doc/Makefile.in

   1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # Copyright (C) 2002 Free Software Foundation, Inc.
  18 #
  19 # This file is part of Libgcrypt.
  20 #
  21 # Libgcrypt is free software; you can redistribute it and/or modify
  22 # it under the terms of the GNU Lesser General Public License as
  23 # published by the Free Software Foundation; either version 2.1 of
  24 # the License, or (at your option) any later version.
  25 #
  26 # Libgcrypt is distributed in the hope that it will be useful,
  27 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  28 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  29 # GNU Lesser General Public License for more details.
  30 #
  31 # You should have received a copy of the GNU Lesser General Public
  32 # License along with this program; if not, write to the Free Software
  33 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
  34 VPATH = @srcdir@
  35 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  36 am__make_running_with_option = \
  37   case $${target_option-} in \
  38       ?) ;; \
  39       *) echo "am__make_running_with_option: internal error: invalid" \
  40               "target option '$${target_option-}' specified" >&2; \
  41          exit 1;; \
  42   esac; \
  43   has_opt=no; \
  44   sane_makeflags=$$MAKEFLAGS; \
  45   if $(am__is_gnu_make); then \
  46     sane_makeflags=$$MFLAGS; \
  47   else \
  48     case $$MAKEFLAGS in \
  49       *\\[\ \   ]*) \
  50         bs=\\; \
  51         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  52           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  53     esac; \
  54   fi; \
  55   skip_next=no; \
  56   strip_trailopt () \
  57   { \
  58     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  59   }; \
  60   for flg in $$sane_makeflags; do \
  61     test $$skip_next = yes && { skip_next=no; continue; }; \
  62     case $$flg in \
  63       *=*|--*) continue;; \
  64         -*I) strip_trailopt 'I'; skip_next=yes;; \
  65       -*I?*) strip_trailopt 'I';; \
  66         -*O) strip_trailopt 'O'; skip_next=yes;; \
  67       -*O?*) strip_trailopt 'O';; \
  68         -*l) strip_trailopt 'l'; skip_next=yes;; \
  69       -*l?*) strip_trailopt 'l';; \
  70       -[dEDm]) skip_next=yes;; \
  71       -[JT]) skip_next=yes;; \
  72     esac; \
  73     case $$flg in \
  74       *$$target_option*) has_opt=yes; break;; \
  75     esac; \
  76   done; \
  77   test $$has_opt = yes
  78 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  79 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  80 pkgdatadir = $(datadir)/@PACKAGE@
  81 pkgincludedir = $(includedir)/@PACKAGE@
  82 pkglibdir = $(libdir)/@PACKAGE@
  83 pkglibexecdir = $(libexecdir)/@PACKAGE@
  84 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  85 install_sh_DATA = $(install_sh) -c -m 644
  86 install_sh_PROGRAM = $(install_sh) -c
  87 install_sh_SCRIPT = $(install_sh) -c
  88 INSTALL_HEADER = $(INSTALL_DATA)
  89 transform = $(program_transform_name)
  90 NORMAL_INSTALL = :
  91 PRE_INSTALL = :
  92 POST_INSTALL = :
  93 NORMAL_UNINSTALL = :
  94 PRE_UNINSTALL = :
  95 POST_UNINSTALL = :
  96 build_triplet = @build@
  97 host_triplet = @host@
  98 subdir = doc
  99 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
 100         $(gcrypt_TEXINFOS) $(top_srcdir)/build-aux/mdate-sh \
 101         $(srcdir)/version.texi $(srcdir)/stamp-vti \
 102         $(top_srcdir)/build-aux/texinfo.tex
 103 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 104 am__aclocal_m4_deps = $(top_srcdir)/m4/gpg-error.m4 \
 105         $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
 106         $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
 107         $(top_srcdir)/m4/lt~obsolete.m4 \
 108         $(top_srcdir)/m4/noexecstack.m4 $(top_srcdir)/m4/onceonly.m4 \
 109         $(top_srcdir)/m4/socklen.m4 $(top_srcdir)/m4/sys_socket_h.m4 \
 110         $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
 111 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 112         $(ACLOCAL_M4)
 113 mkinstalldirs = $(install_sh) -d
 114 CONFIG_HEADER = $(top_builddir)/config.h
 115 CONFIG_CLEAN_FILES =
 116 CONFIG_CLEAN_VPATH_FILES =
 117 AM_V_P = $(am__v_P_@AM_V@)
 118 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 119 am__v_P_0 = false
 120 am__v_P_1 = :
 121 AM_V_GEN = $(am__v_GEN_@AM_V@)
 122 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 123 am__v_GEN_0 = @echo "  GEN     " $@;
 124 am__v_GEN_1 =
 125 AM_V_at = $(am__v_at_@AM_V@)
 126 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 127 am__v_at_0 = @
 128 am__v_at_1 =
 129 SOURCES =
 130 DIST_SOURCES =
 131 AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
 132 am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
 133 am__v_DVIPS_0 = @echo "  DVIPS   " $@;
 134 am__v_DVIPS_1 =
 135 AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
 136 am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
 137 am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
 138 am__v_MAKEINFO_1 =
 139 AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
 140 am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
 141 am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
 142 am__v_INFOHTML_1 =
 143 AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
 144 am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
 145 am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
 146 am__v_TEXI2DVI_1 =
 147 AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
 148 am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
 149 am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
 150 am__v_TEXI2PDF_1 =
 151 AM_V_texinfo = $(am__v_texinfo_@AM_V@)
 152 am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
 153 am__v_texinfo_0 = -q
 154 am__v_texinfo_1 =
 155 AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
 156 am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
 157 am__v_texidevnull_0 = > /dev/null
 158 am__v_texidevnull_1 =
 159 INFO_DEPS = $(srcdir)/gcrypt.info
 160 TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex
 161 am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux
 162 DVIS = gcrypt.dvi
 163 PDFS = gcrypt.pdf
 164 PSS = gcrypt.ps
 165 HTMLS = gcrypt.html
 166 TEXINFOS = gcrypt.texi
 167 TEXI2DVI = texi2dvi
 168 TEXI2PDF = $(TEXI2DVI) --pdf --batch
 169 MAKEINFOHTML = $(MAKEINFO) --html
 170 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 171 DVIPS = dvips
 172 am__can_run_installinfo = \
 173   case $$AM_UPDATE_INFO_DIR in \
 174     n|no|NO) false;; \
 175     *) (install-info --version) >/dev/null 2>&1;; \
 176   esac
 177 am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
 178 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 179 am__vpath_adj = case $$p in \
 180     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 181     *) f=$$p;; \
 182   esac;
 183 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 184 am__install_max = 40
 185 am__nobase_strip_setup = \
 186   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 187 am__nobase_strip = \
 188   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 189 am__nobase_list = $(am__nobase_strip_setup); \
 190   for p in $$list; do echo "$$p $$p"; done | \
 191   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 192   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 193     if (++n[$$2] == $(am__install_max)) \
 194       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 195     END { for (dir in files) print dir, files[dir] }'
 196 am__base_list = \
 197   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 198   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 199 am__uninstall_files_from_dir = { \
 200   test -z "$$files" \
 201     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 202     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 203          $(am__cd) "$$dir" && rm -f $$files; }; \
 204   }
 205 man1dir = $(mandir)/man1
 206 NROFF = nroff
 207 MANS = $(man_MANS)
 208 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 209 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 210 ACLOCAL = @ACLOCAL@
 211 AMTAR = @AMTAR@
 212 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 213 AR = @AR@
 214 AS = @AS@
 215 AUTOCONF = @AUTOCONF@
 216 AUTOHEADER = @AUTOHEADER@
 217 AUTOMAKE = @AUTOMAKE@
 218 AWK = @AWK@
 219 BUILD_FILEVERSION = @BUILD_FILEVERSION@
 220 BUILD_REVISION = @BUILD_REVISION@
 221 BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
 222 CC = @CC@
 223 CCAS = @CCAS@
 224 CCASDEPMODE = @CCASDEPMODE@
 225 CCASFLAGS = @CCASFLAGS@
 226 CCDEPMODE = @CCDEPMODE@
 227 CC_FOR_BUILD = @CC_FOR_BUILD@
 228 CFLAGS = @CFLAGS@
 229 CPP = @CPP@
 230 CPPFLAGS = @CPPFLAGS@
 231 CYGPATH_W = @CYGPATH_W@
 232 DEFS = @DEFS@
 233 DEPDIR = @DEPDIR@
 234 DLLTOOL = @DLLTOOL@
 235 DL_LIBS = @DL_LIBS@
 236 DSYMUTIL = @DSYMUTIL@
 237 DUMPBIN = @DUMPBIN@
 238 ECHO_C = @ECHO_C@
 239 ECHO_N = @ECHO_N@
 240 ECHO_T = @ECHO_T@
 241 EGREP = @EGREP@
 242 EXEEXT = @EXEEXT@
 243 FALLBACK_SOCKLEN_T = @FALLBACK_SOCKLEN_T@
 244 FGREP = @FGREP@
 245 GCRYPT_CIPHERS = @GCRYPT_CIPHERS@
 246 GCRYPT_DIGESTS = @GCRYPT_DIGESTS@
 247 GCRYPT_HWF_MODULES = @GCRYPT_HWF_MODULES@
 248 GCRYPT_KDFS = @GCRYPT_KDFS@
 249 GCRYPT_PUBKEY_CIPHERS = @GCRYPT_PUBKEY_CIPHERS@
 250 GCRYPT_RANDOM = @GCRYPT_RANDOM@
 251 GPG_ERROR_CFLAGS = @GPG_ERROR_CFLAGS@
 252 GPG_ERROR_CONFIG = @GPG_ERROR_CONFIG@
 253 GPG_ERROR_LIBS = @GPG_ERROR_LIBS@
 254 GPG_ERROR_MT_CFLAGS = @GPG_ERROR_MT_CFLAGS@
 255 GPG_ERROR_MT_LIBS = @GPG_ERROR_MT_LIBS@
 256 GREP = @GREP@
 257 INSERT_SYS_SELECT_H = @INSERT_SYS_SELECT_H@
 258 INSTALL = @INSTALL@
 259 INSTALL_DATA = @INSTALL_DATA@
 260 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 261 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 262 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 263 LD = @LD@
 264 LDFLAGS = @LDFLAGS@
 265 LIBGCRYPT_CIPHERS = @LIBGCRYPT_CIPHERS@
 266 LIBGCRYPT_CONFIG_API_VERSION = @LIBGCRYPT_CONFIG_API_VERSION@
 267 LIBGCRYPT_CONFIG_CFLAGS = @LIBGCRYPT_CONFIG_CFLAGS@
 268 LIBGCRYPT_CONFIG_HOST = @LIBGCRYPT_CONFIG_HOST@
 269 LIBGCRYPT_CONFIG_LIBS = @LIBGCRYPT_CONFIG_LIBS@
 270 LIBGCRYPT_DIGESTS = @LIBGCRYPT_DIGESTS@
 271 LIBGCRYPT_LT_AGE = @LIBGCRYPT_LT_AGE@
 272 LIBGCRYPT_LT_CURRENT = @LIBGCRYPT_LT_CURRENT@
 273 LIBGCRYPT_LT_REVISION = @LIBGCRYPT_LT_REVISION@
 274 LIBGCRYPT_PUBKEY_CIPHERS = @LIBGCRYPT_PUBKEY_CIPHERS@
 275 LIBGCRYPT_THREAD_MODULES = @LIBGCRYPT_THREAD_MODULES@
 276 LIBOBJS = @LIBOBJS@
 277 LIBS = @LIBS@
 278 LIBTOOL = @LIBTOOL@
 279 LIPO = @LIPO@
 280 LN_S = @LN_S@
 281 LTLIBOBJS = @LTLIBOBJS@
 282 MAINT = @MAINT@
 283 MAKEINFO = @MAKEINFO@
 284 MANIFEST_TOOL = @MANIFEST_TOOL@
 285 MKDIR_P = @MKDIR_P@
 286 MPI_SFLAGS = @MPI_SFLAGS@
 287 NM = @NM@
 288 NMEDIT = @NMEDIT@
 289 NOEXECSTACK_FLAGS = @NOEXECSTACK_FLAGS@
 290 OBJDUMP = @OBJDUMP@
 291 OBJEXT = @OBJEXT@
 292 OTOOL = @OTOOL@
 293 OTOOL64 = @OTOOL64@
 294 PACKAGE = @PACKAGE@
 295 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 296 PACKAGE_NAME = @PACKAGE_NAME@
 297 PACKAGE_STRING = @PACKAGE_STRING@
 298 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 299 PACKAGE_URL = @PACKAGE_URL@
 300 PACKAGE_VERSION = @PACKAGE_VERSION@
 301 PATH_SEPARATOR = @PATH_SEPARATOR@
 302 PTH_CFLAGS = @PTH_CFLAGS@
 303 PTH_CONFIG = @PTH_CONFIG@
 304 PTH_LIBS = @PTH_LIBS@
 305 RANLIB = @RANLIB@
 306 RC = @RC@
 307 RUN_LARGE_DATA_TESTS = @RUN_LARGE_DATA_TESTS@
 308 SED = @SED@
 309 SET_MAKE = @SET_MAKE@
 310 SHELL = @SHELL@
 311 STRIP = @STRIP@
 312 SYSROOT = @SYSROOT@
 313 SYS_SOCKET_H = @SYS_SOCKET_H@
 314 VERSION = @VERSION@
 315 VERSION_NUMBER = @VERSION_NUMBER@
 316 abs_builddir = @abs_builddir@
 317 abs_srcdir = @abs_srcdir@
 318 abs_top_builddir = @abs_top_builddir@
 319 abs_top_srcdir = @abs_top_srcdir@
 320 ac_ct_AR = @ac_ct_AR@
 321 ac_ct_CC = @ac_ct_CC@
 322 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 323 am__include = @am__include@
 324 am__leading_dot = @am__leading_dot@
 325 am__quote = @am__quote@
 326 am__tar = @am__tar@
 327 am__untar = @am__untar@
 328 bindir = @bindir@
 329 build = @build@
 330 build_alias = @build_alias@
 331 build_cpu = @build_cpu@
 332 build_os = @build_os@
 333 build_vendor = @build_vendor@
 334 builddir = @builddir@
 335 datadir = @datadir@
 336 datarootdir = @datarootdir@
 337 docdir = @docdir@
 338 dvidir = @dvidir@
 339 emacs_local_vars_begin = @emacs_local_vars_begin@
 340 emacs_local_vars_end = @emacs_local_vars_end@
 341 emacs_local_vars_read_only = @emacs_local_vars_read_only@
 342 exec_prefix = @exec_prefix@
 343 host = @host@
 344 host_alias = @host_alias@
 345 host_cpu = @host_cpu@
 346 host_os = @host_os@
 347 host_vendor = @host_vendor@
 348 htmldir = @htmldir@
 349 includedir = @includedir@
 350 infodir = @infodir@
 351 install_sh = @install_sh@
 352 libdir = @libdir@
 353 libexecdir = @libexecdir@
 354 localedir = @localedir@
 355 localstatedir = @localstatedir@
 356 mandir = @mandir@
 357 mkdir_p = @mkdir_p@
 358 oldincludedir = @oldincludedir@
 359 pdfdir = @pdfdir@
 360 prefix = @prefix@
 361 program_transform_name = @program_transform_name@
 362 psdir = @psdir@
 363 sbindir = @sbindir@
 364 sharedstatedir = @sharedstatedir@
 365 srcdir = @srcdir@
 366 sysconfdir = @sysconfdir@
 367 target_alias = @target_alias@
 368 top_build_prefix = @top_build_prefix@
 369 top_builddir = @top_builddir@
 370 top_srcdir = @top_srcdir@
 371 EXTRA_DIST = README.apichanges HACKING DCO \
 372              libgcrypt-modules.eps fips-fsm.eps \
 373              libgcrypt-modules.png fips-fsm.png \
 374              libgcrypt-modules.pdf fips-fsm.pdf \
 375              yat2m.c
 376
 377 DISTCLEANFILES = gcrypt.cps yat2m-stamp.tmp yat2m-stamp $(myman_pages)
 378 CLEANFILES = yat2m
 379 BUILT_SOURCES = libgcrypt-modules.eps fips-fsm.eps \
 380                 libgcrypt-modules.png fips-fsm.png \
 381                 libgcrypt-modules.pdf fips-fsm.pdf
 382
 383 info_TEXINFOS = gcrypt.texi
 384 gcrypt_TEXINFOS = lgpl.texi gpl.texi libgcrypt-modules.fig fips-fsm.fig
 385 YAT2M_OPTIONS = -I $(srcdir) \
 386         --release "Libgcrypt @PACKAGE_VERSION@" --source "Libgcrypt"
 387
 388 myman_sources = gcrypt.texi
 389 myman_pages = hmac256.1
 390 man_MANS = $(myman_pages)
 391 all: $(BUILT_SOURCES)
 392         $(MAKE) $(AM_MAKEFLAGS) all-am
 393
 394 .SUFFIXES:
 395 .SUFFIXES: .dvi .eps .fig .html .info .jpg .pdf .png .ps .texi
 396 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 397         @for dep in $?; do \
 398           case '$(am__configure_deps)' in \
 399             *$$dep*) \
 400               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 401                 && { if test -f $@; then exit 0; else break; fi; }; \
 402               exit 1;; \
 403           esac; \
 404         done; \
 405         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 406         $(am__cd) $(top_srcdir) && \
 407           $(AUTOMAKE) --gnu doc/Makefile
 408 .PRECIOUS: Makefile
 409 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 410         @case '$?' in \
 411           *config.status*) \
 412             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 413           *) \
 414             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 415             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 416         esac;
 417
 418 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 419         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 420
 421 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 422         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 423 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 424         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 425 $(am__aclocal_m4_deps):
 426
 427 mostlyclean-libtool:
 428         -rm -f *.lo
 429
 430 clean-libtool:
 431         -rm -rf .libs _libs
 432
 433 .texi.info:
 434         $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
 435         am__cwd=`pwd` && $(am__cd) $(srcdir) && \
 436         rm -rf $$backupdir && mkdir $$backupdir && \
 437         if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 438           for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 439             if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 440           done; \
 441         else :; fi && \
 442         cd "$$am__cwd"; \
 443         if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 444          -o $@ $<; \
 445         then \
 446           rc=0; \
 447           $(am__cd) $(srcdir); \
 448         else \
 449           rc=$$?; \
 450           $(am__cd) $(srcdir) && \
 451           $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 452         fi; \
 453         rm -rf $$backupdir; exit $$rc
 454
 455 .texi.dvi:
 456         $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 457         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 458         $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
 459         $<
 460
 461 .texi.pdf:
 462         $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 463         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 464         $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
 465         $<
 466
 467 .texi.html:
 468         $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
 469         $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 470          -o $(@:.html=.htp) $<; \
 471         then \
 472           rm -rf $@ && mv $(@:.html=.htp) $@; \
 473         else \
 474           rm -rf $(@:.html=.htp); exit 1; \
 475         fi
 476 $(srcdir)/gcrypt.info: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS)
 477 gcrypt.dvi: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS)
 478 gcrypt.pdf: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS)
 479 gcrypt.html: gcrypt.texi $(srcdir)/version.texi $(gcrypt_TEXINFOS)
 480 $(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti
 481 $(srcdir)/stamp-vti: gcrypt.texi $(top_srcdir)/configure
 482         @(dir=.; test -f ./gcrypt.texi || dir=$(srcdir); \
 483         set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/gcrypt.texi`; \
 484         echo "@set UPDATED $$1 $$2 $$3"; \
 485         echo "@set UPDATED-MONTH $$2 $$3"; \
 486         echo "@set EDITION $(VERSION)"; \
 487         echo "@set VERSION $(VERSION)") > vti.tmp
 488         @cmp -s vti.tmp $(srcdir)/version.texi \
 489           || (echo "Updating $(srcdir)/version.texi"; \
 490               cp vti.tmp $(srcdir)/version.texi)
 491         -@rm -f vti.tmp
 492         @cp $(srcdir)/version.texi $@
 493
 494 mostlyclean-vti:
 495         -rm -f vti.tmp
 496
 497 maintainer-clean-vti:
 498 @MAINTAINER_MODE_TRUE@  -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
 499 .dvi.ps:
 500         $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 501         $(DVIPS) $(AM_V_texinfo) -o $@ $<
 502
 503 uninstall-dvi-am:
 504         @$(NORMAL_UNINSTALL)
 505         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 506         for p in $$list; do \
 507           $(am__strip_dir) \
 508           echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
 509           rm -f "$(DESTDIR)$(dvidir)/$$f"; \
 510         done
 511
 512 uninstall-html-am:
 513         @$(NORMAL_UNINSTALL)
 514         @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
 515         for p in $$list; do \
 516           $(am__strip_dir) \
 517           echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
 518           rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
 519         done
 520
 521 uninstall-info-am:
 522         @$(PRE_UNINSTALL)
 523         @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
 524           list='$(INFO_DEPS)'; \
 525           for file in $$list; do \
 526             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 527             echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
 528             if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
 529             then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
 530           done; \
 531         else :; fi
 532         @$(NORMAL_UNINSTALL)
 533         @list='$(INFO_DEPS)'; \
 534         for file in $$list; do \
 535           relfile=`echo "$$file" | sed 's|^.*/||'`; \
 536           relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
 537           (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
 538              echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
 539              rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
 540            else :; fi); \
 541         done
 542
 543 uninstall-pdf-am:
 544         @$(NORMAL_UNINSTALL)
 545         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 546         for p in $$list; do \
 547           $(am__strip_dir) \
 548           echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
 549           rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
 550         done
 551
 552 uninstall-ps-am:
 553         @$(NORMAL_UNINSTALL)
 554         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 555         for p in $$list; do \
 556           $(am__strip_dir) \
 557           echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
 558           rm -f "$(DESTDIR)$(psdir)/$$f"; \
 559         done
 560
 561 dist-info: $(INFO_DEPS)
 562         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 563         list='$(INFO_DEPS)'; \
 564         for base in $$list; do \
 565           case $$base in \
 566             $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
 567           esac; \
 568           if test -f $$base; then d=.; else d=$(srcdir); fi; \
 569           base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
 570           for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
 571             if test -f $$file; then \
 572               relfile=`expr "$$file" : "$$d/\(.*\)"`; \
 573               test -f "$(distdir)/$$relfile" || \
 574                 cp -p $$file "$(distdir)/$$relfile"; \
 575             else :; fi; \
 576           done; \
 577         done
 578
 579 mostlyclean-aminfo:
 580         -rm -rf gcrypt.t2d gcrypt.t2p
 581
 582 clean-aminfo:
 583         -test -z "gcrypt.dvi gcrypt.pdf gcrypt.ps gcrypt.html" \
 584         || rm -rf gcrypt.dvi gcrypt.pdf gcrypt.ps gcrypt.html
 585
 586 maintainer-clean-aminfo:
 587         @list='$(INFO_DEPS)'; for i in $$list; do \
 588           i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
 589           echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 590           rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 591         done
 592 install-man1: $(man_MANS)
 593         @$(NORMAL_INSTALL)
 594         @list1=''; \
 595         list2='$(man_MANS)'; \
 596         test -n "$(man1dir)" \
 597           && test -n "`echo $$list1$$list2`" \
 598           || exit 0; \
 599         echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
 600         $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
 601         { for i in $$list1; do echo "$$i"; done;  \
 602         if test -n "$$list2"; then \
 603           for i in $$list2; do echo "$$i"; done \
 604             | sed -n '/\.1[a-z]*$$/p'; \
 605         fi; \
 606         } | while read p; do \
 607           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 608           echo "$$d$$p"; echo "$$p"; \
 609         done | \
 610         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 611               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 612         sed 'N;N;s,\n, ,g' | { \
 613         list=; while read file base inst; do \
 614           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 615             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 616             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 617           fi; \
 618         done; \
 619         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 620         while read files; do \
 621           test -z "$$files" || { \
 622             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 623             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 624         done; }
 625
 626 uninstall-man1:
 627         @$(NORMAL_UNINSTALL)
 628         @list=''; test -n "$(man1dir)" || exit 0; \
 629         files=`{ for i in $$list; do echo "$$i"; done; \
 630         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 631           sed -n '/\.1[a-z]*$$/p'; \
 632         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 633               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 634         dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 635 tags TAGS:
 636
 637 ctags CTAGS:
 638
 639 cscope cscopelist:
 640
 641
 642 distdir: $(DISTFILES)
 643         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 644         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 645         list='$(DISTFILES)'; \
 646           dist_files=`for file in $$list; do echo $$file; done | \
 647           sed -e "s|^$$srcdirstrip/||;t" \
 648               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 649         case $$dist_files in \
 650           */*) $(MKDIR_P) `echo "$$dist_files" | \
 651                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 652                            sort -u` ;; \
 653         esac; \
 654         for file in $$dist_files; do \
 655           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 656           if test -d $$d/$$file; then \
 657             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 658             if test -d "$(distdir)/$$file"; then \
 659               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 660             fi; \
 661             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 662               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 663               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 664             fi; \
 665             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 666           else \
 667             test -f "$(distdir)/$$file" \
 668             || cp -p $$d/$$file "$(distdir)/$$file" \
 669             || exit 1; \
 670           fi; \
 671         done
 672         $(MAKE) $(AM_MAKEFLAGS) \
 673           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 674           dist-info
 675 check-am: all-am
 676 check: $(BUILT_SOURCES)
 677         $(MAKE) $(AM_MAKEFLAGS) check-am
 678 all-am: Makefile $(INFO_DEPS) $(MANS)
 679 installdirs:
 680         for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
 681           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 682         done
 683 install: $(BUILT_SOURCES)
 684         $(MAKE) $(AM_MAKEFLAGS) install-am
 685 install-exec: install-exec-am
 686 install-data: install-data-am
 687 uninstall: uninstall-am
 688
 689 install-am: all-am
 690         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 691
 692 installcheck: installcheck-am
 693 install-strip:
 694         if test -z '$(STRIP)'; then \
 695           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 696             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 697               install; \
 698         else \
 699           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 700             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 701             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 702         fi
 703 mostlyclean-generic:
 704
 705 clean-generic:
 706         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 707
 708 distclean-generic:
 709         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 710         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 711         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 712
 713 maintainer-clean-generic:
 714         @echo "This command is intended for maintainers to use"
 715         @echo "it deletes files that may require special tools to rebuild."
 716         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
 717 clean: clean-am
 718
 719 clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
 720
 721 distclean: distclean-am
 722         -rm -f Makefile
 723 distclean-am: clean-am distclean-generic
 724
 725 dvi: dvi-am
 726
 727 dvi-am: $(DVIS)
 728
 729 html: html-am
 730
 731 html-am: $(HTMLS)
 732
 733 info: info-am
 734
 735 info-am: $(INFO_DEPS)
 736
 737 install-data-am: install-info-am install-man
 738
 739 install-dvi: install-dvi-am
 740
 741 install-dvi-am: $(DVIS)
 742         @$(NORMAL_INSTALL)
 743         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 744         if test -n "$$list"; then \
 745           echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
 746           $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
 747         fi; \
 748         for p in $$list; do \
 749           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 750           echo "$$d$$p"; \
 751         done | $(am__base_list) | \
 752         while read files; do \
 753           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 754           $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 755         done
 756 install-exec-am:
 757
 758 install-html: install-html-am
 759
 760 install-html-am: $(HTMLS)
 761         @$(NORMAL_INSTALL)
 762         @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
 763         if test -n "$$list"; then \
 764           echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
 765           $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
 766         fi; \
 767         for p in $$list; do \
 768           if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 769           $(am__strip_dir) \
 770           d2=$$d$$p; \
 771           if test -d "$$d2"; then \
 772             echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 773             $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 774             echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 775             $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 776           else \
 777             list2="$$list2 $$d2"; \
 778           fi; \
 779         done; \
 780         test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
 781         while read files; do \
 782           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 783           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 784         done; }
 785 install-info: install-info-am
 786
 787 install-info-am: $(INFO_DEPS)
 788         @$(NORMAL_INSTALL)
 789         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 790         list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 791         if test -n "$$list"; then \
 792           echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
 793           $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
 794         fi; \
 795         for file in $$list; do \
 796           case $$file in \
 797             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 798           esac; \
 799           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 800           file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
 801           for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
 802                        $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
 803             if test -f $$ifile; then \
 804               echo "$$ifile"; \
 805             else : ; fi; \
 806           done; \
 807         done | $(am__base_list) | \
 808         while read files; do \
 809           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 810           $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 811         @$(POST_INSTALL)
 812         @if $(am__can_run_installinfo); then \
 813           list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 814           for file in $$list; do \
 815             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 816             echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 817             install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 818           done; \
 819         else : ; fi
 820 install-man: install-man1
 821
 822 install-pdf: install-pdf-am
 823
 824 install-pdf-am: $(PDFS)
 825         @$(NORMAL_INSTALL)
 826         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 827         if test -n "$$list"; then \
 828           echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
 829           $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
 830         fi; \
 831         for p in $$list; do \
 832           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 833           echo "$$d$$p"; \
 834         done | $(am__base_list) | \
 835         while read files; do \
 836           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
 837           $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 838 install-ps: install-ps-am
 839
 840 install-ps-am: $(PSS)
 841         @$(NORMAL_INSTALL)
 842         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 843         if test -n "$$list"; then \
 844           echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
 845           $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
 846         fi; \
 847         for p in $$list; do \
 848           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 849           echo "$$d$$p"; \
 850         done | $(am__base_list) | \
 851         while read files; do \
 852           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
 853           $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
 854 installcheck-am:
 855
 856 maintainer-clean: maintainer-clean-am
 857         -rm -f Makefile
 858 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
 859         maintainer-clean-generic maintainer-clean-vti
 860
 861 mostlyclean: mostlyclean-am
 862
 863 mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
 864         mostlyclean-libtool mostlyclean-vti
 865
 866 pdf: pdf-am
 867
 868 pdf-am: $(PDFS)
 869
 870 ps: ps-am
 871
 872 ps-am: $(PSS)
 873
 874 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
 875         uninstall-man uninstall-pdf-am uninstall-ps-am
 876
 877 uninstall-man: uninstall-man1
 878
 879 .MAKE: all check install install-am install-strip
 880
 881 .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
 882         clean-libtool cscopelist-am ctags-am dist-info distclean \
 883         distclean-generic distclean-libtool distdir dvi dvi-am html \
 884         html-am info info-am install install-am install-data \
 885         install-data-am install-dvi install-dvi-am install-exec \
 886         install-exec-am install-html install-html-am install-info \
 887         install-info-am install-man install-man1 install-pdf \
 888         install-pdf-am install-ps install-ps-am install-strip \
 889         installcheck installcheck-am installdirs maintainer-clean \
 890         maintainer-clean-aminfo maintainer-clean-generic \
 891         maintainer-clean-vti mostlyclean mostlyclean-aminfo \
 892         mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
 893         pdf-am ps ps-am tags-am uninstall uninstall-am \
 894         uninstall-dvi-am uninstall-html-am uninstall-info-am \
 895         uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am
 896
 897
 898 yat2m: yat2m.c
 899         $(CC_FOR_BUILD) -o $@ $(srcdir)/yat2m.c
 900
 901 .fig.png:
 902         fig2dev -L png `test -f '$<' || echo '$(srcdir)/'`$< $@
 903
 904 .fig.jpg:
 905         fig2dev -L jpg `test -f '$<' || echo '$(srcdir)/'`$< $@
 906
 907 .fig.eps:
 908         fig2dev -L eps `test -f '$<' || echo '$(srcdir)/'`$< $@
 909
 910 .fig.pdf:
 911         fig2dev -L pdf `test -f '$<' || echo '$(srcdir)/'`$< $@
 912
 913 yat2m-stamp: $(myman_sources)
 914         @rm -f yat2m-stamp.tmp
 915         @touch yat2m-stamp.tmp
 916         for file in $(myman_sources) ; do \
 917               ./yat2m $(YAT2M_OPTIONS) --store \
 918                   `test -f '$$file' || echo '$(srcdir)/'`$$file ; done
 919         @mv -f yat2m-stamp.tmp $@
 920
 921 yat2m-stamp: yat2m
 922
 923 $(myman_pages) : yat2m-stamp
 924         @if test -f $@; then :; else \
 925             trap 'rm -rf yat2m-stamp yat2m-lock' 1 2 13 15; \
 926                if mkdir yat2m-lock 2>/dev/null; then \
 927                  rm -f yat2m-stamp; \
 928                  $(MAKE) $(AM_MAKEFLAGS) yat2m-stamp; \
 929                  rmdir yat2m-lock; \
 930                else \
 931                  while test -d yat2m-lock; do sleep 1; done; \
 932                  test -f yat2m-stamp; exit $$?; \
 933                fi; \
 934              fi
 935
 936 # Make sure that gcrypt.texi is touched if any other source file has
 937 # been modified.  This is required so that the version.texi magic
 938 # updates the release date.
 939 gcrypt.texi : $(gcrypt_TEXINFOS)
 940         touch $(srcdir)/gcrypt.texi
 941
 942 online: gcrypt.html gcrypt.pdf gcrypt.info
 943         set -e; \
 944         echo "Uploading current manuals to www.gnupg.org ..."; \
 945         cp libgcrypt-modules.png gcrypt.html/; \
 946         cp fips-fsm.png gcrypt.html/; \
 947         user=werner ; dashdevel="" ; \
 948         if echo "@PACKAGE_VERSION@" | grep -- "-svn" >/dev/null; then \
 949           dashdevel="-devel" ; \
 950           cp gcrypt.pdf gcrypt.html/; \
 951           cp gcrypt.info gcrypt.html/; \
 952         else \
 953           rsync -v gcrypt.pdf gcrypt.info \
 954                $${user}@trithemius.gnupg.org:webspace/manuals/ ; \
 955         fi ; \
 956         cd gcrypt.html ; \
 957         rsync -vr --exclude='.svn' .  \
 958           $${user}@trithemius.gnupg.org:webspace/manuals/gcrypt$${dashdevel}/
 959
 960 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 961 # Otherwise a system limit (for SysV at least) may be exceeded.
 962 .NOEXPORT: