doc/README.fsl-ddr

   1
   2 Table of interleaving modes supported in cpu/8xxx/ddr/
   3 ======================================================
   4   +-------------+---------------------------------------------------------+
   5   |             |                   Rank Interleaving                     |
   6   |             +--------+-----------+-----------+------------+-----------+
   7   |Memory       |        |           |           |    2x2     |    4x1    |
   8   |Controller   |  None  | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |
   9   |Interleaving |        | {CS0+CS1} | {CS2+CS3} | {CS2+CS3}  |  CS2+CS3} |
  10   +-------------+--------+-----------+-----------+------------+-----------+
  11   |None         |  Yes   | Yes       | Yes       | Yes        | Yes       |
  12   +-------------+--------+-----------+-----------+------------+-----------+
  13   |Cacheline    |  Yes   | Yes       | No        | No, Only(*)| Yes       |
  14   |             |CS0 Only|           |           | {CS0+CS1}  |           |
  15   +-------------+--------+-----------+-----------+------------+-----------+
  16   |Page         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
  17   |             |CS0 Only|           |           | {CS0+CS1}  |           |
  18   +-------------+--------+-----------+-----------+------------+-----------+
  19   |Bank         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
  20   |             |CS0 Only|           |           | {CS0+CS1}  |           |
  21   +-------------+--------+-----------+-----------+------------+-----------+
  22   |Superbank    |  No    | Yes       | No        | No, Only(*)| Yes       |
  23   |             |        |           |           | {CS0+CS1}  |           |
  24   +-------------+--------+-----------+-----------+------------+-----------+
  25  (*) Although the hardware can be configured with memory controller
  26  interleaving using "2x2" rank interleaving, it only interleaves {CS0+CS1}
  27  from each controller. {CS2+CS3} on each controller are only rank
  28  interleaved on that controller.
  29
  30 The ways to configure the ddr interleaving mode
  31 ==============================================
  32 1. In board header file(e.g.MPC8572DS.h), add default interleaving setting
  33    under "CONFIG_EXTRA_ENV_SETTINGS", like:
  34         #define CONFIG_EXTRA_ENV_SETTINGS                               \
  35          "memctl_intlv_ctl=2\0"                                         \
  36          ......
  37
  38 2. Run u-boot "setenv" command to configure the memory interleaving mode.
  39    Either numerical or string value is accepted.
  40
  41   # disable memory controller interleaving
  42   setenv memctl_intlv_ctl
  43
  44   # cacheline interleaving
  45   setenv memctl_intlv_ctl 0 or setenv memctl_intlv_ctl cacheline
  46
  47   # page interleaving
  48   setenv memctl_intlv_ctl 1 or setenv memctl_intlv_ctl page
  49
  50   # bank interleaving
  51   setenv memctl_intlv_ctl 2 or setenv memctl_intlv_ctl bank
  52
  53   # superbank
  54   setenv memctl_intlv_ctl 3 or setenv memctl_intlv_ctl superbank
  55
  56   # disable bank (chip-select) interleaving
  57   setenv ba_intlv_ctl
  58
  59   # bank(chip-select) interleaving cs0+cs1
  60   setenv ba_intlv_ctl 0x40 or setenv ba_intlv_ctl cs0_cs1
  61
  62   # bank(chip-select) interleaving cs2+cs3
  63   setenv ba_intlv_ctl 0x20 or setenv ba_intlv_ctl cs2_cs3
  64
  65   # bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3)  (2x2)
  66   setenv ba_intlv_ctl 0x60 or setenv ba_intlv_ctl cs0_cs1_and_cs2_cs3
  67
  68   # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
  69   setenv ba_intlv_ctl 0x04 or setenv ba_intlv_ctl cs0_cs1_cs2_cs3