net: rtl8192cu: fix wrong configuration in Makefile
[platform/kernel/linux-rpi.git] / drivers / auxdisplay / hd44780.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * HD44780 Character LCD driver for Linux
4  *
5  * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu>
6  * Copyright (C) 2016-2017 Glider bvba
7  */
8
9 #include <linux/delay.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/module.h>
12 #include <linux/mod_devicetable.h>
13 #include <linux/platform_device.h>
14 #include <linux/property.h>
15 #include <linux/slab.h>
16
17 #include "charlcd.h"
18 #include "hd44780_common.h"
19
20 enum hd44780_pin {
21         /* Order does matter due to writing to GPIO array subsets! */
22         PIN_DATA0,      /* Optional */
23         PIN_DATA1,      /* Optional */
24         PIN_DATA2,      /* Optional */
25         PIN_DATA3,      /* Optional */
26         PIN_DATA4,
27         PIN_DATA5,
28         PIN_DATA6,
29         PIN_DATA7,
30         PIN_CTRL_RS,
31         PIN_CTRL_RW,    /* Optional */
32         PIN_CTRL_E,
33         PIN_CTRL_BL,   /* Optional */
34         PIN_NUM
35 };
36
37 struct hd44780 {
38         struct gpio_desc *pins[PIN_NUM];
39 };
40
41 static void hd44780_backlight(struct charlcd *lcd, enum charlcd_onoff on)
42 {
43         struct hd44780_common *hdc = lcd->drvdata;
44         struct hd44780 *hd = hdc->hd44780;
45
46         if (hd->pins[PIN_CTRL_BL])
47                 gpiod_set_value_cansleep(hd->pins[PIN_CTRL_BL], on);
48 }
49
50 static void hd44780_strobe_gpio(struct hd44780 *hd)
51 {
52         /* Maintain the data during 20 us before the strobe */
53         udelay(20);
54
55         gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 1);
56
57         /* Maintain the strobe during 40 us */
58         udelay(40);
59
60         gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 0);
61 }
62
63 /* write to an LCD panel register in 8 bit GPIO mode */
64 static void hd44780_write_gpio8(struct hd44780 *hd, u8 val, unsigned int rs)
65 {
66         DECLARE_BITMAP(values, 10); /* for DATA[0-7], RS, RW */
67         unsigned int n;
68
69         values[0] = val;
70         __assign_bit(8, values, rs);
71         n = hd->pins[PIN_CTRL_RW] ? 10 : 9;
72
73         /* Present the data to the port */
74         gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA0], NULL, values);
75
76         hd44780_strobe_gpio(hd);
77 }
78
79 /* write to an LCD panel register in 4 bit GPIO mode */
80 static void hd44780_write_gpio4(struct hd44780 *hd, u8 val, unsigned int rs)
81 {
82         DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */
83         unsigned int n;
84
85         /* High nibble + RS, RW */
86         values[0] = val >> 4;
87         __assign_bit(4, values, rs);
88         n = hd->pins[PIN_CTRL_RW] ? 6 : 5;
89
90         /* Present the data to the port */
91         gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values);
92
93         hd44780_strobe_gpio(hd);
94
95         /* Low nibble */
96         values[0] &= ~0x0fUL;
97         values[0] |= val & 0x0f;
98
99         /* Present the data to the port */
100         gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values);
101
102         hd44780_strobe_gpio(hd);
103 }
104
105 /* Send a command to the LCD panel in 8 bit GPIO mode */
106 static void hd44780_write_cmd_gpio8(struct hd44780_common *hdc, int cmd)
107 {
108         struct hd44780 *hd = hdc->hd44780;
109
110         hd44780_write_gpio8(hd, cmd, 0);
111
112         /* The shortest command takes at least 120 us */
113         udelay(120);
114 }
115
116 /* Send data to the LCD panel in 8 bit GPIO mode */
117 static void hd44780_write_data_gpio8(struct hd44780_common *hdc, int data)
118 {
119         struct hd44780 *hd = hdc->hd44780;
120
121         hd44780_write_gpio8(hd, data, 1);
122
123         /* The shortest data takes at least 45 us */
124         udelay(45);
125 }
126
127 static const struct charlcd_ops hd44780_ops_gpio8 = {
128         .backlight      = hd44780_backlight,
129         .print          = hd44780_common_print,
130         .gotoxy         = hd44780_common_gotoxy,
131         .home           = hd44780_common_home,
132         .clear_display  = hd44780_common_clear_display,
133         .init_display   = hd44780_common_init_display,
134         .shift_cursor   = hd44780_common_shift_cursor,
135         .shift_display  = hd44780_common_shift_display,
136         .display        = hd44780_common_display,
137         .cursor         = hd44780_common_cursor,
138         .blink          = hd44780_common_blink,
139         .fontsize       = hd44780_common_fontsize,
140         .lines          = hd44780_common_lines,
141         .redefine_char  = hd44780_common_redefine_char,
142 };
143
144 /* Send a command to the LCD panel in 4 bit GPIO mode */
145 static void hd44780_write_cmd_gpio4(struct hd44780_common *hdc, int cmd)
146 {
147         struct hd44780 *hd = hdc->hd44780;
148
149         hd44780_write_gpio4(hd, cmd, 0);
150
151         /* The shortest command takes at least 120 us */
152         udelay(120);
153 }
154
155 /* Send 4-bits of a command to the LCD panel in raw 4 bit GPIO mode */
156 static void hd44780_write_cmd_raw_gpio4(struct hd44780_common *hdc, int cmd)
157 {
158         DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */
159         struct hd44780 *hd = hdc->hd44780;
160         unsigned int n;
161
162         /* Command nibble + RS, RW */
163         values[0] = cmd & 0x0f;
164         n = hd->pins[PIN_CTRL_RW] ? 6 : 5;
165
166         /* Present the data to the port */
167         gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values);
168
169         hd44780_strobe_gpio(hd);
170 }
171
172 /* Send data to the LCD panel in 4 bit GPIO mode */
173 static void hd44780_write_data_gpio4(struct hd44780_common *hdc, int data)
174 {
175         struct hd44780 *hd = hdc->hd44780;
176
177         hd44780_write_gpio4(hd, data, 1);
178
179         /* The shortest data takes at least 45 us */
180         udelay(45);
181 }
182
183 static const struct charlcd_ops hd44780_ops_gpio4 = {
184         .backlight      = hd44780_backlight,
185         .print          = hd44780_common_print,
186         .gotoxy         = hd44780_common_gotoxy,
187         .home           = hd44780_common_home,
188         .clear_display  = hd44780_common_clear_display,
189         .init_display   = hd44780_common_init_display,
190         .shift_cursor   = hd44780_common_shift_cursor,
191         .shift_display  = hd44780_common_shift_display,
192         .display        = hd44780_common_display,
193         .cursor         = hd44780_common_cursor,
194         .blink          = hd44780_common_blink,
195         .fontsize       = hd44780_common_fontsize,
196         .lines          = hd44780_common_lines,
197         .redefine_char  = hd44780_common_redefine_char,
198 };
199
200 static int hd44780_probe(struct platform_device *pdev)
201 {
202         struct device *dev = &pdev->dev;
203         unsigned int i, base;
204         struct charlcd *lcd;
205         struct hd44780_common *hdc;
206         struct hd44780 *hd;
207         int ifwidth, ret = -ENOMEM;
208
209         /* Required pins */
210         ifwidth = gpiod_count(dev, "data");
211         if (ifwidth < 0)
212                 return ifwidth;
213
214         switch (ifwidth) {
215         case 4:
216                 base = PIN_DATA4;
217                 break;
218         case 8:
219                 base = PIN_DATA0;
220                 break;
221         default:
222                 return -EINVAL;
223         }
224
225         hdc = hd44780_common_alloc();
226         if (!hdc)
227                 return -ENOMEM;
228
229         lcd = charlcd_alloc();
230         if (!lcd)
231                 goto fail1;
232
233         hd = kzalloc(sizeof(struct hd44780), GFP_KERNEL);
234         if (!hd)
235                 goto fail2;
236
237         hdc->hd44780 = hd;
238         lcd->drvdata = hdc;
239         for (i = 0; i < ifwidth; i++) {
240                 hd->pins[base + i] = devm_gpiod_get_index(dev, "data", i,
241                                                           GPIOD_OUT_LOW);
242                 if (IS_ERR(hd->pins[base + i])) {
243                         ret = PTR_ERR(hd->pins[base + i]);
244                         goto fail3;
245                 }
246         }
247
248         hd->pins[PIN_CTRL_E] = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
249         if (IS_ERR(hd->pins[PIN_CTRL_E])) {
250                 ret = PTR_ERR(hd->pins[PIN_CTRL_E]);
251                 goto fail3;
252         }
253
254         hd->pins[PIN_CTRL_RS] = devm_gpiod_get(dev, "rs", GPIOD_OUT_HIGH);
255         if (IS_ERR(hd->pins[PIN_CTRL_RS])) {
256                 ret = PTR_ERR(hd->pins[PIN_CTRL_RS]);
257                 goto fail3;
258         }
259
260         /* Optional pins */
261         hd->pins[PIN_CTRL_RW] = devm_gpiod_get_optional(dev, "rw",
262                                                         GPIOD_OUT_LOW);
263         if (IS_ERR(hd->pins[PIN_CTRL_RW])) {
264                 ret = PTR_ERR(hd->pins[PIN_CTRL_RW]);
265                 goto fail3;
266         }
267
268         hd->pins[PIN_CTRL_BL] = devm_gpiod_get_optional(dev, "backlight",
269                                                         GPIOD_OUT_LOW);
270         if (IS_ERR(hd->pins[PIN_CTRL_BL])) {
271                 ret = PTR_ERR(hd->pins[PIN_CTRL_BL]);
272                 goto fail3;
273         }
274
275         /* Required properties */
276         ret = device_property_read_u32(dev, "display-height-chars",
277                                        &lcd->height);
278         if (ret)
279                 goto fail3;
280         ret = device_property_read_u32(dev, "display-width-chars", &lcd->width);
281         if (ret)
282                 goto fail3;
283
284         /*
285          * On displays with more than two rows, the internal buffer width is
286          * usually equal to the display width
287          */
288         if (lcd->height > 2)
289                 hdc->bwidth = lcd->width;
290
291         /* Optional properties */
292         device_property_read_u32(dev, "internal-buffer-width", &hdc->bwidth);
293
294         hdc->ifwidth = ifwidth;
295         if (ifwidth == 8) {
296                 lcd->ops = &hd44780_ops_gpio8;
297                 hdc->write_data = hd44780_write_data_gpio8;
298                 hdc->write_cmd = hd44780_write_cmd_gpio8;
299         } else {
300                 lcd->ops = &hd44780_ops_gpio4;
301                 hdc->write_data = hd44780_write_data_gpio4;
302                 hdc->write_cmd = hd44780_write_cmd_gpio4;
303                 hdc->write_cmd_raw4 = hd44780_write_cmd_raw_gpio4;
304         }
305
306         ret = charlcd_register(lcd);
307         if (ret)
308                 goto fail3;
309
310         platform_set_drvdata(pdev, lcd);
311         return 0;
312
313 fail3:
314         kfree(hd);
315 fail2:
316         kfree(lcd);
317 fail1:
318         kfree(hdc);
319         return ret;
320 }
321
322 static int hd44780_remove(struct platform_device *pdev)
323 {
324         struct charlcd *lcd = platform_get_drvdata(pdev);
325
326         charlcd_unregister(lcd);
327         kfree(lcd->drvdata);
328
329         kfree(lcd);
330         return 0;
331 }
332
333 static const struct of_device_id hd44780_of_match[] = {
334         { .compatible = "hit,hd44780" },
335         { /* sentinel */ }
336 };
337 MODULE_DEVICE_TABLE(of, hd44780_of_match);
338
339 static struct platform_driver hd44780_driver = {
340         .probe = hd44780_probe,
341         .remove = hd44780_remove,
342         .driver         = {
343                 .name   = "hd44780",
344                 .of_match_table = hd44780_of_match,
345         },
346 };
347
348 module_platform_driver(hd44780_driver);
349 MODULE_DESCRIPTION("HD44780 Character LCD driver");
350 MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
351 MODULE_LICENSE("GPL");