drivers/Makefile

   1 #
   2 # Makefile for the Linux kernel device drivers.
   3 #
   4 # 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
   5 # Rewritten to use lists instead of if-statements.
   6 #
   7
   8 obj-y                           += irqchip/
   9 obj-y                           += bus/
  10
  11 # GPIO must come after pinctrl as gpios may need to mux pins etc
  12 obj-y                           += pinctrl/
  13 obj-y                           += gpio/
  14 obj-y                           += pwm/
  15 obj-$(CONFIG_PCI)               += pci/
  16 obj-$(CONFIG_PARISC)            += parisc/
  17 obj-$(CONFIG_RAPIDIO)           += rapidio/
  18 obj-y                           += video/
  19 obj-y                           += idle/
  20
  21 # IPMI must come before ACPI in order to provide IPMI opregion support
  22 obj-$(CONFIG_IPMI_HANDLER)      += char/ipmi/
  23
  24 obj-$(CONFIG_ACPI)              += acpi/
  25 obj-$(CONFIG_SFI)               += sfi/
  26 # PnP must come after ACPI since it will eventually need to check if acpi
  27 # was used and do nothing if so
  28 obj-$(CONFIG_PNP)               += pnp/
  29 obj-y                           += amba/
  30 # Many drivers will want to use DMA so this has to be made available
  31 # really early.
  32 obj-$(CONFIG_DMA_ENGINE)        += dma/
  33
  34 obj-$(CONFIG_VIRTIO)            += virtio/
  35 obj-$(CONFIG_XEN)               += xen/
  36
  37 # regulators early, since some subsystems rely on them to initialize
  38 obj-$(CONFIG_REGULATOR)         += regulator/
  39
  40 # tty/ comes before char/ so that the VT console is the boot-time
  41 # default.
  42 obj-y                           += tty/
  43 obj-y                           += char/
  44
  45 # gpu/ comes after char for AGP vs DRM startup
  46 obj-y                           += gpu/
  47
  48 obj-$(CONFIG_CONNECTOR)         += connector/
  49
  50 # i810fb and intelfb depend on char/agp/
  51 obj-$(CONFIG_FB_I810)           += video/i810/
  52 obj-$(CONFIG_FB_INTEL)          += video/intelfb/
  53
  54 obj-$(CONFIG_PARPORT)           += parport/
  55 obj-y                           += base/ block/ misc/ mfd/ nfc/
  56 obj-$(CONFIG_NUBUS)             += nubus/
  57 obj-y                           += macintosh/
  58 obj-$(CONFIG_IDE)               += ide/
  59 obj-$(CONFIG_SCSI)              += scsi/
  60 obj-$(CONFIG_ATA)               += ata/
  61 obj-$(CONFIG_TARGET_CORE)       += target/
  62 obj-$(CONFIG_MTD)               += mtd/
  63 obj-$(CONFIG_SPI)               += spi/
  64 obj-y                           += hsi/
  65 obj-y                           += net/
  66 obj-$(CONFIG_ATM)               += atm/
  67 obj-$(CONFIG_FUSION)            += message/
  68 obj-y                           += firewire/
  69 obj-$(CONFIG_UIO)               += uio/
  70 obj-$(CONFIG_VFIO)              += vfio/
  71 obj-y                           += cdrom/
  72 obj-y                           += auxdisplay/
  73 obj-$(CONFIG_PCCARD)            += pcmcia/
  74 obj-$(CONFIG_DIO)               += dio/
  75 obj-$(CONFIG_SBUS)              += sbus/
  76 obj-$(CONFIG_ZORRO)             += zorro/
  77 obj-$(CONFIG_MAC)               += macintosh/
  78 obj-$(CONFIG_ATA_OVER_ETH)      += block/aoe/
  79 obj-$(CONFIG_PARIDE)            += block/paride/
  80 obj-$(CONFIG_TC)                += tc/
  81 obj-$(CONFIG_UWB)               += uwb/
  82 obj-$(CONFIG_USB_OTG_UTILS)     += usb/
  83 obj-$(CONFIG_USB)               += usb/
  84 obj-$(CONFIG_PCI)               += usb/
  85 obj-$(CONFIG_USB_GADGET)        += usb/
  86 obj-$(CONFIG_SERIO)             += input/serio/
  87 obj-$(CONFIG_GAMEPORT)          += input/gameport/
  88 obj-$(CONFIG_INPUT)             += input/
  89 obj-$(CONFIG_I2O)               += message/
  90 obj-$(CONFIG_RTC_LIB)           += rtc/
  91 obj-y                           += i2c/ media/
  92 obj-$(CONFIG_PPS)               += pps/
  93 obj-$(CONFIG_PTP_1588_CLOCK)    += ptp/
  94 obj-$(CONFIG_W1)                += w1/
  95 obj-$(CONFIG_POWER_SUPPLY)      += power/
  96 obj-$(CONFIG_HWMON)             += hwmon/
  97 obj-$(CONFIG_THERMAL)           += thermal/
  98 obj-$(CONFIG_WATCHDOG)          += watchdog/
  99 obj-$(CONFIG_MD)                += md/
 100 obj-$(CONFIG_BT)                += bluetooth/
 101 obj-$(CONFIG_ACCESSIBILITY)     += accessibility/
 102 obj-$(CONFIG_ISDN)              += isdn/
 103 obj-$(CONFIG_EDAC)              += edac/
 104 obj-$(CONFIG_EISA)              += eisa/
 105 obj-y                           += lguest/
 106 obj-$(CONFIG_CPU_FREQ)          += cpufreq/
 107 obj-$(CONFIG_CPU_IDLE)          += cpuidle/
 108 obj-y                           += mmc/
 109 obj-$(CONFIG_MEMSTICK)          += memstick/
 110 obj-y                           += leds/
 111 obj-$(CONFIG_INFINIBAND)        += infiniband/
 112 obj-$(CONFIG_SGI_SN)            += sn/
 113 obj-y                           += firmware/
 114 obj-$(CONFIG_CRYPTO)            += crypto/
 115 obj-$(CONFIG_SUPERH)            += sh/
 116 obj-$(CONFIG_ARCH_SHMOBILE)     += sh/
 117 ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
 118 obj-y                           += clocksource/
 119 endif
 120 obj-$(CONFIG_DCA)               += dca/
 121 obj-$(CONFIG_HID)               += hid/
 122 obj-$(CONFIG_PPC_PS3)           += ps3/
 123 obj-$(CONFIG_OF)                += of/
 124 obj-$(CONFIG_SSB)               += ssb/
 125 obj-$(CONFIG_BCMA)              += bcma/
 126 obj-$(CONFIG_VHOST_NET)         += vhost/
 127 obj-$(CONFIG_VLYNQ)             += vlynq/
 128 obj-$(CONFIG_STAGING)           += staging/
 129 obj-y                           += platform/
 130 #common clk code
 131 obj-y                           += clk/
 132
 133 obj-$(CONFIG_HWSPINLOCK)        += hwspinlock/
 134 obj-$(CONFIG_NFC)               += nfc/
 135 obj-$(CONFIG_IOMMU_SUPPORT)     += iommu/
 136 obj-$(CONFIG_REMOTEPROC)        += remoteproc/
 137 obj-$(CONFIG_RPMSG)             += rpmsg/
 138
 139 # Virtualization drivers
 140 obj-$(CONFIG_VIRT_DRIVERS)      += virt/
 141 obj-$(CONFIG_HYPERV)            += hv/
 142
 143 obj-$(CONFIG_PM_DEVFREQ)        += devfreq/
 144 obj-$(CONFIG_EXTCON)            += extcon/
 145 obj-$(CONFIG_MEMORY)            += memory/
 146 obj-$(CONFIG_IIO)               += iio/
 147 obj-$(CONFIG_VME_BUS)           += vme/
 148 obj-$(CONFIG_IPACK_BUS)         += ipack/