[PATCH] Add support for the AMCC Katmai (440SPe) eval board
[platform/kernel/u-boot.git] / cpu / ppc4xx / speed.c
1 /*
2  * (C) Copyright 2000
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 #include <common.h>
25 #include <ppc_asm.tmpl>
26 #include <ppc4xx.h>
27 #include <asm/processor.h>
28
29 DECLARE_GLOBAL_DATA_PTR;
30
31 #define ONE_BILLION        1000000000
32 #ifdef DEBUG
33 #define DEBUGF(fmt,args...) printf(fmt ,##args)
34 #else
35 #define DEBUGF(fmt,args...)
36 #endif
37
38 #if defined(CONFIG_405GP) || defined(CONFIG_405CR)
39
40 void get_sys_info (PPC405_SYS_INFO * sysInfo)
41 {
42         unsigned long pllmr;
43         unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
44         uint pvr = get_pvr();
45         unsigned long psr;
46         unsigned long m;
47
48         /*
49          * Read PLL Mode register
50          */
51         pllmr = mfdcr (pllmd);
52
53         /*
54          * Read Pin Strapping register
55          */
56         psr = mfdcr (strap);
57
58         /*
59          * Determine FWD_DIV.
60          */
61         sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
62
63         /*
64          * Determine FBK_DIV.
65          */
66         sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
67         if (sysInfo->pllFbkDiv == 0) {
68                 sysInfo->pllFbkDiv = 16;
69         }
70
71         /*
72          * Determine PLB_DIV.
73          */
74         sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
75
76         /*
77          * Determine PCI_DIV.
78          */
79         sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
80
81         /*
82          * Determine EXTBUS_DIV.
83          */
84         sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
85
86         /*
87          * Determine OPB_DIV.
88          */
89         sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
90
91         /*
92          * Check if PPC405GPr used (mask minor revision field)
93          */
94         if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
95                 /*
96                  * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
97                  */
98                 sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
99
100                 /*
101                  * Determine factor m depending on PLL feedback clock source
102                  */
103                 if (!(psr & PSR_PCI_ASYNC_EN)) {
104                         if (psr & PSR_NEW_MODE_EN) {
105                                 /*
106                                  * sync pci clock used as feedback (new mode)
107                                  */
108                                 m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
109                         } else {
110                                 /*
111                                  * sync pci clock used as feedback (legacy mode)
112                                  */
113                                 m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
114                         }
115                 } else if (psr & PSR_NEW_MODE_EN) {
116                         if (psr & PSR_PERCLK_SYNC_MODE_EN) {
117                                 /*
118                                  * PerClk used as feedback (new mode)
119                                  */
120                                 m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
121                         } else {
122                                 /*
123                                  * CPU clock used as feedback (new mode)
124                                  */
125                                 m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
126                         }
127                 } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
128                         /*
129                          * PerClk used as feedback (legacy mode)
130                          */
131                         m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
132                 } else {
133                         /*
134                          * PLB clock used as feedback (legacy mode)
135                          */
136                         m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
137                 }
138
139                 sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
140                         (unsigned long long)sysClkPeriodPs;
141                 sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
142                 sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
143         } else {
144                 /*
145                  * Check pllFwdDiv to see if running in bypass mode where the CPU speed
146                  * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
147                  * to make sure it is within the proper range.
148                  *    spec:    VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
149                  * Note freqVCO is calculated in Mhz to avoid errors introduced by rounding.
150                  */
151                 if (sysInfo->pllFwdDiv == 1) {
152                         sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
153                         sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
154                 } else {
155                         sysInfo->freqVCOHz = ( 1000000000000LL *
156                                                (unsigned long long)sysInfo->pllFwdDiv *
157                                                (unsigned long long)sysInfo->pllFbkDiv *
158                                                (unsigned long long)sysInfo->pllPlbDiv
159                                 ) / (unsigned long long)sysClkPeriodPs;
160                         sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
161                                                            sysInfo->pllFbkDiv)) * 10000;
162                         sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
163                 }
164         }
165 }
166
167
168 /********************************************
169  * get_OPB_freq
170  * return OPB bus freq in Hz
171  *********************************************/
172 ulong get_OPB_freq (void)
173 {
174         ulong val = 0;
175
176         PPC405_SYS_INFO sys_info;
177
178         get_sys_info (&sys_info);
179         val = sys_info.freqPLB / sys_info.pllOpbDiv;
180
181         return val;
182 }
183
184
185 /********************************************
186  * get_PCI_freq
187  * return PCI bus freq in Hz
188  *********************************************/
189 ulong get_PCI_freq (void)
190 {
191         ulong val;
192         PPC405_SYS_INFO sys_info;
193
194         get_sys_info (&sys_info);
195         val = sys_info.freqPLB / sys_info.pllPciDiv;
196         return val;
197 }
198
199
200 #elif defined(CONFIG_440)
201
202 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
203     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
204 void get_sys_info (sys_info_t *sysInfo)
205 {
206         unsigned long temp;
207         unsigned long reg;
208         unsigned long lfdiv;
209         unsigned long m;
210         unsigned long prbdv0;
211         /*
212           WARNING: ASSUMES the following:
213           ENG=1
214           PRADV0=1
215           PRBDV0=1
216         */
217
218         /* Decode CPR0_PLLD0 for divisors */
219         mfclk(clk_plld, reg);
220         temp = (reg & PLLD_FWDVA_MASK) >> 16;
221         sysInfo->pllFwdDivA = temp ? temp : 16;
222         temp = (reg & PLLD_FWDVB_MASK) >> 8;
223         sysInfo->pllFwdDivB = temp ? temp: 8 ;
224         temp = (reg & PLLD_FBDV_MASK) >> 24;
225         sysInfo->pllFbkDiv = temp ? temp : 32;
226         lfdiv = reg & PLLD_LFBDV_MASK;
227
228         mfclk(clk_opbd, reg);
229         temp = (reg & OPBDDV_MASK) >> 24;
230         sysInfo->pllOpbDiv = temp ? temp : 4;
231
232         mfclk(clk_perd, reg);
233         temp = (reg & PERDV_MASK) >> 24;
234         sysInfo->pllExtBusDiv = temp ? temp : 8;
235
236         mfclk(clk_primbd, reg);
237         temp = (reg & PRBDV_MASK) >> 24;
238         prbdv0 = temp ? temp : 8;
239
240         mfclk(clk_spcid, reg);
241         temp = (reg & SPCID_MASK) >> 24;
242         sysInfo->pllPciDiv = temp ? temp : 4;
243
244         /* Calculate 'M' based on feedback source */
245         mfsdr(sdr_sdstp0, reg);
246         temp = (reg & PLLSYS0_SEL_MASK) >> 27;
247         if (temp == 0) { /* PLL output */
248                 /* Figure which pll to use */
249                 mfclk(clk_pllc, reg);
250                 temp = (reg & PLLC_SRC_MASK) >> 29;
251                 if (!temp) /* PLLOUTA */
252                         m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
253                 else       /* PLLOUTB */
254                         m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
255         }
256         else if (temp == 1) /* CPU output */
257                 m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
258         else /* PerClk */
259                 m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
260
261         /* Now calculate the individual clocks */
262         sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
263         sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
264         sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
265         sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
266         sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
267         sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
268
269         /* Figure which timer source to use */
270         if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
271                 temp = sysInfo->freqProcessor / 2;  /* Max extern clock speed */
272                 if (CONFIG_SYS_CLK_FREQ > temp)
273                         sysInfo->freqTmrClk = temp;
274                 else
275                         sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
276         }
277         else  /* Internal clock */
278                 sysInfo->freqTmrClk = sysInfo->freqProcessor;
279 }
280 /********************************************
281  * get_PCI_freq
282  * return PCI bus freq in Hz
283  *********************************************/
284 ulong get_PCI_freq (void)
285 {
286         sys_info_t sys_info;
287         get_sys_info (&sys_info);
288         return sys_info.freqPCI;
289 }
290
291 #elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
292 void get_sys_info (sys_info_t * sysInfo)
293 {
294         unsigned long strp0;
295         unsigned long temp;
296         unsigned long m;
297
298         /* Extract configured divisors */
299         strp0 = mfdcr( cpc0_strp0 );
300         sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
301         sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
302         temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
303         sysInfo->pllFbkDiv = temp ? temp : 16;
304         sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
305         sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
306
307         /* Calculate 'M' based on feedback source */
308         if( strp0 & PLLSYS0_EXTSL_MASK )
309                 m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
310         else
311                 m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
312
313         /* Now calculate the individual clocks */
314         sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
315         sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
316         sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
317         if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
318                 sysInfo->freqPLB >>= 1;
319         sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
320         sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
321
322 }
323 #else
324 void get_sys_info (sys_info_t * sysInfo)
325 {
326         unsigned long strp0;
327         unsigned long strp1;
328         unsigned long temp;
329         unsigned long temp1;
330         unsigned long lfdiv;
331         unsigned long m;
332         unsigned long prbdv0;
333
334 #if defined(CONFIG_YUCCA)
335         unsigned long sys_freq;
336         unsigned long sys_per=0;
337         unsigned long msr;
338         unsigned long pci_clock_per;
339         unsigned long sdr_ddrpll;
340
341         /*-------------------------------------------------------------------------+
342          | Get the system clock period.
343          +-------------------------------------------------------------------------*/
344         sys_per = determine_sysper();
345
346         msr = (mfmsr () & ~(MSR_EE));   /* disable interrupts */
347
348         /*-------------------------------------------------------------------------+
349          | Calculate the system clock speed from the period.
350          +-------------------------------------------------------------------------*/
351         sys_freq = (ONE_BILLION / sys_per) * 1000;
352 #endif
353
354         /* Extract configured divisors */
355         mfsdr( sdr_sdstp0,strp0 );
356         mfsdr( sdr_sdstp1,strp1 );
357
358         temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
359         sysInfo->pllFwdDivA = temp ? temp : 16 ;
360         temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
361         sysInfo->pllFwdDivB = temp ? temp: 8 ;
362         temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
363         sysInfo->pllFbkDiv = temp ? temp : 32;
364         temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
365         sysInfo->pllOpbDiv = temp ? temp : 4;
366         temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
367         sysInfo->pllExtBusDiv = temp ? temp : 4;
368         prbdv0 = (strp0 >> 2) & 0x7;
369
370         /* Calculate 'M' based on feedback source */
371         temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
372         temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
373         lfdiv = temp1 ? temp1 : 64;
374         if (temp == 0) { /* PLL output */
375                 /* Figure which pll to use */
376                 temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
377                 if (!temp)
378                         m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
379                 else
380                         m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
381         }
382         else if (temp == 1) /* CPU output */
383                 m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
384         else /* PerClk */
385                 m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
386
387         /* Now calculate the individual clocks */
388 #if defined(CONFIG_YUCCA)
389         sysInfo->freqVCOMhz = (m * sys_freq) ;
390 #else
391         sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
392 #endif
393         sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
394         sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
395         sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
396         sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
397
398 #if defined(CONFIG_YUCCA)
399         /* Determine PCI Clock Period */
400         pci_clock_per = determine_pci_clock_per();
401         sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
402         mfsdr(sdr_ddr0, sdr_ddrpll);
403         sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
404 #endif
405
406
407 }
408
409 #endif
410
411 #if defined(CONFIG_YUCCA)
412 unsigned long determine_sysper(void)
413 {
414         unsigned int fpga_clocking_reg;
415         unsigned int master_clock_selection;
416         unsigned long master_clock_per = 0;
417         unsigned long fb_div_selection;
418         unsigned int vco_div_reg_value;
419         unsigned long vco_div_selection;
420         unsigned long sys_per = 0;
421         int extClkVal;
422
423         /*-------------------------------------------------------------------------+
424          | Read FPGA reg 0 and reg 1 to get FPGA reg information
425          +-------------------------------------------------------------------------*/
426         fpga_clocking_reg = in16(FPGA_REG16);
427
428
429         /* Determine Master Clock Source Selection */
430         master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
431
432         switch(master_clock_selection) {
433                 case FPGA_REG16_MASTER_CLK_66_66:
434                         master_clock_per = PERIOD_66_66MHZ;
435                         break;
436                 case FPGA_REG16_MASTER_CLK_50:
437                         master_clock_per = PERIOD_50_00MHZ;
438                         break;
439                 case FPGA_REG16_MASTER_CLK_33_33:
440                         master_clock_per = PERIOD_33_33MHZ;
441                         break;
442                 case FPGA_REG16_MASTER_CLK_25:
443                         master_clock_per = PERIOD_25_00MHZ;
444                         break;
445                 case FPGA_REG16_MASTER_CLK_EXT:
446                         if ((extClkVal==EXTCLK_33_33)
447                                         && (extClkVal==EXTCLK_50)
448                                         && (extClkVal==EXTCLK_66_66)
449                                         && (extClkVal==EXTCLK_83)) {
450                                 /* calculate master clock period from external clock value */
451                                 master_clock_per=(ONE_BILLION/extClkVal) * 1000;
452                         } else {
453                                 /* Unsupported */
454                                 DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
455                                 hang();
456                         }
457                         break;
458                 default:
459                         /* Unsupported */
460                         DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
461                         hang();
462                         break;
463         }
464
465         /* Determine FB divisors values */
466         if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
467                 if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
468                         fb_div_selection = FPGA_FB_DIV_6;
469                 else
470                         fb_div_selection = FPGA_FB_DIV_12;
471         } else {
472                 if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
473                         fb_div_selection = FPGA_FB_DIV_10;
474                 else
475                         fb_div_selection = FPGA_FB_DIV_20;
476         }
477
478         /* Determine VCO divisors values */
479         vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
480
481         switch(vco_div_reg_value) {
482                 case FPGA_REG16_VCO_DIV_4:
483                         vco_div_selection = FPGA_VCO_DIV_4;
484                         break;
485                 case FPGA_REG16_VCO_DIV_6:
486                         vco_div_selection = FPGA_VCO_DIV_6;
487                         break;
488                 case FPGA_REG16_VCO_DIV_8:
489                         vco_div_selection = FPGA_VCO_DIV_8;
490                         break;
491                 case FPGA_REG16_VCO_DIV_10:
492                 default:
493                         vco_div_selection = FPGA_VCO_DIV_10;
494                         break;
495         }
496
497         if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
498                 switch(master_clock_per) {
499                         case PERIOD_25_00MHZ:
500                                 if (fb_div_selection == FPGA_FB_DIV_12) {
501                                         if (vco_div_selection == FPGA_VCO_DIV_4)
502                                                 sys_per = PERIOD_75_00MHZ;
503                                         if (vco_div_selection == FPGA_VCO_DIV_6)
504                                                 sys_per = PERIOD_50_00MHZ;
505                                 }
506                                 break;
507                         case PERIOD_33_33MHZ:
508                                 if (fb_div_selection == FPGA_FB_DIV_6) {
509                                         if (vco_div_selection == FPGA_VCO_DIV_4)
510                                                 sys_per = PERIOD_50_00MHZ;
511                                         if (vco_div_selection == FPGA_VCO_DIV_6)
512                                                 sys_per = PERIOD_33_33MHZ;
513                                 }
514                                 if (fb_div_selection == FPGA_FB_DIV_10) {
515                                         if (vco_div_selection == FPGA_VCO_DIV_4)
516                                                 sys_per = PERIOD_83_33MHZ;
517                                         if (vco_div_selection == FPGA_VCO_DIV_10)
518                                                 sys_per = PERIOD_33_33MHZ;
519                                 }
520                                 if (fb_div_selection == FPGA_FB_DIV_12) {
521                                         if (vco_div_selection == FPGA_VCO_DIV_4)
522                                                 sys_per = PERIOD_100_00MHZ;
523                                         if (vco_div_selection == FPGA_VCO_DIV_6)
524                                                 sys_per = PERIOD_66_66MHZ;
525                                         if (vco_div_selection == FPGA_VCO_DIV_8)
526                                                 sys_per = PERIOD_50_00MHZ;
527                                 }
528                                 break;
529                         case PERIOD_50_00MHZ:
530                                 if (fb_div_selection == FPGA_FB_DIV_6) {
531                                         if (vco_div_selection == FPGA_VCO_DIV_4)
532                                                 sys_per = PERIOD_75_00MHZ;
533                                         if (vco_div_selection == FPGA_VCO_DIV_6)
534                                                 sys_per = PERIOD_50_00MHZ;
535                                 }
536                                 if (fb_div_selection == FPGA_FB_DIV_10) {
537                                         if (vco_div_selection == FPGA_VCO_DIV_6)
538                                                 sys_per = PERIOD_83_33MHZ;
539                                         if (vco_div_selection == FPGA_VCO_DIV_10)
540                                                 sys_per = PERIOD_50_00MHZ;
541                                 }
542                                 if (fb_div_selection == FPGA_FB_DIV_12) {
543                                         if (vco_div_selection == FPGA_VCO_DIV_6)
544                                                 sys_per = PERIOD_100_00MHZ;
545                                         if (vco_div_selection == FPGA_VCO_DIV_8)
546                                                 sys_per = PERIOD_75_00MHZ;
547                                 }
548                                 break;
549                         case PERIOD_66_66MHZ:
550                                 if (fb_div_selection == FPGA_FB_DIV_6) {
551                                         if (vco_div_selection == FPGA_VCO_DIV_4)
552                                                 sys_per = PERIOD_100_00MHZ;
553                                         if (vco_div_selection == FPGA_VCO_DIV_6)
554                                                 sys_per = PERIOD_66_66MHZ;
555                                         if (vco_div_selection == FPGA_VCO_DIV_8)
556                                                 sys_per = PERIOD_50_00MHZ;
557                                 }
558                                 if (fb_div_selection == FPGA_FB_DIV_10) {
559                                         if (vco_div_selection == FPGA_VCO_DIV_8)
560                                                 sys_per = PERIOD_83_33MHZ;
561                                         if (vco_div_selection == FPGA_VCO_DIV_10)
562                                                 sys_per = PERIOD_66_66MHZ;
563                                 }
564                                 if (fb_div_selection == FPGA_FB_DIV_12) {
565                                         if (vco_div_selection == FPGA_VCO_DIV_8)
566                                                 sys_per = PERIOD_100_00MHZ;
567                                 }
568                                 break;
569                         default:
570                                 break;
571                 }
572
573                 if (sys_per == 0) {
574                         /* Other combinations are not supported */
575                         DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
576                         hang();
577                 }
578         } else {
579                 /* calcul system clock without cheking */
580                 /* if engineering option clock no check is selected */
581                 /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
582                 sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
583         }
584
585         return(sys_per);
586 }
587
588 /*-------------------------------------------------------------------------+
589 | determine_pci_clock_per.
590 +-------------------------------------------------------------------------*/
591 unsigned long determine_pci_clock_per(void)
592 {
593         unsigned long pci_clock_selection,  pci_period;
594
595         /*-------------------------------------------------------------------------+
596          | Read FPGA reg 6 to get PCI 0 FPGA reg information
597          +-------------------------------------------------------------------------*/
598         pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
599
600
601         pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
602
603         switch (pci_clock_selection) {
604                 case FPGA_REG16_PCI0_CLK_133_33:
605                         pci_period = PERIOD_133_33MHZ;
606                         break;
607                 case FPGA_REG16_PCI0_CLK_100:
608                         pci_period = PERIOD_100_00MHZ;
609                         break;
610                 case FPGA_REG16_PCI0_CLK_66_66:
611                         pci_period = PERIOD_66_66MHZ;
612                         break;
613                 default:
614                         pci_period = PERIOD_33_33MHZ;;
615                         break;
616         }
617
618         return(pci_period);
619 }
620 #endif
621
622 ulong get_OPB_freq (void)
623 {
624
625         sys_info_t sys_info;
626         get_sys_info (&sys_info);
627         return sys_info.freqOPB;
628 }
629
630 #elif defined(CONFIG_XILINX_ML300)
631 extern void get_sys_info (sys_info_t * sysInfo);
632 extern ulong get_PCI_freq (void);
633
634 #elif defined(CONFIG_AP1000)
635 void get_sys_info (sys_info_t * sysInfo) {
636         sysInfo->freqProcessor = 240 * 1000 * 1000;
637         sysInfo->freqPLB = 80 * 1000 * 1000;
638         sysInfo->freqPCI = 33 * 1000 * 1000;
639 }
640
641 #elif defined(CONFIG_405)
642
643 void get_sys_info (sys_info_t * sysInfo) {
644
645         sysInfo->freqVCOMhz=3125000;
646         sysInfo->freqProcessor=12*1000*1000;
647         sysInfo->freqPLB=50*1000*1000;
648         sysInfo->freqPCI=66*1000*1000;
649
650 }
651
652 #elif defined(CONFIG_405EP)
653 void get_sys_info (PPC405_SYS_INFO * sysInfo)
654 {
655         unsigned long pllmr0;
656         unsigned long pllmr1;
657         unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
658         unsigned long m;
659         unsigned long pllmr0_ccdv;
660
661         /*
662          * Read PLL Mode registers
663          */
664         pllmr0 = mfdcr (cpc0_pllmr0);
665         pllmr1 = mfdcr (cpc0_pllmr1);
666
667         /*
668          * Determine forward divider A
669          */
670         sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
671
672         /*
673          * Determine forward divider B (should be equal to A)
674          */
675         sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
676
677         /*
678          * Determine FBK_DIV.
679          */
680         sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
681         if (sysInfo->pllFbkDiv == 0) {
682                 sysInfo->pllFbkDiv = 16;
683         }
684
685         /*
686          * Determine PLB_DIV.
687          */
688         sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
689
690         /*
691          * Determine PCI_DIV.
692          */
693         sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
694
695         /*
696          * Determine EXTBUS_DIV.
697          */
698         sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
699
700         /*
701          * Determine OPB_DIV.
702          */
703         sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
704
705         /*
706          * Determine the M factor
707          */
708         m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
709
710         /*
711          * Determine VCO clock frequency
712          */
713         sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
714                 (unsigned long long)sysClkPeriodPs;
715
716         /*
717          * Determine CPU clock frequency
718          */
719         pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
720         if (pllmr1 & PLLMR1_SSCS_MASK) {
721                 /*
722                  * This is true if FWDVA == FWDVB:
723                  * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
724                  *      / pllmr0_ccdv;
725                  */
726                 sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
727                         / sysInfo->pllFwdDiv / pllmr0_ccdv;
728         } else {
729                 sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
730         }
731
732         /*
733          * Determine PLB clock frequency
734          */
735         sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
736 }
737
738
739 /********************************************
740  * get_OPB_freq
741  * return OPB bus freq in Hz
742  *********************************************/
743 ulong get_OPB_freq (void)
744 {
745         ulong val = 0;
746
747         PPC405_SYS_INFO sys_info;
748
749         get_sys_info (&sys_info);
750         val = sys_info.freqPLB / sys_info.pllOpbDiv;
751
752         return val;
753 }
754
755
756 /********************************************
757  * get_PCI_freq
758  * return PCI bus freq in Hz
759  *********************************************/
760 ulong get_PCI_freq (void)
761 {
762         ulong val;
763         PPC405_SYS_INFO sys_info;
764
765         get_sys_info (&sys_info);
766         val = sys_info.freqPLB / sys_info.pllPciDiv;
767         return val;
768 }
769
770 #endif
771
772 int get_clocks (void)
773 {
774 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
775         sys_info_t sys_info;
776
777         get_sys_info (&sys_info);
778         gd->cpu_clk = sys_info.freqProcessor;
779         gd->bus_clk = sys_info.freqPLB;
780
781 #endif  /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
782
783 #ifdef CONFIG_IOP480
784         gd->cpu_clk = 66000000;
785         gd->bus_clk = 66000000;
786 #endif
787         return (0);
788 }
789
790
791 /********************************************
792  * get_bus_freq
793  * return PLB bus freq in Hz
794  *********************************************/
795 ulong get_bus_freq (ulong dummy)
796 {
797         ulong val;
798
799 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440) || defined(CONFIG_405EP)
800         sys_info_t sys_info;
801
802         get_sys_info (&sys_info);
803         val = sys_info.freqPLB;
804
805 #elif defined(CONFIG_IOP480)
806
807         val = 66;
808
809 #else
810 # error get_bus_freq() not implemented
811 #endif
812
813         return val;
814 }