ecea5b0643896211960c4821ab9e11acae94f5c5
[kernel/u-boot.git] / cpu / mpc86xx / cpu.c
1 /*
2  * Copyright 2006 Freescale Semiconductor
3  * Jeff Brown
4  * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
5  *
6  * See file CREDITS for list of people who contributed to this
7  * project.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of
12  * the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  */
24
25 #include <common.h>
26 #include <watchdog.h>
27 #include <command.h>
28 #include <asm/cache.h>
29 #include <asm/mmu.h>
30 #include <mpc86xx.h>
31 #include <asm/fsl_law.h>
32
33
34 int
35 checkcpu(void)
36 {
37         sys_info_t sysinfo;
38         uint pvr, svr;
39         uint ver;
40         uint major, minor;
41         uint lcrr;              /* local bus clock ratio register */
42         uint clkdiv;            /* clock divider portion of lcrr */
43         volatile immap_t *immap = (immap_t *) CFG_IMMR;
44         volatile ccsr_gur_t *gur = &immap->im_gur;
45
46         puts("Freescale PowerPC\n");
47
48         pvr = get_pvr();
49         ver = PVR_VER(pvr);
50         major = PVR_MAJ(pvr);
51         minor = PVR_MIN(pvr);
52
53         puts("CPU:\n");
54         puts("    Core: ");
55
56         switch (ver) {
57         case PVR_VER(PVR_86xx):
58         {
59                 uint msscr0 = mfspr(MSSCR0);
60                 printf("E600 Core %d", (msscr0 & 0x20) ? 1 : 0 );
61                 if (gur->pordevsr & MPC86xx_PORDEVSR_CORE1TE)
62                         puts("\n    Core1Translation Enabled");
63                 debug(" (MSSCR0=%x, PORDEVSR=%x)", msscr0, gur->pordevsr);
64         }
65         break;
66         default:
67                 puts("Unknown");
68                 break;
69         }
70         printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
71
72         svr = get_svr();
73         ver = SVR_SOC_VER(svr);
74         major = SVR_MAJ(svr);
75         minor = SVR_MIN(svr);
76
77         puts("    System: ");
78         switch (ver) {
79         case SVR_8641:
80             if (SVR_SUBVER(svr) == 1) {
81                 puts("8641D");
82             } else {
83                 puts("8641");
84             }
85             break;
86         case SVR_8610:
87                 puts("8610");
88                 break;
89         default:
90                 puts("Unknown");
91                 break;
92         }
93         printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
94
95         get_sys_info(&sysinfo);
96
97         puts("    Clocks: ");
98         printf("CPU:%4lu MHz, ", sysinfo.freqProcessor / 1000000);
99         printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000);
100         printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
101
102 #if defined(CFG_LBC_LCRR)
103         lcrr = CFG_LBC_LCRR;
104 #else
105         {
106                 volatile immap_t *immap = (immap_t *) CFG_IMMR;
107                 volatile ccsr_lbc_t *lbc = &immap->im_lbc;
108
109                 lcrr = lbc->lcrr;
110         }
111 #endif
112         clkdiv = lcrr & 0x0f;
113         if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
114                 printf("LBC:%4lu MHz\n",
115                        sysinfo.freqSystemBus / 1000000 / clkdiv);
116         } else {
117                 printf("    LBC: unknown (lcrr: 0x%08x)\n", lcrr);
118         }
119
120         puts("    L2: ");
121         if (get_l2cr() & 0x80000000)
122                 puts("Enabled\n");
123         else
124                 puts("Disabled\n");
125
126         return 0;
127 }
128
129
130 static inline void
131 soft_restart(unsigned long addr)
132 {
133 #if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD)
134
135         /*
136          * SRR0 has system reset vector, SRR1 has default MSR value
137          * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
138          */
139
140         __asm__ __volatile__ ("mtspr    26, %0"         :: "r" (addr));
141         __asm__ __volatile__ ("li       4, (1 << 6)"    ::: "r4");
142         __asm__ __volatile__ ("mtspr    27, 4");
143         __asm__ __volatile__ ("rfi");
144
145 #else /* CONFIG_MPC8641HPCN */
146
147         out8(PIXIS_BASE + PIXIS_RST, 0);
148
149 #endif /* !CONFIG_MPC8641HPCN */
150
151         while (1) ;             /* not reached */
152 }
153
154
155 /*
156  * No generic way to do board reset. Simply call soft_reset.
157  */
158 void
159 do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
160 {
161 #if !defined(CONFIG_MPC8641HPCN) && !defined(CONFIG_MPC8610HPCD)
162
163 #ifdef CFG_RESET_ADDRESS
164         ulong addr = CFG_RESET_ADDRESS;
165 #else
166         /*
167          * note: when CFG_MONITOR_BASE points to a RAM address,
168          * CFG_MONITOR_BASE - sizeof (ulong) is usually a valid
169          * address. Better pick an address known to be invalid on your
170          * system and assign it to CFG_RESET_ADDRESS.
171          */
172         ulong addr = CFG_MONITOR_BASE - sizeof(ulong);
173 #endif
174
175         /* flush and disable I/D cache */
176         __asm__ __volatile__ ("mfspr    3, 1008"        ::: "r3");
177         __asm__ __volatile__ ("ori      5, 5, 0xcc00"   ::: "r5");
178         __asm__ __volatile__ ("ori      4, 3, 0xc00"    ::: "r4");
179         __asm__ __volatile__ ("andc     5, 3, 5"        ::: "r5");
180         __asm__ __volatile__ ("sync");
181         __asm__ __volatile__ ("mtspr    1008, 4");
182         __asm__ __volatile__ ("isync");
183         __asm__ __volatile__ ("sync");
184         __asm__ __volatile__ ("mtspr    1008, 5");
185         __asm__ __volatile__ ("isync");
186         __asm__ __volatile__ ("sync");
187
188         soft_restart(addr);
189
190 #else /* CONFIG_MPC8641HPCN */
191
192         out8(PIXIS_BASE + PIXIS_RST, 0);
193
194 #endif /* !CONFIG_MPC8641HPCN */
195
196         while (1) ;             /* not reached */
197 }
198
199
200 /*
201  * Get timebase clock frequency
202  */
203 unsigned long
204 get_tbclk(void)
205 {
206         sys_info_t sys_info;
207
208         get_sys_info(&sys_info);
209         return (sys_info.freqSystemBus + 3L) / 4L;
210 }
211
212
213 #if defined(CONFIG_WATCHDOG)
214 void
215 watchdog_reset(void)
216 {
217 #if defined(CONFIG_MPC8610)
218         /*
219          * This actually feed the hard enabled watchdog.
220          */
221         volatile immap_t *immap = (immap_t *)CFG_IMMR;
222         volatile ccsr_wdt_t *wdt = &immap->im_wdt;
223         volatile ccsr_gur_t *gur = &immap->im_gur;
224         u32 tmp = gur->pordevsr;
225
226         if (tmp & 0x4000) {
227                 wdt->swsrr = 0x556c;
228                 wdt->swsrr = 0xaa39;
229         }
230 #endif
231 }
232 #endif  /* CONFIG_WATCHDOG */
233
234
235 #if defined(CONFIG_DDR_ECC)
236 void
237 dma_init(void)
238 {
239         volatile immap_t *immap = (immap_t *) CFG_IMMR;
240         volatile ccsr_dma_t *dma = &immap->im_dma;
241
242         dma->satr0 = 0x00040000;
243         dma->datr0 = 0x00040000;
244         asm("sync; isync");
245 }
246
247 uint
248 dma_check(void)
249 {
250         volatile immap_t *immap = (immap_t *) CFG_IMMR;
251         volatile ccsr_dma_t *dma = &immap->im_dma;
252         volatile uint status = dma->sr0;
253
254         /* While the channel is busy, spin */
255         while ((status & 4) == 4) {
256                 status = dma->sr0;
257         }
258
259         if (status != 0) {
260                 printf("DMA Error: status = %x\n", status);
261         }
262         return status;
263 }
264
265 int
266 dma_xfer(void *dest, uint count, void *src)
267 {
268         volatile immap_t *immap = (immap_t *) CFG_IMMR;
269         volatile ccsr_dma_t *dma = &immap->im_dma;
270
271         dma->dar0 = (uint) dest;
272         dma->sar0 = (uint) src;
273         dma->bcr0 = count;
274         dma->mr0 = 0xf000004;
275         asm("sync;isync");
276         dma->mr0 = 0xf000005;
277         asm("sync;isync");
278         return dma_check();
279 }
280
281 #endif  /* CONFIG_DDR_ECC */
282
283
284 /*
285  * Print out the state of various machine registers.
286  * Currently prints out LAWs, BR0/OR0, and BATs
287  */
288 void mpc86xx_reginfo(void)
289 {
290         immap_t *immap = (immap_t *)CFG_IMMR;
291         ccsr_lbc_t *lbc = &immap->im_lbc;
292
293         print_bats();
294         print_laws();
295
296         printf ("Local Bus Controller Registers\n"
297                 "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0));
298         printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1));
299         printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2));
300         printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3));
301         printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4));
302         printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5));
303         printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6));
304         printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
305
306 }
307
308 #ifdef CONFIG_TSEC_ENET
309 /* Default initializations for TSEC controllers.  To override,
310  * create a board-specific function called:
311  *      int board_eth_init(bd_t *bis)
312  */
313
314 extern int tsec_initialize(bd_t * bis, int index, char *devname);
315
316 int cpu_eth_init(bd_t *bis)
317 {
318 #if defined(CONFIG_TSEC1)
319         tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
320 #endif
321 #if defined(CONFIG_TSEC2)
322         tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
323 #endif
324 #if defined(CONFIG_TSEC3)
325         tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
326 #endif
327 #if defined(CONFIG_TSEC4)
328         tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
329 #endif
330         return 0;
331 }
332 #endif /* CONFIG_TSEC_ENET */