACCESS_INIT(port);
 247
 248                 /* disable interrupts for this channel */
 249                 SCCwrite(INT_AND_DMA_REG, 0);
 250         }
 251
 252         /* Ensure interrupts are enabled in the PCC chip */
 253         m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
 254
 255         /* Initialise the tty driver structures and register */
 256         scc_init_portstructs();
 257         scc_init_drivers();
 258
 259         return 0;
 260 }
 261 #endif
 262
 263
 264 #ifdef CONFIG_MVME162_SCC
 265 static int mvme162_scc_init(void)
 266 {
 267         struct scc_port *port;
 268
 269         if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
 270                 return (-ENODEV);
 271
 272         printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
 273         /* Init channel A */
 274         port = &scc_ports[0];
 275         port->channel = CHANNEL_A;
 276         port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
 277         port->datap = port->ctrlp + 2;
 278         port->port_a = &scc_ports[0];
 279         port->port_b = &scc_ports[1];
 280         request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 281                             "SCC-A TX", port);
 282         request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 283                             "SCC-A status", port);
 284         request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 285                             "SCC-A RX", port);
 286         request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
 287                             "SCC-A special cond", port);
 288         {
 289                 SCC_ACCESS_INIT(port);
 290
 291                 /* disable interrupts for this channel */
 292                 SCCwrite(INT_AND_DMA_REG, 0);
 293                 /* Set the interrupt vector */
 294                 SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
 295                 /* Interrupt parameters: vector includes status, status low */
 296                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 297                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 298         }
 299
 300         /* Init channel B */
 301         port = &scc_ports[1];
 302         port->channel = CHANNEL_B;
 303         port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
 304         port->datap = port->ctrlp + 2;
 305         port->port_a = &scc_ports[0];
 306         port->port_b = &scc_ports[1];
 307         request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 308                             "SCC-B TX", port);
 309         request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 310                             "SCC-B status", port);
 311         request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 312                             "SCC-B RX", port);
 313         request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
 314                             "SCC-B special cond", port);
 315
 316         {
 317                 SCC_ACCESS_INIT(port);  /* Either channel will do */
 318
 319                 /* disable interrupts for this channel */
 320                 SCCwrite(INT_AND_DMA_REG, 0);
 321         }
 322
 323         /* Ensure interrupts are enabled in the MC2 chip */
 324         *(volatile char *)0xfff4201d = 0x14;
 325
 326         /* Initialise the tty driver structures and register */
 327         scc_init_portstructs();
 328         scc_init_drivers();
 329
 330         return 0;
 331 }
 332 #endif
 333
 334
 335 #ifdef CONFIG_BVME6000_SCC
 336 static int bvme6000_scc_init(void)
 337 {
 338         struct scc_port *port;
 339
 340         printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
 341         /* Init channel A */
 342         port = &scc_ports[0];
 343         port->channel = CHANNEL_A;
 344         port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
 345         port->datap = port->ctrlp + 4;
 346         port->port_a = &scc_ports[0];
 347         port->port_b = &scc_ports[1];
 348         request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 349                             "SCC-A TX", port);
 350         request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 351                             "SCC-A status", port);
 352         request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 353                             "SCC-A RX", port);
 354         request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
 355                             "SCC-A special cond", port);
 356         {
 357                 SCC_ACCESS_INIT(port);
 358
 359                 /* disable interrupts for this channel */
 360                 SCCwrite(INT_AND_DMA_REG, 0);
 361                 /* Set the interrupt vector */
 362                 SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
 363                 /* Interrupt parameters: vector includes status, status low */
 364                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 365                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 366         }
 367
 368         /* Init channel B */
 369         port = &scc_ports[1];
 370         port->channel = CHANNEL_B;
 371         port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
 372         port->datap = port->ctrlp + 4;
 373         port->port_a = &scc_ports[0];
 374         port->port_b = &scc_ports[1];
 375         request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 376                             "SCC-B TX", port);
 377         request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 378                             "SCC-B status", port);
 379         request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 380                             "SCC-B RX", port);
 381         request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
 382                             "SCC-B special cond", port);
 383
 384         {
 385                 SCC_ACCESS_INIT(port);  /* Either channel will do */
 386
 387                 /* disable interrupts for this channel */
 388                 SCCwrite(INT_AND_DMA_REG, 0);
 389         }
 390
 391         /* Initialise the tty driver structures and register */
 392         scc_init_portstructs();
 393         scc_init_drivers();
 394
 395         return 0;
 396 }
 397 #endif
 398
 399
 400 static int vme_scc_init(void)
 401 {
 402         int res = -ENODEV;
 403
 404 #ifdef CONFIG_MVME147_SCC
 405         if (MACH_IS_MVME147)
 406                 res = mvme147_scc_init();
 407 #endif
 408 #ifdef CONFIG_MVME162_SCC
 409         if (MACH_IS_MVME16x)
 410                 res = mvme162_scc_init();
 411 #endif
 412 #ifdef CONFIG_BVME6000_SCC
 413         if (MACH_IS_BVME6000)
 414                 res = bvme6000_scc_init();
 415 #endif
 416         return res;
 417 }
 418
 419 module_init(vme_scc_init);
 420
 421
 422 /*---------------------------------------------------------------------------
 423  * Interrupt handlers
 424  *--------------------------------------------------------------------------*/
 425
 426 static irqreturn_t scc_rx_int(int irq, void *data)
 427 {
 428         unsigned char   ch;
 429         struct scc_port *port = data;
 430         struct tty_struct *tty = port->gs.port.tty;
 431         SCC_ACCESS_INIT(port);
 432
 433         ch = SCCread_NB(RX_DATA_REG);
 434         if (!tty) {
 435                 printk(KERN_WARNING "scc_rx_int with NULL tty!\n");
 436                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 437                 return IRQ_HANDLED;
 438         }
 439         tty_insert_flip_char(tty, ch, 0);
 440
 441         /* Check if another character is already ready; in that case, the
 442          * spcond_int() function must be used, because this character may have an
 443          * error condition that isn't signalled by the interrupt vector used!
 444          */
 445         if (SCCread(INT_PENDING_REG) &
 446             (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
 447                 scc_spcond_int (irq, data);
 448                 return IRQ_HANDLED;
 449         }
 450
 451         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 452
 453         tty_flip_buffer_push(tty);
 454         return IRQ_HANDLED;
 455 }
 456
 457
 458 static irqreturn_t scc_spcond_int(int irq, void *data)
 459 {
 460         struct scc_port *port = data;
 461         struct tty_struct *tty = port->gs.port.tty;
 462         unsigned char   stat, ch, err;
 463         int             int_pending_mask = port->channel == CHANNEL_A ?
 464                                            IPR_A_RX : IPR_B_RX;
 465         SCC_ACCESS_INIT(port);
 466
 467         if (!tty) {
 468                 printk(KERN_WARNING "scc_spcond_int with NULL tty!\n");
 469                 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
 470                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 471                 return IRQ_HANDLED;
 472         }
 473         do {
 474                 stat = SCCread(SPCOND_STATUS_REG);
 475                 ch = SCCread_NB(RX_DATA_REG);
 476
 477                 if (stat & SCSR_RX_OVERRUN)
 478                         err = TTY_OVERRUN;
 479                 else if (stat & SCSR_PARITY_ERR)
 480                         err = TTY_PARITY;
 481                 else if (stat & SCSR_CRC_FRAME_ERR)
 482                         err = TTY_FRAME;
 483                 else
 484                         err = 0;
 485
 486                 tty_insert_flip_char(tty, ch, err);
 487
 488                 /* ++TeSche: *All* errors have to be cleared manually,
 489                  * else the condition persists for the next chars
 490                  */
 491                 if (err)
 492                   SCCwrite(COMMAND_REG, CR_ERROR_RESET);
 493
 494         } while(SCCread(INT_PENDING_REG) & int_pending_mask);
 495
 496         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 497
 498         tty_flip_buffer_push(tty);
 499         return IRQ_HANDLED;
 500 }
 501
 502
 503 static irqreturn_t scc_tx_int(int irq, void *data)
 504 {
 505         struct scc_port *port = data;
 506         SCC_ACCESS_INIT(port);
 507
 508         if (!port->gs.port.tty) {
 509                 printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
 510                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 511                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
 512                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 513                 return IRQ_HANDLED;
 514         }
 515         while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
 516                 if (port->x_char) {
 517                         SCCwrite(TX_DATA_REG, port->x_char);
 518                         port->x_char = 0;
 519                 }
 520                 else if ((port->gs.xmit_cnt <= 0) ||
 521                          port->gs.port.tty->stopped ||
 522                          port->gs.port.tty->hw_stopped)
 523                         break;
 524                 else {
 525                         SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
 526                         port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
 527                         if (--port->gs.xmit_cnt <= 0)
 528                                 break;
 529                 }
 530         }
 531         if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped ||
 532             port->gs.port.tty->hw_stopped) {
 533                 /* disable tx interrupts */
 534                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 535                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);   /* disable tx_int on next tx underrun? */
 536                 port->gs.port.flags &= ~GS_TX_INTEN;
 537         }
 538         if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
 539                 tty_wakeup(port->gs.port.tty);
 540
 541         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 542         return IRQ_HANDLED;
 543 }
 544
 545
 546 static irqreturn_t scc_stat_int(int irq, void *data)
 547 {
 548         struct scc_port *port = data;
 549         unsigned channel = port->channel;
 550         unsigned char   last_sr, sr, changed;
 551         SCC_ACCESS_INIT(port);
 552
 553         last_sr = scc_last_status_reg[channel];
 554         sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
 555         changed = last_sr ^ sr;
 556
 557         if (changed & SR_DCD) {
 558                 port->c_dcd = !!(sr & SR_DCD);
 559                 if (!(port->gs.port.flags & ASYNC_CHECK_CD))
 560                         ;       /* Don't report DCD changes */
 561                 else if (port->c_dcd) {
 562                         wake_up_interruptible(&port->gs.port.open_wait);
 563                 }
 564                 else {
 565                         if (port->gs.port.tty)
 566                                 tty_hangup (port->gs.port.tty);
 567                 }
 568         }
 569         SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
 570         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 571         return IRQ_HANDLED;
 572 }
 573
 574
 575 /*---------------------------------------------------------------------------
 576  * generic_serial.c callback funtions
 577  *--------------------------------------------------------------------------*/
 578
 579 static void scc_disable_tx_interrupts(void *ptr)
 580 {
 581         struct scc_port *port = ptr;
 582         unsigned long   flags;
 583         SCC_ACCESS_INIT(port);
 584
 585         local_irq_save(flags);
 586         SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 587         port->gs.port.flags &= ~GS_TX_INTEN;
 588         local_irq_restore(flags);
 589 }
 590
 591
 592 static void scc_enable_tx_interrupts(void *ptr)
 593 {
 594         struct scc_port *port = ptr;
 595         unsigned long   flags;
 596         SCC_ACCESS_INIT(port);
 597
 598         local_irq_save(flags);
 599         SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
 600         /* restart the transmitter */
 601         scc_tx_int (0, port);
 602         local_irq_restore(flags);
 603 }
 604
 605
 606 static void scc_disable_rx_interrupts(void *ptr)
 607 {
 608         struct scc_port *port = ptr;
 609         unsigned long   flags;
 610         SCC_ACCESS_INIT(port);
 611
 612         local_irq_save(flags);
 613         SCCmod(INT_AND_DMA_REG,
 614             ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
 615         local_irq_restore(flags);
 616 }
 617
 618
 619 static void scc_enable_rx_interrupts(void *ptr)
 620 {
 621         struct scc_port *port = ptr;
 622         unsigned long   flags;
 623         SCC_ACCESS_INIT(port);
 624
 625         local_irq_save(flags);
 626         SCCmod(INT_AND_DMA_REG, 0xff,
 627                 IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
 628         local_irq_restore(flags);
 629 }
 630
 631
 632 static int scc_carrier_raised(struct tty_port *port)
 633 {
 634         struct scc_port *sc = container_of(port, struct scc_port, gs.port);
 635         unsigned channel = sc->channel;
 636
 637         return !!(scc_last_status_reg[channel] & SR_DCD);
 638 }
 639
 640
 641 static void scc_shutdown_port(void *ptr)
 642 {
 643         struct scc_port *port = ptr;
 644
 645         port->gs.port.flags &= ~ GS_ACTIVE;
 646         if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
 647                 scc_setsignals (port, 0, 0);
 648         }
 649 }
 650
 651
 652 static int scc_set_real_termios (void *ptr)
 653 {
 654         /* the SCC has char sizes 5,7,6,8 in that order! */
 655         static int chsize_map[4] = { 0, 2, 1, 3 };
 656         unsigned cflag, baud, chsize, channel, brgval = 0;
 657         unsigned long flags;
 658         struct scc_port *port = ptr;
 659         SCC_ACCESS_INIT(port);
 660
 661         if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
 662
 663         channel = port->channel;
 664
 665         if (channel == CHANNEL_A)
 666                 return 0;               /* Settings controlled by boot PROM */
 667
 668         cflag  = port->gs.port.tty->termios->c_cflag;
 669         baud = port->gs.baud;
 670         chsize = (cflag & CSIZE) >> 4;
 671
 672         if (baud == 0) {
 673                 /* speed == 0 -> drop DTR */
 674                 local_irq_save(flags);
 675                 SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
 676                 local_irq_restore(flags);
 677                 return 0;
 678         }
 679         else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
 680                  (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
 681                  (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
 682                 printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud);
 683                 return 0;
 684         }
 685
 686         if (cflag & CLOCAL)
 687                 port->gs.port.flags &= ~ASYNC_CHECK_CD;
 688         else
 689                 port->gs.port.flags |= ASYNC_CHECK_CD;
 690
 691 #ifdef CONFIG_MVME147_SCC
 692         if (MACH_IS_MVME147)
 693                 brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
 694 #endif
 695 #ifdef CONFIG_MVME162_SCC
 696         if (MACH_IS_MVME16x)
 697                 brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
 698 #endif
 699 #ifdef CONFIG_BVME6000_SCC
 700         if (MACH_IS_BVME6000)
 701                 brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
 702 #endif
 703         /* Now we have all parameters and can go to set them: */
 704         local_irq_save(flags);
 705
 706         /* receiver's character size and auto-enables */
 707         SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
 708                         (chsize_map[chsize] << 6) |
 709                         ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
 710         /* parity and stop bits (both, Tx and Rx), clock mode never changes */
 711         SCCmod (AUX1_CTRL_REG,
 712                 ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
 713                 ((cflag & PARENB
 714                   ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
 715                   : A1CR_PARITY_NONE)
 716                  | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
 717         /* sender's character size, set DTR for valid baud rate */
 718         SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
 719         /* clock sources never change */
 720         /* disable BRG before changing the value */
 721         SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
 722         /* BRG value */
 723         SCCwrite(TIMER_LOW_REG, brgval & 0xff);
 724         SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
 725         /* BRG enable, and clock source never changes */
 726         SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
 727
 728         local_irq_restore(flags);
 729
 730         return 0;
 731 }
 732
 733
 734 static int scc_chars_in_buffer (void *ptr)
 735 {
 736         struct scc_port *port = ptr;
 737         SCC_ACCESS_INIT(port);
 738
 739         return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0  : 1;
 740 }
 741
 742
 743 /* Comment taken from sx.c (2.4.0):
 744    I haven't the foggiest why the decrement use count has to happen
 745    here. The whole linux serial drivers stuff needs to be redesigned.
 746    My guess is that this is a hack to minimize the impact of a bug
 747    elsewhere. Thinking about it some more. (try it sometime) Try
 748    running minicom on a serial port that is driven by a modularized
 749    driver. Have the modem hangup. Then remove the driver module. Then
 750    exit minicom.  I expect an "oops".  -- REW */
 751
 752 static void scc_hungup(void *ptr)
 753 {
 754         scc_disable_tx_interrupts(ptr);
 755         scc_disable_rx_interrupts(ptr);
 756 }
 757
 758
 759 static void scc_close(void *ptr)
 760 {
 761         scc_disable_tx_interrupts(ptr);
 762         scc_disable_rx_interrupts(ptr);
 763 }
 764
 765
 766 /*---------------------------------------------------------------------------
 767  * Internal support functions
 768  *--------------------------------------------------------------------------*/
 769
 770 static void scc_setsignals(struct scc_port *port, int dtr, int rts)
 771 {
 772         unsigned long flags;
 773         unsigned char t;
 774         SCC_ACCESS_INIT(port);
 775
 776         local_irq_save(flags);
 777         t = SCCread(TX_CTRL_REG);
 778         if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
 779         if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
 780         SCCwrite(TX_CTRL_REG, t);
 781         local_irq_restore(flags);
 782 }
 783
 784
 785 static void scc_send_xchar(struct tty_struct *tty, char ch)
 786 {
 787         struct scc_port *port = tty->driver_data;
 788
 789         port->x_char = ch;
 790         if (ch)
 791                 scc_enable_tx_interrupts(port);
 792 }
 793
 794
 795 /*---------------------------------------------------------------------------
 796  * Driver entrypoints referenced from above
 797  *--------------------------------------------------------------------------*/
 798
 799 static int scc_open (struct tty_struct * tty, struct file * filp)
 800 {
 801         int line = tty->index;
 802         int retval;
 803         struct scc_port *port = &scc_ports[line];
 804         int i, channel = port->channel;
 805         unsigned long   flags;
 806         SCC_ACCESS_INIT(port);
 807 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
 808         static const struct {
 809                 unsigned reg, val;
 810         } mvme_init_tab[] = {
 811                 /* Values for MVME162 and MVME147 */
 812                 /* no parity, 1 stop bit, async, 1:16 */
 813                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
 814                 /* parity error is special cond, ints disabled, no DMA */
 815                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
 816                 /* Rx 8 bits/char, no auto enable, Rx off */
 817                 { RX_CTRL_REG, RCR_CHSIZE_8 },
 818                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
 819                 { TX_CTRL_REG, TCR_CHSIZE_8 },
 820                 /* special features off */
 821                 { AUX2_CTRL_REG, 0 },
 822                 { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
 823                 { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
 824                 /* Start Rx */
 825                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
 826                 /* Start Tx */
 827                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
 828                 /* Ext/Stat ints: DCD only */
 829                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
 830                 /* Reset Ext/Stat ints */
 831                 { COMMAND_REG, CR_EXTSTAT_RESET },
 832                 /* ...again */
 833                 { COMMAND_REG, CR_EXTSTAT_RESET },
 834         };
 835 #endif
 836 #if defined(CONFIG_BVME6000_SCC)
 837         static const struct {
 838                 unsigned reg, val;
 839         } bvme_init_tab[] = {
 840                 /* Values for BVME6000 */
 841                 /* no parity, 1 stop bit, async, 1:16 */
 842                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
 843                 /* parity error is special cond, ints disabled, no DMA */
 844                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
 845                 /* Rx 8 bits/char, no auto enable, Rx off */
 846                 { RX_CTRL_REG, RCR_CHSIZE_8 },
 847                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
 848                 { TX_CTRL_REG, TCR_CHSIZE_8 },
 849                 /* special features off */
 850                 { AUX2_CTRL_REG, 0 },
 851                 { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
 852                 { DPLL_CTRL_REG, DCR_BRG_ENAB },
 853                 /* Start Rx */
 854                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
 855                 /* Start Tx */
 856                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
 857                 /* Ext/Stat ints: DCD only */
 858                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
 859                 /* Reset Ext/Stat ints */
 860                 { COMMAND_REG, CR_EXTSTAT_RESET },
 861                 /* ...again */
 862                 { COMMAND_REG, CR_EXTSTAT_RESET },
 863         };
 864 #endif
 865         if (!(port->gs.port.flags & ASYNC_INITIALIZED)) {
 866                 local_irq_save(flags);
 867 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
 868                 if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
 869                         for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i)
 870                                 SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
 871                 }
 872 #endif
 873 #if defined(CONFIG_BVME6000_SCC)
 874                 if (MACH_IS_BVME6000) {
 875                         for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i)
 876                                 SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
 877                 }
 878 #endif
 879
 880                 /* remember status register for detection of DCD and CTS changes */
 881                 scc_last_status_reg[channel] = SCCread(STATUS_REG);
 882
 883                 port->c_dcd = 0;        /* Prevent initial 1->0 interrupt */
 884                 scc_setsignals (port, 1,1);
 885                 local_irq_restore(flags);
 886         }
 887
 888         tty->driver_data = port;
 889         port->gs.port.tty = tty;
 890         port->gs.port.count++;
 891         retval = gs_init_port(&port->gs);
 892         if (retval) {
 893                 port->gs.port.count--;
 894                 return retval;
 895         }
 896         port->gs.port.flags |= GS_ACTIVE;
 897         retval = gs_block_til_ready(port, filp);
 898
 899         if (retval) {
 900                 port->gs.port.count--;
 901                 return retval;
 902         }
 903
 904         port->c_dcd = tty_port_carrier_raised(&port->gs.port);
 905
 906         scc_enable_rx_interrupts(port);
 907
 908         return 0;
 909 }
 910
 911
 912 static void scc_throttle (struct tty_struct * tty)
 913 {
 914         struct scc_port *port = tty->driver_data;
 915         unsigned long   flags;
 916         SCC_ACCESS_INIT(port);
 917
 918         if (tty->termios->c_cflag & CRTSCTS) {
 919                 local_irq_save(flags);
 920                 SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
 921                 local_irq_restore(flags);
 922         }
 923         if (I_IXOFF(tty))
 924                 scc_send_xchar(tty, STOP_CHAR(tty));
 925 }
 926
 927
 928 static void scc_unthrottle (struct tty_struct * tty)
 929 {
 930         struct scc_port *port = tty->driver_data;
 931         unsigned long   flags;
 932         SCC_ACCESS_INIT(port);
 933
 934         if (tty->termios->c_cflag & CRTSCTS) {
 935                 local_irq_save(flags);
 936                 SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
 937                 local_irq_restore(flags);
 938         }
 939         if (I_IXOFF(tty))
 940                 scc_send_xchar(tty, START_CHAR(tty));
 941 }
 942
 943
 944 static int scc_ioctl(struct tty_struct *tty, struct file *file,
 945                      unsigned int cmd, unsigned long arg)
 946 {
 947         return -ENOIOCTLCMD;
 948 }
 949
 950
 951 static int scc_break_ctl(struct tty_struct *tty, int break_state)
 952 {
 953         struct scc_port *port = tty->driver_data;
 954         unsigned long   flags;
 955         SCC_ACCESS_INIT(port);
 956
 957         local_irq_save(flags);
 958         SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK,
 959                         break_state ? TCR_SEND_BREAK : 0);
 960         local_irq_restore(flags);
 961         return 0;
 962 }
 963
 964
 965 /*---------------------------------------------------------------------------
 966  * Serial console stuff...
 967  *--------------------------------------------------------------------------*/
 968
 969 #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
 970
 971 static void scc_ch_write (char ch)
 972 {
 973         volatile char *p = NULL;
 974
 975 #ifdef CONFIG_MVME147_SCC
 976         if (MACH_IS_MVME147)
 977                 p = (volatile char *)M147_SCC_A_ADDR;
 978 #endif
 979 #ifdef CONFIG_MVME162_SCC
 980         if (MACH_IS_MVME16x)
 981                 p = (volatile char *)MVME_SCC_A_ADDR;
 982 #endif
 983 #ifdef CONFIG_BVME6000_SCC
 984         if (MACH_IS_BVME6000)
 985                 p = (volatile char *)BVME_SCC_A_ADDR;
 986 #endif
 987
 988         do {
 989                 scc_delay();
 990         }
 991         while (!(*p & 4));
 992         scc_delay();
 993         *p = 8;
 994         scc_delay();
 995         *p = ch;
 996 }
 997
 998 /* The console must be locked when we get here. */
 999
1000 static void scc_console_write (struct console *co, const char *str, unsigned count)
1001 {
1002         unsigned long   flags;
1003
1004         local_irq_save(flags);
1005
1006         while (count--)
1007         {
1008                 if (*str == '\n')
1009                         scc_ch_write ('\r');
1010                 scc_ch_write (*str++);
1011         }
1012         local_irq_restore(flags);
1013 }
1014
1015 static struct tty_driver *scc_console_device(struct console *c, int *index)
1016 {
1017         *index = c->index;
1018         return scc_driver;
1019 }
1020
1021 static struct console sercons = {
1022         .name           = "ttyS",
1023         .write          = scc_console_write,
1024         .device         = scc_console_device,
1025         .flags          = CON_PRINTBUFFER,
1026         .index          = -1,
1027 };
1028
1029
1030 static int __init vme_scc_console_init(void)
1031 {
1032         if (vme_brdtype == VME_TYPE_MVME147 ||
1033                         vme_brdtype == VME_TYPE_MVME162 ||
1034                         vme_brdtype == VME_TYPE_MVME172 ||
1035                         vme_brdtype == VME_TYPE_BVME4000 ||
1036                         vme_brdtype == VME_TYPE_BVME6000)
1037                 register_console(&sercons);
1038         return 0;
1039 }
1040 console_initcall(vme_scc_console_init);