drivers/acpi/sleep.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18 #include <linux/reboot.h>
  19 #include <linux/acpi.h>
  20 #include <linux/module.h>
  21
  22 #include <asm/io.h>
  23
  24 #include <acpi/acpi_bus.h>
  25 #include <acpi/acpi_drivers.h>
  26
  27 #include "internal.h"
  28 #include "sleep.h"
  29
  30 static u8 sleep_states[ACPI_S_STATE_COUNT];
  31
  32 static void acpi_sleep_tts_switch(u32 acpi_state)
  33 {
  34         union acpi_object in_arg = { ACPI_TYPE_INTEGER };
  35         struct acpi_object_list arg_list = { 1, &in_arg };
  36         acpi_status status = AE_OK;
  37
  38         in_arg.integer.value = acpi_state;
  39         status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
  40         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
  41                 /*
  42                  * OS can't evaluate the _TTS object correctly. Some warning
  43                  * message will be printed. But it won't break anything.
  44                  */
  45                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
  46         }
  47 }
  48
  49 static int tts_notify_reboot(struct notifier_block *this,
  50                         unsigned long code, void *x)
  51 {
  52         acpi_sleep_tts_switch(ACPI_STATE_S5);
  53         return NOTIFY_DONE;
  54 }
  55
  56 static struct notifier_block tts_notifier = {
  57         .notifier_call  = tts_notify_reboot,
  58         .next           = NULL,
  59         .priority       = 0,
  60 };
  61
  62 static int acpi_sleep_prepare(u32 acpi_state)
  63 {
  64 #ifdef CONFIG_ACPI_SLEEP
  65         /* do we have a wakeup address for S2 and S3? */
  66         if (acpi_state == ACPI_STATE_S3) {
  67                 if (!acpi_wakeup_address)
  68                         return -EFAULT;
  69                 acpi_set_firmware_waking_vector(acpi_wakeup_address);
  70
  71         }
  72         ACPI_FLUSH_CPU_CACHE();
  73 #endif
  74         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
  75                 acpi_state);
  76         acpi_enable_wakeup_devices(acpi_state);
  77         acpi_enter_sleep_state_prep(acpi_state);
  78         return 0;
  79 }
  80
  81 #ifdef CONFIG_ACPI_SLEEP
  82 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
  83
  84 u32 acpi_target_system_state(void)
  85 {
  86         return acpi_target_sleep_state;
  87 }
  88
  89 static bool pwr_btn_event_pending;
  90
  91 /*
  92  * The ACPI specification wants us to save NVS memory regions during hibernation
  93  * and to restore them during the subsequent resume.  Windows does that also for
  94  * suspend to RAM.  However, it is known that this mechanism does not work on
  95  * all machines, so we allow the user to disable it with the help of the
  96  * 'acpi_sleep=nonvs' kernel command line option.
  97  */
  98 static bool nvs_nosave;
  99
 100 void __init acpi_nvs_nosave(void)
 101 {
 102         nvs_nosave = true;
 103 }
 104
 105 /*
 106  * The ACPI specification wants us to save NVS memory regions during hibernation
 107  * but says nothing about saving NVS during S3.  Not all versions of Windows
 108  * save NVS on S3 suspend either, and it is clear that not all systems need
 109  * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
 110  * user to disable saving NVS on S3 if their system does not require it, but
 111  * continue to save/restore NVS for S4 as specified.
 112  */
 113 static bool nvs_nosave_s3;
 114
 115 void __init acpi_nvs_nosave_s3(void)
 116 {
 117         nvs_nosave_s3 = true;
 118 }
 119
 120 /*
 121  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 122  * user to request that behavior by using the 'acpi_old_suspend_ordering'
 123  * kernel command line option that causes the following variable to be set.
 124  */
 125 static bool old_suspend_ordering;
 126
 127 void __init acpi_old_suspend_ordering(void)
 128 {
 129         old_suspend_ordering = true;
 130 }
 131
 132 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 133 {
 134         acpi_old_suspend_ordering();
 135         return 0;
 136 }
 137
 138 static int __init init_nvs_nosave(const struct dmi_system_id *d)
 139 {
 140         acpi_nvs_nosave();
 141         return 0;
 142 }
 143
 144 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 145         {
 146         .callback = init_old_suspend_ordering,
 147         .ident = "Abit KN9 (nForce4 variant)",
 148         .matches = {
 149                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
 150                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 151                 },
 152         },
 153         {
 154         .callback = init_old_suspend_ordering,
 155         .ident = "HP xw4600 Workstation",
 156         .matches = {
 157                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 158                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 159                 },
 160         },
 161         {
 162         .callback = init_old_suspend_ordering,
 163         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
 164         .matches = {
 165                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
 166                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
 167                 },
 168         },
 169         {
 170         .callback = init_old_suspend_ordering,
 171         .ident = "Panasonic CF51-2L",
 172         .matches = {
 173                 DMI_MATCH(DMI_BOARD_VENDOR,
 174                                 "Matsushita Electric Industrial Co.,Ltd."),
 175                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 176                 },
 177         },
 178         {
 179         .callback = init_nvs_nosave,
 180         .ident = "Sony Vaio VGN-FW41E_H",
 181         .matches = {
 182                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 183                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
 184                 },
 185         },
 186         {
 187         .callback = init_nvs_nosave,
 188         .ident = "Sony Vaio VGN-FW21E",
 189         .matches = {
 190                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 191                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
 192                 },
 193         },
 194         {
 195         .callback = init_nvs_nosave,
 196         .ident = "Sony Vaio VGN-FW21M",
 197         .matches = {
 198                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 199                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
 200                 },
 201         },
 202         {
 203         .callback = init_nvs_nosave,
 204         .ident = "Sony Vaio VPCEB17FX",
 205         .matches = {
 206                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 207                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
 208                 },
 209         },
 210         {
 211         .callback = init_nvs_nosave,
 212         .ident = "Sony Vaio VGN-SR11M",
 213         .matches = {
 214                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 215                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
 216                 },
 217         },
 218         {
 219         .callback = init_nvs_nosave,
 220         .ident = "Everex StepNote Series",
 221         .matches = {
 222                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
 223                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
 224                 },
 225         },
 226         {
 227         .callback = init_nvs_nosave,
 228         .ident = "Sony Vaio VPCEB1Z1E",
 229         .matches = {
 230                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 231                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 232                 },
 233         },
 234         {
 235         .callback = init_nvs_nosave,
 236         .ident = "Sony Vaio VGN-NW130D",
 237         .matches = {
 238                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 239                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
 240                 },
 241         },
 242         {
 243         .callback = init_nvs_nosave,
 244         .ident = "Sony Vaio VPCCW29FX",
 245         .matches = {
 246                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 247                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
 248                 },
 249         },
 250         {
 251         .callback = init_nvs_nosave,
 252         .ident = "Averatec AV1020-ED2",
 253         .matches = {
 254                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
 255                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 256                 },
 257         },
 258         {
 259         .callback = init_old_suspend_ordering,
 260         .ident = "Asus A8N-SLI DELUXE",
 261         .matches = {
 262                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 263                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
 264                 },
 265         },
 266         {
 267         .callback = init_old_suspend_ordering,
 268         .ident = "Asus A8N-SLI Premium",
 269         .matches = {
 270                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 271                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
 272                 },
 273         },
 274         {
 275         .callback = init_nvs_nosave,
 276         .ident = "Sony Vaio VGN-SR26GN_P",
 277         .matches = {
 278                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 279                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
 280                 },
 281         },
 282         {
 283         .callback = init_nvs_nosave,
 284         .ident = "Sony Vaio VPCEB1S1E",
 285         .matches = {
 286                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 287                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
 288                 },
 289         },
 290         {
 291         .callback = init_nvs_nosave,
 292         .ident = "Sony Vaio VGN-FW520F",
 293         .matches = {
 294                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 295                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
 296                 },
 297         },
 298         {
 299         .callback = init_nvs_nosave,
 300         .ident = "Asus K54C",
 301         .matches = {
 302                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 303                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
 304                 },
 305         },
 306         {
 307         .callback = init_nvs_nosave,
 308         .ident = "Asus K54HR",
 309         .matches = {
 310                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 311                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 312                 },
 313         },
 314         {},
 315 };
 316
 317 static void acpi_sleep_dmi_check(void)
 318 {
 319         dmi_check_system(acpisleep_dmi_table);
 320 }
 321
 322 /**
 323  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 324  */
 325 static int acpi_pm_freeze(void)
 326 {
 327         acpi_disable_all_gpes();
 328         acpi_os_wait_events_complete();
 329         acpi_ec_block_transactions();
 330         return 0;
 331 }
 332
 333 /**
 334  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 335  */
 336 static int acpi_pm_pre_suspend(void)
 337 {
 338         acpi_pm_freeze();
 339         return suspend_nvs_save();
 340 }
 341
 342 /**
 343  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 344  *
 345  *      If necessary, set the firmware waking vector and do arch-specific
 346  *      nastiness to get the wakeup code to the waking vector.
 347  */
 348 static int __acpi_pm_prepare(void)
 349 {
 350         int error = acpi_sleep_prepare(acpi_target_sleep_state);
 351         if (error)
 352                 acpi_target_sleep_state = ACPI_STATE_S0;
 353
 354         return error;
 355 }
 356
 357 /**
 358  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 359  *              state and disable the GPEs.
 360  */
 361 static int acpi_pm_prepare(void)
 362 {
 363         int error = __acpi_pm_prepare();
 364         if (!error)
 365                 error = acpi_pm_pre_suspend();
 366
 367         return error;
 368 }
 369
 370 static int find_powerf_dev(struct device *dev, void *data)
 371 {
 372         struct acpi_device *device = to_acpi_device(dev);
 373         const char *hid = acpi_device_hid(device);
 374
 375         return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
 376 }
 377
 378 /**
 379  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 380  *
 381  *      This is called after we wake back up (or if entering the sleep state
 382  *      failed).
 383  */
 384 static void acpi_pm_finish(void)
 385 {
 386         struct device *pwr_btn_dev;
 387         u32 acpi_state = acpi_target_sleep_state;
 388
 389         acpi_ec_unblock_transactions();
 390         suspend_nvs_free();
 391
 392         if (acpi_state == ACPI_STATE_S0)
 393                 return;
 394
 395         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
 396                 acpi_state);
 397         acpi_disable_wakeup_devices(acpi_state);
 398         acpi_leave_sleep_state(acpi_state);
 399
 400         /* reset firmware waking vector */
 401         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 402
 403         acpi_target_sleep_state = ACPI_STATE_S0;
 404
 405         acpi_resume_power_resources();
 406
 407         /* If we were woken with the fixed power button, provide a small
 408          * hint to userspace in the form of a wakeup event on the fixed power
 409          * button device (if it can be found).
 410          *
 411          * We delay the event generation til now, as the PM layer requires
 412          * timekeeping to be running before we generate events. */
 413         if (!pwr_btn_event_pending)
 414                 return;
 415
 416         pwr_btn_event_pending = false;
 417         pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
 418                                       find_powerf_dev);
 419         if (pwr_btn_dev) {
 420                 pm_wakeup_event(pwr_btn_dev, 0);
 421                 put_device(pwr_btn_dev);
 422         }
 423 }
 424
 425 /**
 426  *      acpi_pm_end - Finish up suspend sequence.
 427  */
 428 static void acpi_pm_end(void)
 429 {
 430         /*
 431          * This is necessary in case acpi_pm_finish() is not called during a
 432          * failing transition to a sleep state.
 433          */
 434         acpi_target_sleep_state = ACPI_STATE_S0;
 435         acpi_sleep_tts_switch(acpi_target_sleep_state);
 436 }
 437 #else /* !CONFIG_ACPI_SLEEP */
 438 #define acpi_target_sleep_state ACPI_STATE_S0
 439 static inline void acpi_sleep_dmi_check(void) {}
 440 #endif /* CONFIG_ACPI_SLEEP */
 441
 442 #ifdef CONFIG_SUSPEND
 443 static u32 acpi_suspend_states[] = {
 444         [PM_SUSPEND_ON] = ACPI_STATE_S0,
 445         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
 446         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
 447         [PM_SUSPEND_MAX] = ACPI_STATE_S5
 448 };
 449
 450 /**
 451  *      acpi_suspend_begin - Set the target system sleep state to the state
 452  *              associated with given @pm_state, if supported.
 453  */
 454 static int acpi_suspend_begin(suspend_state_t pm_state)
 455 {
 456         u32 acpi_state = acpi_suspend_states[pm_state];
 457         int error = 0;
 458
 459         error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
 460         if (error)
 461                 return error;
 462
 463         if (sleep_states[acpi_state]) {
 464                 acpi_target_sleep_state = acpi_state;
 465                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 466         } else {
 467                 printk(KERN_ERR "ACPI does not support this state: %d\n",
 468                         pm_state);
 469                 error = -ENOSYS;
 470         }
 471         return error;
 472 }
 473
 474 /**
 475  *      acpi_suspend_enter - Actually enter a sleep state.
 476  *      @pm_state: ignored
 477  *
 478  *      Flush caches and go to sleep. For STR we have to call arch-specific
 479  *      assembly, which in turn call acpi_enter_sleep_state().
 480  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 481  */
 482 static int acpi_suspend_enter(suspend_state_t pm_state)
 483 {
 484         acpi_status status = AE_OK;
 485         u32 acpi_state = acpi_target_sleep_state;
 486         int error;
 487
 488         ACPI_FLUSH_CPU_CACHE();
 489
 490         switch (acpi_state) {
 491         case ACPI_STATE_S1:
 492                 barrier();
 493                 status = acpi_enter_sleep_state(acpi_state);
 494                 break;
 495
 496         case ACPI_STATE_S3:
 497                 if (!acpi_suspend_lowlevel)
 498                         return -ENOSYS;
 499                 error = acpi_suspend_lowlevel();
 500                 if (error)
 501                         return error;
 502                 pr_info(PREFIX "Low-level resume complete\n");
 503                 break;
 504         }
 505
 506         /* This violates the spec but is required for bug compatibility. */
 507         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 508
 509         /* Reprogram control registers */
 510         acpi_leave_sleep_state_prep(acpi_state);
 511
 512         /* ACPI 3.0 specs (P62) says that it's the responsibility
 513          * of the OSPM to clear the status bit [ implying that the
 514          * POWER_BUTTON event should not reach userspace ]
 515          *
 516          * However, we do generate a small hint for userspace in the form of
 517          * a wakeup event. We flag this condition for now and generate the
 518          * event later, as we're currently too early in resume to be able to
 519          * generate wakeup events.
 520          */
 521         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
 522                 acpi_event_status pwr_btn_status;
 523
 524                 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
 525
 526                 if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
 527                         acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 528                         /* Flag for later */
 529                         pwr_btn_event_pending = true;
 530                 }
 531         }
 532
 533         /*
 534          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 535          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 536          * acpi_leave_sleep_state will reenable specific GPEs later
 537          */
 538         acpi_disable_all_gpes();
 539         /* Allow EC transactions to happen. */
 540         acpi_ec_unblock_transactions_early();
 541
 542         suspend_nvs_restore();
 543
 544         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 545 }
 546
 547 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 548 {
 549         u32 acpi_state;
 550
 551         switch (pm_state) {
 552         case PM_SUSPEND_ON:
 553         case PM_SUSPEND_STANDBY:
 554         case PM_SUSPEND_MEM:
 555                 acpi_state = acpi_suspend_states[pm_state];
 556
 557                 return sleep_states[acpi_state];
 558         default:
 559                 return 0;
 560         }
 561 }
 562
 563 static const struct platform_suspend_ops acpi_suspend_ops = {
 564         .valid = acpi_suspend_state_valid,
 565         .begin = acpi_suspend_begin,
 566         .prepare_late = acpi_pm_prepare,
 567         .enter = acpi_suspend_enter,
 568         .wake = acpi_pm_finish,
 569         .end = acpi_pm_end,
 570 };
 571
 572 /**
 573  *      acpi_suspend_begin_old - Set the target system sleep state to the
 574  *              state associated with given @pm_state, if supported, and
 575  *              execute the _PTS control method.  This function is used if the
 576  *              pre-ACPI 2.0 suspend ordering has been requested.
 577  */
 578 static int acpi_suspend_begin_old(suspend_state_t pm_state)
 579 {
 580         int error = acpi_suspend_begin(pm_state);
 581         if (!error)
 582                 error = __acpi_pm_prepare();
 583
 584         return error;
 585 }
 586
 587 /*
 588  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 589  * been requested.
 590  */
 591 static const struct platform_suspend_ops acpi_suspend_ops_old = {
 592         .valid = acpi_suspend_state_valid,
 593         .begin = acpi_suspend_begin_old,
 594         .prepare_late = acpi_pm_pre_suspend,
 595         .enter = acpi_suspend_enter,
 596         .wake = acpi_pm_finish,
 597         .end = acpi_pm_end,
 598         .recover = acpi_pm_finish,
 599 };
 600
 601 static void acpi_sleep_suspend_setup(void)
 602 {
 603         int i;
 604
 605         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 606                 acpi_status status;
 607                 u8 type_a, type_b;
 608
 609                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 610                 if (ACPI_SUCCESS(status)) {
 611                         sleep_states[i] = 1;
 612                 }
 613         }
 614
 615         suspend_set_ops(old_suspend_ordering ?
 616                 &acpi_suspend_ops_old : &acpi_suspend_ops);
 617 }
 618 #else /* !CONFIG_SUSPEND */
 619 static inline void acpi_sleep_suspend_setup(void) {}
 620 #endif /* !CONFIG_SUSPEND */
 621
 622 #ifdef CONFIG_HIBERNATION
 623 static unsigned long s4_hardware_signature;
 624 static struct acpi_table_facs *facs;
 625 static bool nosigcheck;
 626
 627 void __init acpi_no_s4_hw_signature(void)
 628 {
 629         nosigcheck = true;
 630 }
 631
 632 static int acpi_hibernation_begin(void)
 633 {
 634         int error;
 635
 636         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 637         if (!error) {
 638                 acpi_target_sleep_state = ACPI_STATE_S4;
 639                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 640         }
 641
 642         return error;
 643 }
 644
 645 static int acpi_hibernation_enter(void)
 646 {
 647         acpi_status status = AE_OK;
 648
 649         ACPI_FLUSH_CPU_CACHE();
 650
 651         /* This shouldn't return.  If it returns, we have a problem */
 652         status = acpi_enter_sleep_state(ACPI_STATE_S4);
 653         /* Reprogram control registers */
 654         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 655
 656         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 657 }
 658
 659 static void acpi_hibernation_leave(void)
 660 {
 661         /*
 662          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 663          * enable it here.
 664          */
 665         acpi_enable();
 666         /* Reprogram control registers */
 667         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 668         /* Check the hardware signature */
 669         if (facs && s4_hardware_signature != facs->hardware_signature) {
 670                 printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
 671                         "cannot resume!\n");
 672                 panic("ACPI S4 hardware signature mismatch");
 673         }
 674         /* Restore the NVS memory area */
 675         suspend_nvs_restore();
 676         /* Allow EC transactions to happen. */
 677         acpi_ec_unblock_transactions_early();
 678 }
 679
 680 static void acpi_pm_thaw(void)
 681 {
 682         acpi_ec_unblock_transactions();
 683         acpi_enable_all_runtime_gpes();
 684 }
 685
 686 static const struct platform_hibernation_ops acpi_hibernation_ops = {
 687         .begin = acpi_hibernation_begin,
 688         .end = acpi_pm_end,
 689         .pre_snapshot = acpi_pm_prepare,
 690         .finish = acpi_pm_finish,
 691         .prepare = acpi_pm_prepare,
 692         .enter = acpi_hibernation_enter,
 693         .leave = acpi_hibernation_leave,
 694         .pre_restore = acpi_pm_freeze,
 695         .restore_cleanup = acpi_pm_thaw,
 696 };
 697
 698 /**
 699  *      acpi_hibernation_begin_old - Set the target system sleep state to
 700  *              ACPI_STATE_S4 and execute the _PTS control method.  This
 701  *              function is used if the pre-ACPI 2.0 suspend ordering has been
 702  *              requested.
 703  */
 704 static int acpi_hibernation_begin_old(void)
 705 {
 706         int error;
 707         /*
 708          * The _TTS object should always be evaluated before the _PTS object.
 709          * When the old_suspended_ordering is true, the _PTS object is
 710          * evaluated in the acpi_sleep_prepare.
 711          */
 712         acpi_sleep_tts_switch(ACPI_STATE_S4);
 713
 714         error = acpi_sleep_prepare(ACPI_STATE_S4);
 715
 716         if (!error) {
 717                 if (!nvs_nosave)
 718                         error = suspend_nvs_alloc();
 719                 if (!error)
 720                         acpi_target_sleep_state = ACPI_STATE_S4;
 721         }
 722         return error;
 723 }
 724
 725 /*
 726  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 727  * been requested.
 728  */
 729 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
 730         .begin = acpi_hibernation_begin_old,
 731         .end = acpi_pm_end,
 732         .pre_snapshot = acpi_pm_pre_suspend,
 733         .prepare = acpi_pm_freeze,
 734         .finish = acpi_pm_finish,
 735         .enter = acpi_hibernation_enter,
 736         .leave = acpi_hibernation_leave,
 737         .pre_restore = acpi_pm_freeze,
 738         .restore_cleanup = acpi_pm_thaw,
 739         .recover = acpi_pm_finish,
 740 };
 741
 742 static void acpi_sleep_hibernate_setup(void)
 743 {
 744         acpi_status status;
 745         u8 type_a, type_b;
 746
 747         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 748         if (ACPI_FAILURE(status))
 749                 return;
 750
 751         hibernation_set_ops(old_suspend_ordering ?
 752                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
 753         sleep_states[ACPI_STATE_S4] = 1;
 754         if (nosigcheck)
 755                 return;
 756
 757         acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
 758         if (facs)
 759                 s4_hardware_signature = facs->hardware_signature;
 760 }
 761 #else /* !CONFIG_HIBERNATION */
 762 static inline void acpi_sleep_hibernate_setup(void) {}
 763 #endif /* !CONFIG_HIBERNATION */
 764
 765 int acpi_suspend(u32 acpi_state)
 766 {
 767         suspend_state_t states[] = {
 768                 [1] = PM_SUSPEND_STANDBY,
 769                 [3] = PM_SUSPEND_MEM,
 770                 [5] = PM_SUSPEND_MAX
 771         };
 772
 773         if (acpi_state < 6 && states[acpi_state])
 774                 return pm_suspend(states[acpi_state]);
 775         if (acpi_state == 4)
 776                 return hibernate();
 777         return -EINVAL;
 778 }
 779
 780 static void acpi_power_off_prepare(void)
 781 {
 782         /* Prepare to power off the system */
 783         acpi_sleep_prepare(ACPI_STATE_S5);
 784         acpi_disable_all_gpes();
 785 }
 786
 787 static void acpi_power_off(void)
 788 {
 789         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 790         printk(KERN_DEBUG "%s called\n", __func__);
 791         local_irq_disable();
 792         acpi_enter_sleep_state(ACPI_STATE_S5);
 793 }
 794
 795 int __init acpi_sleep_init(void)
 796 {
 797         acpi_status status;
 798         u8 type_a, type_b;
 799         char supported[ACPI_S_STATE_COUNT * 3 + 1];
 800         char *pos = supported;
 801         int i;
 802
 803         if (acpi_disabled)
 804                 return 0;
 805
 806         acpi_sleep_dmi_check();
 807
 808         sleep_states[ACPI_STATE_S0] = 1;
 809
 810         acpi_sleep_suspend_setup();
 811         acpi_sleep_hibernate_setup();
 812
 813         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 814         if (ACPI_SUCCESS(status)) {
 815                 sleep_states[ACPI_STATE_S5] = 1;
 816                 pm_power_off_prepare = acpi_power_off_prepare;
 817                 pm_power_off = acpi_power_off;
 818         }
 819
 820         supported[0] = 0;
 821         for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
 822                 if (sleep_states[i])
 823                         pos += sprintf(pos, " S%d", i);
 824         }
 825         pr_info(PREFIX "(supports%s)\n", supported);
 826
 827         /*
 828          * Register the tts_notifier to reboot notifier list so that the _TTS
 829          * object can also be evaluated when the system enters S5.
 830          */
 831         register_reboot_notifier(&tts_notifier);
 832         return 0;
 833 }