drivers/acpi/acpi_lpss.c

   1 /*
   2  * ACPI support for Intel Lynxpoint LPSS.
   3  *
   4  * Copyright (C) 2013, Intel Corporation
   5  * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
   6  *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/acpi.h>
  14 #include <linux/clkdev.h>
  15 #include <linux/clk-provider.h>
  16 #include <linux/err.h>
  17 #include <linux/io.h>
  18 #include <linux/mutex.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/platform_data/clk-lpss.h>
  21 #include <linux/platform_data/x86/pmc_atom.h>
  22 #include <linux/pm_domain.h>
  23 #include <linux/pm_runtime.h>
  24 #include <linux/delay.h>
  25
  26 #include "internal.h"
  27
  28 ACPI_MODULE_NAME("acpi_lpss");
  29
  30 #ifdef CONFIG_X86_INTEL_LPSS
  31
  32 #include <asm/cpu_device_id.h>
  33 #include <asm/intel-family.h>
  34 #include <asm/iosf_mbi.h>
  35
  36 #define LPSS_ADDR(desc) ((unsigned long)&desc)
  37
  38 #define LPSS_CLK_SIZE   0x04
  39 #define LPSS_LTR_SIZE   0x18
  40
  41 /* Offsets relative to LPSS_PRIVATE_OFFSET */
  42 #define LPSS_CLK_DIVIDER_DEF_MASK       (BIT(1) | BIT(16))
  43 #define LPSS_RESETS                     0x04
  44 #define LPSS_RESETS_RESET_FUNC          BIT(0)
  45 #define LPSS_RESETS_RESET_APB           BIT(1)
  46 #define LPSS_GENERAL                    0x08
  47 #define LPSS_GENERAL_LTR_MODE_SW        BIT(2)
  48 #define LPSS_GENERAL_UART_RTS_OVRD      BIT(3)
  49 #define LPSS_SW_LTR                     0x10
  50 #define LPSS_AUTO_LTR                   0x14
  51 #define LPSS_LTR_SNOOP_REQ              BIT(15)
  52 #define LPSS_LTR_SNOOP_MASK             0x0000FFFF
  53 #define LPSS_LTR_SNOOP_LAT_1US          0x800
  54 #define LPSS_LTR_SNOOP_LAT_32US         0xC00
  55 #define LPSS_LTR_SNOOP_LAT_SHIFT        5
  56 #define LPSS_LTR_SNOOP_LAT_CUTOFF       3000
  57 #define LPSS_LTR_MAX_VAL                0x3FF
  58 #define LPSS_TX_INT                     0x20
  59 #define LPSS_TX_INT_MASK                BIT(1)
  60
  61 #define LPSS_PRV_REG_COUNT              9
  62
  63 /* LPSS Flags */
  64 #define LPSS_CLK                        BIT(0)
  65 #define LPSS_CLK_GATE                   BIT(1)
  66 #define LPSS_CLK_DIVIDER                BIT(2)
  67 #define LPSS_LTR                        BIT(3)
  68 #define LPSS_SAVE_CTX                   BIT(4)
  69 #define LPSS_NO_D3_DELAY                BIT(5)
  70
  71 struct lpss_private_data;
  72
  73 struct lpss_device_desc {
  74         unsigned int flags;
  75         const char *clk_con_id;
  76         unsigned int prv_offset;
  77         size_t prv_size_override;
  78         struct property_entry *properties;
  79         void (*setup)(struct lpss_private_data *pdata);
  80 };
  81
  82 static const struct lpss_device_desc lpss_dma_desc = {
  83         .flags = LPSS_CLK,
  84 };
  85
  86 struct lpss_private_data {
  87         void __iomem *mmio_base;
  88         resource_size_t mmio_size;
  89         unsigned int fixed_clk_rate;
  90         struct clk *clk;
  91         const struct lpss_device_desc *dev_desc;
  92         u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
  93 };
  94
  95 /* LPSS run time quirks */
  96 static unsigned int lpss_quirks;
  97
  98 /*
  99  * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
 100  *
 101  * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
 102  * it can be powered off automatically whenever the last LPSS device goes down.
 103  * In case of no power any access to the DMA controller will hang the system.
 104  * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
 105  * well as on ASuS T100TA transformer.
 106  *
 107  * This quirk overrides power state of entire LPSS island to keep DMA powered
 108  * on whenever we have at least one other device in use.
 109  */
 110 #define LPSS_QUIRK_ALWAYS_POWER_ON      BIT(0)
 111
 112 /* UART Component Parameter Register */
 113 #define LPSS_UART_CPR                   0xF4
 114 #define LPSS_UART_CPR_AFCE              BIT(4)
 115
 116 static void lpss_uart_setup(struct lpss_private_data *pdata)
 117 {
 118         unsigned int offset;
 119         u32 val;
 120
 121         offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
 122         val = readl(pdata->mmio_base + offset);
 123         writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
 124
 125         val = readl(pdata->mmio_base + LPSS_UART_CPR);
 126         if (!(val & LPSS_UART_CPR_AFCE)) {
 127                 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
 128                 val = readl(pdata->mmio_base + offset);
 129                 val |= LPSS_GENERAL_UART_RTS_OVRD;
 130                 writel(val, pdata->mmio_base + offset);
 131         }
 132 }
 133
 134 static void lpss_deassert_reset(struct lpss_private_data *pdata)
 135 {
 136         unsigned int offset;
 137         u32 val;
 138
 139         offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
 140         val = readl(pdata->mmio_base + offset);
 141         val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
 142         writel(val, pdata->mmio_base + offset);
 143 }
 144
 145 #define LPSS_I2C_ENABLE                 0x6c
 146
 147 static void byt_i2c_setup(struct lpss_private_data *pdata)
 148 {
 149         lpss_deassert_reset(pdata);
 150
 151         if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
 152                 pdata->fixed_clk_rate = 133000000;
 153
 154         writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
 155 }
 156
 157 static const struct lpss_device_desc lpt_dev_desc = {
 158         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
 159         .prv_offset = 0x800,
 160 };
 161
 162 static const struct lpss_device_desc lpt_i2c_dev_desc = {
 163         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR,
 164         .prv_offset = 0x800,
 165 };
 166
 167 static struct property_entry uart_properties[] = {
 168         PROPERTY_ENTRY_U32("reg-io-width", 4),
 169         PROPERTY_ENTRY_U32("reg-shift", 2),
 170         PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
 171         { },
 172 };
 173
 174 static const struct lpss_device_desc lpt_uart_dev_desc = {
 175         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
 176         .clk_con_id = "baudclk",
 177         .prv_offset = 0x800,
 178         .setup = lpss_uart_setup,
 179         .properties = uart_properties,
 180 };
 181
 182 static const struct lpss_device_desc lpt_sdio_dev_desc = {
 183         .flags = LPSS_LTR,
 184         .prv_offset = 0x1000,
 185         .prv_size_override = 0x1018,
 186 };
 187
 188 static const struct lpss_device_desc byt_pwm_dev_desc = {
 189         .flags = LPSS_SAVE_CTX,
 190 };
 191
 192 static const struct lpss_device_desc bsw_pwm_dev_desc = {
 193         .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 194 };
 195
 196 static const struct lpss_device_desc byt_uart_dev_desc = {
 197         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 198         .clk_con_id = "baudclk",
 199         .prv_offset = 0x800,
 200         .setup = lpss_uart_setup,
 201         .properties = uart_properties,
 202 };
 203
 204 static const struct lpss_device_desc bsw_uart_dev_desc = {
 205         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 206                         | LPSS_NO_D3_DELAY,
 207         .clk_con_id = "baudclk",
 208         .prv_offset = 0x800,
 209         .setup = lpss_uart_setup,
 210         .properties = uart_properties,
 211 };
 212
 213 static const struct lpss_device_desc byt_spi_dev_desc = {
 214         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 215         .prv_offset = 0x400,
 216 };
 217
 218 static const struct lpss_device_desc byt_sdio_dev_desc = {
 219         .flags = LPSS_CLK,
 220 };
 221
 222 static const struct lpss_device_desc byt_i2c_dev_desc = {
 223         .flags = LPSS_CLK | LPSS_SAVE_CTX,
 224         .prv_offset = 0x800,
 225         .setup = byt_i2c_setup,
 226 };
 227
 228 static const struct lpss_device_desc bsw_i2c_dev_desc = {
 229         .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 230         .prv_offset = 0x800,
 231         .setup = byt_i2c_setup,
 232 };
 233
 234 static const struct lpss_device_desc bsw_spi_dev_desc = {
 235         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 236                         | LPSS_NO_D3_DELAY,
 237         .prv_offset = 0x400,
 238         .setup = lpss_deassert_reset,
 239 };
 240
 241 #define ICPU(model)     { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
 242
 243 static const struct x86_cpu_id lpss_cpu_ids[] = {
 244         ICPU(INTEL_FAM6_ATOM_SILVERMONT1),      /* Valleyview, Bay Trail */
 245         ICPU(INTEL_FAM6_ATOM_AIRMONT),  /* Braswell, Cherry Trail */
 246         {}
 247 };
 248
 249 #else
 250
 251 #define LPSS_ADDR(desc) (0UL)
 252
 253 #endif /* CONFIG_X86_INTEL_LPSS */
 254
 255 static const struct acpi_device_id acpi_lpss_device_ids[] = {
 256         /* Generic LPSS devices */
 257         { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
 258
 259         /* Lynxpoint LPSS devices */
 260         { "INT33C0", LPSS_ADDR(lpt_dev_desc) },
 261         { "INT33C1", LPSS_ADDR(lpt_dev_desc) },
 262         { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
 263         { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
 264         { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
 265         { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
 266         { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
 267         { "INT33C7", },
 268
 269         /* BayTrail LPSS devices */
 270         { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
 271         { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
 272         { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
 273         { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
 274         { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
 275         { "INT33B2", },
 276         { "INT33FC", },
 277
 278         /* Braswell LPSS devices */
 279         { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
 280         { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
 281         { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
 282         { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
 283
 284         /* Broadwell LPSS devices */
 285         { "INT3430", LPSS_ADDR(lpt_dev_desc) },
 286         { "INT3431", LPSS_ADDR(lpt_dev_desc) },
 287         { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
 288         { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
 289         { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
 290         { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
 291         { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
 292         { "INT3437", },
 293
 294         /* Wildcat Point LPSS devices */
 295         { "INT3438", LPSS_ADDR(lpt_dev_desc) },
 296
 297         { }
 298 };
 299
 300 #ifdef CONFIG_X86_INTEL_LPSS
 301
 302 static int is_memory(struct acpi_resource *res, void *not_used)
 303 {
 304         struct resource r;
 305         return !acpi_dev_resource_memory(res, &r);
 306 }
 307
 308 /* LPSS main clock device. */
 309 static struct platform_device *lpss_clk_dev;
 310
 311 static inline void lpt_register_clock_device(void)
 312 {
 313         lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
 314 }
 315
 316 static int register_device_clock(struct acpi_device *adev,
 317                                  struct lpss_private_data *pdata)
 318 {
 319         const struct lpss_device_desc *dev_desc = pdata->dev_desc;
 320         const char *devname = dev_name(&adev->dev);
 321         struct clk *clk = ERR_PTR(-ENODEV);
 322         struct lpss_clk_data *clk_data;
 323         const char *parent, *clk_name;
 324         void __iomem *prv_base;
 325
 326         if (!lpss_clk_dev)
 327                 lpt_register_clock_device();
 328
 329         clk_data = platform_get_drvdata(lpss_clk_dev);
 330         if (!clk_data)
 331                 return -ENODEV;
 332         clk = clk_data->clk;
 333
 334         if (!pdata->mmio_base
 335             || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 336                 return -ENODATA;
 337
 338         parent = clk_data->name;
 339         prv_base = pdata->mmio_base + dev_desc->prv_offset;
 340
 341         if (pdata->fixed_clk_rate) {
 342                 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
 343                                               pdata->fixed_clk_rate);
 344                 goto out;
 345         }
 346
 347         if (dev_desc->flags & LPSS_CLK_GATE) {
 348                 clk = clk_register_gate(NULL, devname, parent, 0,
 349                                         prv_base, 0, 0, NULL);
 350                 parent = devname;
 351         }
 352
 353         if (dev_desc->flags & LPSS_CLK_DIVIDER) {
 354                 /* Prevent division by zero */
 355                 if (!readl(prv_base))
 356                         writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
 357
 358                 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
 359                 if (!clk_name)
 360                         return -ENOMEM;
 361                 clk = clk_register_fractional_divider(NULL, clk_name, parent,
 362                                                       0, prv_base,
 363                                                       1, 15, 16, 15, 0, NULL);
 364                 parent = clk_name;
 365
 366                 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
 367                 if (!clk_name) {
 368                         kfree(parent);
 369                         return -ENOMEM;
 370                 }
 371                 clk = clk_register_gate(NULL, clk_name, parent,
 372                                         CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 373                                         prv_base, 31, 0, NULL);
 374                 kfree(parent);
 375                 kfree(clk_name);
 376         }
 377 out:
 378         if (IS_ERR(clk))
 379                 return PTR_ERR(clk);
 380
 381         pdata->clk = clk;
 382         clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
 383         return 0;
 384 }
 385
 386 static int acpi_lpss_create_device(struct acpi_device *adev,
 387                                    const struct acpi_device_id *id)
 388 {
 389         const struct lpss_device_desc *dev_desc;
 390         struct lpss_private_data *pdata;
 391         struct resource_entry *rentry;
 392         struct list_head resource_list;
 393         struct platform_device *pdev;
 394         int ret;
 395
 396         dev_desc = (const struct lpss_device_desc *)id->driver_data;
 397         if (!dev_desc) {
 398                 pdev = acpi_create_platform_device(adev, NULL);
 399                 return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
 400         }
 401         pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 402         if (!pdata)
 403                 return -ENOMEM;
 404
 405         INIT_LIST_HEAD(&resource_list);
 406         ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
 407         if (ret < 0)
 408                 goto err_out;
 409
 410         list_for_each_entry(rentry, &resource_list, node)
 411                 if (resource_type(rentry->res) == IORESOURCE_MEM) {
 412                         if (dev_desc->prv_size_override)
 413                                 pdata->mmio_size = dev_desc->prv_size_override;
 414                         else
 415                                 pdata->mmio_size = resource_size(rentry->res);
 416                         pdata->mmio_base = ioremap(rentry->res->start,
 417                                                    pdata->mmio_size);
 418                         break;
 419                 }
 420
 421         acpi_dev_free_resource_list(&resource_list);
 422
 423         if (!pdata->mmio_base) {
 424                 ret = -ENOMEM;
 425                 goto err_out;
 426         }
 427
 428         pdata->dev_desc = dev_desc;
 429
 430         if (dev_desc->setup)
 431                 dev_desc->setup(pdata);
 432
 433         if (dev_desc->flags & LPSS_CLK) {
 434                 ret = register_device_clock(adev, pdata);
 435                 if (ret) {
 436                         /* Skip the device, but continue the namespace scan. */
 437                         ret = 0;
 438                         goto err_out;
 439                 }
 440         }
 441
 442         /*
 443          * This works around a known issue in ACPI tables where LPSS devices
 444          * have _PS0 and _PS3 without _PSC (and no power resources), so
 445          * acpi_bus_init_power() will assume that the BIOS has put them into D0.
 446          */
 447         ret = acpi_device_fix_up_power(adev);
 448         if (ret) {
 449                 /* Skip the device, but continue the namespace scan. */
 450                 ret = 0;
 451                 goto err_out;
 452         }
 453
 454         adev->driver_data = pdata;
 455         pdev = acpi_create_platform_device(adev, dev_desc->properties);
 456         if (!IS_ERR_OR_NULL(pdev)) {
 457                 return 1;
 458         }
 459
 460         ret = PTR_ERR(pdev);
 461         adev->driver_data = NULL;
 462
 463  err_out:
 464         kfree(pdata);
 465         return ret;
 466 }
 467
 468 static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
 469 {
 470         return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 471 }
 472
 473 static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
 474                              unsigned int reg)
 475 {
 476         writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 477 }
 478
 479 static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
 480 {
 481         struct acpi_device *adev;
 482         struct lpss_private_data *pdata;
 483         unsigned long flags;
 484         int ret;
 485
 486         ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
 487         if (WARN_ON(ret))
 488                 return ret;
 489
 490         spin_lock_irqsave(&dev->power.lock, flags);
 491         if (pm_runtime_suspended(dev)) {
 492                 ret = -EAGAIN;
 493                 goto out;
 494         }
 495         pdata = acpi_driver_data(adev);
 496         if (WARN_ON(!pdata || !pdata->mmio_base)) {
 497                 ret = -ENODEV;
 498                 goto out;
 499         }
 500         *val = __lpss_reg_read(pdata, reg);
 501
 502  out:
 503         spin_unlock_irqrestore(&dev->power.lock, flags);
 504         return ret;
 505 }
 506
 507 static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
 508                              char *buf)
 509 {
 510         u32 ltr_value = 0;
 511         unsigned int reg;
 512         int ret;
 513
 514         reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
 515         ret = lpss_reg_read(dev, reg, &ltr_value);
 516         if (ret)
 517                 return ret;
 518
 519         return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
 520 }
 521
 522 static ssize_t lpss_ltr_mode_show(struct device *dev,
 523                                   struct device_attribute *attr, char *buf)
 524 {
 525         u32 ltr_mode = 0;
 526         char *outstr;
 527         int ret;
 528
 529         ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
 530         if (ret)
 531                 return ret;
 532
 533         outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
 534         return sprintf(buf, "%s\n", outstr);
 535 }
 536
 537 static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
 538 static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
 539 static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
 540
 541 static struct attribute *lpss_attrs[] = {
 542         &dev_attr_auto_ltr.attr,
 543         &dev_attr_sw_ltr.attr,
 544         &dev_attr_ltr_mode.attr,
 545         NULL,
 546 };
 547
 548 static struct attribute_group lpss_attr_group = {
 549         .attrs = lpss_attrs,
 550         .name = "lpss_ltr",
 551 };
 552
 553 static void acpi_lpss_set_ltr(struct device *dev, s32 val)
 554 {
 555         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 556         u32 ltr_mode, ltr_val;
 557
 558         ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
 559         if (val < 0) {
 560                 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
 561                         ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
 562                         __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 563                 }
 564                 return;
 565         }
 566         ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
 567         if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
 568                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
 569                 val = LPSS_LTR_MAX_VAL;
 570         } else if (val > LPSS_LTR_MAX_VAL) {
 571                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
 572                 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
 573         } else {
 574                 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
 575         }
 576         ltr_val |= val;
 577         __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
 578         if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
 579                 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
 580                 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 581         }
 582 }
 583
 584 #ifdef CONFIG_PM
 585 /**
 586  * acpi_lpss_save_ctx() - Save the private registers of LPSS device
 587  * @dev: LPSS device
 588  * @pdata: pointer to the private data of the LPSS device
 589  *
 590  * Most LPSS devices have private registers which may loose their context when
 591  * the device is powered down. acpi_lpss_save_ctx() saves those registers into
 592  * prv_reg_ctx array.
 593  */
 594 static void acpi_lpss_save_ctx(struct device *dev,
 595                                struct lpss_private_data *pdata)
 596 {
 597         unsigned int i;
 598
 599         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 600                 unsigned long offset = i * sizeof(u32);
 601
 602                 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
 603                 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
 604                         pdata->prv_reg_ctx[i], offset);
 605         }
 606 }
 607
 608 /**
 609  * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
 610  * @dev: LPSS device
 611  * @pdata: pointer to the private data of the LPSS device
 612  *
 613  * Restores the registers that were previously stored with acpi_lpss_save_ctx().
 614  */
 615 static void acpi_lpss_restore_ctx(struct device *dev,
 616                                   struct lpss_private_data *pdata)
 617 {
 618         unsigned int i;
 619
 620         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 621                 unsigned long offset = i * sizeof(u32);
 622
 623                 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
 624                 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
 625                         pdata->prv_reg_ctx[i], offset);
 626         }
 627 }
 628
 629 static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
 630 {
 631         /*
 632          * The following delay is needed or the subsequent write operations may
 633          * fail. The LPSS devices are actually PCI devices and the PCI spec
 634          * expects 10ms delay before the device can be accessed after D3 to D0
 635          * transition. However some platforms like BSW does not need this delay.
 636          */
 637         unsigned int delay = 10;        /* default 10ms delay */
 638
 639         if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
 640                 delay = 0;
 641
 642         msleep(delay);
 643 }
 644
 645 static int acpi_lpss_activate(struct device *dev)
 646 {
 647         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 648         int ret;
 649
 650         ret = acpi_dev_runtime_resume(dev);
 651         if (ret)
 652                 return ret;
 653
 654         acpi_lpss_d3_to_d0_delay(pdata);
 655
 656         /*
 657          * This is called only on ->probe() stage where a device is either in
 658          * known state defined by BIOS or most likely powered off. Due to this
 659          * we have to deassert reset line to be sure that ->probe() will
 660          * recognize the device.
 661          */
 662         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 663                 lpss_deassert_reset(pdata);
 664
 665         return 0;
 666 }
 667
 668 static void acpi_lpss_dismiss(struct device *dev)
 669 {
 670         acpi_dev_runtime_suspend(dev);
 671 }
 672
 673 #ifdef CONFIG_PM_SLEEP
 674 static int acpi_lpss_suspend_late(struct device *dev)
 675 {
 676         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 677         int ret;
 678
 679         ret = pm_generic_suspend_late(dev);
 680         if (ret)
 681                 return ret;
 682
 683         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 684                 acpi_lpss_save_ctx(dev, pdata);
 685
 686         return acpi_dev_suspend_late(dev);
 687 }
 688
 689 static int acpi_lpss_resume_early(struct device *dev)
 690 {
 691         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 692         int ret;
 693
 694         ret = acpi_dev_resume_early(dev);
 695         if (ret)
 696                 return ret;
 697
 698         acpi_lpss_d3_to_d0_delay(pdata);
 699
 700         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 701                 acpi_lpss_restore_ctx(dev, pdata);
 702
 703         return pm_generic_resume_early(dev);
 704 }
 705 #endif /* CONFIG_PM_SLEEP */
 706
 707 /* IOSF SB for LPSS island */
 708 #define LPSS_IOSF_UNIT_LPIOEP           0xA0
 709 #define LPSS_IOSF_UNIT_LPIO1            0xAB
 710 #define LPSS_IOSF_UNIT_LPIO2            0xAC
 711
 712 #define LPSS_IOSF_PMCSR                 0x84
 713 #define LPSS_PMCSR_D0                   0
 714 #define LPSS_PMCSR_D3hot                3
 715 #define LPSS_PMCSR_Dx_MASK              GENMASK(1, 0)
 716
 717 #define LPSS_IOSF_GPIODEF0              0x154
 718 #define LPSS_GPIODEF0_DMA1_D3           BIT(2)
 719 #define LPSS_GPIODEF0_DMA2_D3           BIT(3)
 720 #define LPSS_GPIODEF0_DMA_D3_MASK       GENMASK(3, 2)
 721 #define LPSS_GPIODEF0_DMA_LLP           BIT(13)
 722
 723 static DEFINE_MUTEX(lpss_iosf_mutex);
 724
 725 static void lpss_iosf_enter_d3_state(void)
 726 {
 727         u32 value1 = 0;
 728         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 729         u32 value2 = LPSS_PMCSR_D3hot;
 730         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 731         /*
 732          * PMC provides an information about actual status of the LPSS devices.
 733          * Here we read the values related to LPSS power island, i.e. LPSS
 734          * devices, excluding both LPSS DMA controllers, along with SCC domain.
 735          */
 736         u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
 737         int ret;
 738
 739         ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
 740         if (ret)
 741                 return;
 742
 743         mutex_lock(&lpss_iosf_mutex);
 744
 745         ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
 746         if (ret)
 747                 goto exit;
 748
 749         /*
 750          * Get the status of entire LPSS power island per device basis.
 751          * Shutdown both LPSS DMA controllers if and only if all other devices
 752          * are already in D3hot.
 753          */
 754         pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
 755         if (pmc_status)
 756                 goto exit;
 757
 758         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 759                         LPSS_IOSF_PMCSR, value2, mask2);
 760
 761         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 762                         LPSS_IOSF_PMCSR, value2, mask2);
 763
 764         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 765                         LPSS_IOSF_GPIODEF0, value1, mask1);
 766 exit:
 767         mutex_unlock(&lpss_iosf_mutex);
 768 }
 769
 770 static void lpss_iosf_exit_d3_state(void)
 771 {
 772         u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
 773                      LPSS_GPIODEF0_DMA_LLP;
 774         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 775         u32 value2 = LPSS_PMCSR_D0;
 776         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 777
 778         mutex_lock(&lpss_iosf_mutex);
 779
 780         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 781                         LPSS_IOSF_GPIODEF0, value1, mask1);
 782
 783         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 784                         LPSS_IOSF_PMCSR, value2, mask2);
 785
 786         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 787                         LPSS_IOSF_PMCSR, value2, mask2);
 788
 789         mutex_unlock(&lpss_iosf_mutex);
 790 }
 791
 792 static int acpi_lpss_runtime_suspend(struct device *dev)
 793 {
 794         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 795         int ret;
 796
 797         ret = pm_generic_runtime_suspend(dev);
 798         if (ret)
 799                 return ret;
 800
 801         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 802                 acpi_lpss_save_ctx(dev, pdata);
 803
 804         ret = acpi_dev_runtime_suspend(dev);
 805
 806         /*
 807          * This call must be last in the sequence, otherwise PMC will return
 808          * wrong status for devices being about to be powered off. See
 809          * lpss_iosf_enter_d3_state() for further information.
 810          */
 811         if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
 812                 lpss_iosf_enter_d3_state();
 813
 814         return ret;
 815 }
 816
 817 static int acpi_lpss_runtime_resume(struct device *dev)
 818 {
 819         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 820         int ret;
 821
 822         /*
 823          * This call is kept first to be in symmetry with
 824          * acpi_lpss_runtime_suspend() one.
 825          */
 826         if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
 827                 lpss_iosf_exit_d3_state();
 828
 829         ret = acpi_dev_runtime_resume(dev);
 830         if (ret)
 831                 return ret;
 832
 833         acpi_lpss_d3_to_d0_delay(pdata);
 834
 835         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 836                 acpi_lpss_restore_ctx(dev, pdata);
 837
 838         return pm_generic_runtime_resume(dev);
 839 }
 840 #endif /* CONFIG_PM */
 841
 842 static struct dev_pm_domain acpi_lpss_pm_domain = {
 843 #ifdef CONFIG_PM
 844         .activate = acpi_lpss_activate,
 845         .dismiss = acpi_lpss_dismiss,
 846 #endif
 847         .ops = {
 848 #ifdef CONFIG_PM
 849 #ifdef CONFIG_PM_SLEEP
 850                 .prepare = acpi_subsys_prepare,
 851                 .complete = pm_complete_with_resume_check,
 852                 .suspend = acpi_subsys_suspend,
 853                 .suspend_late = acpi_lpss_suspend_late,
 854                 .resume_early = acpi_lpss_resume_early,
 855                 .freeze = acpi_subsys_freeze,
 856                 .poweroff = acpi_subsys_suspend,
 857                 .poweroff_late = acpi_lpss_suspend_late,
 858                 .restore_early = acpi_lpss_resume_early,
 859 #endif
 860                 .runtime_suspend = acpi_lpss_runtime_suspend,
 861                 .runtime_resume = acpi_lpss_runtime_resume,
 862 #endif
 863         },
 864 };
 865
 866 static int acpi_lpss_platform_notify(struct notifier_block *nb,
 867                                      unsigned long action, void *data)
 868 {
 869         struct platform_device *pdev = to_platform_device(data);
 870         struct lpss_private_data *pdata;
 871         struct acpi_device *adev;
 872         const struct acpi_device_id *id;
 873
 874         id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
 875         if (!id || !id->driver_data)
 876                 return 0;
 877
 878         if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
 879                 return 0;
 880
 881         pdata = acpi_driver_data(adev);
 882         if (!pdata)
 883                 return 0;
 884
 885         if (pdata->mmio_base &&
 886             pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
 887                 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
 888                 return 0;
 889         }
 890
 891         switch (action) {
 892         case BUS_NOTIFY_BIND_DRIVER:
 893                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
 894                 break;
 895         case BUS_NOTIFY_DRIVER_NOT_BOUND:
 896         case BUS_NOTIFY_UNBOUND_DRIVER:
 897                 dev_pm_domain_set(&pdev->dev, NULL);
 898                 break;
 899         case BUS_NOTIFY_ADD_DEVICE:
 900                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
 901                 if (pdata->dev_desc->flags & LPSS_LTR)
 902                         return sysfs_create_group(&pdev->dev.kobj,
 903                                                   &lpss_attr_group);
 904                 break;
 905         case BUS_NOTIFY_DEL_DEVICE:
 906                 if (pdata->dev_desc->flags & LPSS_LTR)
 907                         sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
 908                 dev_pm_domain_set(&pdev->dev, NULL);
 909                 break;
 910         default:
 911                 break;
 912         }
 913
 914         return 0;
 915 }
 916
 917 static struct notifier_block acpi_lpss_nb = {
 918         .notifier_call = acpi_lpss_platform_notify,
 919 };
 920
 921 static void acpi_lpss_bind(struct device *dev)
 922 {
 923         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 924
 925         if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
 926                 return;
 927
 928         if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
 929                 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
 930         else
 931                 dev_err(dev, "MMIO size insufficient to access LTR\n");
 932 }
 933
 934 static void acpi_lpss_unbind(struct device *dev)
 935 {
 936         dev->power.set_latency_tolerance = NULL;
 937 }
 938
 939 static struct acpi_scan_handler lpss_handler = {
 940         .ids = acpi_lpss_device_ids,
 941         .attach = acpi_lpss_create_device,
 942         .bind = acpi_lpss_bind,
 943         .unbind = acpi_lpss_unbind,
 944 };
 945
 946 void __init acpi_lpss_init(void)
 947 {
 948         const struct x86_cpu_id *id;
 949         int ret;
 950
 951         ret = lpt_clk_init();
 952         if (ret)
 953                 return;
 954
 955         id = x86_match_cpu(lpss_cpu_ids);
 956         if (id)
 957                 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
 958
 959         bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
 960         acpi_scan_add_handler(&lpss_handler);
 961 }
 962
 963 #else
 964
 965 static struct acpi_scan_handler lpss_handler = {
 966         .ids = acpi_lpss_device_ids,
 967 };
 968
 969 void __init acpi_lpss_init(void)
 970 {
 971         acpi_scan_add_handler(&lpss_handler);
 972 }
 973
 974 #endif /* CONFIG_X86_INTEL_LPSS */