1 /* SPDX-License-Identifier: GPL-2.0 */
9 #define SMALL_BUFFER_SIZE 384 /* size of small buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
10 #define LARGE_BUFFER_SIZE 4032 /* size of large buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
13 #define RBD_BLK_SIZE 32 /* nbr of supplied rx buffers per rbd */
16 #define MAX_PDU_SIZE 65535 /* maximum PDU size supported by AALs */
19 #define BUFFER_S1_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 1 */
20 #define BUFFER_L1_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 1 */
22 #define BUFFER_S2_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 2 */
23 #define BUFFER_L2_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 2 */
25 #define BUFFER_S1_NBR (RBD_BLK_SIZE * 6)
26 #define BUFFER_L1_NBR (RBD_BLK_SIZE * 4)
28 #define BUFFER_S2_NBR (RBD_BLK_SIZE * 6)
29 #define BUFFER_L2_NBR (RBD_BLK_SIZE * 4)
32 #define QUEUE_SIZE_CMD 16 /* command queue capacity */
33 #define QUEUE_SIZE_RX 64 /* receive queue capacity */
34 #define QUEUE_SIZE_TX 256 /* transmit queue capacity */
35 #define QUEUE_SIZE_BS 32 /* buffer supply queue capacity */
37 #define FORE200E_VPI_BITS 0
38 #define FORE200E_VCI_BITS 10
39 #define NBR_CONNECT (1 << (FORE200E_VPI_BITS + FORE200E_VCI_BITS)) /* number of connections */
43 #define TSD_EXTENSION 0
44 #define TSD_NBR (TSD_FIXED + TSD_EXTENSION)
47 /* the cp starts putting a received PDU into one *small* buffer,
48 then it uses a number of *large* buffers for the trailing data.
49 we compute here the total number of receive segment descriptors
50 required to hold the largest possible PDU */
52 #define RSD_REQUIRED (((MAX_PDU_SIZE - SMALL_BUFFER_SIZE + LARGE_BUFFER_SIZE) / LARGE_BUFFER_SIZE) + 1)
56 /* RSD_REQUIRED receive segment descriptors are enough to describe a max-sized PDU,
57 but we have to keep the size of the receive PDU descriptor multiple of 32 bytes,
58 so we add one extra RSD to RSD_EXTENSION
59 (WARNING: THIS MAY CHANGE IF BUFFER SIZES ARE MODIFIED) */
61 #define RSD_EXTENSION ((RSD_REQUIRED - RSD_FIXED) + 1)
62 #define RSD_NBR (RSD_FIXED + RSD_EXTENSION)
65 #define FORE200E_DEV(d) ((struct fore200e*)((d)->dev_data))
66 #define FORE200E_VCC(d) ((struct fore200e_vcc*)((d)->dev_data))
68 /* bitfields endian games */
70 #if defined(__LITTLE_ENDIAN_BITFIELD)
71 #define BITFIELD2(b1, b2) b1; b2;
72 #define BITFIELD3(b1, b2, b3) b1; b2; b3;
73 #define BITFIELD4(b1, b2, b3, b4) b1; b2; b3; b4;
74 #define BITFIELD5(b1, b2, b3, b4, b5) b1; b2; b3; b4; b5;
75 #define BITFIELD6(b1, b2, b3, b4, b5, b6) b1; b2; b3; b4; b5; b6;
76 #elif defined(__BIG_ENDIAN_BITFIELD)
77 #define BITFIELD2(b1, b2) b2; b1;
78 #define BITFIELD3(b1, b2, b3) b3; b2; b1;
79 #define BITFIELD4(b1, b2, b3, b4) b4; b3; b2; b1;
80 #define BITFIELD5(b1, b2, b3, b4, b5) b5; b4; b3; b2; b1;
81 #define BITFIELD6(b1, b2, b3, b4, b5, b6) b6; b5; b4; b3; b2; b1;
83 #error unknown bitfield endianess
87 /* ATM cell header (minus HEC byte) */
89 typedef struct atm_header {
91 u32 clp : 1, /* cell loss priority */
92 u32 plt : 3, /* payload type */
93 u32 vci : 16, /* virtual channel identifier */
94 u32 vpi : 8, /* virtual path identifier */
95 u32 gfc : 4 /* generic flow control */
100 /* ATM adaptation layer id */
102 typedef enum fore200e_aal {
109 /* transmit PDU descriptor specification */
111 typedef struct tpd_spec {
113 u32 length : 16, /* total PDU length */
114 u32 nseg : 8, /* number of transmit segments */
115 enum fore200e_aal aal : 4, /* adaptation layer */
116 u32 intr : 4 /* interrupt requested */
121 /* transmit PDU rate control */
123 typedef struct tpd_rate
126 u32 idle_cells : 16, /* number of idle cells to insert */
127 u32 data_cells : 16 /* number of data cells to transmit */
132 /* transmit segment descriptor */
135 u32 buffer; /* transmit buffer DMA address */
136 u32 length; /* number of bytes in buffer */
140 /* transmit PDU descriptor */
143 struct atm_header atm_header; /* ATM header minus HEC byte */
144 struct tpd_spec spec; /* tpd specification */
145 struct tpd_rate rate; /* tpd rate control */
146 u32 pad; /* reserved */
147 struct tsd tsd[ TSD_NBR ]; /* transmit segment descriptors */
151 /* receive segment descriptor */
154 u32 handle; /* host supplied receive buffer handle */
155 u32 length; /* number of bytes in buffer */
159 /* receive PDU descriptor */
162 struct atm_header atm_header; /* ATM header minus HEC byte */
163 u32 nseg; /* number of receive segments */
164 struct rsd rsd[ RSD_NBR ]; /* receive segment descriptors */
170 typedef enum buffer_scheme {
173 BUFFER_SCHEME_NBR /* always last */
177 /* buffer magnitude */
179 typedef enum buffer_magn {
182 BUFFER_MAGN_NBR /* always last */
186 /* receive buffer descriptor */
189 u32 handle; /* host supplied handle */
190 u32 buffer_haddr; /* host DMA address of host buffer */
194 /* receive buffer descriptor block */
196 typedef struct rbd_block {
197 struct rbd rbd[ RBD_BLK_SIZE ]; /* receive buffer descriptor */
201 /* tpd DMA address */
203 typedef struct tpd_haddr {
205 u32 size : 4, /* tpd size expressed in 32 byte blocks */
206 u32 pad : 1, /* reserved */
207 u32 haddr : 27 /* tpd DMA addr aligned on 32 byte boundary */
211 #define TPD_HADDR_SHIFT 5 /* addr aligned on 32 byte boundary */
213 /* cp resident transmit queue entry */
215 typedef struct cp_txq_entry {
216 struct tpd_haddr tpd_haddr; /* host DMA address of tpd */
217 u32 status_haddr; /* host DMA address of completion status */
221 /* cp resident receive queue entry */
223 typedef struct cp_rxq_entry {
224 u32 rpd_haddr; /* host DMA address of rpd */
225 u32 status_haddr; /* host DMA address of completion status */
229 /* cp resident buffer supply queue entry */
231 typedef struct cp_bsq_entry {
232 u32 rbd_block_haddr; /* host DMA address of rbd block */
233 u32 status_haddr; /* host DMA address of completion status */
237 /* completion status */
239 typedef volatile enum status {
240 STATUS_PENDING = (1<<0), /* initial status (written by host) */
241 STATUS_COMPLETE = (1<<1), /* completion status (written by cp) */
242 STATUS_FREE = (1<<2), /* initial status (written by host) */
243 STATUS_ERROR = (1<<3) /* completion status (written by cp) */
247 /* cp operation code */
249 typedef enum opcode {
250 OPCODE_INITIALIZE = 1, /* initialize board */
251 OPCODE_ACTIVATE_VCIN, /* activate incoming VCI */
252 OPCODE_ACTIVATE_VCOUT, /* activate outgoing VCI */
253 OPCODE_DEACTIVATE_VCIN, /* deactivate incoming VCI */
254 OPCODE_DEACTIVATE_VCOUT, /* deactivate incoing VCI */
255 OPCODE_GET_STATS, /* get board statistics */
256 OPCODE_SET_OC3, /* set OC-3 registers */
257 OPCODE_GET_OC3, /* get OC-3 registers */
258 OPCODE_RESET_STATS, /* reset board statistics */
259 OPCODE_GET_PROM, /* get expansion PROM data (PCI specific) */
260 OPCODE_SET_VPI_BITS, /* set x bits of those decoded by the
261 firmware to be low order bits from
262 the VPI field of the ATM cell header */
263 OPCODE_REQUEST_INTR = (1<<7) /* request interrupt */
267 /* virtual path / virtual channel identifiers */
269 typedef struct vpvc {
271 u32 vci : 16, /* virtual channel identifier */
272 u32 vpi : 8, /* virtual path identifier */
273 u32 pad : 8 /* reserved */
278 /* activate VC command opcode */
280 typedef struct activate_opcode {
282 enum opcode opcode : 8, /* cp opcode */
283 enum fore200e_aal aal : 8, /* adaptation layer */
284 enum buffer_scheme scheme : 8, /* buffer scheme */
285 u32 pad : 8 /* reserved */
290 /* activate VC command block */
292 typedef struct activate_block {
293 struct activate_opcode opcode; /* activate VC command opcode */
294 struct vpvc vpvc; /* VPI/VCI */
295 u32 mtu; /* for AAL0 only */
300 /* deactivate VC command opcode */
302 typedef struct deactivate_opcode {
304 enum opcode opcode : 8, /* cp opcode */
305 u32 pad : 24 /* reserved */
307 } deactivate_opcode_t;
310 /* deactivate VC command block */
312 typedef struct deactivate_block {
313 struct deactivate_opcode opcode; /* deactivate VC command opcode */
314 struct vpvc vpvc; /* VPI/VCI */
315 } deactivate_block_t;
320 typedef struct oc3_regs {
321 u32 reg[ 128 ]; /* see the PMC Sierra PC5346 S/UNI-155-Lite
322 Saturn User Network Interface documentation
323 for a description of the OC-3 chip registers */
327 /* set/get OC-3 regs command opcode */
329 typedef struct oc3_opcode {
331 enum opcode opcode : 8, /* cp opcode */
332 u32 reg : 8, /* register index */
333 u32 value : 8, /* register value */
334 u32 mask : 8 /* register mask that specifies which
335 bits of the register value field
341 /* set/get OC-3 regs command block */
343 typedef struct oc3_block {
344 struct oc3_opcode opcode; /* set/get OC-3 regs command opcode */
345 u32 regs_haddr; /* host DMA address of OC-3 regs buffer */
349 /* physical encoding statistics */
351 typedef struct stats_phy {
352 __be32 crc_header_errors; /* cells received with bad header CRC */
353 __be32 framing_errors; /* cells received with bad framing */
354 __be32 pad[ 2 ]; /* i960 padding */
358 /* OC-3 statistics */
360 typedef struct stats_oc3 {
361 __be32 section_bip8_errors; /* section 8 bit interleaved parity */
362 __be32 path_bip8_errors; /* path 8 bit interleaved parity */
363 __be32 line_bip24_errors; /* line 24 bit interleaved parity */
364 __be32 line_febe_errors; /* line far end block errors */
365 __be32 path_febe_errors; /* path far end block errors */
366 __be32 corr_hcs_errors; /* correctable header check sequence */
367 __be32 ucorr_hcs_errors; /* uncorrectable header check sequence */
368 __be32 pad[ 1 ]; /* i960 padding */
374 typedef struct stats_atm {
375 __be32 cells_transmitted; /* cells transmitted */
376 __be32 cells_received; /* cells received */
377 __be32 vpi_bad_range; /* cell drops: VPI out of range */
378 __be32 vpi_no_conn; /* cell drops: no connection for VPI */
379 __be32 vci_bad_range; /* cell drops: VCI out of range */
380 __be32 vci_no_conn; /* cell drops: no connection for VCI */
381 __be32 pad[ 2 ]; /* i960 padding */
384 /* AAL0 statistics */
386 typedef struct stats_aal0 {
387 __be32 cells_transmitted; /* cells transmitted */
388 __be32 cells_received; /* cells received */
389 __be32 cells_dropped; /* cells dropped */
390 __be32 pad[ 1 ]; /* i960 padding */
394 /* AAL3/4 statistics */
396 typedef struct stats_aal34 {
397 __be32 cells_transmitted; /* cells transmitted from segmented PDUs */
398 __be32 cells_received; /* cells reassembled into PDUs */
399 __be32 cells_crc_errors; /* payload CRC error count */
400 __be32 cells_protocol_errors; /* SAR or CS layer protocol errors */
401 __be32 cells_dropped; /* cells dropped: partial reassembly */
402 __be32 cspdus_transmitted; /* CS PDUs transmitted */
403 __be32 cspdus_received; /* CS PDUs received */
404 __be32 cspdus_protocol_errors; /* CS layer protocol errors */
405 __be32 cspdus_dropped; /* reassembled PDUs drop'd (in cells) */
406 __be32 pad[ 3 ]; /* i960 padding */
410 /* AAL5 statistics */
412 typedef struct stats_aal5 {
413 __be32 cells_transmitted; /* cells transmitted from segmented SDUs */
414 __be32 cells_received; /* cells reassembled into SDUs */
415 __be32 cells_dropped; /* reassembled PDUs dropped (in cells) */
416 __be32 congestion_experienced; /* CRC error and length wrong */
417 __be32 cspdus_transmitted; /* CS PDUs transmitted */
418 __be32 cspdus_received; /* CS PDUs received */
419 __be32 cspdus_crc_errors; /* CS PDUs CRC errors */
420 __be32 cspdus_protocol_errors; /* CS layer protocol errors */
421 __be32 cspdus_dropped; /* reassembled PDUs dropped */
422 __be32 pad[ 3 ]; /* i960 padding */
426 /* auxiliary statistics */
428 typedef struct stats_aux {
429 __be32 small_b1_failed; /* receive BD allocation failures */
430 __be32 large_b1_failed; /* receive BD allocation failures */
431 __be32 small_b2_failed; /* receive BD allocation failures */
432 __be32 large_b2_failed; /* receive BD allocation failures */
433 __be32 rpd_alloc_failed; /* receive PDU allocation failures */
434 __be32 receive_carrier; /* no carrier = 0, carrier = 1 */
435 __be32 pad[ 2 ]; /* i960 padding */
439 /* whole statistics buffer */
441 typedef struct stats {
442 struct stats_phy phy; /* physical encoding statistics */
443 struct stats_oc3 oc3; /* OC-3 statistics */
444 struct stats_atm atm; /* ATM statistics */
445 struct stats_aal0 aal0; /* AAL0 statistics */
446 struct stats_aal34 aal34; /* AAL3/4 statistics */
447 struct stats_aal5 aal5; /* AAL5 statistics */
448 struct stats_aux aux; /* auxiliary statistics */
452 /* get statistics command opcode */
454 typedef struct stats_opcode {
456 enum opcode opcode : 8, /* cp opcode */
457 u32 pad : 24 /* reserved */
462 /* get statistics command block */
464 typedef struct stats_block {
465 struct stats_opcode opcode; /* get statistics command opcode */
466 u32 stats_haddr; /* host DMA address of stats buffer */
470 /* expansion PROM data (PCI specific) */
472 typedef struct prom_data {
473 u32 hw_revision; /* hardware revision */
474 u32 serial_number; /* board serial number */
475 u8 mac_addr[ 8 ]; /* board MAC address */
479 /* get expansion PROM data command opcode */
481 typedef struct prom_opcode {
483 enum opcode opcode : 8, /* cp opcode */
484 u32 pad : 24 /* reserved */
489 /* get expansion PROM data command block */
491 typedef struct prom_block {
492 struct prom_opcode opcode; /* get PROM data command opcode */
493 u32 prom_haddr; /* host DMA address of PROM buffer */
500 enum opcode opcode; /* operation code */
501 struct activate_block activate_block; /* activate VC */
502 struct deactivate_block deactivate_block; /* deactivate VC */
503 struct stats_block stats_block; /* get statistics */
504 struct prom_block prom_block; /* get expansion PROM data */
505 struct oc3_block oc3_block; /* get/set OC-3 registers */
506 u32 pad[ 4 ]; /* i960 padding */
510 /* cp resident command queue */
512 typedef struct cp_cmdq_entry {
513 union cmd cmd; /* command */
514 u32 status_haddr; /* host DMA address of completion status */
515 u32 pad[ 3 ]; /* i960 padding */
519 /* host resident transmit queue entry */
521 typedef struct host_txq_entry {
522 struct cp_txq_entry __iomem *cp_entry; /* addr of cp resident tx queue entry */
523 enum status* status; /* addr of host resident status */
524 struct tpd* tpd; /* addr of transmit PDU descriptor */
525 u32 tpd_dma; /* DMA address of tpd */
526 struct sk_buff* skb; /* related skb */
527 void* data; /* copy of misaligned data */
528 unsigned long incarn; /* vc_map incarnation when submitted for tx */
529 struct fore200e_vc_map* vc_map;
534 /* host resident receive queue entry */
536 typedef struct host_rxq_entry {
537 struct cp_rxq_entry __iomem *cp_entry; /* addr of cp resident rx queue entry */
538 enum status* status; /* addr of host resident status */
539 struct rpd* rpd; /* addr of receive PDU descriptor */
540 u32 rpd_dma; /* DMA address of rpd */
544 /* host resident buffer supply queue entry */
546 typedef struct host_bsq_entry {
547 struct cp_bsq_entry __iomem *cp_entry; /* addr of cp resident buffer supply queue entry */
548 enum status* status; /* addr of host resident status */
549 struct rbd_block* rbd_block; /* addr of receive buffer descriptor block */
550 u32 rbd_block_dma; /* DMA address od rdb */
554 /* host resident command queue entry */
556 typedef struct host_cmdq_entry {
557 struct cp_cmdq_entry __iomem *cp_entry; /* addr of cp resident cmd queue entry */
558 enum status *status; /* addr of host resident status */
562 /* chunk of memory */
564 typedef struct chunk {
565 void* alloc_addr; /* base address of allocated chunk */
566 void* align_addr; /* base address of aligned chunk */
567 dma_addr_t dma_addr; /* DMA address of aligned chunk */
568 int direction; /* direction of DMA mapping */
569 u32 alloc_size; /* length of allocated chunk */
570 u32 align_size; /* length of aligned chunk */
573 #define dma_size align_size /* DMA useable size */
576 /* host resident receive buffer */
578 typedef struct buffer {
579 struct buffer* next; /* next receive buffer */
580 enum buffer_scheme scheme; /* buffer scheme */
581 enum buffer_magn magn; /* buffer magnitude */
582 struct chunk data; /* data buffer */
583 #ifdef FORE200E_BSQ_DEBUG
584 unsigned long index; /* buffer # in queue */
585 int supplied; /* 'buffer supplied' flag */
590 #if (BITS_PER_LONG == 32)
591 #define FORE200E_BUF2HDL(buffer) ((u32)(buffer))
592 #define FORE200E_HDL2BUF(handle) ((struct buffer*)(handle))
593 #else /* deal with 64 bit pointers */
594 #define FORE200E_BUF2HDL(buffer) ((u32)((u64)(buffer)))
595 #define FORE200E_HDL2BUF(handle) ((struct buffer*)(((u64)(handle)) | PAGE_OFFSET))
599 /* host resident command queue */
601 typedef struct host_cmdq {
602 struct host_cmdq_entry host_entry[ QUEUE_SIZE_CMD ]; /* host resident cmd queue entries */
603 int head; /* head of cmd queue */
604 struct chunk status; /* array of completion status */
608 /* host resident transmit queue */
610 typedef struct host_txq {
611 struct host_txq_entry host_entry[ QUEUE_SIZE_TX ]; /* host resident tx queue entries */
612 int head; /* head of tx queue */
613 int tail; /* tail of tx queue */
614 struct chunk tpd; /* array of tpds */
615 struct chunk status; /* arry of completion status */
616 int txing; /* number of pending PDUs in tx queue */
620 /* host resident receive queue */
622 typedef struct host_rxq {
623 struct host_rxq_entry host_entry[ QUEUE_SIZE_RX ]; /* host resident rx queue entries */
624 int head; /* head of rx queue */
625 struct chunk rpd; /* array of rpds */
626 struct chunk status; /* array of completion status */
630 /* host resident buffer supply queues */
632 typedef struct host_bsq {
633 struct host_bsq_entry host_entry[ QUEUE_SIZE_BS ]; /* host resident buffer supply queue entries */
634 int head; /* head of buffer supply queue */
635 struct chunk rbd_block; /* array of rbds */
636 struct chunk status; /* array of completion status */
637 struct buffer* buffer; /* array of rx buffers */
638 struct buffer* freebuf; /* list of free rx buffers */
639 volatile int freebuf_count; /* count of free rx buffers */
643 /* header of the firmware image */
645 typedef struct fw_header {
646 __le32 magic; /* magic number */
647 __le32 version; /* firmware version id */
648 __le32 load_offset; /* fw load offset in board memory */
649 __le32 start_offset; /* fw execution start address in board memory */
652 #define FW_HEADER_MAGIC 0x65726f66 /* 'fore' */
655 /* receive buffer supply queues scheme specification */
657 typedef struct bs_spec {
658 u32 queue_length; /* queue capacity */
659 u32 buffer_size; /* host buffer size */
660 u32 pool_size; /* number of rbds */
661 u32 supply_blksize; /* num of rbds in I/O block (multiple
662 of 4 between 4 and 124 inclusive) */
666 /* initialization command block (one-time command, not in cmd queue) */
668 typedef struct init_block {
669 enum opcode opcode; /* initialize command */
670 enum status status; /* related status word */
671 u32 receive_threshold; /* not used */
672 u32 num_connect; /* ATM connections */
673 u32 cmd_queue_len; /* length of command queue */
674 u32 tx_queue_len; /* length of transmit queue */
675 u32 rx_queue_len; /* length of receive queue */
676 u32 rsd_extension; /* number of extra 32 byte blocks */
677 u32 tsd_extension; /* number of extra 32 byte blocks */
678 u32 conless_vpvc; /* not used */
679 u32 pad[ 2 ]; /* force quad alignment */
680 struct bs_spec bs_spec[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues spec */
684 typedef enum media_type {
685 MEDIA_TYPE_CAT5_UTP = 0x06, /* unshielded twisted pair */
686 MEDIA_TYPE_MM_OC3_ST = 0x16, /* multimode fiber ST */
687 MEDIA_TYPE_MM_OC3_SC = 0x26, /* multimode fiber SC */
688 MEDIA_TYPE_SM_OC3_ST = 0x36, /* single-mode fiber ST */
689 MEDIA_TYPE_SM_OC3_SC = 0x46 /* single-mode fiber SC */
692 #define FORE200E_MEDIA_INDEX(media_type) ((media_type)>>4)
695 /* cp resident queues */
697 typedef struct cp_queues {
698 u32 cp_cmdq; /* command queue */
699 u32 cp_txq; /* transmit queue */
700 u32 cp_rxq; /* receive queue */
701 u32 cp_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues */
702 u32 imask; /* 1 enables cp to host interrupts */
703 u32 istat; /* 1 for interrupt posted */
704 u32 heap_base; /* offset form beginning of ram */
705 u32 heap_size; /* space available for queues */
706 u32 hlogger; /* non zero for host logging */
707 u32 heartbeat; /* cp heartbeat */
708 u32 fw_release; /* firmware version */
709 u32 mon960_release; /* i960 monitor version */
710 u32 tq_plen; /* transmit throughput measurements */
711 /* make sure the init block remains on a quad word boundary */
712 struct init_block init; /* one time cmd, not in cmd queue */
713 enum media_type media_type; /* media type id */
714 u32 oc3_revision; /* OC-3 revision number */
720 typedef enum boot_status {
721 BSTAT_COLD_START = (u32) 0xc01dc01d, /* cold start */
722 BSTAT_SELFTEST_OK = (u32) 0x02201958, /* self-test ok */
723 BSTAT_SELFTEST_FAIL = (u32) 0xadbadbad, /* self-test failed */
724 BSTAT_CP_RUNNING = (u32) 0xce11feed, /* cp is running */
725 BSTAT_MON_TOO_BIG = (u32) 0x10aded00 /* i960 monitor is too big */
731 typedef struct soft_uart {
732 u32 send; /* write register */
733 u32 recv; /* read register */
736 #define FORE200E_CP_MONITOR_UART_FREE 0x00000000
737 #define FORE200E_CP_MONITOR_UART_AVAIL 0x01000000
742 typedef struct cp_monitor {
743 struct soft_uart soft_uart; /* software UART */
744 enum boot_status bstat; /* boot status */
745 u32 app_base; /* application base offset */
746 u32 mon_version; /* i960 monitor version */
752 typedef enum fore200e_state {
753 FORE200E_STATE_BLANK, /* initial state */
754 FORE200E_STATE_REGISTER, /* device registered */
755 FORE200E_STATE_CONFIGURE, /* bus interface configured */
756 FORE200E_STATE_MAP, /* board space mapped in host memory */
757 FORE200E_STATE_RESET, /* board resetted */
758 FORE200E_STATE_START_FW, /* firmware started */
759 FORE200E_STATE_INITIALIZE, /* initialize command successful */
760 FORE200E_STATE_INIT_CMDQ, /* command queue initialized */
761 FORE200E_STATE_INIT_TXQ, /* transmit queue initialized */
762 FORE200E_STATE_INIT_RXQ, /* receive queue initialized */
763 FORE200E_STATE_INIT_BSQ, /* buffer supply queue initialized */
764 FORE200E_STATE_ALLOC_BUF, /* receive buffers allocated */
765 FORE200E_STATE_IRQ, /* host interrupt requested */
766 FORE200E_STATE_COMPLETE /* initialization completed */
770 /* PCA-200E registers */
772 typedef struct fore200e_pca_regs {
773 volatile u32 __iomem * hcr; /* address of host control register */
774 volatile u32 __iomem * imr; /* address of host interrupt mask register */
775 volatile u32 __iomem * psr; /* address of PCI specific register */
776 } fore200e_pca_regs_t;
779 /* SBA-200E registers */
781 typedef struct fore200e_sba_regs {
782 u32 __iomem *hcr; /* address of host control register */
783 u32 __iomem *bsr; /* address of burst transfer size register */
784 u32 __iomem *isr; /* address of interrupt level selection register */
785 } fore200e_sba_regs_t;
788 /* model-specific registers */
790 typedef union fore200e_regs {
791 struct fore200e_pca_regs pca; /* PCA-200E registers */
792 struct fore200e_sba_regs sba; /* SBA-200E registers */
798 /* bus-dependent data */
800 typedef struct fore200e_bus {
801 char* model_name; /* board model name */
802 char* proc_name; /* board name under /proc/atm */
803 int descr_alignment; /* tpd/rpd/rbd DMA alignment requirement */
804 int buffer_alignment; /* rx buffers DMA alignment requirement */
805 int status_alignment; /* status words DMA alignment requirement */
806 u32 (*read)(volatile u32 __iomem *);
807 void (*write)(u32, volatile u32 __iomem *);
808 int (*configure)(struct fore200e*);
809 int (*map)(struct fore200e*);
810 void (*reset)(struct fore200e*);
811 int (*prom_read)(struct fore200e*, struct prom_data*);
812 void (*unmap)(struct fore200e*);
813 void (*irq_enable)(struct fore200e*);
814 int (*irq_check)(struct fore200e*);
815 void (*irq_ack)(struct fore200e*);
816 int (*proc_read)(struct fore200e*, char*);
821 typedef struct fore200e_vc_map {
822 struct atm_vcc* vcc; /* vcc entry */
823 unsigned long incarn; /* vcc incarnation number */
826 #define FORE200E_VC_MAP(fore200e, vpi, vci) \
827 (& (fore200e)->vc_map[ ((vpi) << FORE200E_VCI_BITS) | (vci) ])
830 /* per-device data */
832 typedef struct fore200e {
833 struct list_head entry; /* next device */
834 const struct fore200e_bus* bus; /* bus-dependent code and data */
835 union fore200e_regs regs; /* bus-dependent registers */
836 struct atm_dev* atm_dev; /* ATM device */
838 enum fore200e_state state; /* device state */
840 char name[16]; /* device name */
842 int irq; /* irq number */
843 unsigned long phys_base; /* physical base address */
844 void __iomem * virt_base; /* virtual base address */
846 unsigned char esi[ ESI_LEN ]; /* end system identifier */
848 struct cp_monitor __iomem * cp_monitor; /* i960 monitor address */
849 struct cp_queues __iomem * cp_queues; /* cp resident queues */
850 struct host_cmdq host_cmdq; /* host resident cmd queue */
851 struct host_txq host_txq; /* host resident tx queue */
852 struct host_rxq host_rxq; /* host resident rx queue */
853 /* host resident buffer supply queues */
854 struct host_bsq host_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ];
856 u32 available_cell_rate; /* remaining pseudo-CBR bw on link */
858 int loop_mode; /* S/UNI loopback mode */
860 struct stats* stats; /* last snapshot of the stats */
862 struct mutex rate_mtx; /* protects rate reservation ops */
863 spinlock_t q_lock; /* protects queue ops */
864 #ifdef FORE200E_USE_TASKLET
865 struct tasklet_struct tx_tasklet; /* performs tx interrupt work */
866 struct tasklet_struct rx_tasklet; /* performs rx interrupt work */
868 unsigned long tx_sat; /* tx queue saturation count */
870 unsigned long incarn_count;
871 struct fore200e_vc_map vc_map[ NBR_CONNECT ]; /* vc mapping */
877 typedef struct fore200e_vcc {
878 enum buffer_scheme scheme; /* rx buffer scheme */
879 struct tpd_rate rate; /* tx rate control data */
880 int rx_min_pdu; /* size of smallest PDU received */
881 int rx_max_pdu; /* size of largest PDU received */
882 int tx_min_pdu; /* size of smallest PDU transmitted */
883 int tx_max_pdu; /* size of largest PDU transmitted */
884 unsigned long tx_pdu; /* nbr of tx pdus */
885 unsigned long rx_pdu; /* nbr of rx pdus */
890 /* 200E-series common memory layout */
892 #define FORE200E_CP_MONITOR_OFFSET 0x00000400 /* i960 monitor interface */
893 #define FORE200E_CP_QUEUES_OFFSET 0x00004d40 /* cp resident queues */
896 /* PCA-200E memory layout */
898 #define PCA200E_IOSPACE_LENGTH 0x00200000
900 #define PCA200E_HCR_OFFSET 0x00100000 /* board control register */
901 #define PCA200E_IMR_OFFSET 0x00100004 /* host IRQ mask register */
902 #define PCA200E_PSR_OFFSET 0x00100008 /* PCI specific register */
905 /* PCA-200E host control register */
907 #define PCA200E_HCR_RESET (1<<0) /* read / write */
908 #define PCA200E_HCR_HOLD_LOCK (1<<1) /* read / write */
909 #define PCA200E_HCR_I960FAIL (1<<2) /* read */
910 #define PCA200E_HCR_INTRB (1<<2) /* write */
911 #define PCA200E_HCR_HOLD_ACK (1<<3) /* read */
912 #define PCA200E_HCR_INTRA (1<<3) /* write */
913 #define PCA200E_HCR_OUTFULL (1<<4) /* read */
914 #define PCA200E_HCR_CLRINTR (1<<4) /* write */
915 #define PCA200E_HCR_ESPHOLD (1<<5) /* read */
916 #define PCA200E_HCR_INFULL (1<<6) /* read */
917 #define PCA200E_HCR_TESTMODE (1<<7) /* read */
920 /* PCA-200E PCI bus interface regs (offsets in PCI config space) */
922 #define PCA200E_PCI_LATENCY 0x40 /* maximum slave latenty */
923 #define PCA200E_PCI_MASTER_CTRL 0x41 /* master control */
924 #define PCA200E_PCI_THRESHOLD 0x42 /* burst / continuous req threshold */
926 /* PBI master control register */
928 #define PCA200E_CTRL_DIS_CACHE_RD (1<<0) /* disable cache-line reads */
929 #define PCA200E_CTRL_DIS_WRT_INVAL (1<<1) /* disable writes and invalidates */
930 #define PCA200E_CTRL_2_CACHE_WRT_INVAL (1<<2) /* require 2 cache-lines for writes and invalidates */
931 #define PCA200E_CTRL_IGN_LAT_TIMER (1<<3) /* ignore the latency timer */
932 #define PCA200E_CTRL_ENA_CONT_REQ_MODE (1<<4) /* enable continuous request mode */
933 #define PCA200E_CTRL_LARGE_PCI_BURSTS (1<<5) /* force large PCI bus bursts */
934 #define PCA200E_CTRL_CONVERT_ENDIAN (1<<6) /* convert endianess of slave RAM accesses */
938 #define SBA200E_PROM_NAME "FORE,sba-200e" /* device name in openprom tree */
941 /* size of SBA-200E registers */
943 #define SBA200E_HCR_LENGTH 4
944 #define SBA200E_BSR_LENGTH 4
945 #define SBA200E_ISR_LENGTH 4
946 #define SBA200E_RAM_LENGTH 0x40000
949 /* SBA-200E SBUS burst transfer size register */
951 #define SBA200E_BSR_BURST4 0x04
952 #define SBA200E_BSR_BURST8 0x08
953 #define SBA200E_BSR_BURST16 0x10
956 /* SBA-200E host control register */
958 #define SBA200E_HCR_RESET (1<<0) /* read / write (sticky) */
959 #define SBA200E_HCR_HOLD_LOCK (1<<1) /* read / write (sticky) */
960 #define SBA200E_HCR_I960FAIL (1<<2) /* read */
961 #define SBA200E_HCR_I960SETINTR (1<<2) /* write */
962 #define SBA200E_HCR_OUTFULL (1<<3) /* read */
963 #define SBA200E_HCR_INTR_CLR (1<<3) /* write */
964 #define SBA200E_HCR_INTR_ENA (1<<4) /* read / write (sticky) */
965 #define SBA200E_HCR_ESPHOLD (1<<5) /* read */
966 #define SBA200E_HCR_INFULL (1<<6) /* read */
967 #define SBA200E_HCR_TESTMODE (1<<7) /* read */
968 #define SBA200E_HCR_INTR_REQ (1<<8) /* read */
970 #define SBA200E_HCR_STICKY (SBA200E_HCR_RESET | SBA200E_HCR_HOLD_LOCK | SBA200E_HCR_INTR_ENA)
973 #endif /* __KERNEL__ */
974 #endif /* _FORE200E_H */