1 .. SPDX-License-Identifier: GPL-2.0+
3 U-Boot for Amlogic U200
4 =======================
6 U200 is a reference board manufactured by Amlogic with the following
9 - Amlogic S905D2 ARM Cortex-A53 quad-core SoC
11 - 10/100 Ethernet (Internal PHY)
21 Schematics are available from Amlogic on demand.
28 $ export CROSS_COMPILE=aarch64-none-elf-
35 Amlogic doesn't provide sources for the firmware and for tools needed
36 to create the bootloader image, so it is necessary to obtain them from
37 the git tree published by the board vendor:
41 $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
42 $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
43 $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
44 $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
45 $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
46 $ git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
48 $ make g12a_u200_v1_defconfig
50 $ export UBOOTDIR=$PWD
52 Download the latest Amlogic Buildroot package, and extract it :
56 $ wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
57 $ tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
58 $ export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
59 $ export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
61 Go back to mainline U-Boot source tree then :
67 $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
68 $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/
69 $ cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/
70 $ cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/
71 $ cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/
72 $ cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/
73 $ cp $FIPDIR/g12a/ddr3_1d.fw fip/
74 $ cp $FIPDIR/g12a/ddr4_1d.fw fip/
75 $ cp $FIPDIR/g12a/ddr4_2d.fw fip/
76 $ cp $FIPDIR/g12a/diag_lpddr4.fw fip/
77 $ cp $FIPDIR/g12a/lpddr4_1d.fw fip/
78 $ cp $FIPDIR/g12a/lpddr4_2d.fw fip/
79 $ cp $FIPDIR/g12a/piei.fw fip/
80 $ cp u-boot.bin fip/bl33.bin
100 $ $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
101 --output fip/bl30_new.bin.g12a.enc \
103 $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
104 --output fip/bl30_new.bin.enc \
105 --level v3 --type bl30
106 $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
107 --output fip/bl31.img.enc \
108 --level v3 --type bl31
109 $ $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
110 --output fip/bl33.bin.enc \
111 --level v3 --type bl33
112 $ $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
113 --output fip/bl2.n.bin.sig
114 $ $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
115 --output fip/u-boot.bin \
116 --bl2 fip/bl2.n.bin.sig \
117 --bl30 fip/bl30_new.bin.enc \
118 --bl31 fip/bl31.img.enc \
119 --bl33 fip/bl33.bin.enc \
120 --ddrfw1 fip/ddr4_1d.fw \
121 --ddrfw2 fip/ddr4_2d.fw \
122 --ddrfw3 fip/ddr3_1d.fw \
123 --ddrfw4 fip/piei.fw \
124 --ddrfw5 fip/lpddr4_1d.fw \
125 --ddrfw6 fip/lpddr4_2d.fw \
126 --ddrfw7 fip/diag_lpddr4.fw \
129 and then write the image to SD with:
133 $ DEV=/dev/your_sd_device
134 $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
135 $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444