drivers/Makefile

   1 ifdef CONFIG_SPL_BUILD
   2
   3 obj-$(CONFIG_SPL_CLK_SUPPORT) += clk/
   4 obj-$(CONFIG_SPL_DM) += core/
   5 obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
   6 obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
   7 obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
   8 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
   9 obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/
  10 obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/
  11 obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
  12 obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
  13 obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
  14 obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
  15 obj-$(CONFIG_SPL_LED_SUPPORT) += led/
  16 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
  17 obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
  18 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
  19 obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
  20 obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
  21 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
  22 obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
  23 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
  24 obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
  25 obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
  26 obj-$(CONFIG_SPL_RAM_SUPPORT) += ram/
  27 obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
  28 obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
  29 obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
  30 obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
  31 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
  32 obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
  33
  34 else
  35
  36 obj-$(CONFIG_CLK) += clk/
  37 obj-$(CONFIG_DM) += core/
  38 obj-$(CONFIG_DM_DEMO) += demo/
  39 obj-$(CONFIG_BIOSEMU) += bios_emulator/
  40 obj-y += block/
  41 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
  42 obj-$(CONFIG_CPU) += cpu/
  43 obj-y += crypto/
  44 obj-$(CONFIG_FPGA) += fpga/
  45 obj-y += hwmon/
  46 obj-$(CONFIG_LED) += led/
  47 obj-y += misc/
  48 obj-y += pcmcia/
  49 obj-y += dfu/
  50 obj-$(CONFIG_RAM) += ram/
  51 obj-y += rtc/
  52 obj-y += sound/
  53 obj-y += tpm/
  54 obj-y += twserial/
  55 obj-y += video/
  56 obj-y += watchdog/
  57 obj-$(CONFIG_QE) += qe/
  58 obj-$(CONFIG_U_QE) += qe/
  59 obj-y += memory/
  60 obj-y += pwm/
  61 obj-y += input/
  62 # SOC specific infrastructure drivers.
  63 obj-y += soc/
  64 obj-y += thermal/
  65
  66 endif