1 # Makefile.in generated by automake 1.11.3 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 # GTK+ - The GIMP Toolkit
20 pkgdatadir = $(datadir)/@PACKAGE@
21 pkgincludedir = $(includedir)/@PACKAGE@
22 pkglibdir = $(libdir)/@PACKAGE@
23 pkglibexecdir = $(libexecdir)/@PACKAGE@
24 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
25 install_sh_DATA = $(install_sh) -c -m 644
26 install_sh_PROGRAM = $(install_sh) -c
27 install_sh_SCRIPT = $(install_sh) -c
28 INSTALL_HEADER = $(INSTALL_DATA)
29 transform = $(program_transform_name)
36 build_triplet = @build@
38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
39 $(top_srcdir)/Makefile.decl
41 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42 am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
43 $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \
44 $(top_srcdir)/m4/intlmacosx.m4 \
45 $(top_srcdir)/m4/introspection.m4 $(top_srcdir)/m4/lib-ld.m4 \
46 $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
47 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
48 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
49 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
50 $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
51 $(top_srcdir)/configure.ac
52 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
54 mkinstalldirs = $(install_sh) -d
55 CONFIG_HEADER = $(top_builddir)/config.h
57 CONFIG_CLEAN_VPATH_FILES =
58 AM_V_GEN = $(am__v_GEN_@AM_V@)
59 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
60 am__v_GEN_0 = @echo " GEN " $@;
61 AM_V_at = $(am__v_at_@AM_V@)
62 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
66 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
67 html-recursive info-recursive install-data-recursive \
68 install-dvi-recursive install-exec-recursive \
69 install-html-recursive install-info-recursive \
70 install-pdf-recursive install-ps-recursive install-recursive \
71 installcheck-recursive installdirs-recursive pdf-recursive \
72 ps-recursive uninstall-recursive
73 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
74 distclean-recursive maintainer-clean-recursive
75 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
76 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
80 DIST_SUBDIRS = $(SUBDIRS)
81 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
84 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
85 sed_rest='s,^[^/]*/*,,'; \
86 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
87 sed_butlast='s,/*[^/]*$$,,'; \
88 while test -n "$$dir1"; do \
89 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
90 if test "$$first" != "."; then \
91 if test "$$first" = ".."; then \
92 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
93 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
95 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
96 if test "$$first2" = "$$first"; then \
97 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
101 dir0="$$dir0"/"$$first"; \
104 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
109 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
112 AUTOCONF = @AUTOCONF@
113 AUTOHEADER = @AUTOHEADER@
114 AUTOMAKE = @AUTOMAKE@
116 BASE_DEPENDENCIES_CFLAGS = @BASE_DEPENDENCIES_CFLAGS@
117 BASE_DEPENDENCIES_LIBS = @BASE_DEPENDENCIES_LIBS@
120 CCASDEPMODE = @CCASDEPMODE@
121 CCASFLAGS = @CCASFLAGS@
122 CCDEPMODE = @CCDEPMODE@
125 CPPFLAGS = @CPPFLAGS@
126 CYGPATH_W = @CYGPATH_W@
131 DSYMUTIL = @DSYMUTIL@
138 EXE_MANIFEST_ARCHITECTURE = @EXE_MANIFEST_ARCHITECTURE@
140 GDK_PIXBUF_API_VERSION = @GDK_PIXBUF_API_VERSION@
141 GDK_PIXBUF_BINARY_VERSION = @GDK_PIXBUF_BINARY_VERSION@
142 GDK_PIXBUF_CSOURCE = @GDK_PIXBUF_CSOURCE@
143 GDK_PIXBUF_DEP_CFLAGS = @GDK_PIXBUF_DEP_CFLAGS@
144 GDK_PIXBUF_DEP_LIBS = @GDK_PIXBUF_DEP_LIBS@
145 GDK_PIXBUF_EXTRA_CFLAGS = @GDK_PIXBUF_EXTRA_CFLAGS@
146 GDK_PIXBUF_EXTRA_LIBS = @GDK_PIXBUF_EXTRA_LIBS@
147 GDK_PIXBUF_LINK_FLAGS = @GDK_PIXBUF_LINK_FLAGS@
148 GDK_PIXBUF_MAJOR = @GDK_PIXBUF_MAJOR@
149 GDK_PIXBUF_MICRO = @GDK_PIXBUF_MICRO@
150 GDK_PIXBUF_MINOR = @GDK_PIXBUF_MINOR@
151 GDK_PIXBUF_PACKAGES = @GDK_PIXBUF_PACKAGES@
152 GDK_PIXBUF_VERSION = @GDK_PIXBUF_VERSION@
153 GDK_PIXBUF_XLIB_DEP_CFLAGS = @GDK_PIXBUF_XLIB_DEP_CFLAGS@
154 GDK_PIXBUF_XLIB_DEP_LIBS = @GDK_PIXBUF_XLIB_DEP_LIBS@
155 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
156 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
157 GLIB_CFLAGS = @GLIB_CFLAGS@
158 GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@
159 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
160 GLIB_LIBS = @GLIB_LIBS@
161 GLIB_MKENUMS = @GLIB_MKENUMS@
163 GMSGFMT_015 = @GMSGFMT_015@
164 GOBJECT_QUERY = @GOBJECT_QUERY@
166 GTKDOC_CHECK = @GTKDOC_CHECK@
167 GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
168 GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
169 GTKDOC_MKPDF = @GTKDOC_MKPDF@
170 GTKDOC_REBASE = @GTKDOC_REBASE@
171 GTK_UPDATE_ICON_CACHE = @GTK_UPDATE_ICON_CACHE@
172 HTML_DIR = @HTML_DIR@
173 INCLUDED_LOADER_DEFINE = @INCLUDED_LOADER_DEFINE@
174 INCLUDED_LOADER_OBJ = @INCLUDED_LOADER_OBJ@
176 INSTALL_DATA = @INSTALL_DATA@
177 INSTALL_PROGRAM = @INSTALL_PROGRAM@
178 INSTALL_SCRIPT = @INSTALL_SCRIPT@
179 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
180 INTLLIBS = @INTLLIBS@
181 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
182 INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
183 INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
184 INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
185 INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
186 INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
187 INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
188 INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
189 INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
192 LIBICONV = @LIBICONV@
194 LIBJASPER = @LIBJASPER@
201 LIBTOOL_EXPORT_OPTIONS = @LIBTOOL_EXPORT_OPTIONS@
202 LIB_EXE_MACHINE_FLAG = @LIB_EXE_MACHINE_FLAG@
205 LTLIBICONV = @LTLIBICONV@
206 LTLIBINTL = @LTLIBINTL@
207 LTLIBOBJS = @LTLIBOBJS@
208 LT_CURRENT_MINUS_AGE = @LT_CURRENT_MINUS_AGE@
209 LT_VERSION_INFO = @LT_VERSION_INFO@
211 MAKEINFO = @MAKEINFO@
212 MANIFEST_TOOL = @MANIFEST_TOOL@
213 MATH_LIB = @MATH_LIB@
216 MSGFMT_015 = @MSGFMT_015@
217 MSGMERGE = @MSGMERGE@
225 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
226 PACKAGE_NAME = @PACKAGE_NAME@
227 PACKAGE_STRING = @PACKAGE_STRING@
228 PACKAGE_TARNAME = @PACKAGE_TARNAME@
229 PACKAGE_URL = @PACKAGE_URL@
230 PACKAGE_VERSION = @PACKAGE_VERSION@
231 PATH_SEPARATOR = @PATH_SEPARATOR@
233 PKG_CONFIG = @PKG_CONFIG@
234 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
235 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
236 PNG_DEP_CFLAGS_PACKAGES = @PNG_DEP_CFLAGS_PACKAGES@
241 SET_MAKE = @SET_MAKE@
247 XGETTEXT = @XGETTEXT@
248 XGETTEXT_015 = @XGETTEXT_015@
249 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
250 XSLTPROC = @XSLTPROC@
251 abs_builddir = @abs_builddir@
252 abs_srcdir = @abs_srcdir@
253 abs_top_builddir = @abs_top_builddir@
254 abs_top_srcdir = @abs_top_srcdir@
255 ac_ct_AR = @ac_ct_AR@
256 ac_ct_CC = @ac_ct_CC@
257 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
258 am__include = @am__include@
259 am__leading_dot = @am__leading_dot@
260 am__quote = @am__quote@
262 am__untar = @am__untar@
265 build_alias = @build_alias@
266 build_cpu = @build_cpu@
267 build_os = @build_os@
268 build_vendor = @build_vendor@
269 builddir = @builddir@
271 datarootdir = @datarootdir@
274 exec_prefix = @exec_prefix@
276 host_alias = @host_alias@
277 host_cpu = @host_cpu@
279 host_vendor = @host_vendor@
281 includedir = @includedir@
283 install_sh = @install_sh@
285 libexecdir = @libexecdir@
286 localedir = @localedir@
287 localstatedir = @localstatedir@
290 ms_librarian = @ms_librarian@
291 oldincludedir = @oldincludedir@
294 program_transform_name = @program_transform_name@
297 sharedstatedir = @sharedstatedir@
299 sysconfdir = @sysconfdir@
300 target_alias = @target_alias@
301 top_build_prefix = @top_build_prefix@
302 top_builddir = @top_builddir@
303 top_srcdir = @top_srcdir@
304 GTESTER = gtester # in $PATH for non-GLIB packages
305 GTESTER_REPORT = gtester-report # in $PATH for non-GLIB packages
307 # initialize variables for unconditional += appending
313 # Xvfb based test rules
314 XVFB = Xvfb -ac -noreset -screen 0 800x600x16
315 XIDS = 101 102 103 104 105 106 107 197 199 211 223 227 293 307 308 309 310 311 \
316 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 \
317 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 \
318 1008 1009 4703 4721 4723 4729 4733 4751 9973 9974 9975 9976 9977 9978 9979 \
319 9980 9981 9982 9983 9984 9985 9986 9987 9988 9989 9990 9991 9992 9993 9994 \
320 9995 9996 9997 9998 9999
323 test "$(gdktarget)" != "x11" \
324 && echo "Gtk+Tests:INFO: Skipping GUI tests for non-X11 target."
327 ${XVFB} -help 2>/dev/null 1>&2 \
328 && XID=`for id in $(XIDS) ; do test -e /tmp/.X$$id-lock || { echo $$id; exit 0; }; done; exit 1` \
329 && { ${XVFB} :$$XID -screen 0 800x600x16 -nolisten tcp -auth /dev/null >/dev/null 2>&1 & \
330 trap "kill -15 $$! " 0 HUP INT QUIT TRAP USR1 PIPE TERM ; } \
331 || { echo "Gtk+Tests:ERROR: Failed to start Xvfb environment for X11 target tests."; exit 1; } \
332 && DISPLAY=:$$XID && export DISPLAY
338 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.decl $(am__configure_deps)
340 case '$(am__configure_deps)' in \
342 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
343 && { if test -f $@; then exit 0; else break; fi; }; \
347 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign docs/Makefile'; \
348 $(am__cd) $(top_srcdir) && \
349 $(AUTOMAKE) --foreign docs/Makefile
351 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
354 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
356 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
357 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
359 $(top_srcdir)/Makefile.decl:
361 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
362 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
364 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
365 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
366 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
367 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
368 $(am__aclocal_m4_deps):
376 # This directory's subdirectories are mostly independent; you can cd
377 # into them and run `make' without going through this Makefile.
378 # To change the values of `make' variables: instead of editing Makefiles,
379 # (1) if the variable is set in `config.status', edit `config.status'
380 # (which will cause the Makefiles to be regenerated when you run `make');
381 # (2) otherwise, pass the desired values on the `make' command line.
382 $(RECURSIVE_TARGETS):
383 @fail= failcom='exit 1'; \
384 for f in x $$MAKEFLAGS; do \
387 *k*) failcom='fail=yes';; \
391 target=`echo $@ | sed s/-recursive//`; \
392 list='$(SUBDIRS)'; for subdir in $$list; do \
393 echo "Making $$target in $$subdir"; \
394 if test "$$subdir" = "."; then \
396 local_target="$$target-am"; \
398 local_target="$$target"; \
400 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
403 if test "$$dot_seen" = "no"; then \
404 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
407 $(RECURSIVE_CLEAN_TARGETS):
408 @fail= failcom='exit 1'; \
409 for f in x $$MAKEFLAGS; do \
412 *k*) failcom='fail=yes';; \
417 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
418 *) list='$(SUBDIRS)' ;; \
420 rev=''; for subdir in $$list; do \
421 if test "$$subdir" = "."; then :; else \
422 rev="$$subdir $$rev"; \
426 target=`echo $@ | sed s/-recursive//`; \
427 for subdir in $$rev; do \
428 echo "Making $$target in $$subdir"; \
429 if test "$$subdir" = "."; then \
430 local_target="$$target-am"; \
432 local_target="$$target"; \
434 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
436 done && test -z "$$fail"
438 list='$(SUBDIRS)'; for subdir in $$list; do \
439 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
442 list='$(SUBDIRS)'; for subdir in $$list; do \
443 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
446 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
447 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
448 unique=`for i in $$list; do \
449 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
451 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
452 END { if (nonempty) { for (i in files) print i; }; }'`; \
456 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
457 $(TAGS_FILES) $(LISP)
460 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
461 include_option=--etags-include; \
464 include_option=--include; \
467 list='$(SUBDIRS)'; for subdir in $$list; do \
468 if test "$$subdir" = .; then :; else \
469 test ! -f $$subdir/TAGS || \
470 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
473 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
474 unique=`for i in $$list; do \
475 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
477 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
478 END { if (nonempty) { for (i in files) print i; }; }'`; \
480 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
481 test -n "$$unique" || unique=$$empty_fix; \
482 if test $$# -gt 0; then \
483 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
486 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
491 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
492 $(TAGS_FILES) $(LISP)
493 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
494 unique=`for i in $$list; do \
495 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
497 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
498 END { if (nonempty) { for (i in files) print i; }; }'`; \
499 test -z "$(CTAGS_ARGS)$$unique" \
500 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
504 here=`$(am__cd) $(top_builddir) && pwd` \
505 && $(am__cd) $(top_srcdir) \
506 && gtags -i $(GTAGS_ARGS) "$$here"
509 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
511 distdir: $(DISTFILES)
512 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
513 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
514 list='$(DISTFILES)'; \
515 dist_files=`for file in $$list; do echo $$file; done | \
516 sed -e "s|^$$srcdirstrip/||;t" \
517 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
518 case $$dist_files in \
519 */*) $(MKDIR_P) `echo "$$dist_files" | \
520 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
523 for file in $$dist_files; do \
524 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
525 if test -d $$d/$$file; then \
526 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
527 if test -d "$(distdir)/$$file"; then \
528 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
530 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
531 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
532 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
534 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
536 test -f "$(distdir)/$$file" \
537 || cp -p $$d/$$file "$(distdir)/$$file" \
541 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
542 if test "$$subdir" = .; then :; else \
543 test -d "$(distdir)/$$subdir" \
544 || $(MKDIR_P) "$(distdir)/$$subdir" \
548 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
549 if test "$$subdir" = .; then :; else \
550 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
552 new_distdir=$$reldir; \
553 dir1=$$subdir; dir2="$(top_distdir)"; \
555 new_top_distdir=$$reldir; \
556 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
557 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
558 ($(am__cd) $$subdir && \
559 $(MAKE) $(AM_MAKEFLAGS) \
560 top_distdir="$$new_top_distdir" \
561 distdir="$$new_distdir" \
562 am__remove_distdir=: \
563 am__skip_length_check=: \
564 am__skip_mode_fix=: \
570 $(MAKE) $(AM_MAKEFLAGS) check-local
571 check: check-recursive
573 installdirs: installdirs-recursive
575 install: install-recursive
576 install-exec: install-exec-recursive
577 install-data: install-data-recursive
578 uninstall: uninstall-recursive
581 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
583 installcheck: installcheck-recursive
585 if test -z '$(STRIP)'; then \
586 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
587 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
590 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
591 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
592 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
599 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
600 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
602 maintainer-clean-generic:
603 @echo "This command is intended for maintainers to use"
604 @echo "it deletes files that may require special tools to rebuild."
605 clean: clean-recursive
607 clean-am: clean-generic clean-libtool mostlyclean-am
609 distclean: distclean-recursive
611 distclean-am: clean-am distclean-generic distclean-tags
627 install-dvi: install-dvi-recursive
633 install-html: install-html-recursive
637 install-info: install-info-recursive
643 install-pdf: install-pdf-recursive
647 install-ps: install-ps-recursive
653 maintainer-clean: maintainer-clean-recursive
655 maintainer-clean-am: distclean-am maintainer-clean-generic
657 mostlyclean: mostlyclean-recursive
659 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
671 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
672 ctags-recursive install-am install-strip tags-recursive
674 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
675 all all-am check check-am check-local clean clean-generic \
676 clean-libtool ctags ctags-recursive distclean \
677 distclean-generic distclean-libtool distclean-tags distdir dvi \
678 dvi-am html html-am info info-am install install-am \
679 install-data install-data-am install-dvi install-dvi-am \
680 install-exec install-exec-am install-html install-html-am \
681 install-info install-info-am install-man install-pdf \
682 install-pdf-am install-ps install-ps-am install-strip \
683 installcheck installcheck-am installdirs installdirs-am \
684 maintainer-clean maintainer-clean-generic mostlyclean \
685 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
686 tags tags-recursive uninstall uninstall-am
688 # call as: $(XVFB_START) && someprogram
690 # test: run all tests in cwd and subdirs
692 @$(SKIP_GDKTARGET) || test -z "${TEST_PROGS}" || { \
693 $(XVFB_START) && { set -e; ${GTESTER} --verbose ${TEST_PROGS}; }; \
695 @ for subdir in $(SUBDIRS) ; do \
696 test "$$subdir" = "." -o "$$subdir" = "po" -o "$$subdir" = "po-properties" || \
697 ( cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $@ ) || exit $? ; \
699 # test-report: run tests in subdirs and generate report
700 # perf-report: run tests in subdirs with -m perf and generate report
701 # full-report: like test-report: with -m perf and -m slow
702 test-report perf-report full-report: ${TEST_PROGS}
703 @ ignore_logdir=true ; \
704 if test -z "$$GTESTER_LOGDIR" ; then \
705 GTESTER_LOGDIR=`mktemp -d "\`pwd\`/.testlogs-XXXXXX"`; export GTESTER_LOGDIR ; \
706 ignore_logdir=false ; \
708 for subdir in $(SUBDIRS) ; do \
709 test "$$subdir" = "." -o "$$subdir" = "po" -o "$$subdir" = "po-properties" || \
710 ( cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $@ ) || exit $? ; \
712 $(SKIP_GDKTARGET) || test -z "${TEST_PROGS}" || { \
714 test-report) test_options="-k";; \
715 perf-report) test_options="-k -m=perf";; \
716 full-report) test_options="-k -m=perf -m=slow";; \
720 if test -z "$$GTESTER_LOGDIR" ; then \
721 ${GTESTER} --verbose $$test_options -o test-report.xml ${TEST_PROGS} ; \
722 elif test -n "${TEST_PROGS}" ; then \
723 ${GTESTER} --verbose $$test_options -o `mktemp "$$GTESTER_LOGDIR/log-XXXXXX"` ${TEST_PROGS} ; \
727 $$ignore_logdir || { \
728 echo '<?xml version="1.0"?>' > $@.xml ; \
729 echo '<report-collection>' >> $@.xml ; \
730 for lf in `ls -L "$$GTESTER_LOGDIR"/.` ; do \
731 sed '1,1s/^<?xml\b[^>?]*?>//' <"$$GTESTER_LOGDIR"/"$$lf" >> $@.xml ; \
734 echo '</report-collection>' >> $@.xml ; \
735 rm -rf "$$GTESTER_LOGDIR"/ ; \
736 ${GTESTER_REPORT} --version 2>/dev/null 1>&2 ; test "$$?" != 0 || ${GTESTER_REPORT} $@.xml >$@.html ; \
738 .PHONY: test test-report perf-report full-report
739 # run make test as part of make check
742 -include $(top_srcdir)/git.mk
744 # Tell versions [3.59,3.63) of GNU make to not export all variables.
745 # Otherwise a system limit (for SysV at least) may be exceeded.