doc/reference/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # -*- mode: makefile -*-
  18
  19 ####################################
  20 # Everything below here is generic #
  21 ####################################
  22 VPATH = @srcdir@
  23 am__is_gnu_make = { \
  24   if test -z '$(MAKELEVEL)'; then \
  25     false; \
  26   elif test -n '$(MAKE_HOST)'; then \
  27     true; \
  28   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  29     true; \
  30   else \
  31     false; \
  32   fi; \
  33 }
  34 am__make_running_with_option = \
  35   case $${target_option-} in \
  36       ?) ;; \
  37       *) echo "am__make_running_with_option: internal error: invalid" \
  38               "target option '$${target_option-}' specified" >&2; \
  39          exit 1;; \
  40   esac; \
  41   has_opt=no; \
  42   sane_makeflags=$$MAKEFLAGS; \
  43   if $(am__is_gnu_make); then \
  44     sane_makeflags=$$MFLAGS; \
  45   else \
  46     case $$MAKEFLAGS in \
  47       *\\[\ \   ]*) \
  48         bs=\\; \
  49         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  50           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  51     esac; \
  52   fi; \
  53   skip_next=no; \
  54   strip_trailopt () \
  55   { \
  56     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  57   }; \
  58   for flg in $$sane_makeflags; do \
  59     test $$skip_next = yes && { skip_next=no; continue; }; \
  60     case $$flg in \
  61       *=*|--*) continue;; \
  62         -*I) strip_trailopt 'I'; skip_next=yes;; \
  63       -*I?*) strip_trailopt 'I';; \
  64         -*O) strip_trailopt 'O'; skip_next=yes;; \
  65       -*O?*) strip_trailopt 'O';; \
  66         -*l) strip_trailopt 'l'; skip_next=yes;; \
  67       -*l?*) strip_trailopt 'l';; \
  68       -[dEDm]) skip_next=yes;; \
  69       -[JT]) skip_next=yes;; \
  70     esac; \
  71     case $$flg in \
  72       *$$target_option*) has_opt=yes; break;; \
  73     esac; \
  74   done; \
  75   test $$has_opt = yes
  76 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  77 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  78 pkgdatadir = $(datadir)/@PACKAGE@
  79 pkgincludedir = $(includedir)/@PACKAGE@
  80 pkglibdir = $(libdir)/@PACKAGE@
  81 pkglibexecdir = $(libexecdir)/@PACKAGE@
  82 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  83 install_sh_DATA = $(install_sh) -c -m 644
  84 install_sh_PROGRAM = $(install_sh) -c
  85 install_sh_SCRIPT = $(install_sh) -c
  86 INSTALL_HEADER = $(INSTALL_DATA)
  87 transform = $(program_transform_name)
  88 NORMAL_INSTALL = :
  89 PRE_INSTALL = :
  90 POST_INSTALL = :
  91 NORMAL_UNINSTALL = :
  92 PRE_UNINSTALL = :
  93 POST_UNINSTALL = :
  94 build_triplet = @build@
  95 host_triplet = @host@
  96 @ENABLE_MAN_TRUE@am__append_1 = \
  97 @ENABLE_MAN_TRUE@       json-glib-format.1 \
  98 @ENABLE_MAN_TRUE@       json-glib-validate.1
  99
 100 subdir = doc/reference
 101 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 102 am__aclocal_m4_deps =  \
 103         $(top_srcdir)/build/autotools/as-compiler-flag.m4 \
 104         $(top_srcdir)/build/autotools/as-linguas.m4 \
 105         $(top_srcdir)/build/autotools/gettext.m4 \
 106         $(top_srcdir)/build/autotools/glibtests.m4 \
 107         $(top_srcdir)/build/autotools/gtk-doc.m4 \
 108         $(top_srcdir)/build/autotools/iconv.m4 \
 109         $(top_srcdir)/build/autotools/intlmacosx.m4 \
 110         $(top_srcdir)/build/autotools/introspection.m4 \
 111         $(top_srcdir)/build/autotools/jh-catalog.m4 \
 112         $(top_srcdir)/build/autotools/lib-ld.m4 \
 113         $(top_srcdir)/build/autotools/lib-link.m4 \
 114         $(top_srcdir)/build/autotools/lib-prefix.m4 \
 115         $(top_srcdir)/build/autotools/libtool.m4 \
 116         $(top_srcdir)/build/autotools/ltoptions.m4 \
 117         $(top_srcdir)/build/autotools/ltsugar.m4 \
 118         $(top_srcdir)/build/autotools/ltversion.m4 \
 119         $(top_srcdir)/build/autotools/lt~obsolete.m4 \
 120         $(top_srcdir)/build/autotools/nls.m4 \
 121         $(top_srcdir)/build/autotools/po.m4 \
 122         $(top_srcdir)/build/autotools/progtest.m4 \
 123         $(top_srcdir)/configure.ac
 124 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 125         $(ACLOCAL_M4)
 126 DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 127 mkinstalldirs = $(install_sh) -d
 128 CONFIG_HEADER = $(top_builddir)/config.h
 129 CONFIG_CLEAN_FILES = version.xml
 130 CONFIG_CLEAN_VPATH_FILES =
 131 AM_V_P = $(am__v_P_@AM_V@)
 132 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 133 am__v_P_0 = false
 134 am__v_P_1 = :
 135 AM_V_GEN = $(am__v_GEN_@AM_V@)
 136 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 137 am__v_GEN_0 = @echo "  GEN     " $@;
 138 am__v_GEN_1 =
 139 AM_V_at = $(am__v_at_@AM_V@)
 140 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 141 am__v_at_0 = @
 142 am__v_at_1 =
 143 SOURCES =
 144 DIST_SOURCES =
 145 am__can_run_installinfo = \
 146   case $$AM_UPDATE_INFO_DIR in \
 147     n|no|NO) false;; \
 148     *) (install-info --version) >/dev/null 2>&1;; \
 149   esac
 150 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 151 am__vpath_adj = case $$p in \
 152     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 153     *) f=$$p;; \
 154   esac;
 155 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 156 am__install_max = 40
 157 am__nobase_strip_setup = \
 158   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 159 am__nobase_strip = \
 160   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 161 am__nobase_list = $(am__nobase_strip_setup); \
 162   for p in $$list; do echo "$$p $$p"; done | \
 163   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 164   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 165     if (++n[$$2] == $(am__install_max)) \
 166       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 167     END { for (dir in files) print dir, files[dir] }'
 168 am__base_list = \
 169   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 170   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 171 am__uninstall_files_from_dir = { \
 172   test -z "$$files" \
 173     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 174     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 175          $(am__cd) "$$dir" && rm -f $$files; }; \
 176   }
 177 man1dir = $(mandir)/man1
 178 am__installdirs = "$(DESTDIR)$(man1dir)"
 179 NROFF = nroff
 180 MANS = $(man_MANS)
 181 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 182 am__tty_colors_dummy = \
 183   mgn= red= grn= lgn= blu= brg= std=; \
 184   am__color_tests=no
 185 am__tty_colors = { \
 186   $(am__tty_colors_dummy); \
 187   if test "X$(AM_COLOR_TESTS)" = Xno; then \
 188     am__color_tests=no; \
 189   elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
 190     am__color_tests=yes; \
 191   elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
 192     am__color_tests=yes; \
 193   fi; \
 194   if test $$am__color_tests = yes; then \
 195     red='\e[0;31m'; \
 196     grn='\e[0;32m'; \
 197     lgn='\e[1;32m'; \
 198     blu='\e[1;34m'; \
 199     mgn='\e[0;35m'; \
 200     brg='\e[1m'; \
 201     std='\e[m'; \
 202   fi; \
 203 }
 204 am__recheck_rx = ^[     ]*:recheck:[    ]*
 205 am__global_test_result_rx = ^[  ]*:global-test-result:[         ]*
 206 am__copy_in_global_log_rx = ^[  ]*:copy-in-global-log:[         ]*
 207 # A command that, given a newline-separated list of test names on the
 208 # standard input, print the name of the tests that are to be re-run
 209 # upon "make recheck".
 210 am__list_recheck_tests = $(AWK) '{ \
 211   recheck = 1; \
 212   while ((rc = (getline line < ($$0 ".trs"))) != 0) \
 213     { \
 214       if (rc < 0) \
 215         { \
 216           if ((getline line2 < ($$0 ".log")) < 0) \
 217             recheck = 0; \
 218           break; \
 219         } \
 220       else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
 221         { \
 222           recheck = 0; \
 223           break; \
 224         } \
 225       else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
 226         { \
 227           break; \
 228         } \
 229     }; \
 230   if (recheck) \
 231     print $$0; \
 232   close ($$0 ".trs"); \
 233   close ($$0 ".log"); \
 234 }'
 235 # A command that, given a newline-separated list of test names on the
 236 # standard input, create the global log from their .trs and .log files.
 237 am__create_global_log = $(AWK) ' \
 238 function fatal(msg) \
 239 { \
 240   print "fatal: making $@: " msg | "cat >&2"; \
 241   exit 1; \
 242 } \
 243 function rst_section(header) \
 244 { \
 245   print header; \
 246   len = length(header); \
 247   for (i = 1; i <= len; i = i + 1) \
 248     printf "="; \
 249   printf "\n\n"; \
 250 } \
 251 { \
 252   copy_in_global_log = 1; \
 253   global_test_result = "RUN"; \
 254   while ((rc = (getline line < ($$0 ".trs"))) != 0) \
 255     { \
 256       if (rc < 0) \
 257          fatal("failed to read from " $$0 ".trs"); \
 258       if (line ~ /$(am__global_test_result_rx)/) \
 259         { \
 260           sub("$(am__global_test_result_rx)", "", line); \
 261           sub("[        ]*$$", "", line); \
 262           global_test_result = line; \
 263         } \
 264       else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
 265         copy_in_global_log = 0; \
 266     }; \
 267   if (copy_in_global_log) \
 268     { \
 269       rst_section(global_test_result ": " $$0); \
 270       while ((rc = (getline line < ($$0 ".log"))) != 0) \
 271       { \
 272         if (rc < 0) \
 273           fatal("failed to read from " $$0 ".log"); \
 274         print line; \
 275       }; \
 276       printf "\n"; \
 277     }; \
 278   close ($$0 ".trs"); \
 279   close ($$0 ".log"); \
 280 }'
 281 # Restructured Text title.
 282 am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
 283 # Solaris 10 'make', and several other traditional 'make' implementations,
 284 # pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
 285 # by disabling -e (using the XSI extension "set +e") if it's set.
 286 am__sh_e_setup = case $$- in *e*) set +e;; esac
 287 # Default flags passed to test drivers.
 288 am__common_driver_flags = \
 289   --color-tests "$$am__color_tests" \
 290   --enable-hard-errors "$$am__enable_hard_errors" \
 291   --expect-failure "$$am__expect_failure"
 292 # To be inserted before the command running the test.  Creates the
 293 # directory for the log if needed.  Stores in $dir the directory
 294 # containing $f, in $tst the test, in $log the log.  Executes the
 295 # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
 296 # passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
 297 # will run the test scripts (or their associated LOG_COMPILER, if
 298 # thy have one).
 299 am__check_pre = \
 300 $(am__sh_e_setup);                                      \
 301 $(am__vpath_adj_setup) $(am__vpath_adj)                 \
 302 $(am__tty_colors);                                      \
 303 srcdir=$(srcdir); export srcdir;                        \
 304 case "$@" in                                            \
 305   */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;    \
 306     *) am__odir=.;;                                     \
 307 esac;                                                   \
 308 test "x$$am__odir" = x"." || test -d "$$am__odir"       \
 309   || $(MKDIR_P) "$$am__odir" || exit $$?;               \
 310 if test -f "./$$f"; then dir=./;                        \
 311 elif test -f "$$f"; then dir=;                          \
 312 else dir="$(srcdir)/"; fi;                              \
 313 tst=$$dir$$f; log='$@';                                 \
 314 if test -n '$(DISABLE_HARD_ERRORS)'; then               \
 315   am__enable_hard_errors=no;                            \
 316 else                                                    \
 317   am__enable_hard_errors=yes;                           \
 318 fi;                                                     \
 319 case " $(XFAIL_TESTS) " in                              \
 320   *[\ \ ]$$f[\ \        ]* | *[\ \      ]$$dir$$f[\ \   ]*) \
 321     am__expect_failure=yes;;                            \
 322   *)                                                    \
 323     am__expect_failure=no;;                             \
 324 esac;                                                   \
 325 $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
 326 # A shell command to get the names of the tests scripts with any registered
 327 # extension removed (i.e., equivalently, the names of the test logs, with
 328 # the '.log' extension removed).  The result is saved in the shell variable
 329 # '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
 330 # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
 331 # since that might cause problem with VPATH rewrites for suffix-less tests.
 332 # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
 333 am__set_TESTS_bases = \
 334   bases='$(TEST_LOGS)'; \
 335   bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
 336   bases=`echo $$bases`
 337 RECHECK_LOGS = $(TEST_LOGS)
 338 AM_RECURSIVE_TARGETS = check recheck
 339 TEST_SUITE_LOG = test-suite.log
 340 TEST_EXTENSIONS = @EXEEXT@ .test
 341 am__test_logs1 = $(TESTS:=.log)
 342 am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
 343 TEST_LOGS = $(am__test_logs2:.test.log=.log)
 344 TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/build/test-driver
 345 TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
 346         $(TEST_LOG_FLAGS)
 347 am__set_b = \
 348   case '$@' in \
 349     */*) \
 350       case '$*' in \
 351         */*) b='$*';; \
 352           *) b=`echo '$@' | sed 's/\.log$$//'`; \
 353        esac;; \
 354     *) \
 355       b='$*';; \
 356   esac
 357 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/version.xml.in \
 358         $(top_srcdir)/build/test-driver $(top_srcdir)/gtk-doc.make
 359 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 360 ACLOCAL = @ACLOCAL@
 361 ALL_LINGUAS = @ALL_LINGUAS@
 362 AMTAR = @AMTAR@
 363 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 364 AR = @AR@
 365 AUTOCONF = @AUTOCONF@
 366 AUTOHEADER = @AUTOHEADER@
 367 AUTOMAKE = @AUTOMAKE@
 368 AWK = @AWK@
 369 CC = @CC@
 370 CCDEPMODE = @CCDEPMODE@
 371 CFLAGS = @CFLAGS@
 372 CPP = @CPP@
 373 CPPFLAGS = @CPPFLAGS@
 374 CYGPATH_W = @CYGPATH_W@
 375 DEFS = @DEFS@
 376 DEPDIR = @DEPDIR@
 377 DLLTOOL = @DLLTOOL@
 378 DSYMUTIL = @DSYMUTIL@
 379 DUMPBIN = @DUMPBIN@
 380 ECHO_C = @ECHO_C@
 381 ECHO_N = @ECHO_N@
 382 ECHO_T = @ECHO_T@
 383 EGREP = @EGREP@
 384 EXEEXT = @EXEEXT@
 385 FGREP = @FGREP@
 386 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 387 GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
 388 GLIB_CFLAGS = @GLIB_CFLAGS@
 389 GLIB_COMPILE_RESOURCES = @GLIB_COMPILE_RESOURCES@
 390 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
 391 GLIB_LIBS = @GLIB_LIBS@
 392 GLIB_MKENUMS = @GLIB_MKENUMS@
 393 GLIB_PREFIX = @GLIB_PREFIX@
 394 GMSGFMT = @GMSGFMT@
 395 GMSGFMT_015 = @GMSGFMT_015@
 396 GOBJECT_QUERY = @GOBJECT_QUERY@
 397 GREP = @GREP@
 398 GTKDOC_CHECK = @GTKDOC_CHECK@
 399 GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@
 400 GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
 401 GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
 402 GTKDOC_MKPDF = @GTKDOC_MKPDF@
 403 GTKDOC_REBASE = @GTKDOC_REBASE@
 404 HTML_DIR = @HTML_DIR@
 405 INSTALL = @INSTALL@
 406 INSTALL_DATA = @INSTALL_DATA@
 407 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 408 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 409 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 410 INTLLIBS = @INTLLIBS@
 411 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 412 INTROSPECTION_CFLAGS = @INTROSPECTION_CFLAGS@
 413 INTROSPECTION_COMPILER = @INTROSPECTION_COMPILER@
 414 INTROSPECTION_GENERATE = @INTROSPECTION_GENERATE@
 415 INTROSPECTION_GIRDIR = @INTROSPECTION_GIRDIR@
 416 INTROSPECTION_LIBS = @INTROSPECTION_LIBS@
 417 INTROSPECTION_MAKEFILE = @INTROSPECTION_MAKEFILE@
 418 INTROSPECTION_SCANNER = @INTROSPECTION_SCANNER@
 419 INTROSPECTION_TYPELIBDIR = @INTROSPECTION_TYPELIBDIR@
 420 JSON_CFLAGS = @JSON_CFLAGS@
 421 JSON_DEBUG_CFLAGS = @JSON_DEBUG_CFLAGS@
 422 JSON_GCOV_CFLAGS = @JSON_GCOV_CFLAGS@
 423 JSON_GCOV_LDADD = @JSON_GCOV_LDADD@
 424 JSON_HIDDEN_VISIBILITY_CFLAGS = @JSON_HIDDEN_VISIBILITY_CFLAGS@
 425 JSON_LIBS = @JSON_LIBS@
 426 JSON_LT_LDFLAGS = @JSON_LT_LDFLAGS@
 427 JSON_MAJOR_VERSION = @JSON_MAJOR_VERSION@
 428 JSON_MICRO_VERSION = @JSON_MICRO_VERSION@
 429 JSON_MINOR_VERSION = @JSON_MINOR_VERSION@
 430 JSON_RELEASE_STATUS = @JSON_RELEASE_STATUS@
 431 JSON_VERSION = @JSON_VERSION@
 432 LD = @LD@
 433 LDFLAGS = @LDFLAGS@
 434 LIBICONV = @LIBICONV@
 435 LIBINTL = @LIBINTL@
 436 LIBOBJS = @LIBOBJS@
 437 LIBS = @LIBS@
 438 LIBTOOL = @LIBTOOL@
 439 LIPO = @LIPO@
 440 LN_S = @LN_S@
 441 LTLIBICONV = @LTLIBICONV@
 442 LTLIBINTL = @LTLIBINTL@
 443 LTLIBOBJS = @LTLIBOBJS@
 444 LTP = @LTP@
 445 LTP_GENHTML = @LTP_GENHTML@
 446 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 447 MAINTAINER_CFLAGS = @MAINTAINER_CFLAGS@
 448 MAKEINFO = @MAKEINFO@
 449 MANIFEST_TOOL = @MANIFEST_TOOL@
 450 MKDIR_P = @MKDIR_P@
 451 MSGFMT = @MSGFMT@
 452 MSGFMT_015 = @MSGFMT_015@
 453 MSGMERGE = @MSGMERGE@
 454 NM = @NM@
 455 NMEDIT = @NMEDIT@
 456 OBJDUMP = @OBJDUMP@
 457 OBJEXT = @OBJEXT@
 458 OTOOL = @OTOOL@
 459 OTOOL64 = @OTOOL64@
 460 PACKAGE = @PACKAGE@
 461 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 462 PACKAGE_NAME = @PACKAGE_NAME@
 463 PACKAGE_STRING = @PACKAGE_STRING@
 464 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 465 PACKAGE_URL = @PACKAGE_URL@
 466 PACKAGE_VERSION = @PACKAGE_VERSION@
 467 PATH_SEPARATOR = @PATH_SEPARATOR@
 468 PKG_CONFIG = @PKG_CONFIG@
 469 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
 470 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
 471 POSUB = @POSUB@
 472 RANLIB = @RANLIB@
 473 SED = @SED@
 474 SET_MAKE = @SET_MAKE@
 475 SHELL = @SHELL@
 476 SHTOOL = @SHTOOL@
 477 STRIP = @STRIP@
 478 USE_NLS = @USE_NLS@
 479 VERSION = @VERSION@
 480 XGETTEXT = @XGETTEXT@
 481 XGETTEXT_015 = @XGETTEXT_015@
 482 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
 483 XMLCATALOG = @XMLCATALOG@
 484 XML_CATALOG_FILE = @XML_CATALOG_FILE@
 485 XSLTPROC = @XSLTPROC@
 486 abs_builddir = @abs_builddir@
 487 abs_srcdir = @abs_srcdir@
 488 abs_top_builddir = @abs_top_builddir@
 489 abs_top_srcdir = @abs_top_srcdir@
 490 ac_ct_AR = @ac_ct_AR@
 491 ac_ct_CC = @ac_ct_CC@
 492 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 493 am__include = @am__include@
 494 am__leading_dot = @am__leading_dot@
 495 am__quote = @am__quote@
 496 am__tar = @am__tar@
 497 am__untar = @am__untar@
 498 bindir = @bindir@
 499 build = @build@
 500 build_alias = @build_alias@
 501 build_cpu = @build_cpu@
 502 build_os = @build_os@
 503 build_vendor = @build_vendor@
 504 builddir = @builddir@
 505 datadir = @datadir@
 506 datarootdir = @datarootdir@
 507 docdir = @docdir@
 508 dvidir = @dvidir@
 509 exec_prefix = @exec_prefix@
 510 host = @host@
 511 host_alias = @host_alias@
 512 host_cpu = @host_cpu@
 513 host_os = @host_os@
 514 host_vendor = @host_vendor@
 515 htmldir = @htmldir@
 516 includedir = @includedir@
 517 infodir = @infodir@
 518 install_sh = @install_sh@
 519 installed_test_metadir = @installed_test_metadir@
 520 installed_testdir = @installed_testdir@
 521 libdir = @libdir@
 522 libexecdir = @libexecdir@
 523 localedir = @localedir@
 524 localstatedir = @localstatedir@
 525 mandir = @mandir@
 526 mkdir_p = @mkdir_p@
 527 oldincludedir = @oldincludedir@
 528 pdfdir = @pdfdir@
 529 prefix = @prefix@
 530 program_transform_name = @program_transform_name@
 531 psdir = @psdir@
 532 sbindir = @sbindir@
 533 sharedstatedir = @sharedstatedir@
 534 srcdir = @srcdir@
 535 sysconfdir = @sysconfdir@
 536 target_alias = @target_alias@
 537 top_build_prefix = @top_build_prefix@
 538 top_builddir = @top_builddir@
 539 top_srcdir = @top_srcdir@
 540 DOC_MODULE = json-glib
 541 DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml
 542 DOC_SOURCE_DIR = $(top_srcdir)/json-glib $(top_builddir)/json-glib
 543 SCANGOBJ_OPTIONS =
 544 SCAN_OPTIONS = --deprecated-guards="JSON_DISABLE_DEPRECATED" --rebuild-types
 545 MKDB_OPTIONS = --output-format=xml --name-space=json
 546 MKTMPL_OPTIONS =
 547 FIXXREF_OPTIONS = \
 548         --extra-dir=$(GLIB_PREFIX)/share/gtk-doc/html/glib \
 549         --extra-dir=$(GLIB_PREFIX)/share/gtk-doc/html/gobject \
 550         --extra-dir=$(GLIB_PREFIX)/share/gtk-doc/html/gio
 551
 552 HFILE_GLOB = $(top_srcdir)/json-glib/*.h $(top_builddir)/json-glib/*.h
 553 CFILE_GLOB = $(top_srcdir)/json-glib/*.c
 554 IGNORE_HFILES = \
 555         json-scanner.h          \
 556         json-types-private.h    \
 557         json-gobject-private.h  \
 558         json-private.h          \
 559         json-marshal.h          \
 560         json-glib.h             \
 561         json-enum-types.h       \
 562         json-debug.h
 563
 564 EXTRA_HFILES =
 565 HTML_IMAGES =
 566 content_files = \
 567         json-glib-format.xml \
 568         json-glib-validate.xml \
 569         version.xml
 570
 571 expand_content_files =
 572 AM_CPPFLAGS = -I$(top_srcdir) -I$(top_builddir) $(JSON_CFLAGS)
 573 GTKDOC_LIBS = $(top_builddir)/json-glib/libjson-glib-1.0.la $(JSON_LIBS)
 574 @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 575 @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(GTKDOC_DEPS_CFLAGS) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 576 @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
 577 @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(GTKDOC_DEPS_LIBS) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS)
 578 @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_RUN =
 579 @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_RUN = $(LIBTOOL) --mode=execute
 580
 581 # We set GPATH here; this gives us semantics for GNU make
 582 # which are more like other make's VPATH, when it comes to
 583 # whether a source that is a target of one rule is then
 584 # searched for in VPATH/GPATH.
 585 #
 586 GPATH = $(srcdir)
 587 TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
 588 SETUP_FILES = \
 589         $(content_files)                \
 590         $(expand_content_files)         \
 591         $(DOC_MAIN_SGML_FILE)           \
 592         $(DOC_MODULE)-sections.txt      \
 593         $(DOC_MODULE)-overrides.txt
 594
 595 EXTRA_DIST = $(HTML_IMAGES) $(SETUP_FILES) version.xml.in $(man_MANS)
 596 DOC_STAMPS = setup-build.stamp scan-build.stamp sgml-build.stamp \
 597         html-build.stamp pdf-build.stamp \
 598         sgml.stamp html.stamp pdf.stamp
 599
 600 SCANOBJ_FILES = \
 601         $(DOC_MODULE).args       \
 602         $(DOC_MODULE).hierarchy  \
 603         $(DOC_MODULE).interfaces \
 604         $(DOC_MODULE).prerequisites \
 605         $(DOC_MODULE).signals
 606
 607 REPORT_FILES = \
 608         $(DOC_MODULE)-undocumented.txt \
 609         $(DOC_MODULE)-undeclared.txt \
 610         $(DOC_MODULE)-unused.txt
 611
 612 CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) \
 613         gtkdoc-check.test $(man_MANS)
 614 @GTK_DOC_BUILD_HTML_FALSE@HTML_BUILD_STAMP =
 615 @GTK_DOC_BUILD_HTML_TRUE@HTML_BUILD_STAMP = html-build.stamp
 616 @GTK_DOC_BUILD_PDF_FALSE@PDF_BUILD_STAMP =
 617 @GTK_DOC_BUILD_PDF_TRUE@PDF_BUILD_STAMP = pdf-build.stamp
 618
 619 #### setup ####
 620 GTK_DOC_V_SETUP = $(GTK_DOC_V_SETUP_$(V))
 621 GTK_DOC_V_SETUP_ = $(GTK_DOC_V_SETUP_$(AM_DEFAULT_VERBOSITY))
 622 GTK_DOC_V_SETUP_0 = @echo "  DOC   Preparing build";
 623
 624 #### scan ####
 625 GTK_DOC_V_SCAN = $(GTK_DOC_V_SCAN_$(V))
 626 GTK_DOC_V_SCAN_ = $(GTK_DOC_V_SCAN_$(AM_DEFAULT_VERBOSITY))
 627 GTK_DOC_V_SCAN_0 = @echo "  DOC   Scanning header files";
 628 GTK_DOC_V_INTROSPECT = $(GTK_DOC_V_INTROSPECT_$(V))
 629 GTK_DOC_V_INTROSPECT_ = $(GTK_DOC_V_INTROSPECT_$(AM_DEFAULT_VERBOSITY))
 630 GTK_DOC_V_INTROSPECT_0 = @echo "  DOC   Introspecting gobjects";
 631
 632 #### xml ####
 633 GTK_DOC_V_XML = $(GTK_DOC_V_XML_$(V))
 634 GTK_DOC_V_XML_ = $(GTK_DOC_V_XML_$(AM_DEFAULT_VERBOSITY))
 635 GTK_DOC_V_XML_0 = @echo "  DOC   Building XML";
 636
 637 #### html ####
 638 GTK_DOC_V_HTML = $(GTK_DOC_V_HTML_$(V))
 639 GTK_DOC_V_HTML_ = $(GTK_DOC_V_HTML_$(AM_DEFAULT_VERBOSITY))
 640 GTK_DOC_V_HTML_0 = @echo "  DOC   Building HTML";
 641 GTK_DOC_V_XREF = $(GTK_DOC_V_XREF_$(V))
 642 GTK_DOC_V_XREF_ = $(GTK_DOC_V_XREF_$(AM_DEFAULT_VERBOSITY))
 643 GTK_DOC_V_XREF_0 = @echo "  DOC   Fixing cross-references";
 644
 645 #### pdf ####
 646 GTK_DOC_V_PDF = $(GTK_DOC_V_PDF_$(V))
 647 GTK_DOC_V_PDF_ = $(GTK_DOC_V_PDF_$(AM_DEFAULT_VERBOSITY))
 648 GTK_DOC_V_PDF_0 = @echo "  DOC   Building PDF";
 649 man_MANS = $(am__append_1)
 650 @ENABLE_GTK_DOC_TRUE@TESTS_ENVIRONMENT = \
 651 @ENABLE_GTK_DOC_TRUE@   DOC_MODULE=$(DOC_MODULE) \
 652 @ENABLE_GTK_DOC_TRUE@   DOC_MAIN_SGML_FILE=$(DOC_MAIN_SGML_FILE) \
 653 @ENABLE_GTK_DOC_TRUE@   SRCDIR=$(abs_srcdir) \
 654 @ENABLE_GTK_DOC_TRUE@   BUILDDIR=$(abs_builddir)
 655
 656 @ENABLE_GTK_DOC_TRUE@TESTS = $(GTKDOC_CHECK)
 657 @ENABLE_MAN_TRUE@XSLTPROC_FLAGS = \
 658 @ENABLE_MAN_TRUE@       --nonet \
 659 @ENABLE_MAN_TRUE@       --stringparam man.output.quietly 1 \
 660 @ENABLE_MAN_TRUE@       --stringparam funcsynopsis.style ansi \
 661 @ENABLE_MAN_TRUE@       --stringparam man.th.extra1.suppress 1 \
 662 @ENABLE_MAN_TRUE@       --stringparam man.authors.section.enabled 0 \
 663 @ENABLE_MAN_TRUE@       --stringparam man.copyright.section.enabled 0
 664
 665 all: all-am
 666
 667 .SUFFIXES:
 668 .SUFFIXES: .1 .log .test .test$(EXEEXT) .trs .xml
 669 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
 670         @for dep in $?; do \
 671           case '$(am__configure_deps)' in \
 672             *$$dep*) \
 673               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 674                 && { if test -f $@; then exit 0; else break; fi; }; \
 675               exit 1;; \
 676           esac; \
 677         done; \
 678         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/reference/Makefile'; \
 679         $(am__cd) $(top_srcdir) && \
 680           $(AUTOMAKE) --foreign doc/reference/Makefile
 681 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 682         @case '$?' in \
 683           *config.status*) \
 684             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 685           *) \
 686             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 687             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 688         esac;
 689 $(top_srcdir)/gtk-doc.make $(am__empty):
 690
 691 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 692         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 693
 694 $(top_srcdir)/configure:  $(am__configure_deps)
 695         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 696 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 697         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 698 $(am__aclocal_m4_deps):
 699 version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
 700         cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 701
 702 mostlyclean-libtool:
 703         -rm -f *.lo
 704
 705 clean-libtool:
 706         -rm -rf .libs _libs
 707 install-man1: $(man_MANS)
 708         @$(NORMAL_INSTALL)
 709         @list1=''; \
 710         list2='$(man_MANS)'; \
 711         test -n "$(man1dir)" \
 712           && test -n "`echo $$list1$$list2`" \
 713           || exit 0; \
 714         echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
 715         $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
 716         { for i in $$list1; do echo "$$i"; done;  \
 717         if test -n "$$list2"; then \
 718           for i in $$list2; do echo "$$i"; done \
 719             | sed -n '/\.1[a-z]*$$/p'; \
 720         fi; \
 721         } | while read p; do \
 722           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 723           echo "$$d$$p"; echo "$$p"; \
 724         done | \
 725         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 726               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 727         sed 'N;N;s,\n, ,g' | { \
 728         list=; while read file base inst; do \
 729           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 730             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 731             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 732           fi; \
 733         done; \
 734         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 735         while read files; do \
 736           test -z "$$files" || { \
 737             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 738             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 739         done; }
 740
 741 uninstall-man1:
 742         @$(NORMAL_UNINSTALL)
 743         @list=''; test -n "$(man1dir)" || exit 0; \
 744         files=`{ for i in $$list; do echo "$$i"; done; \
 745         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 746           sed -n '/\.1[a-z]*$$/p'; \
 747         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 748               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 749         dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 750 tags TAGS:
 751
 752 ctags CTAGS:
 753
 754 cscope cscopelist:
 755
 756
 757 # Recover from deleted '.trs' file; this should ensure that
 758 # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
 759 # both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
 760 # to avoid problems with "make -n".
 761 .log.trs:
 762         rm -f $< $@
 763         $(MAKE) $(AM_MAKEFLAGS) $<
 764
 765 # Leading 'am--fnord' is there to ensure the list of targets does not
 766 # expand to empty, as could happen e.g. with make check TESTS=''.
 767 am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
 768 am--force-recheck:
 769         @:
 770
 771 $(TEST_SUITE_LOG): $(TEST_LOGS)
 772         @$(am__set_TESTS_bases); \
 773         am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
 774         redo_bases=`for i in $$bases; do \
 775                       am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
 776                     done`; \
 777         if test -n "$$redo_bases"; then \
 778           redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
 779           redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
 780           if $(am__make_dryrun); then :; else \
 781             rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
 782           fi; \
 783         fi; \
 784         if test -n "$$am__remaking_logs"; then \
 785           echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 786                "recursion detected" >&2; \
 787         elif test -n "$$redo_logs"; then \
 788           am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 789         fi; \
 790         if $(am__make_dryrun); then :; else \
 791           st=0;  \
 792           errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
 793           for i in $$redo_bases; do \
 794             test -f $$i.trs && test -r $$i.trs \
 795               || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
 796             test -f $$i.log && test -r $$i.log \
 797               || { echo "$$errmsg $$i.log" >&2; st=1; }; \
 798           done; \
 799           test $$st -eq 0 || exit 1; \
 800         fi
 801         @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
 802         ws='[   ]'; \
 803         results=`for b in $$bases; do echo $$b.trs; done`; \
 804         test -n "$$results" || results=/dev/null; \
 805         all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
 806         pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
 807         fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
 808         skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
 809         xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
 810         xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
 811         error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
 812         if test `expr $$fail + $$xpass + $$error` -eq 0; then \
 813           success=true; \
 814         else \
 815           success=false; \
 816         fi; \
 817         br='==================='; br=$$br$$br$$br$$br; \
 818         result_count () \
 819         { \
 820             if test x"$$1" = x"--maybe-color"; then \
 821               maybe_colorize=yes; \
 822             elif test x"$$1" = x"--no-color"; then \
 823               maybe_colorize=no; \
 824             else \
 825               echo "$@: invalid 'result_count' usage" >&2; exit 4; \
 826             fi; \
 827             shift; \
 828             desc=$$1 count=$$2; \
 829             if test $$maybe_colorize = yes && test $$count -gt 0; then \
 830               color_start=$$3 color_end=$$std; \
 831             else \
 832               color_start= color_end=; \
 833             fi; \
 834             echo "$${color_start}# $$desc $$count$${color_end}"; \
 835         }; \
 836         create_testsuite_report () \
 837         { \
 838           result_count $$1 "TOTAL:" $$all   "$$brg"; \
 839           result_count $$1 "PASS: " $$pass  "$$grn"; \
 840           result_count $$1 "SKIP: " $$skip  "$$blu"; \
 841           result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
 842           result_count $$1 "FAIL: " $$fail  "$$red"; \
 843           result_count $$1 "XPASS:" $$xpass "$$red"; \
 844           result_count $$1 "ERROR:" $$error "$$mgn"; \
 845         }; \
 846         {                                                               \
 847           echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |       \
 848             $(am__rst_title);                                           \
 849           create_testsuite_report --no-color;                           \
 850           echo;                                                         \
 851           echo ".. contents:: :depth: 2";                               \
 852           echo;                                                         \
 853           for b in $$bases; do echo $$b; done                           \
 854             | $(am__create_global_log);                                 \
 855         } >$(TEST_SUITE_LOG).tmp || exit 1;                             \
 856         mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);                     \
 857         if $$success; then                                              \
 858           col="$$grn";                                                  \
 859          else                                                           \
 860           col="$$red";                                                  \
 861           test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);               \
 862         fi;                                                             \
 863         echo "$${col}$$br$${std}";                                      \
 864         echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";   \
 865         echo "$${col}$$br$${std}";                                      \
 866         create_testsuite_report --maybe-color;                          \
 867         echo "$$col$$br$$std";                                          \
 868         if $$success; then :; else                                      \
 869           echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";         \
 870           if test -n "$(PACKAGE_BUGREPORT)"; then                       \
 871             echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
 872           fi;                                                           \
 873           echo "$$col$$br$$std";                                        \
 874         fi;                                                             \
 875         $$success || exit 1
 876
 877 check-TESTS:
 878         @list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
 879         @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
 880         @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 881         @set +e; $(am__set_TESTS_bases); \
 882         log_list=`for i in $$bases; do echo $$i.log; done`; \
 883         trs_list=`for i in $$bases; do echo $$i.trs; done`; \
 884         log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
 885         $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
 886         exit $$?;
 887 recheck: all
 888         @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 889         @set +e; $(am__set_TESTS_bases); \
 890         bases=`for i in $$bases; do echo $$i; done \
 891                  | $(am__list_recheck_tests)` || exit 1; \
 892         log_list=`for i in $$bases; do echo $$i.log; done`; \
 893         log_list=`echo $$log_list`; \
 894         $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
 895                 am__force_recheck=am--force-recheck \
 896                 TEST_LOGS="$$log_list"; \
 897         exit $$?
 898 .test.log:
 899         @p='$<'; \
 900         $(am__set_b); \
 901         $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
 902         --log-file $$b.log --trs-file $$b.trs \
 903         $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
 904         "$$tst" $(AM_TESTS_FD_REDIRECT)
 905 @am__EXEEXT_TRUE@.test$(EXEEXT).log:
 906 @am__EXEEXT_TRUE@       @p='$<'; \
 907 @am__EXEEXT_TRUE@       $(am__set_b); \
 908 @am__EXEEXT_TRUE@       $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
 909 @am__EXEEXT_TRUE@       --log-file $$b.log --trs-file $$b.trs \
 910 @am__EXEEXT_TRUE@       $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
 911 @am__EXEEXT_TRUE@       "$$tst" $(AM_TESTS_FD_REDIRECT)
 912
 913 distdir: $(DISTFILES)
 914         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 915         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 916         list='$(DISTFILES)'; \
 917           dist_files=`for file in $$list; do echo $$file; done | \
 918           sed -e "s|^$$srcdirstrip/||;t" \
 919               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 920         case $$dist_files in \
 921           */*) $(MKDIR_P) `echo "$$dist_files" | \
 922                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 923                            sort -u` ;; \
 924         esac; \
 925         for file in $$dist_files; do \
 926           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 927           if test -d $$d/$$file; then \
 928             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 929             if test -d "$(distdir)/$$file"; then \
 930               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 931             fi; \
 932             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 933               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 934               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 935             fi; \
 936             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 937           else \
 938             test -f "$(distdir)/$$file" \
 939             || cp -p $$d/$$file "$(distdir)/$$file" \
 940             || exit 1; \
 941           fi; \
 942         done
 943         $(MAKE) $(AM_MAKEFLAGS) \
 944           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 945           dist-hook
 946 check-am: all-am
 947         $(MAKE) $(AM_MAKEFLAGS) check-TESTS
 948 check: check-am
 949 @ENABLE_GTK_DOC_FALSE@all-local:
 950 all-am: Makefile $(MANS) all-local
 951 installdirs:
 952         for dir in "$(DESTDIR)$(man1dir)"; do \
 953           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 954         done
 955 install: install-am
 956 install-exec: install-exec-am
 957 install-data: install-data-am
 958 uninstall: uninstall-am
 959
 960 install-am: all-am
 961         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 962
 963 installcheck: installcheck-am
 964 install-strip:
 965         if test -z '$(STRIP)'; then \
 966           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 967             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 968               install; \
 969         else \
 970           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 971             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 972             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 973         fi
 974 mostlyclean-generic:
 975         -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
 976         -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
 977         -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 978
 979 clean-generic:
 980         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 981
 982 distclean-generic:
 983         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 984         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 985
 986 maintainer-clean-generic:
 987         @echo "This command is intended for maintainers to use"
 988         @echo "it deletes files that may require special tools to rebuild."
 989 clean: clean-am
 990
 991 clean-am: clean-generic clean-libtool clean-local mostlyclean-am
 992
 993 distclean: distclean-am
 994         -rm -f Makefile
 995 distclean-am: clean-am distclean-generic distclean-local
 996
 997 dvi: dvi-am
 998
 999 dvi-am:
1000
1001 html: html-am
1002
1003 html-am:
1004
1005 info: info-am
1006
1007 info-am:
1008
1009 install-data-am: install-data-local install-man
1010
1011 install-dvi: install-dvi-am
1012
1013 install-dvi-am:
1014
1015 install-exec-am:
1016
1017 install-html: install-html-am
1018
1019 install-html-am:
1020
1021 install-info: install-info-am
1022
1023 install-info-am:
1024
1025 install-man: install-man1
1026
1027 install-pdf: install-pdf-am
1028
1029 install-pdf-am:
1030
1031 install-ps: install-ps-am
1032
1033 install-ps-am:
1034
1035 installcheck-am:
1036
1037 maintainer-clean: maintainer-clean-am
1038         -rm -f Makefile
1039 maintainer-clean-am: distclean-am maintainer-clean-generic \
1040         maintainer-clean-local
1041
1042 mostlyclean: mostlyclean-am
1043
1044 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1045
1046 pdf: pdf-am
1047
1048 pdf-am:
1049
1050 ps: ps-am
1051
1052 ps-am:
1053
1054 uninstall-am: uninstall-local uninstall-man
1055
1056 uninstall-man: uninstall-man1
1057
1058 .MAKE: check-am install-am install-strip
1059
1060 .PHONY: all all-am all-local check check-TESTS check-am clean \
1061         clean-generic clean-libtool clean-local cscopelist-am ctags-am \
1062         dist-hook distclean distclean-generic distclean-libtool \
1063         distclean-local distdir dvi dvi-am html html-am info info-am \
1064         install install-am install-data install-data-am \
1065         install-data-local install-dvi install-dvi-am install-exec \
1066         install-exec-am install-html install-html-am install-info \
1067         install-info-am install-man install-man1 install-pdf \
1068         install-pdf-am install-ps install-ps-am install-strip \
1069         installcheck installcheck-am installdirs maintainer-clean \
1070         maintainer-clean-generic maintainer-clean-local mostlyclean \
1071         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1072         recheck tags-am uninstall uninstall-am uninstall-local \
1073         uninstall-man uninstall-man1
1074
1075 .PRECIOUS: Makefile
1076
1077
1078 gtkdoc-check.test: Makefile
1079         $(AM_V_GEN)echo "#!/bin/sh -e" > $@; \
1080                 echo "$(GTKDOC_CHECK_PATH) || exit 1" >> $@; \
1081                 chmod +x $@
1082
1083 all-gtk-doc: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
1084 .PHONY: all-gtk-doc
1085
1086 @ENABLE_GTK_DOC_TRUE@all-local: all-gtk-doc
1087
1088 docs: $(HTML_BUILD_STAMP) $(PDF_BUILD_STAMP)
1089
1090 $(REPORT_FILES): sgml-build.stamp
1091
1092 setup-build.stamp:
1093         -$(GTK_DOC_V_SETUP)if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
1094           files=`echo $(SETUP_FILES) $(DOC_MODULE).types`; \
1095           if test "x$$files" != "x" ; then \
1096             for file in $$files ; do \
1097               destdir=`dirname $(abs_builddir)/$$file`; \
1098               test -d "$$destdir" || mkdir -p "$$destdir"; \
1099               test -f $(abs_srcdir)/$$file && \
1100                 cp -pf $(abs_srcdir)/$$file $(abs_builddir)/$$file || true; \
1101             done; \
1102           fi; \
1103         fi
1104         $(AM_V_at)touch setup-build.stamp
1105
1106 scan-build.stamp: setup-build.stamp $(HFILE_GLOB) $(CFILE_GLOB)
1107         $(GTK_DOC_V_SCAN)_source_dir='' ; \
1108         for i in $(DOC_SOURCE_DIR) ; do \
1109           _source_dir="$${_source_dir} --source-dir=$$i" ; \
1110         done ; \
1111         gtkdoc-scan --module=$(DOC_MODULE) --ignore-headers="$(IGNORE_HFILES)" $${_source_dir} $(SCAN_OPTIONS) $(EXTRA_HFILES)
1112         $(GTK_DOC_V_INTROSPECT)if grep -l '^..*$$' $(DOC_MODULE).types > /dev/null 2>&1 ; then \
1113           scanobj_options=""; \
1114           gtkdoc-scangobj 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
1115           if test "$$?" = "0"; then \
1116             if test "x$(V)" = "x1"; then \
1117               scanobj_options="--verbose"; \
1118             fi; \
1119           fi; \
1120           CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) $(LDFLAGS)" \
1121           gtkdoc-scangobj $(SCANGOBJ_OPTIONS) $$scanobj_options --module=$(DOC_MODULE); \
1122         else \
1123           for i in $(SCANOBJ_FILES) ; do \
1124             test -f $$i || touch $$i ; \
1125           done \
1126         fi
1127         $(AM_V_at)touch scan-build.stamp
1128
1129 $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
1130         @true
1131
1132 sgml-build.stamp: setup-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt $(expand_content_files) xml/gtkdocentities.ent
1133         $(GTK_DOC_V_XML)_source_dir='' ; \
1134         for i in $(DOC_SOURCE_DIR) ; do \
1135           _source_dir="$${_source_dir} --source-dir=$$i" ; \
1136         done ; \
1137         gtkdoc-mkdb --module=$(DOC_MODULE) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $${_source_dir} $(MKDB_OPTIONS)
1138         $(AM_V_at)touch sgml-build.stamp
1139
1140 sgml.stamp: sgml-build.stamp
1141         @true
1142
1143 xml/gtkdocentities.ent: Makefile
1144         $(GTK_DOC_V_XML)$(MKDIR_P) $(@D) && ( \
1145                 echo "<!ENTITY package \"$(PACKAGE)\">"; \
1146                 echo "<!ENTITY package_bugreport \"$(PACKAGE_BUGREPORT)\">"; \
1147                 echo "<!ENTITY package_name \"$(PACKAGE_NAME)\">"; \
1148                 echo "<!ENTITY package_string \"$(PACKAGE_STRING)\">"; \
1149                 echo "<!ENTITY package_tarname \"$(PACKAGE_TARNAME)\">"; \
1150                 echo "<!ENTITY package_url \"$(PACKAGE_URL)\">"; \
1151                 echo "<!ENTITY package_version \"$(PACKAGE_VERSION)\">"; \
1152         ) > $@
1153
1154 html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files)
1155         $(GTK_DOC_V_HTML)rm -rf html && mkdir html && \
1156         mkhtml_options=""; \
1157         gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
1158         if test "$$?" = "0"; then \
1159           if test "x$(V)" = "x1"; then \
1160             mkhtml_options="$$mkhtml_options --verbose"; \
1161           fi; \
1162         fi; \
1163         gtkdoc-mkhtml 2>&1 --help | grep  >/dev/null "\-\-path"; \
1164         if test "$$?" = "0"; then \
1165           mkhtml_options="$$mkhtml_options --path=\"$(abs_srcdir)\""; \
1166         fi; \
1167         cd html && gtkdoc-mkhtml $$mkhtml_options $(MKHTML_OPTIONS) $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
1168         -@test "x$(HTML_IMAGES)" = "x" || \
1169         for file in $(HTML_IMAGES) ; do \
1170           test -f $(abs_srcdir)/$$file && cp $(abs_srcdir)/$$file $(abs_builddir)/html; \
1171           test -f $(abs_builddir)/$$file && cp $(abs_builddir)/$$file $(abs_builddir)/html; \
1172         done;
1173         $(GTK_DOC_V_XREF)gtkdoc-fixxref --module=$(DOC_MODULE) --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
1174         $(AM_V_at)touch html-build.stamp
1175
1176 pdf-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) $(expand_content_files)
1177         $(GTK_DOC_V_PDF)rm -f $(DOC_MODULE).pdf && \
1178         mkpdf_options=""; \
1179         gtkdoc-mkpdf 2>&1 --help | grep  >/dev/null "\-\-verbose"; \
1180         if test "$$?" = "0"; then \
1181           if test "x$(V)" = "x1"; then \
1182             mkpdf_options="$$mkpdf_options --verbose"; \
1183           fi; \
1184         fi; \
1185         if test "x$(HTML_IMAGES)" != "x"; then \
1186           for img in $(HTML_IMAGES); do \
1187             part=`dirname $$img`; \
1188             echo $$mkpdf_options | grep >/dev/null "\-\-imgdir=$$part "; \
1189             if test $$? != 0; then \
1190               mkpdf_options="$$mkpdf_options --imgdir=$$part"; \
1191             fi; \
1192           done; \
1193         fi; \
1194         gtkdoc-mkpdf --path="$(abs_srcdir)" $$mkpdf_options $(DOC_MODULE) $(DOC_MAIN_SGML_FILE) $(MKPDF_OPTIONS)
1195         $(AM_V_at)touch pdf-build.stamp
1196
1197 ##############
1198
1199 clean-local:
1200         @rm -f *~ *.bak
1201         @rm -rf .libs
1202         @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-types" ; then \
1203           rm -f $(DOC_MODULE).types; \
1204         fi
1205         @if echo $(SCAN_OPTIONS) | grep -q "\-\-rebuild-sections" ; then \
1206           rm -f $(DOC_MODULE)-sections.txt; \
1207         fi
1208
1209 distclean-local:
1210         @rm -rf xml html $(REPORT_FILES) $(DOC_MODULE).pdf \
1211             $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt
1212         @if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \
1213             rm -f $(SETUP_FILES) $(DOC_MODULE).types; \
1214         fi
1215
1216 maintainer-clean-local:
1217         @rm -rf xml html
1218
1219 install-data-local:
1220         @installfiles=`echo $(builddir)/html/*`; \
1221         if test "$$installfiles" = '$(builddir)/html/*'; \
1222         then echo 1>&2 'Nothing to install' ; \
1223         else \
1224           if test -n "$(DOC_MODULE_VERSION)"; then \
1225             installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
1226           else \
1227             installdir="$(DESTDIR)$(TARGET_DIR)"; \
1228           fi; \
1229           $(mkinstalldirs) $${installdir} ; \
1230           for i in $$installfiles; do \
1231             echo ' $(INSTALL_DATA) '$$i ; \
1232             $(INSTALL_DATA) $$i $${installdir}; \
1233           done; \
1234           if test -n "$(DOC_MODULE_VERSION)"; then \
1235             mv -f $${installdir}/$(DOC_MODULE).devhelp2 \
1236               $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \
1237           fi; \
1238           $(GTKDOC_REBASE) --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir}; \
1239         fi
1240
1241 uninstall-local:
1242         @if test -n "$(DOC_MODULE_VERSION)"; then \
1243           installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \
1244         else \
1245           installdir="$(DESTDIR)$(TARGET_DIR)"; \
1246         fi; \
1247         rm -rf $${installdir}
1248
1249 #
1250 # Require gtk-doc when making dist
1251 #
1252 @HAVE_GTK_DOC_TRUE@dist-check-gtkdoc: docs
1253 @HAVE_GTK_DOC_FALSE@dist-check-gtkdoc:
1254 @HAVE_GTK_DOC_FALSE@    @echo "*** gtk-doc is needed to run 'make dist'.         ***"
1255 @HAVE_GTK_DOC_FALSE@    @echo "*** gtk-doc was not found when 'configure' ran.   ***"
1256 @HAVE_GTK_DOC_FALSE@    @echo "*** please install gtk-doc and rerun 'configure'. ***"
1257 @HAVE_GTK_DOC_FALSE@    @false
1258
1259 dist-hook: dist-check-gtkdoc all-gtk-doc dist-hook-local
1260         @mkdir $(distdir)/html
1261         @cp ./html/* $(distdir)/html
1262         @-cp ./$(DOC_MODULE).pdf $(distdir)/
1263         @-cp ./$(DOC_MODULE).types $(distdir)/
1264         @-cp ./$(DOC_MODULE)-sections.txt $(distdir)/
1265         @cd $(distdir) && rm -f $(DISTCLEANFILES)
1266         @$(GTKDOC_REBASE) --online --relative --html-dir=$(distdir)/html
1267
1268 .PHONY : dist-hook-local docs
1269
1270 @ENABLE_MAN_TRUE@.xml.1:
1271 @ENABLE_MAN_TRUE@       $(AM_V_GEN) $(XSLTPROC) $(XSLTPROC_FLAGS) http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl $<
1272
1273 CLEANFILES ?=
1274
1275 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1276 # Otherwise a system limit (for SysV at least) may be exceeded.
1277 .NOEXPORT: