1 Some of the changes listed in this file include issue tracking numbers
2 corresponding to tasks in the Qt Bug Tracker:
4 http://bugreports.qt-project.org/
6 Each of these identifiers can be entered in the bug tracker to obtain more
7 information about a particular change.
10 ****************************************************************************
11 * Source incompatible changes *
12 ****************************************************************************
16 * The signatures of the connectNotify() and disconnectNotify() functions
17 have changed. The functions now get passed a QMetaMethod that identifies
18 the signal, rather than a const char *.
20 - QSslCertificate::subjectInfo() and QSslCertificate::issuerInfo() now
21 return a QStringList instead of a QString
23 - QSslCertificate::isValid() has been deprecated. Originally it only checked
24 the certificate dates, but later checking for blacklisting was added. Now
25 there's a more specific QSslCertificate::isBlacklisted() method.
27 - Unite clipping support has been removed from QPainter. The alternative is
28 to unite QRegion's and using the result on QPainter.
30 - QLibrary::resolve() now returns a function pointer instead of a void
33 - QSslCertificate::alternateSubjectNames() is deprecated (but can be enabled
34 via QT_DISABLE_DEPRECATED_BEFORE), use
35 QSslCertificate::subjectAlternativeNames() instead.
37 - QLibraryInfo::buildKey() has been removed. Likewise, the QT_BUILD_KEY
38 preprocessor #define has also been removed. The build-key is obsolete
39 and is no longer necessary.
41 - QCoreApplication::translate() will no longer return the source text when
42 the translation is empty. Use lrelease -removeidentical for optimization.
44 - QTranslator subclasses need to adjust the signature of the virtual method
45 translate() in order to add the "int n = -1" argument.
47 - QString and QByteArray constructors that take a size argument will now treat
48 negative sizes to indicate nul-terminated strings (a nul-terminated array of
49 QChar, in the case of QString). In Qt 4, negative sizes were ignored and
50 result in empty QString and QByteArray, respectively. The size argument to
51 those constructors now has a default value of -1, thus replacing the separate
52 constructors that did the same.
54 - Qt::escape() is deprecated (but can be enabled via
55 QT_DISABLE_DEPRECATED_BEFORE), use QString::toHtmlEscaped() instead.
57 - QBool is gone. QString::contains, QByteArray::contains, and QList::contains
58 used to return an internal QBool class so that the Qt3 code
59 "if (a.contains() == 2)" wouldn't compile anymore. Such code cannot exist
60 in Qt4, so these methods return a bool now. If your code used the undocumented
61 QBool, simply replace it with bool.
63 - qIsDetached<> has been removed without replacement.
65 - The return type of QFlags<Enum>::operator int() now matches the Enum's underlying
66 type in signedness instead of always being 'int'. This was done in order to allow
67 QFlags over enums whose underlying type is unsigned (Qt::MouseButton is one such
71 * QMetaType::construct() has been renamed to QMetaType::create().
72 * QMetaType::unregisterType() has been removed.
73 * QMetaType now records if the type argument inherits QObject. This
74 can be used in scripting APIs, so that custom QObject subclasses
75 are treated as QObject pointers. In QtScript for example, this can
76 mean that QScriptValue.isQObject can be true where it was false before.
77 * QMetaType::QWidgetStar has been removed. Use qMetaTypeId<QWidget*>()
78 or QVariant::canConvert<QWidget*>() as appropriate.
81 * QMetaMethod::signature() has been renamed to QMetaMethod::methodSignature(),
82 and the return type has been changed to QByteArray. This was done to be able
83 to generate the signature string on demand, rather than always storing it in
85 * QMetaMethod::typeName() no longer returns an empty string when the return
86 type is void; it returns "void". The recommended way of checking whether a
87 method returns void is to compare the return value of QMetaMethod::returnType()
91 * Inconsistent constructor taking Qt::GlobalColor and producing QVariant(QColor)
92 instance was removed. Code constructing such variants can be migrated by
93 explicitly calling QColor constructor. For example from "QVariant(Qt::red)"
94 to "QVariant(QColor(Qt::red))"
95 * Similarly, implicit creation of QVariants from enum values Qt::BrushStyle,
96 Qt::PenStyle, and Qt::CursorShape have been removed. Create objects explicitly
97 or use static_cast<int>(Qt::SolidLine) to create a QVariant of type int with
98 the same value as the enum.
101 * The plain-text, xml and lightxml test output formats have been changed to
102 show a test result for every row of test data in data-driven tests. In
103 Qt4, only fails and skips were shown for individual data rows and passes
104 were not shown for individual data rows, preventing accurate calculation
105 of test run rates and pass rates.
106 * The QTRY_VERIFY and QTRY_COMPARE macros have been moved into QTestLib.
107 These macros formerly lived in tests/shared/util.h but are now provided
108 by including the <QtTest/QtTest> header. In addition,
109 QTRY_VERIFY_WITH_TIMEOUT and QTRY_COMPARE_WITH_TIMEOUT are provided,
110 allowing for specifying custom timeout values.
111 * The QTEST_NOOP_MAIN macro has been removed from the API. If a test is
112 known at compile-time to be inapplicable for a particular build it should
113 be omitted via .pro file logic, or the test should call QSKIP in the
114 initTestCase() method to skip the entire test and report a meaningful
115 explanation in the test log.
116 * The DEPENDS_ON macro has been removed from the API. This macro did nothing
117 and misled some users to believe that they could make test functions depend
118 on each other or impose an execution order on test functions.
119 * The QTest::qt_snprintf function has been removed from the API. This was an
120 internal testlib function that was exposed in the public API due to its use
121 in a public macro. Any calls to this function should be replaced by a call
122 to qsnprintf(), which comes from the <QtCore/QByteArray> header.
123 * The QTest::pixmapsAreEqual() function has been removed from the API.
124 Comparison of QPixmap objects should be done using QCOMPARE, which provides
125 more informative output in the event of a failure.
126 * The QSKIP macro no longer has the "mode" parameter, which caused problems
127 for calculating test metrics, as the SkipAll mode hid information about
128 what test data was skipped. Calling QSKIP in a test function now behaves
129 like SkipSingle -- skipping a non-data-driven test function or skipping
130 only the current data row of a data-driven test function. Every skipped
131 data row is now reported in the test log.
132 * The qCompare() function template was both overloaded and specialised, which
133 made it almost impossible to specialise the correct primary template and
134 could lead to indecipherable error messages or surprising overload resolution
135 (such as going via qCompare(QFlags<void*>,int) to satisfy a request for
136 qCompare<void*>()). Now, specialisation has been replaced by overloading.
137 As a consquence, code such as qCompare<QString>(l, r) will no longer use the
138 QString-specific implementation and may fail to compile. We recommend you
139 replace specialisations with overloading, too. Also, don't pass explicit
140 template arguments to qCompare (e.g. qCompare<QString>(l, r)), but let
141 overload resolution pick the correct one, and cast arguments in case of
142 ambiguous overloads (e.g. qCompare(QString(l), r)). The resulting code will
143 continue to work against older QtTestlib versions.
145 - The QSsl::TlsV1 enum value was renamed to QSsl::TlsV1_0 .
148 * Internal QAccessible::State enum value HasInvokeExtension removed
149 - QAccessibleInterface:
150 * The "child" integer parameters have been removed. This moves the api
151 to be closer to IAccessible2.
152 This means several functions lose their integer parameter:
153 text(Text t, int child) -> text(Text t), rect(int child) -> rect()
154 setText(Text t, int child, const QString &text) -> setText(Text t, const QString &text)
155 role(int child) -> role(), state(int child) -> state()
156 * parent() and child() was added in order to do hierarchical navigation.
157 * relations() was added as a replacement to relationTo()
158 * As a consequence of the above two points, navigate() was removed.
159 * Accessible-Action related functions have been removed. QAccessibleInterface
160 subclasses are expected to implement the QAccessibleActionInterface instead.
161 These functions have been removed:
162 QAccessibleInterface::userActionCount, QAccessibleInterface::actionText,
163 QAccessibleInterface::doAction
164 - QAccessibleEvent also loses the child parameter.
165 QAccessibleEvent(Type type, int child) -> QAccessibleEvent(Type type)
166 QAccessibleEvent::child() removed.
167 - QAccessibleActionInterface:
168 * Refactored to be based on action names. All functions have been changed from using
169 int parameters to strings.
171 - QSound has been moved from QtGui to QtMultimedia
173 - QTabletEvent::QTabletEvent does not take a hiResGlobalPos argument anymore,
174 as all coordinates are floating point based now.
178 * The DeviceType enum and deviceType() have been deprecated due to
179 the introduction of QTouchDevice.
181 * The signature of the constructor has changed. It now takes a
182 QTouchDevice pointer instead of just a DeviceType value.
184 * TouchPointState no longer includes TouchPointStateMask and
185 TouchPointPrimary. QTouchEvent::TouchPoint::isPrimary() has
188 * QWidget *widget() has been removed and is replaced by QObject
189 *target() in order to avoid QWidget dependencies.
191 * QEvent::TouchCancel has been introduced. On systems where it makes
192 sense this event type can be used to differentiate between a
193 regular TouchEnd and abrupt touch sequence cancellations caused by
194 the compositor, for example when a system gesture gets recognized.
198 * Q_DECLARE_METATYPE(Foo*) now requires that Foo is fully defined. In
199 cases where a forward declared type should be used as a metatype,
200 Q_DECLARE_OPAQUE_POINTER(Foo*) can be used to allow that.
201 * Similarly, Q_DECLARE_METATYPE(QSharedPointer<Foo>), and
202 Q_DECLARE_METATYPE(QWeakPointer<Foo>) require Foo to be fully defined. Again
203 though, Q_DECLARE_OPAQUE_POINTER(Foo*) can be used to allow that.
207 * The signature of the createEditor and valuePropertyName methods
208 have been changed to take arguments of type int instead of QVariant::Type.
210 - QModelIndex/QAbstractItemModel
212 * The integer value that can be stored in a QModelIndex is now of type
213 quintptr to match the size of the internal storage location.
214 * The createIndex() method now only provides the void* and quintptr
215 overloads, making calls with a literal 0 (createIndex(row, col, 0))
216 ambiguous. Either cast (quintptr(0)) or omit the third argument
217 (to get the void* overload).
219 - QWindowSystemInterface:
221 * The signature of all handleTouchEvent() variants have changed,
222 taking a QTouchDevice* instead of just a DeviceType value.
223 Platform or generic plug-ins have to create and register at least
224 one QTouchDevice before sending the first touch event.
226 * The event type parameter is removed from handleTouchEvent().
228 - The previously exported function qt_translateRawTouchEvent() has been removed.
229 Use QWindowSystemInterface::handleTouchEvent() instead.
231 - QAbstractEventDispatcher
233 * The signature for the pure-virtual registerTimer() has changed. Subclasses
234 of QAbstractEventDispatcher will need to be updated to reimplement the new
235 pure-virtual 'virtual void registerTimer(int timerId, int interval,
236 Qt::TimerType timerType, QObject *object) = 0;'
238 * QAbstractEventDispatcher::TimerInfo is no longer a QPair<int, int>. It is
239 now a struct with 3 members: struct TimerInfo { int timerId; int interval;
240 Qt::TimerType timerType; }; Reimplementations of
241 QAbstractEventDispatcher::registeredTimers() will need to be updated to pass
242 3 arguments to the TimerInfo constructor (instead of 2).
246 * Removed implicit conversion operator QUuid::operator QString(), instead
247 QUuid::toString() function should be used.
249 - The QHttp, QHttpHeader, QHttpResponseHeader and QHttpRequestHeader classes have
250 been removed, QNetworkAccessManager should be used instead.
252 - The QFtp and QUrlInfo classes are no longer exported, QNetworkAccessManager should be used
253 instead. These classes are available in a separate module, qtftp.
257 * On Windows, QProcess::ForwardedChannels will not forward the output of GUI
258 applications anymore, if they do not create a console.
260 - QAbstractSocket's connectToHost() and disconnectFromHost() are now virtual and
261 connectToHostImplementation() and disconnectFromHostImplementation() don't exist.
263 - QTcpServer::incomingConnection() now takes a qintptr instead of an int.
265 - QNetworkConfiguration::bearerName() removed, and bearerTypeName() should be used.
267 - QDir::convertSeparators() (deprecated since Qt 4.2) has been removed. Use
268 QDir::toNativeSeparators() instead.
270 - QIconEngineV2 was merged into QIconEngine
271 You might need to adjust your code if it used a QIconEngine.
274 * Projects which explicitly set an empty TARGET are considered broken now.
275 * The makespec and .qmake.cache do not see build pass specific variables any more.
276 * load()/include() with a target namespace and infile()/$$fromfile() now start with
277 an entirely pristine context.
278 * Configure's -sysroot and -hostprefix are now handled slightly differently.
279 The QT_INSTALL_... properties are now automatically prefixed with the sysroot;
280 the raw values are available as QT_INSTALL_.../raw and the sysroot as QT_SYSROOT.
281 The new QT_HOST_... properties can be used to refer to the Qt host tools.
282 * Several functions and built-in variables were modified to return normalized paths.
283 * The -(no-)exception flags in configure have been removed. Qt modules are now compiled
284 without exceptions by default, as they do not use them and can neither handle them
285 properly. Qt Core still has exceptions enabled to correctly throw bad_alloc exceptions
287 Whether code should be compiled with exception support enabled or disabled can be
288 controlled by a CONFIG += exceptions/exceptions_off setting in the .pro file.
290 - QTextCodecPlugin has been removed since it is no longer used. All text codecs
291 are now built into QtCore.
293 - QDir::NoDotAndDotDot is QDir::NoDot|QDir::NoDotDot therefore there is no need
294 to use or check both.
296 - QFSFileEngine, QAbstractFileEngine, QAbstractFileEngineIterator and
297 QAbstractFileEngineHandler were removed from public API and are no longer
298 exported. They may temporarily live as private implementation details, but
299 they may be altogether dropped or otherwise changed at will in the future.
302 * toShort(), toUShort(), toInt(), toUInt(), toLongLong() and toULongLong() no
303 longer take a parameter for base, they will only perform localised base 10
304 conversions. For converting other bases use the QString methods instead.
306 - QSystemLocale has been removed from the public API.
308 - QSqlQueryModel::indexInQuery() is now virtual. See note below under QtSql.
310 - QSqlDriver::subscribeToNotification, unsubscribeFromNotification,
311 subscribedToNotifications, isIdentifierEscaped, and stripDelimiters
312 are now virtual. See note below under QtSql.
314 - qMacVersion() has been removed. Use QSysInfo::macVersion() or
315 QSysInfo::MacintoshVersion instead.
317 - QColorDialog::customColor() now returns a QColor value instead of QRgb.
318 QColorDialog::setCustomColor() and QColorDialog::setStandardColor() now
319 take a QColor value for their second parameter instead of QRgb.
321 - QPageSetupDialog has had the PageSetupDialogOption enum and the api to
322 set and get the enum removed as none of the Options are used any more.
324 - QAbstractPageSetupDialog has been removed.
326 ****************************************************************************
328 ****************************************************************************
333 - The directory structure of the qtbase unit-tests has been reworked to
334 more closely match the directory structure of the code under test.
335 Integration tests have been moved to tests/auto/integrationtests.
337 - Qt is compiled with C++11 support enabled by default, provided the compiler
338 supports C++11. Qmake based projects can enable C++11 support explicitly
339 using 'CONFIG+=c++11' in their .pro files. To enable it conditionally, use
340 'contains(QT_CONFIG,c++11):CONFIG+=c++11'. This will enable C++11 support
341 only if Qt was built with C++11 support.
343 - The Unicode Data and Algorithms has been updated to match the
344 Unicode Standard of version 6.2. For more information see http://www.unicode.org/
346 Third party components
347 ----------------------
349 - SQLITE_ENABLE_FTS3,SQLITE_ENABLE_FTS3_PARENTHESIS and SQLITE_ENABLE_RTREE
350 flags are now enabled by default on all platforms, for the sqlite3 copy under
351 the 3rdparty directory.
354 ****************************************************************************
356 ****************************************************************************
360 * [QTBUG-12144], [QTBUG-18360] The QChar methods are now able to handle the full range
361 of Unicode codepoints defined by the Unicode Standard of version 6.2.
362 QChar::isPrint() will no longer return a false positives for
363 the Unicode format characters, surrogates, and private use characters.
365 * Drop a bogus QChar::NoCategory enum value; the proper QChar::Other_NotAssigned
366 value is returned for an unassigned codepoints now.
368 * layoutAboutToBeChanged is no longer emitted by QAbstractItemModel::beginMoveRows.
369 layoutChanged is no longer emitted by QAbstractItemModel::endMoveRows. Proxy models
370 should now also connect to (and disconnect from) the rowsAboutToBeMoved and
373 * The QAbstractItemModel::sibling method was made virtual, allowing implementations
374 to optimize based on internal data.
376 * The default value of the property QSortFilterProxyModel::dynamicSortFilter was
377 changed from false to true.
379 * The signature of the virtual QAbstractItemView::dataChanged method has changed to
380 include the roles which have changed. The signature is consistent with the dataChanged
383 * QFileSystemWatcher is now able to return failure in case of errors whilst
384 altering the watchlist in both the singular and QStringList overloads of
385 addPath and removePath.
387 * QString::mid, QString::midRef and QByteArray::mid, if the position passed
388 is equal to the length (that is, right after the last character/byte),
389 now return an empty QString, QStringRef or QByteArray respectively.
390 in Qt 4 they returned a null QString or a null QStringRef.
392 * QString methods toLongLong(), toULongLong(), toLong(), toULong(), toInt(),
393 toUInt(), toShort(), toUShort(), toDouble(), and toFloat() no longer use the
394 default or system locale, they will always use the C locale. This is to
395 guarantee consistent default conversion of strings. For locale-aware conversions
396 use the equivalent QLocale methods.
398 * QDate, QTime, and QDateTime have undergone important behavioural changes:
399 * QDate only implements the Gregorian calendar, the switch to the Julian
400 calendar before 1582 has been removed. This means all QDate methods will
401 return different results for dates prior to 15 October 1582, and there is
402 no longer a gap between 4 October 1582 and 15 October 1582.
403 * QDate::setYMD() is deprecated, use QDate::setDate() instead
404 * Most methods now apply strict validity checks and will return appropriate
405 and consistent values when invalid. For example, QDate::year() will return
406 0 and QDate::shortMonthName() will return QString().
407 * Adding days to a null QDate or seconds to a null QTime will no longer return
409 * QDate stores the Julian Day as a qint64 extending date support across a
410 more interesting range, see the class documentation for details.
411 * Conversion to YMD form dates is only accurate between to 4800 BCE to
413 * The QDate::addDays() and QDateTime::addDays() methods now take a qint64
414 * The QDate::daysTo() and QDateTime::daysTo() methods now return a qint64
416 * QTextCodec::codecForCStrings() and QTextCodec::setCodecForCStrings() have both
417 been removed. This was removed due to issues with breaking other code from
418 libraries, creating uncertainty/bugs in using QString easily, and (to a lesser
419 extent) performance issues.
421 * QTextCodec::codecForTr() and QTextCodec::setCodecForTr() have been removed.
422 QObject::trUtf8 and QCoreApplication::Encoding enum are now obsolete. Qt assumes
423 that the source code is encoded in UTF-8.
425 * QFile::setEncodingFunction and QFile::setDecodingFunction are obsolete and do
426 nothing in Qt 5. The QFile::encodeName and QFile::decodeName functions are now
427 hardcoded to operate on QString::fromLocal8Bit and QString::toLocal8Bit
428 only. Therefore, it's still possible to obtain the old behaviour by calling
429 QTextCodec::setCodecForLocale. However, that is not recommended: new code
430 should not make assumptions about the filesystem encoding and older code should
431 have those assumptions removed.
433 * QIntValidator and QDoubleValidator no longer fall back to using the C locale if
434 the requested locale fails to validate the input.
436 * A new set of classes for doing pattern matching with Perl-compatible regular
437 expressions has been added: QRegularExpression, QRegularExpressionMatch and
438 QRegularExpressionMatchIterator. They aim to replace QRegExp with a more
439 powerful and flexible regular expression engine.
441 * QEvent::AccessibilityPrepare, AccessibilityHelp and AccessibilityDescription removed:
442 * The enum values simply didn't make sense in the first place and should simply be dropped.
444 * Filtering of native events (QCoreApplication::setEventFilter, as well as
445 QApplication::x11EventFilter/macEventFilter/qwsEventFilter/winEventFilter) have been replaced
446 with QCoreApplication::installNativeEventFilter and removeNativeEventFilter,
447 for an API much closer to QEvent filtering. Note that the native events that can be
448 filtered this way depend on which QPA backend is chosen, at runtime. On X11, XEvents are
449 not used anymore, and have been replaced with xcb_generic_event_t due to the switch to
450 XCB, which requires porting the application code to XCB as well.
452 * [QTBUG-23529] QHash is now more resilient to a family of denial of service
453 attacks exploiting algorithmic complexity, by supporting two-arguments overloads
454 of the qHash() hashing function.
456 * [QTBUG-4844] QObject::disconnectNotify() is now called when a receiver is destroyed.
459 - [QTBUG-15430] Added a QStateMachine constructor that takes a ChildMode parameter.
460 - [QTBUG-17975] Delayed event posting now works from secondary threads.
461 - [QTBUG-19789] Signal transitions now work correctly when the sender is in a different thread.
462 - [QTBUG-20362] Property assignments now work as expected with nested, parallel states.
463 - [QTBUG-22931] The root state can now be a parallel state group.
464 - [QTBUG-24307] The initial state is now entered before the started() signal is emitted.
465 - [QTBUG-25959] State entry and exit order is now SCXML spec-compliant.
467 * qDebug(), qWarning(), qCritical(), and qFatal() were changed to macros that track the origin
468 of the message in source code. Whether this and other meta-information is printed can be
469 configured (for the default message handler) by setting the new QT_MESSAGE_PATTERN environment
470 variable. qInstallMsgHandler() has been deprecated, and should be replaced with
471 qInstallMessageHandler().
473 * QTextBoundaryFinder
474 - [QTBUG-6498] The word start and word end boundaries detection is now
475 unaware of surrounding white space characters.
476 - SoftHyphen enum value has been added to specify a line break opportunity
477 at a soft hyphen (SHY) character.
478 - MandatoryBreak enum value has been added to specify a mandatory (aka "hard") line breaks.
479 - StartWord/EndWord enum values has been logically replaced with StartOfItem/EndOfItem ones
480 to mention they are not about the word boundaries only.
484 * Accessibility has been refactored. The hierachy of accessible objects is implemented via
485 proper parent/child functions instead of using navigate which has been deprecated for this purpose.
486 Table and cell interfaces have been added to qaccessible2.h
488 * Touch events and points have been extended to hold additional
489 information like capability flags, point-specific flags, velocity,
492 * A new set of enabler classes have been added, most importantly QWindow, QScreen,
493 QSurfaceFormat, and QOpenGLContext.
495 * Most of the useful QtOpenGL classes have been polished and moved into
496 QtGui. See QOpenGLFramebufferObject, QOpenGLShaderProgram,
497 QOpenGLFunctions, etc.
499 * QOpenGLPaintDevice has been added to be able to use QPainter to render into
500 the currently bound context.
502 * Behavioral change in QImage::fill() on an image with format Format_RGB888:
503 For consistency with RGB32 and other 32-bit formats, function now expects
504 image data in RGB layout as opposed to BGR layout.
506 * Behavioral change in QImage and QPixmap load()/loadFromData() on a non-null image:
507 If load() or loadFromData() fails to load the image (returns false) then
508 the existent image data will be invalidated, so that isNull() is guaranteed
509 to return true in this case.
511 * Behavioral change regarding QPainter fill rules when not using antialiased
512 painting: The fill rules have changed so that the aliased and antialiased
513 coordinate systems match. Earlier there used to be an offset of slightly less
514 than half a pixel when doing sub-pixel rendering, in order to be consistent
515 with the old X11 paint engine. The new behavior should be more predictable and
516 gives the same consistent rounding for images / pixmaps as for paths and
517 rectangle filling. It's possible to still get the old behavior by setting the
518 QPainter::Qt4CompatiblePainting render hint.
522 * QInputContext removed as well as related getters and setters on QWidget and QApplication.
523 Input contexts are now platform specific.
525 * QInputDialog::getInteger() has been obsoleted. Use QInputDialog::getInt() instead.
527 * In Qt 4, QStyle::standardIconImplementation() and layoutSpacingImplementation()
528 were introduced instead of making the corresponding methods virtual due to binary
529 compatibility reasons. QStyle::standardIcon() and layoutSpacing() have been made
530 (pure) virtual in Qt 5.
532 * In Qt 4, many QStyleOption subclasses were introduced in order to keep
533 binary compatibility -- QStyleOption was designed to be extended this way,
534 in fact it embeds a version number. In Qt 5 the various QStyleOption*V{2,3,4}
535 classes have been removed, and their members merged into the respective
536 base classes. Those classes were left as typedefs to keep existing code
537 working. Still, some minor adjustements could be necessary, especially in code
538 that uses QStyleOption directly and does not initialize all the members using
539 the proper Qt API: due to the version bump, QStyle will try to use the additional
540 QStyleOption members, which are left default-initialized.
542 * QHeaderView - The following functions have been obsoleted.
544 * void setMovable(bool movable) - use void setSectionsMovable(bool movable) instead.
546 * bool isMovable() const - use bool sectionsMovable() const instead.
548 * void setClickable(bool clickable) - use void setSectionsClickable(bool clickable) instead.
550 * bool isClickable() const - use bool sectionsClickable() instead.
552 * void setResizeMode(int logicalindex, ResizeMode mode) -
553 use setSectionResizeMode(logicalindex, mode) instead.
555 * ResizeMode resizeMode(int logicalindex) const -
556 use sectionResizeMode(int logicalindex) instead.
558 * QDateEdit and QTimeEdit have re-gained a USER property. These were originally removed
559 before Qt 4.7.0, and are re-added for 5.0. This means that the userProperty for
560 those classes are now QDate and QTime respectively, not QDateTime as they have been
561 for the 4.7 and 4.8 releases.
563 * QGraphicsItem and derived classes - Passing a QGraphicsScene in the items constructor
564 is no longer supported. Construct the item without a scene and then call
565 QGraphicsScene::addItem() to add the item to the scene.
567 * QAbstractItemView and derived classes only emit the clicked() signal on left click now,
568 instead of on all mouse clicks.
570 * QProxyModel has been removed. It is deprecated since early Qt 4 versions and replaced
571 by QAbstractProxyModel and related classes. A copy of QProxyModel is available
572 in the UiHelpers library.
574 * [QTBUG-20503] QFileSystemModel no longer masks out write permissions from the permissions
575 returned from permissions() or data(FilePermissions), even if in read-only mode
576 (QFileSystemModel::isReadOnly()).
580 * QHostAddress::isLoopback() API added. Returns true if the address is
581 one of the IP loopback addresses.
583 * QSslCertificate::serialNumber() now always returns the serial number in
586 * The openssl network backend now reads the ssl configuration file allowing
587 the use of openssl engines.
591 * QtDBus now generates property annotations for the Qt type names
592 in the org.qtproject.QtDBus namespace. When parsing such annotations
593 both the old and new namespaces are accepted.
595 * QtDBus error codes have been updated to be on the org.qtproject.QtDBus.Error
601 * QtConcurrent is no longer in QtCore, but forms its own library now.
602 QMake-based projects can use
604 to include the new library.
606 * QtConcurrent::Exception has been renamed to QException, and is still in QtCore.
607 Ditto QtConcurrent::UnhandledException.
612 * Most of the classes in this module (with the notable exception of QGLWidget)
613 now have equivalents in QtGui, along with the naming change QGL -> QOpenGL.
614 The classes in QtOpenGL that have equivalents in QtGui can now be considered
616 * QGLPixelBuffer is now deprecated and implemented in terms of a hidden
617 QGLWidget and a QOpenGLFramebufferObject. It is recommended that applications
618 using QGLPixelBuffer for offscreen rendering to a texture switch to using
619 QOpenGLFramebufferObject directly instead, for improved performance.
620 * The default major version of QGLFormat has been changed to 2 to be aligned
621 with QSurfaceFormat. Applications that want to use a different version should
622 explicitly request it using QGLFormat::setVersion().
626 * [QTBUG-2124] Added default conversion for long and unsigned long.
627 * [QTBUG-6133] Fixed QScriptContextInfo::functionMetaIndex() for overloaded
629 * [QTBUG-15213] Doc: Added missing properties to the ECMAScript reference.
630 * [QTBUG-15956] Doc: Removed wrong information about Error .stack properties.
631 * [QTBUG-17915] Fixed a crash when a JS property descriptor was only partially
633 * [QTBUG-18188] Fixed a regression that caused contexts created by
634 QScriptEngine::pushContext() to inherit the parent context's scope.
635 * [QTBUG-18201] Suppressed 'LEAK' messages on stderr at application exit.
636 * [QTBUG-20378] Fixed QtScriptTools compilation when some features are disabled.
637 * [QTBUG-20845] Fixed a precision bug in the calculator example.
638 * [QTBUG-21548] Fixed a crash in QScriptEngineDebugger when the QScriptEngine
639 being debugged was deleted.
640 * [QTBUG-21760] Fixed a crash when accessing QObject properties through an
642 * [QTBUG-21896] Fixed a crash when converting an invalid JS value to a string.
643 * [QTBUG-21993] Fixed a bug that caused QObject wrapper objects created with
644 the PreferExistingWrapperObject option to not be garbage collected, even if
645 the object was not referenced anywhere in the scripting environment.
646 * [QTBUG-22152] Fixed build issue on Solaris.
647 * [QTBUG-23871] Fixed a JIT crash on x86-64 caused by out-of-range branch
649 * [QTBUG-26261] Fixed a crash when a queued signal handler no longer existed.
650 * [QTBUG-26590] Fixed a bug that caused QObjects with script connections to
651 not be garbage collected as expected.
655 * [QTBUG-20615] Autotests can now log test output to multiple destinations
656 and log formats simultaneously.
657 * [QTBUG-21645] QSignalSpy now handles QVariant signal parameters more
658 intuitively; the QVariant value is copied directly, instead of being
659 wrapped inside a new QVariant. This means that calling
660 qvariant_cast<QVariant>() on the QSignalSpy item (to "unwrap" the value)
661 is no longer required (but still works).
665 QSqlQueryModel/QSqlTableModel/QSqlRelationalTableModel
667 * The dataChanged() signal is now emitted for changes made to an inserted
668 record that has not yet been committed. Previously, dataChanged() was
669 suppressed in this case for OnRowChange and OnFieldChange. This was probably
670 an attempt to avoid trouble if setData() was called while handling
671 primeInsert(). By emitting dataChanged(), we ensure that all views are aware
674 * While handling primeInsert() signal, the record must be manipulated using
675 the provided reference. Do not attempt to manipulate the records using the
676 model methods setData() or setRecord().
678 * removeRows() no longer emits extra beforeDelete signal for out of range row.
680 * removeRows() now requires the whole range of targetted rows to be valid
681 before doing anything. Previously, it would remove what it could and
682 ignore the rest of the range.
684 * removeRows(), for OnFieldChange and OnRowChange, allows only 1 row to be
685 removed and only if there are no other changed rows.
687 * setRecord() and insertRecord()
688 -The generated flags from the source record are preserved in the model
689 and determine which fields are included when changes are applied to
691 -Require all fields to map correctly. Previously fields that didn't
692 map were simply ignored.
693 -For OnManualSubmit, insertRecord() no longer leaves behind an empty
694 row if setRecord() fails.
695 -setRecord() now automatically submits for OnRowChange.
697 * QSqlQueryModel::indexInQuery() is now virtual. See
698 QSqlTableModel::indexInQuery() as example of how to implement in a
701 * QSqlQueryMode::setQuery() emits fewer signals. The modelAboutToBeReset()
702 and modelReset() signals suffice to inform views that they must reinterrogate
705 * QSqlTableModel::selectRow(): This is a new method that refreshes a single
706 row in the model from the database.
708 * QSqlTableModel edit strategies OnFieldChange/OnRowChange QTBUG-2875
709 Previously, after changes were submitted in these edit strategies, select()
710 was called which removed and inserted all rows. This ruined navigation
711 in QTableView. Now, with these edit strategies, there is no implicit select()
712 done after committing. This includes deleted rows which remain in
713 the model as blank rows until the application calls select(). Instead,
714 selectRow() is called to refresh only the affected row.
716 * QSqlTableModel::isDirty(): New overloaded method to check whether model
717 has any changes to submit. QTBUG-3108
719 * QSqlTableModel::setData() and setRecord() no longer revert pending changes
720 that fail upon resubmitting for edit strategies OnFieldChange and OnRowChange.
721 Instead, pending (failed) changes cause new changes inappropriate to the
722 edit strategy to be refused. The application should resolve or revert pending
723 changes. insertRows() and insertRecord() also respect the edit strategy.
725 * QSqlTableModel::setData() and setRecord() in OnRowChange no longer have the
726 side effect of submitting the cached row when invoked on a different row.
728 * QSqlDriver::subscribeToNotification, unsubscribeFromNotification,
729 subscribedToNotifications, isIdentifierEscaped, and stripDelimiters
730 are now virtual. Their xxxImplemenation counterparts have been removed
731 now that QSqlDriver subclasses can reimplement these directly.
733 ****************************************************************************
735 ****************************************************************************
739 * QVariant::Bool type now mapped to integers 0/1 in SQL instead of strings
740 'true' and 'false'. Sqlite does not have a boolean column type and it is
741 customary to use integer. QTBUG-23895
745 * the error message returned in QSqlError::text() has the SQLSTATE error code
746 appended in parantheses.
748 ****************************************************************************
749 * Platform Specific Changes *
750 ****************************************************************************
758 * Accessibility framework uses IAccessible2
759 * ANGLE can be used to provide Open GL ES 2.0 (see http://code.google.com/p/angleproject/)
765 Qt for Embedded Linux
766 ---------------------
773 ****************************************************************************
774 * Compiler Specific Changes *
775 ****************************************************************************
778 ****************************************************************************
780 ****************************************************************************
784 * Remove qttest_p4.prf file. From now on we should explicitly enable the
785 things from it which we want. Autotest .pro files should stop using
786 'load(qttest_p4)' and start using 'CONFIG+=testcase' instead.
791 * [QTBUG-8926] [QTBUG-20440] Properties of type QStringList now have
792 translation attributes which apply to all items.
793 They are by default translatable.
802 * [QTBUG-20785] The moc now has a -b<file> option to #include an additional
803 file at the beginning of the generated file.
814 * QMAKE_MOC_OPTIONS variable is now available for passing additional parameters
820 * The Mac OS X -dwarf2 configure argument has been removed. DWARF2 is always
821 used on Mac OS X now.
826 ****************************************************************************
828 ****************************************************************************
829 - The text codecs that were previously plugins are now built into QtCore.
830 - Code using Q_EXPORT_PLUGIN macros will no longer compile. Use
831 Q_PLUGIN_METADATA instead. Note that this requires that the class
832 be default-constructible.
834 ****************************************************************************
835 * Important Behavior Changes *
836 ****************************************************************************
840 * The implementation of QPointer has been changed to use QWeakPointer. The
841 old guard mechanism has been removed. This causes a slight change
842 in behavior when using QPointer:
844 * When using QPointer on a QWidget (or a subclass of QWidget), previously
845 the QPointer would be cleared by the QWidget destructor. Now, the QPointer
846 is cleared by the QObject destructor (since this is when QWeakPointers are
847 cleared). Any QPointers tracking a widget will NOT be cleared before the
848 QWidget destructor destroys the children for the widget being tracked.
852 * QUrl has been changed to operate only on percent-encoded
853 forms. Fully-decoded forms, where the percent character stands for itself,
854 are no longer possible. For that reason, the getters and setters with
855 "encoded" in the name are deprecated, except for QUrl::toEncoded() and
858 QUrl now operates in a mode where it decodes as much as it can of the
859 percent-encoding sequences. In addition, the setter methods possess a mode
860 in which a '%' character not part of a percent-encoding sequence will cause
861 the parser to correct the input. Therefore, most software will not require
862 changes to adapt, since the getter methods will continue returning the
863 components in their most-decoded form as they did before and the setter
864 methods will accept input as they did before..
866 The most notable difference is when dealing with
867 QUrl::toString(). Previously, this function would return percent characters
868 in the URL by themselves. Now, it will return "%25", like
873 * Definition of QVariant::UserType changed. Currently it is the same as
874 QMetaType::User, which means that it points to the first registered custom
875 type, instead of a nonexistent type.
879 * Interpretation of QMetaType::Void was changed. Before, in some cases
880 it was returned as an invalid type id, but sometimes it was used as a valid
881 type (C++ "void"). In Qt5, new QMetaType::UnknownType was introduced to
882 distinguish between these two. QMetaType::UnknownType is an invalid type id
883 signaling that a type is unknown to QMetaType, and QMetaType::Void
884 is a valid type id of C++ void type. The difference will be visible for
885 example in call to QMetaType::typeName(), this function will return null for
886 QMetaType::UnknownType and a pointer to "void" string for
888 Please, notice that QMetaType::UnknownType has value 0, which previously was
889 reserved for QMetaType::Void.
894 * The static function QMessageBox::question has changed the default argument
895 for buttons. Before the default was to have an Ok button. That is changed
896 to having a yes and a no button.