Merge tag 'dmaengine-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul...
[platform/kernel/linux-starfive.git] / drivers / Makefile
1 # SPDX-License-Identifier: GPL-2.0
2 #
3 # Makefile for the Linux kernel device drivers.
4 #
5 # 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
6 # Rewritten to use lists instead of if-statements.
7 #
8
9 obj-y                           += irqchip/
10 obj-y                           += bus/
11
12 obj-$(CONFIG_GENERIC_PHY)       += phy/
13
14 # GPIO must come after pinctrl as gpios may need to mux pins etc
15 obj-$(CONFIG_PINCTRL)           += pinctrl/
16 obj-$(CONFIG_GPIOLIB)           += gpio/
17 obj-y                           += pwm/
18
19 obj-y                           += pci/
20
21 obj-$(CONFIG_PARISC)            += parisc/
22 obj-$(CONFIG_RAPIDIO)           += rapidio/
23 obj-y                           += video/
24 obj-y                           += idle/
25
26 # IPMI must come before ACPI in order to provide IPMI opregion support
27 obj-y                           += char/ipmi/
28
29 obj-$(CONFIG_ACPI)              += acpi/
30
31 # PnP must come after ACPI since it will eventually need to check if acpi
32 # was used and do nothing if so
33 obj-$(CONFIG_PNP)               += pnp/
34 obj-y                           += amba/
35
36 obj-y                           += clk/
37 # Many drivers will want to use DMA so this has to be made available
38 # really early.
39 obj-$(CONFIG_DMADEVICES)        += dma/
40
41 # SOC specific infrastructure drivers.
42 obj-y                           += soc/
43
44 obj-y                           += virtio/
45 obj-$(CONFIG_VDPA)              += vdpa/
46 obj-$(CONFIG_XEN)               += xen/
47
48 # regulators early, since some subsystems rely on them to initialize
49 obj-$(CONFIG_REGULATOR)         += regulator/
50
51 # reset controllers early, since gpu drivers might rely on them to initialize
52 obj-$(CONFIG_RESET_CONTROLLER)  += reset/
53
54 # tty/ comes before char/ so that the VT console is the boot-time
55 # default.
56 obj-y                           += tty/
57 obj-y                           += char/
58
59 # iommu/ comes before gpu as gpu are using iommu controllers
60 obj-y                           += iommu/
61
62 # gpu/ comes after char for AGP vs DRM startup and after iommu
63 obj-y                           += gpu/
64
65 obj-$(CONFIG_CONNECTOR)         += connector/
66
67 # i810fb and intelfb depend on char/agp/
68 obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
69 obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
70
71 obj-$(CONFIG_PARPORT)           += parport/
72 obj-y                           += base/ block/ misc/ mfd/ nfc/
73 obj-$(CONFIG_LIBNVDIMM)         += nvdimm/
74 obj-$(CONFIG_DAX)               += dax/
75 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
76 obj-$(CONFIG_NUBUS)             += nubus/
77 obj-y                           += cxl/
78 obj-y                           += macintosh/
79 obj-y                           += scsi/
80 obj-y                           += nvme/
81 obj-$(CONFIG_ATA)               += ata/
82 obj-$(CONFIG_TARGET_CORE)       += target/
83 obj-$(CONFIG_MTD)               += mtd/
84 obj-$(CONFIG_SPI)               += spi/
85 obj-$(CONFIG_SPMI)              += spmi/
86 obj-$(CONFIG_HSI)               += hsi/
87 obj-$(CONFIG_SLIMBUS)           += slimbus/
88 obj-y                           += net/
89 obj-$(CONFIG_ATM)               += atm/
90 obj-$(CONFIG_FUSION)            += message/
91 obj-y                           += firewire/
92 obj-$(CONFIG_UIO)               += uio/
93 obj-$(CONFIG_VFIO)              += vfio/
94 obj-y                           += cdrom/
95 obj-y                           += auxdisplay/
96 obj-$(CONFIG_PCCARD)            += pcmcia/
97 obj-$(CONFIG_DIO)               += dio/
98 obj-$(CONFIG_SBUS)              += sbus/
99 obj-$(CONFIG_ZORRO)             += zorro/
100 obj-$(CONFIG_ATA_OVER_ETH)      += block/aoe/
101 obj-$(CONFIG_PARIDE)            += block/paride/
102 obj-$(CONFIG_TC)                += tc/
103 obj-$(CONFIG_USB_PHY)           += usb/
104 obj-$(CONFIG_USB)               += usb/
105 obj-$(CONFIG_USB_SUPPORT)       += usb/
106 obj-$(CONFIG_PCI)               += usb/
107 obj-$(CONFIG_USB_GADGET)        += usb/
108 obj-$(CONFIG_OF)                += usb/
109 obj-$(CONFIG_SERIO)             += input/serio/
110 obj-$(CONFIG_GAMEPORT)          += input/gameport/
111 obj-$(CONFIG_INPUT)             += input/
112 obj-$(CONFIG_RTC_LIB)           += rtc/
113 obj-y                           += i2c/ i3c/ media/
114 obj-$(CONFIG_PPS)               += pps/
115 obj-y                           += ptp/
116 obj-$(CONFIG_W1)                += w1/
117 obj-y                           += power/
118 obj-$(CONFIG_HWMON)             += hwmon/
119 obj-$(CONFIG_THERMAL)           += thermal/
120 obj-$(CONFIG_WATCHDOG)          += watchdog/
121 obj-$(CONFIG_MD)                += md/
122 obj-$(CONFIG_BT)                += bluetooth/
123 obj-$(CONFIG_ACCESSIBILITY)     += accessibility/
124 obj-$(CONFIG_ISDN)              += isdn/
125 obj-$(CONFIG_EDAC)              += edac/
126 obj-$(CONFIG_EISA)              += eisa/
127 obj-$(CONFIG_PM_OPP)            += opp/
128 obj-$(CONFIG_CPU_FREQ)          += cpufreq/
129 obj-$(CONFIG_CPU_IDLE)          += cpuidle/
130 obj-y                           += mmc/
131 obj-y                           += ufs/
132 obj-$(CONFIG_MEMSTICK)          += memstick/
133 obj-$(CONFIG_NEW_LEDS)          += leds/
134 obj-$(CONFIG_INFINIBAND)        += infiniband/
135 obj-y                           += firmware/
136 obj-$(CONFIG_CRYPTO)            += crypto/
137 obj-$(CONFIG_SUPERH)            += sh/
138 obj-y                           += clocksource/
139 obj-$(CONFIG_DCA)               += dca/
140 obj-$(CONFIG_HID)               += hid/
141 obj-$(CONFIG_PPC_PS3)           += ps3/
142 obj-$(CONFIG_OF)                += of/
143 obj-$(CONFIG_SSB)               += ssb/
144 obj-$(CONFIG_BCMA)              += bcma/
145 obj-$(CONFIG_VHOST_RING)        += vhost/
146 obj-$(CONFIG_VHOST_IOTLB)       += vhost/
147 obj-$(CONFIG_VHOST)             += vhost/
148 obj-$(CONFIG_VLYNQ)             += vlynq/
149 obj-$(CONFIG_GREYBUS)           += greybus/
150 obj-$(CONFIG_COMEDI)            += comedi/
151 obj-$(CONFIG_STAGING)           += staging/
152 obj-y                           += platform/
153
154 obj-$(CONFIG_MAILBOX)           += mailbox/
155 obj-$(CONFIG_HWSPINLOCK)        += hwspinlock/
156 obj-$(CONFIG_REMOTEPROC)        += remoteproc/
157 obj-$(CONFIG_RPMSG)             += rpmsg/
158 obj-$(CONFIG_SOUNDWIRE)         += soundwire/
159
160 # Virtualization drivers
161 obj-$(CONFIG_VIRT_DRIVERS)      += virt/
162 obj-$(subst m,y,$(CONFIG_HYPERV))       += hv/
163
164 obj-$(CONFIG_PM_DEVFREQ)        += devfreq/
165 obj-$(CONFIG_EXTCON)            += extcon/
166 obj-$(CONFIG_MEMORY)            += memory/
167 obj-$(CONFIG_IIO)               += iio/
168 obj-$(CONFIG_IPACK_BUS)         += ipack/
169 obj-$(CONFIG_NTB)               += ntb/
170 obj-$(CONFIG_POWERCAP)          += powercap/
171 obj-$(CONFIG_MCB)               += mcb/
172 obj-$(CONFIG_PERF_EVENTS)       += perf/
173 obj-$(CONFIG_RAS)               += ras/
174 obj-$(CONFIG_USB4)              += thunderbolt/
175 obj-$(CONFIG_CORESIGHT)         += hwtracing/coresight/
176 obj-y                           += hwtracing/intel_th/
177 obj-$(CONFIG_STM)               += hwtracing/stm/
178 obj-y                           += android/
179 obj-$(CONFIG_NVMEM)             += nvmem/
180 obj-$(CONFIG_FPGA)              += fpga/
181 obj-$(CONFIG_FSI)               += fsi/
182 obj-$(CONFIG_TEE)               += tee/
183 obj-$(CONFIG_MULTIPLEXER)       += mux/
184 obj-$(CONFIG_SIOX)              += siox/
185 obj-$(CONFIG_GNSS)              += gnss/
186 obj-$(CONFIG_INTERCONNECT)      += interconnect/
187 obj-$(CONFIG_COUNTER)           += counter/
188 obj-$(CONFIG_MOST)              += most/
189 obj-$(CONFIG_PECI)              += peci/
190 obj-$(CONFIG_HTE)               += hte/