doc/README.fsl-ddr

   1
   2 Table of interleaving modes supported in cpu/8xxx/ddr/
   3 ======================================================
   4   +-------------+---------------------------------------------------------+
   5   |             |                   Rank Interleaving                     |
   6   |             +--------+-----------+-----------+------------+-----------+
   7   |Memory       |        |           |           |    2x2     |    4x1    |
   8   |Controller   |  None  | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |
   9   |Interleaving |        | {CS0+CS1} | {CS2+CS3} | {CS2+CS3}  |  CS2+CS3} |
  10   +-------------+--------+-----------+-----------+------------+-----------+
  11   |None         |  Yes   | Yes       | Yes       | Yes        | Yes       |
  12   +-------------+--------+-----------+-----------+------------+-----------+
  13   |Cacheline    |  Yes   | Yes       | No        | No, Only(*)| Yes       |
  14   |             |CS0 Only|           |           | {CS0+CS1}  |           |
  15   +-------------+--------+-----------+-----------+------------+-----------+
  16   |Page         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
  17   |             |CS0 Only|           |           | {CS0+CS1}  |           |
  18   +-------------+--------+-----------+-----------+------------+-----------+
  19   |Bank         |  Yes   | Yes       | No        | No, Only(*)| Yes       |
  20   |             |CS0 Only|           |           | {CS0+CS1}  |           |
  21   +-------------+--------+-----------+-----------+------------+-----------+
  22   |Superbank    |  No    | Yes       | No        | No, Only(*)| Yes       |
  23   |             |        |           |           | {CS0+CS1}  |           |
  24   +-------------+--------+-----------+-----------+------------+-----------+
  25  (*) Although the hardware can be configured with memory controller
  26  interleaving using "2x2" rank interleaving, it only interleaves {CS0+CS1}
  27  from each controller. {CS2+CS3} on each controller are only rank
  28  interleaved on that controller.
  29
  30  For memory controller interleaving, identical DIMMs are suggested. Software
  31  doesn't check the size or organization of interleaved DIMMs.
  32
  33 The ways to configure the ddr interleaving mode
  34 ==============================================
  35 1. In board header file(e.g.MPC8572DS.h), add default interleaving setting
  36    under "CONFIG_EXTRA_ENV_SETTINGS", like:
  37         #define CONFIG_EXTRA_ENV_SETTINGS                               \
  38          "hwconfig=fsl_ddr:ctlr_intlv=bank"                     \
  39          ......
  40
  41 2. Run u-boot "setenv" command to configure the memory interleaving mode.
  42    Either numerical or string value is accepted.
  43
  44   # disable memory controller interleaving
  45   setenv hwconfig "fsl_ddr:ctlr_intlv=null"
  46
  47   # cacheline interleaving
  48   setenv hwconfig "fsl_ddr:ctlr_intlv=cacheline"
  49
  50   # page interleaving
  51   setenv hwconfig "fsl_ddr:ctlr_intlv=page"
  52
  53   # bank interleaving
  54   setenv hwconfig "fsl_ddr:ctlr_intlv=bank"
  55
  56   # superbank
  57   setenv hwconfig "fsl_ddr:ctlr_intlv=superbank"
  58
  59   # disable bank (chip-select) interleaving
  60   setenv hwconfig "fsl_ddr:bank_intlv=null"
  61
  62   # bank(chip-select) interleaving cs0+cs1
  63   setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1"
  64
  65   # bank(chip-select) interleaving cs2+cs3
  66   setenv hwconfig "fsl_ddr:bank_intlv=cs2_cs3"
  67
  68   # bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3)  (2x2)
  69   setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_and_cs2_cs3"
  70
  71   # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
  72   setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
  73
  74 Memory controller address hashing
  75 ==================================
  76 If the DDR controller supports address hashing, it can be enabled by hwconfig.
  77
  78 Syntax is:
  79 hwconfig=fsl_ddr:addr_hash=true
  80
  81 Memory controller ECC on/off
  82 ============================
  83 If ECC is enabled in board configuratoin file, i.e. #define CONFIG_DDR_ECC,
  84 ECC can be turned on/off by hwconfig.
  85
  86 Syntax is
  87 hwconfig=fsl_ddr:ecc=off
  88
  89 Memory testing options for mpc85xx
  90 ==================================
  91 1. Memory test can be done once U-boot prompt comes up using mtest, or
  92 2. Memory test can be done with Power-On-Self-Test function, activated at
  93    compile time.
  94
  95    In order to enable the POST memory test, CONFIG_POST needs to be
  96    defined in board configuraiton header file. By default, POST memory test
  97    performs a fast test. A slow test can be enabled by changing the flag at
  98    compiling time. To test memory bigger than 2GB, 36BIT support is needed.
  99    Memory is tested within a 2GB window. TLBs are used to map the virtual 2GB
 100    window to physical address so that all physical memory can be tested.
 101
 102 Combination of hwconfig
 103 =======================
 104 Hwconfig can be combined with multiple parameters, for example, on a supported
 105 platform
 106
 107 hwconfig=fsl_ddr:addr_hash=true,ctlr_intlv=cacheline,bank_intlv=cs0_cs1_cs2_cs3,ecc=on
 108
 109 Table for dynamic ODT for DDR3
 110 ==============================
 111 For single-slot system with quad-rank DIMM and dual-slot system, dynamic ODT may
 112 be needed, depending on the configuration. The numbers in the following tables are
 113 in Ohms.
 114
 115 * denotes dynamic ODT
 116
 117 Two slots system
 118 +-----------------------+----------+---------------+-----------------------------+-----------------------------+
 119 |     Configuration     |          |DRAM controller|           Slot 1            |            Slot 2           |
 120 +-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
 121 |           |           |          |       |       |     Rank 1   |     Rank 2   |   Rank 1     |    Rank 2    |
 122 +  Slot 1   |   Slot 2  |Write/Read| Write | Read  |-------+------+-------+------+-------+------+-------+------+
 123 |           |           |          |       |       | Write | Read | Write | Read | Write | Read | Write | Read |
 124 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 125 |           |           |  Slot 1  |  off  | 75    | 120   | off  | off   | off  | off   | off  | 30    | 30   |
 126 | Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 127 |           |           |  Slot 2  |  off  | 75    | off   | off  | 30    | 30   | 120   | off  | off   | off  |
 128 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 129 |           |           |  Slot 1  |  off  | 75    | 120   | off  | off   | off  | 20    | 20   |       |      |
 130 | Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 131 |           |           |  Slot 2  |  off  | 75    | off   | off  | 20    | 20   | 120  *| off  |       |      |
 132 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 133 |           |           |  Slot 1  |  off  | 75    | 120  *| off  |       |      | off   | off  | 20    | 20   |
 134 |Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 135 |           |           |  Slot 2  |  off  | 75    | 20    | 20   |       |      | 120   | off  | off   | off  |
 136 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 137 |           |           |  Slot 1  |  off  | 75    | 120  *| off  |       |      | 30    | 30   |       |      |
 138 |Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 139 |           |           |  Slot 2  |  off  | 75    | 30    | 30   |       |      | 120  *| off  |       |      |
 140 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 141 | Dual Rank |   Empty   |  Slot 1  |  off  | 75    | 40    | off  | off   | off  |       |      |       |      |
 142 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 143 |   Empty   | Dual Rank |  Slot 2  |  off  | 75    |       |      |       |      | 40    | off  | off   | off  |
 144 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 145 |Single Rank|   Empty   |  Slot 1  |  off  | 75    | 40    | off  |       |      |       |      |       |      |
 146 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 147 |   Empty   |Single Rank|  Slot 2  |  off  | 75    |       |      |       |      | 40    | off  |       |      |
 148 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 149
 150 Single slot system
 151 +-------------+------------+---------------+-----------------------------+-----------------------------+
 152 |             |            |DRAM controller|     Rank 1   |    Rank 2    |    Rank 3    |    Rank 4    |
 153 |Configuration| Write/Read |-------+-------+-------+------+-------+------+-------+------+-------+------+
 154 |             |            | Write | Read  | Write | Read | Write | Read | Write | Read | Write | Read |
 155 +-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 156 |             |   R1       | off   | 75    | 120  *| off  | off   | off  | 20    | 20   | off   | off  |
 157 |             |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 158 |             |   R2       | off   | 75    | off   | 20   | 120   | off  | 20    | 20   | off   | off  |
 159 |  Quad Rank  |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 160 |             |   R3       | off   | 75    | 20    | 20   | off   | off  | 120  *| off  | off   | off  |
 161 |             |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 162 |             |   R4       | off   | 75    | 20    | 20   | off   | off  | off   | 20   | 120   | off  |
 163 +-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 164 |             |   R1       | off   | 75    | 40    | off  | off   | off  |
 165 |  Dual Rank  |------------+-------+-------+-------+------+-------+------+
 166 |             |   R2       | off   | 75    | 40    | off  | off   | off  |
 167 +-------------+------------+-------+-------+-------+------+-------+------+
 168 | Single Rank |   R1       | off   | 75    | 40    | off  |
 169 +-------------+------------+-------+-------+-------+------+
 170
 171 Reference http://www.xrosstalkmag.com/mag_issues/xrosstalk_oct08_final.pdf
 172           http://download.micron.com/pdf/technotes/ddr3/tn4108_ddr3_design_guide.pdf
 173
 174
 175 Table for ODT for DDR2
 176 ======================
 177 Two slots system
 178 +-----------------------+----------+---------------+-----------------------------+-----------------------------+
 179 |     Configuration     |          |DRAM controller|           Slot 1            |            Slot 2           |
 180 +-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
 181 |           |           |          |       |       |     Rank 1   |     Rank 2   |   Rank 1     |    Rank 2    |
 182 +  Slot 1   |   Slot 2  |Write/Read| Write | Read  |-------+------+-------+------+-------+------+-------+------+
 183 |           |           |          |       |       | Write | Read | Write | Read | Write | Read | Write | Read |
 184 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 185 |           |           |  Slot 1  |  off  | 150   | off   | off  | off   | off  | 75    | 75   | off   | off  |
 186 | Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 187 |           |           |  Slot 2  |  off  | 150   | 75    | 75   | off   | off  | off   | off  | off   | off  |
 188 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 189 |           |           |  Slot 1  |  off  | 150   | off   | off  | off   | off  | 75    | 75   |       |      |
 190 | Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 191 |           |           |  Slot 2  |  off  | 150   | 75    | 75   | off   | off  | off   | off  |       |      |
 192 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 193 |           |           |  Slot 1  |  off  | 150   | off   | off  |       |      | 75    | 75   | off   | off  |
 194 |Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 195 |           |           |  Slot 2  |  off  | 150   | 75    | 75   |       |      | off   | off  | off   | off  |
 196 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 197 |           |           |  Slot 1  |  off  | 150   | off   | off  |       |      | 75    | 75   |       |      |
 198 |Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 199 |           |           |  Slot 2  |  off  | 150   | 75    | 75   |       |      | off   | off  |       |      |
 200 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 201 | Dual Rank |   Empty   |  Slot 1  |  off  | 75    | 150   | off  | off   | off  |       |      |       |      |
 202 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 203 |   Empty   | Dual Rank |  Slot 2  |  off  | 75    |       |      |       |      | 150   | off  | off   | off  |
 204 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 205 |Single Rank|   Empty   |  Slot 1  |  off  | 75    | 150   | off  |       |      |       |      |       |      |
 206 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 207 |   Empty   |Single Rank|  Slot 2  |  off  | 75    |       |      |       |      | 150   | off  |       |      |
 208 +-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
 209
 210 Single slot system
 211 +-------------+------------+---------------+-----------------------------+
 212 |             |            |DRAM controller|     Rank 1   |    Rank 2    |
 213 |Configuration| Write/Read |-------+-------+-------+------+-------+------+
 214 |             |            | Write | Read  | Write | Read | Write | Read |
 215 +-------------+------------+-------+-------+-------+------+-------+------+
 216 |             |   R1       | off   | 75    | 150   | off  | off   | off  |
 217 |  Dual Rank  |------------+-------+-------+-------+------+-------+------+
 218 |             |   R2       | off   | 75    | 150   | off  | off   | off  |
 219 +-------------+------------+-------+-------+-------+------+-------+------+
 220 | Single Rank |   R1       | off   | 75    | 150   | off  |
 221 +-------------+------------+-------+-------+-------+------+
 222
 223 Reference http://www.samsung.com/global/business/semiconductor/products/dram/downloads/applicationnote/ddr2_odt_control_200603.pdf
 224
 225
 226 Interactive DDR debugging
 227 ===========================
 228
 229 For DDR parameter tuning up and debugging, the interactive DDR debugging can
 230 be activated by saving an environment variable "ddr_interactive". The value
 231 doesn't matter. Once activated, U-boot prompts "FSL DDR>" before enabling DDR
 232 controller. The available commands can be seen by typing "help".
 233
 234 The example flow of using interactive debugging is
 235 type command "compute" to calculate the parameters from the default
 236 type command "print" with arguments to show SPD, options, registers
 237 type command "edit" with arguments to change any if desired
 238 type command "go" to continue calculation and enable DDR controller
 239 type command "reset" to reset the board
 240 type command "recompute" to reload SPD and start over
 241
 242 Note, check "next_step" to show the flow. For example, after edit opts, the
 243 next_step is STEP_ASSIGN_ADDRESSES. After editing registers, the next_step is
 244 STEP_PROGRAM_REGS. Upon issuing command "go", DDR controller will be enabled
 245 with current setting without further calculation.
 246
 247 The detail syntax for each commands are
 248
 249 print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
 250         c<n>            - the controller number, eg. c0, c1
 251         d<n>            - the DIMM number, eg. d0, d1
 252         spd             - print SPD data
 253         dimmparms       - DIMM paramaters, calcualted from SPD
 254         commonparms     - lowest common parameters for all DIMMs
 255         opts            - options
 256         addresses       - address assignment (not implemented yet)
 257         regs            - controller registers
 258
 259 edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
 260         c<n>            - the controller number, eg. c0, c1
 261         d<n>            - the DIMM number, eg. d0, d1
 262         spd             - print SPD data
 263         dimmparms       - DIMM paramaters, calcualted from SPD
 264         commonparms     - lowest common parameters for all DIMMs
 265         opts            - options
 266         addresses       - address assignment (not implemented yet)
 267         regs            - controller registers
 268         <element>       - name of the modified element
 269                           byte number if the object is SPD
 270         <value>         - decimal or heximal (prefixed with 0x) numbers
 271
 272 reset
 273         no arguement    - reset the board
 274
 275 recompute
 276         no argument     - reload SPD and start over
 277
 278 compute
 279         no argument     - recompute from current next_step
 280
 281 next_step
 282         no argument     - show current next_step
 283
 284 help
 285         no argument     - print a list of all commands
 286
 287 go
 288         no argument     - program memory controller(s) and continue with U-boot
 289
 290 Examples of debugging flow
 291
 292         FSL DDR>compute
 293         Detected UDIMM UG51U6400N8SU-ACF
 294         SL DDR>print
 295         print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
 296         FSL DDR>print dimmparms
 297         DIMM parameters:  Controller=0 DIMM=0
 298         DIMM organization parameters:
 299         module part name = UG51U6400N8SU-ACF
 300         rank_density = 2147483648 bytes (2048 megabytes)
 301         capacity = 4294967296 bytes (4096 megabytes)
 302         burst_lengths_bitmask = 0C
 303         base_addresss = 0 (00000000 00000000)
 304         n_ranks = 2
 305         data_width = 64
 306         primary_sdram_width = 64
 307         ec_sdram_width = 0
 308         registered_dimm = 0
 309         n_row_addr = 15
 310         n_col_addr = 10
 311         edc_config = 0
 312         n_banks_per_sdram_device = 8
 313         tCKmin_X_ps = 1500
 314         tCKmin_X_minus_1_ps = 0
 315         tCKmin_X_minus_2_ps = 0
 316         tCKmax_ps = 0
 317         caslat_X = 960
 318         tAA_ps = 13125
 319         caslat_X_minus_1 = 0
 320         caslat_X_minus_2 = 0
 321         caslat_lowest_derated = 0
 322         tRCD_ps = 13125
 323         tRP_ps = 13125
 324         tRAS_ps = 36000
 325         tWR_ps = 15000
 326         tWTR_ps = 7500
 327         tRFC_ps = 160000
 328         tRRD_ps = 6000
 329         tRC_ps = 49125
 330         refresh_rate_ps = 7800000
 331         tIS_ps = 0
 332         tIH_ps = 0
 333         tDS_ps = 0
 334         tDH_ps = 0
 335         tRTP_ps = 7500
 336         tDQSQ_max_ps = 0
 337         tQHS_ps = 0
 338         FSL DDR>edit c0 opts ECC_mode 0
 339         FSL DDR>edit c0 regs cs0_bnds 0x000000FF
 340         FSL DDR>go
 341         2 GiB left unmapped
 342         4 GiB (DDR3, 64-bit, CL=9, ECC off)
 343                DDR Chip-Select Interleaving Mode: CS0+CS1
 344         Testing 0x00000000 - 0x7fffffff
 345         Testing 0x80000000 - 0xffffffff
 346         Remap DDR 2 GiB left unmapped
 347
 348         POST memory PASSED
 349         Flash: 128 MiB
 350         L2:    128 KB enabled
 351         Corenet Platform Cache: 1024 KB enabled
 352         SERDES: timeout resetting bank 3
 353         SRIO1: disabled
 354         SRIO2: disabled
 355         MMC:  FSL_ESDHC: 0
 356         EEPROM: Invalid ID (ff ff ff ff)
 357         PCIe1: disabled
 358         PCIe2: Root Complex, x1, regs @ 0xfe201000
 359           01:00.0     - 8086:10d3 - Network controller
 360         PCIe2: Bus 00 - 01
 361         PCIe3: disabled
 362         In:    serial
 363         Out:   serial
 364         Err:   serial
 365         Net:   Initializing Fman
 366         Fman1: Uploading microcode version 101.8.0
 367         e1000: 00:1b:21:81:d2:e0
 368         FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, e1000#0 [PRIME]
 369         Warning: e1000#0 MAC addresses don't match:
 370         Address in SROM is         00:1b:21:81:d2:e0
 371         Address in environment is  00:e0:0c:00:ea:05
 372
 373         Hit any key to stop autoboot:  0
 374         =>