1 # Example wpa_supplicant build time configuration
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cases, these lines should use += in order not
10 # to override previous values of the variables.
13 # Uncomment following two lines and fix the paths if you have installed OpenSSL
14 # or GnuTLS in non-default location
15 #CFLAGS += -I/usr/local/openssl/include
16 #LIBS += -L/usr/local/openssl/lib
18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
19 # the kerberos files are not in the default include path. Following line can be
20 # used to fix build issues on such systems (krb5.h not found).
21 #CFLAGS += -I/usr/include/kerberos
23 # Example configuration for various cross-compilation platforms
25 #### sveasoft (e.g., for Linksys WRT54G) ######################################
27 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
29 #CPPFLAGS += -I../src/include -I../../src/router/openssl/include
30 #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
31 ###############################################################################
33 #### openwrt (e.g., for Linksys WRT54G) #######################################
35 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
37 #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
38 # -I../WRT54GS/release/src/include
40 ###############################################################################
43 # Driver interface for Host AP driver
44 CONFIG_DRIVER_HOSTAP=y
46 # Driver interface for Agere driver
47 #CONFIG_DRIVER_HERMES=y
48 # Change include directories to match with the local setup
49 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
50 #CFLAGS += -I../../include/wireless
52 # Driver interface for madwifi driver
53 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
54 #CONFIG_DRIVER_MADWIFI=y
55 # Set include directory to the madwifi source tree
56 #CFLAGS += -I../../madwifi
58 # Driver interface for Prism54 driver
59 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
60 # for developers only)
61 #CONFIG_DRIVER_PRISM54=y
63 # Driver interface for ndiswrapper
64 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
65 #CONFIG_DRIVER_NDISWRAPPER=y
67 # Driver interface for Atmel driver
68 #CONFIG_DRIVER_ATMEL=y
70 # Driver interface for old Broadcom driver
71 # Please note that the newer Broadcom driver ("hybrid Linux driver") supports
72 # Linux wireless extensions and does not need (or even work) with the old
73 # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
74 #CONFIG_DRIVER_BROADCOM=y
75 # Example path for wlioctl.h; change to match your configuration
76 #CFLAGS += -I/opt/WRT54GS/release/src/include
78 # Driver interface for Intel ipw2100/2200 driver
79 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
82 # Driver interface for Ralink driver
83 #CONFIG_DRIVER_RALINK=y
85 # Driver interface for generic Linux wireless extensions
88 # Driver interface for Linux drivers using the nl80211 kernel interface
89 #CONFIG_DRIVER_NL80211=y
91 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
93 #CFLAGS += -I/usr/local/include
94 #LIBS += -L/usr/local/lib
96 # Driver interface for Windows NDIS
98 #CFLAGS += -I/usr/include/w32api/ddk
99 #LIBS += -L/usr/local/lib
100 # For native build using mingw
101 #CONFIG_NATIVE_WINDOWS=y
102 # Additional directories for cross-compilation on Linux host for mingw target
103 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
104 #LIBS += -L/opt/mingw/mingw32/lib
106 # By default, driver_ndis uses WinPcap for low-level operations. This can be
107 # replaced with the following option which replaces WinPcap calls with NDISUIO.
108 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
110 # CONFIG_USE_NDISUIO=y
112 # Driver interface for development testing
113 #CONFIG_DRIVER_TEST=y
115 # Driver interface for wired Ethernet drivers
116 #CONFIG_DRIVER_WIRED=y
118 # Driver interface for the Broadcom RoboSwitch family
119 #CONFIG_DRIVER_ROBOSWITCH=y
121 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
123 CONFIG_IEEE8021X_EAPOL=y
129 CONFIG_EAP_MSCHAPV2=y
141 # Note: Default OpenSSL package does not include support for all the
142 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
143 # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
144 # to add the needed functions.
153 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
156 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
165 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
168 # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
169 # This requires CONFIG_EAP_AKA to be enabled, too.
170 #CONFIG_EAP_AKA_PRIME=y
172 # Enable USIM simulator (Milenage) for EAP-AKA
173 #CONFIG_USIM_SIMULATOR=y
180 # Include support for optional SHA256 cipher suite in EAP-GPSK
181 #CONFIG_EAP_GPSK_SHA256=y
183 # EAP-TNC and related Trusted Network Connect support (experimental)
186 # Wi-Fi Protected Setup (WPS)
192 # PKCS#12 (PFX) support (used to read private key and certificate file from
193 # a file that usually has extension .p12 or .pfx)
196 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
200 # PC/SC interface for smartcards (USIM, GSM SIM)
201 # Enable this if EAP-SIM or EAP-AKA is included
204 # Development testing
207 # Select control interface backend for external programs, e.g, wpa_cli:
208 # unix = UNIX domain sockets (default for Linux/*BSD)
209 # udp = UDP sockets using localhost (127.0.0.1)
210 # named_pipe = Windows Named Pipe (default for Windows)
211 # y = use default (backwards compatibility)
212 # If this option is commented out, control interface is not included in the
216 # Include support for GNU Readline and History Libraries in wpa_cli.
217 # When building a wpa_cli binary for distribution, please note that these
218 # libraries are licensed under GPL and as such, BSD license may not apply for
219 # the resulting binary.
222 # Remove debugging code that is printing out debug message to stdout.
223 # This can be used to reduce the size of the wpa_supplicant considerably
224 # if debugging code is not needed. The size reduction can be around 35%
226 #CONFIG_NO_STDOUT_DEBUG=y
228 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
229 # 35-50 kB in code size.
232 # Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
233 # save about 1 kB in code size when building only WPA-Personal (no EAP support)
234 # or 6 kB if building for WPA-Enterprise.
237 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
238 # This option can be used to reduce code size by removing support for
239 # converting ASCII passphrases into PSK. If this functionality is removed, the
240 # PSK can only be configured as the 64-octet hexstring (e.g., from
241 # wpa_passphrase). This saves about 0.5 kB in code size.
242 #CONFIG_NO_WPA_PASSPHRASE=y
244 # Remove AES extra functions. This can be used to reduce code size by about
245 # 1.5 kB by removing extra AES modes that are not needed for commonly used
246 # client configurations (they are needed for some EAP types).
247 #CONFIG_NO_AES_EXTRAS=y
249 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
250 # This can be used if ap_scan=1 mode is never enabled.
251 #CONFIG_NO_SCAN_PROCESSING=y
253 # Select configuration backend:
254 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
255 # path is given on command line, not here; this option is just used to
256 # select the backend that allows configuration files to be used)
257 # winreg = Windows registry (see win_example.reg for an example)
260 # Remove configuration write functionality (i.e., to allow the configuration
261 # file to be updated based on runtime configuration changes). The runtime
262 # configuration can still be changed, the changes are just not going to be
263 # persistent over restarts. This option can be used to reduce code size by
265 #CONFIG_NO_CONFIG_WRITE=y
267 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
268 #CONFIG_NO_CONFIG_BLOBS=y
270 # Select program entry point implementation:
271 # main = UNIX/POSIX like main() function (default)
272 # main_winsvc = Windows service (read parameters from registry)
273 # main_none = Very basic example (development use only)
276 # Select wrapper for operatins system and C library specific functions
277 # unix = UNIX/POSIX like systems (default)
278 # win32 = Windows systems
279 # none = Empty template
282 # Select event loop implementation
283 # eloop = select() loop (default)
284 # eloop_win = Windows events and WaitForMultipleObject() loop
285 # eloop_none = Empty template
288 # Select layer 2 packet implementation
289 # linux = Linux packet socket (default)
290 # pcap = libpcap/libdnet/WinPcap
291 # freebsd = FreeBSD libpcap
292 # winpcap = WinPcap with receive thread
293 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
294 # none = Empty template
295 CONFIG_L2_PACKET=linux
297 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
300 # IEEE 802.11w (management frame protection)
301 # This version is an experimental implementation based on IEEE 802.11w/D1.0
302 # draft and is subject to change since the standard has not yet been finalized.
303 # Driver support is also needed for IEEE 802.11w.
306 # Select TLS implementation
307 # openssl = OpenSSL (default)
308 # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
309 # internal = Internal TLSv1 implementation (experimental)
310 # none = Empty template
313 # Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
314 # You need CONFIG_TLS=gnutls for this to have any effect. Please note that
315 # even though the core GnuTLS library is released under LGPL, this extra
316 # library uses GPL and as such, the terms of GPL apply to the combination
317 # of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
318 # apply for distribution of the resulting binary.
319 #CONFIG_GNUTLS_EXTRA=y
321 # If CONFIG_TLS=internal is used, additional library and include paths are
322 # needed for LibTomMath. Alternatively, an integrated, minimal version of
323 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
324 # and drawbacks of this option.
325 #CONFIG_INTERNAL_LIBTOMMATH=y
326 #ifndef CONFIG_INTERNAL_LIBTOMMATH
327 #LTM_PATH=/usr/src/libtommath-0.39
328 #CFLAGS += -I$(LTM_PATH)
329 #LIBS += -L$(LTM_PATH)
330 #LIBS_p += -L$(LTM_PATH)
332 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
333 # can be configured to include faster routines for exptmod, sqr, and div to
334 # speed up DH and RSA calculation considerably
335 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y
337 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
338 # This is only for Windows builds and requires WMI-related header files and
339 # WbemUuid.Lib from Platform SDK even when building with MinGW.
340 #CONFIG_NDIS_EVENTS_INTEGRATED=y
341 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
343 # Add support for old DBus control interface
344 # (fi.epitest.hostap.WPASupplicant)
345 #CONFIG_CTRL_IFACE_DBUS=y
347 # Add support for new DBus control interface
348 # (fi.w1.hostap.wpa_supplicant1)
349 CONFIG_CTRL_IFACE_DBUS_NEW=y
351 # Add introspection support for new DBus control interface
352 CONFIG_CTRL_IFACE_DBUS_INTRO=y
354 # Add support for loading EAP methods dynamically as shared libraries.
355 # When this option is enabled, each EAP method can be either included
356 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
357 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
358 # be loaded in the beginning of the wpa_supplicant configuration file
359 # (see load_dynamic_eap parameter in the example file) before being used in
360 # the network blocks.
362 # Note that some shared parts of EAP methods are included in the main program
363 # and in order to be able to use dynamic EAP methods using these parts, the
364 # main program must have been build with the EAP method enabled (=y or =dyn).
365 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
366 # unless at least one of them was included in the main build to force inclusion
367 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
368 # in the main build to be able to load these methods dynamically.
370 # Please also note that using dynamic libraries will increase the total binary
371 # size. Thus, it may not be the best option for targets that have limited
372 # amount of memory/flash.
373 #CONFIG_DYNAMIC_EAP_METHODS=y
375 # Include client MLME (management frame processing).
376 # This can be used to move MLME processing of Linux mac80211 stack into user
377 # space. Please note that this is currently only available with
378 # driver_nl80211.c and only with a modified version of Linux kernel and
380 #CONFIG_CLIENT_MLME=y
382 # IEEE Std 802.11r-2008 (Fast BSS Transition)
385 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
388 # Enable privilege separation (see README 'Privilege separation' for details)
391 # Enable mitigation against certain attacks against TKIP by delaying Michael
392 # MIC error reports by a random amount of time between 0 and 60 seconds
393 CONFIG_DELAYED_MIC_ERROR_REPORT=y