odroid: remove CONFIG_DM_I2C_COMPAT config
[platform/kernel/u-boot.git] / drivers / block / sata_ceva.c
1 /*
2  * (C) Copyright 2015 - 2016 Xilinx, Inc.
3  * Michal Simek <michal.simek@xilinx.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7 #include <common.h>
8 #include <dm.h>
9 #include <netdev.h>
10 #include <ahci.h>
11 #include <scsi.h>
12 #include <asm/arch/hardware.h>
13
14 #include <asm/io.h>
15
16 /* Vendor Specific Register Offsets */
17 #define AHCI_VEND_PCFG  0xA4
18 #define AHCI_VEND_PPCFG 0xA8
19 #define AHCI_VEND_PP2C  0xAC
20 #define AHCI_VEND_PP3C  0xB0
21 #define AHCI_VEND_PP4C  0xB4
22 #define AHCI_VEND_PP5C  0xB8
23 #define AHCI_VEND_PAXIC 0xC0
24 #define AHCI_VEND_PTC   0xC8
25
26 /* Vendor Specific Register bit definitions */
27 #define PAXIC_ADBW_BW64 0x1
28 #define PAXIC_MAWIDD    (1 << 8)
29 #define PAXIC_MARIDD    (1 << 16)
30 #define PAXIC_OTL       (0x4 << 20)
31
32 #define PCFG_TPSS_VAL   (0x32 << 16)
33 #define PCFG_TPRS_VAL   (0x2 << 12)
34 #define PCFG_PAD_VAL    0x2
35
36 #define PPCFG_TTA       0x1FFFE
37 #define PPCFG_PSSO_EN   (1 << 28)
38 #define PPCFG_PSS_EN    (1 << 29)
39 #define PPCFG_ESDF_EN   (1 << 31)
40
41 #define PP2C_CIBGMN     0x0F
42 #define PP2C_CIBGMX     (0x25 << 8)
43 #define PP2C_CIBGN      (0x18 << 16)
44 #define PP2C_CINMP      (0x29 << 24)
45
46 #define PP3C_CWBGMN     0x04
47 #define PP3C_CWBGMX     (0x0B << 8)
48 #define PP3C_CWBGN      (0x08 << 16)
49 #define PP3C_CWNMP      (0x0F << 24)
50
51 #define PP4C_BMX        0x0a
52 #define PP4C_BNM        (0x08 << 8)
53 #define PP4C_SFD        (0x4a << 16)
54 #define PP4C_PTST       (0x06 << 24)
55
56 #define PP5C_RIT        0x60216
57 #define PP5C_RCT        (0x7f0 << 20)
58
59 #define PTC_RX_WM_VAL   0x40
60 #define PTC_RSVD        (1 << 27)
61
62 #define PORT0_BASE      0x100
63 #define PORT1_BASE      0x180
64
65 /* Port Control Register Bit Definitions */
66 #define PORT_SCTL_SPD_GEN3      (0x3 << 4)
67 #define PORT_SCTL_SPD_GEN2      (0x2 << 4)
68 #define PORT_SCTL_SPD_GEN1      (0x1 << 4)
69 #define PORT_SCTL_IPM           (0x3 << 8)
70
71 #define PORT_BASE       0x100
72 #define PORT_OFFSET     0x80
73 #define NR_PORTS        2
74 #define DRV_NAME        "ahci-ceva"
75 #define CEVA_FLAG_BROKEN_GEN2   1
76
77 static int ceva_init_sata(ulong mmio)
78 {
79         ulong tmp;
80         int i;
81
82         /*
83          * AXI Data bus width to 64
84          * Set Mem Addr Read, Write ID for data transfers
85          * Transfer limit to 72 DWord
86          */
87         tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
88         writel(tmp, mmio + AHCI_VEND_PAXIC);
89
90         /* Set AHCI Enable */
91         tmp = readl(mmio + HOST_CTL);
92         tmp |= HOST_AHCI_EN;
93         writel(tmp, mmio + HOST_CTL);
94
95         for (i = 0; i < NR_PORTS; i++) {
96                 /* TPSS TPRS scalars, CISE and Port Addr */
97                 tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
98                 writel(tmp, mmio + AHCI_VEND_PCFG);
99
100                 /* Port Phy Cfg register enables */
101                 tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
102                 writel(tmp, mmio + AHCI_VEND_PPCFG);
103
104                 /* Rx Watermark setting  */
105                 tmp = PTC_RX_WM_VAL | PTC_RSVD;
106                 writel(tmp, mmio + AHCI_VEND_PTC);
107
108                 /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
109                 tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
110                 writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
111         }
112         return 0;
113 }
114
115 static int sata_ceva_probe(struct udevice *dev)
116 {
117         struct scsi_platdata *plat = dev_get_platdata(dev);
118
119         ceva_init_sata(plat->base);
120         return 0;
121 }
122
123 static const struct udevice_id sata_ceva_ids[] = {
124         { .compatible = "ceva,ahci-1v84" },
125         { }
126 };
127
128 static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
129 {
130         struct scsi_platdata *plat = dev_get_platdata(dev);
131
132         plat->base = devfdt_get_addr(dev);
133         if (plat->base == FDT_ADDR_T_NONE)
134                 return -EINVAL;
135
136         /* Hardcode number for ceva sata controller */
137         plat->max_lun = 1; /* Actually two but untested */
138         plat->max_id = 2;
139
140         return 0;
141 }
142
143 U_BOOT_DRIVER(ceva_host_blk) = {
144         .name = "ceva_sata",
145         .id = UCLASS_SCSI,
146         .of_match = sata_ceva_ids,
147         .probe = sata_ceva_probe,
148         .ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
149         .platdata_auto_alloc_size = sizeof(struct scsi_platdata),
150 };