3 * Texas Instruments, <www.ti.com>
6 * Manikandan Pillai <mani.pillai@ti.com>
8 * Derived from Beagle Board and 3430 SDP code by
9 * Richard Woodruff <r-woodruff2@ti.com>
10 * Syed Mohammed Khasim <khasim@ti.com>
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
20 * GNU General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30 #include <asm/arch/mem.h> /* get mem tables */
31 #include <asm/arch/sys_proto.h>
34 extern omap3_sysinfo sysinfo;
35 static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE;
36 static struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
37 static char *rev_s[CPU_3XX_MAX_REV] = {
44 /*****************************************************************
45 * dieid_num_r(void) - read and set die ID
46 *****************************************************************/
47 void dieid_num_r(void)
49 struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
50 char *uid_s, die_id[34];
53 memset(die_id, 0, sizeof(die_id));
55 uid_s = getenv("dieid#");
58 id[3] = readl(&id_base->die_id_0);
59 id[2] = readl(&id_base->die_id_1);
60 id[1] = readl(&id_base->die_id_2);
61 id[0] = readl(&id_base->die_id_3);
62 sprintf(die_id, "%08x%08x%08x%08x", id[0], id[1], id[2], id[3]);
63 setenv("dieid#", die_id);
67 printf("Die ID #%s\n", uid_s);
70 /******************************************
71 * get_cpu_type(void) - extract cpu info
72 ******************************************/
73 u32 get_cpu_type(void)
75 return readl(&ctrl_base->ctrl_omap_stat);
78 /******************************************
79 * get_cpu_rev(void) - extract version info
80 ******************************************/
84 struct ctrl_id *id_base;
87 * On ES1.0 the IDCODE register is not exposed on L4
88 * so using CPU ID to differentiate between ES1.0 and > ES1.0.
90 __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(cpuid));
91 if ((cpuid & 0xf) == 0x0)
94 /* Decode the IDs on > ES1.0 */
95 id_base = (struct ctrl_id *) OMAP34XX_ID_L4_IO_BASE;
97 cpuid = (readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf;
99 /* Some early ES2.0 seem to report ID 0, fix this */
101 cpuid = CPU_3XX_ES20;
107 /****************************************************
108 * is_mem_sdr() - return 1 if mem type in use is SDR
109 ****************************************************/
112 if (readl(&sdrc_base->cs[CS0].mr) == SDP_SDRC_MR_0_SDR)
117 /***********************************************************************
118 * get_cs0_size() - get size of chip select 0/1
119 ************************************************************************/
120 u32 get_sdr_cs_size(u32 cs)
124 /* get ram size field */
125 size = readl(&sdrc_base->cs[cs].mcfg) >> 8;
126 size &= 0x3FF; /* remove unwanted bits */
127 size <<= 21; /* multiply by 2 MiB to find size in MB */
131 /***********************************************************************
132 * get_sdr_cs_offset() - get offset of cs from cs0 start
133 ************************************************************************/
134 u32 get_sdr_cs_offset(u32 cs)
141 offset = readl(&sdrc_base->cs_cfg);
142 offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
147 /***************************************************************************
148 * get_gpmc0_base() - Return current address hardware will be
149 * fetching from. The below effectively gives what is correct, its a bit
150 * mis-leading compared to the TRM. For the most general case the mask
151 * needs to be also taken into account this does work in practice.
152 * - for u-boot we currently map:
157 ****************************************************************************/
158 u32 get_gpmc0_base(void)
162 b = readl(&gpmc_cfg->cs[0].config7);
163 b &= 0x1F; /* keep base [5:0] */
164 b = b << 24; /* ret 0x0b000000 */
168 /*******************************************************************
169 * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
170 *******************************************************************/
171 u32 get_gpmc0_width(void)
176 /*************************************************************************
177 * get_board_rev() - setup to pass kernel board revision information
178 * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
179 *************************************************************************/
180 u32 get_board_rev(void)
185 /********************************************************
186 * get_base(); get upper addr of current execution
187 *******************************************************/
192 __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
198 /********************************************************
199 * is_running_in_flash() - tell if currently running in
201 *******************************************************/
202 u32 is_running_in_flash(void)
205 return 1; /* in FLASH */
207 return 0; /* running in SRAM or SDRAM */
210 /********************************************************
211 * is_running_in_sram() - tell if currently running in
213 *******************************************************/
214 u32 is_running_in_sram(void)
217 return 1; /* in SRAM */
219 return 0; /* running in FLASH or SDRAM */
222 /********************************************************
223 * is_running_in_sdram() - tell if currently running in
225 *******************************************************/
226 u32 is_running_in_sdram(void)
229 return 1; /* in SDRAM */
231 return 0; /* running in SRAM or FLASH */
234 /***************************************************************
235 * get_boot_type() - Is this an XIP type device or a stream one
236 * bits 4-0 specify type. Bit 5 says mem/perif
237 ***************************************************************/
238 u32 get_boot_type(void)
240 return (readl(&ctrl_base->status) & SYSBOOT_MASK);
243 /*************************************************************
244 * get_device_type(): tell if GP/HS/EMU/TST
245 *************************************************************/
246 u32 get_device_type(void)
248 return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8);
251 #ifdef CONFIG_DISPLAY_CPUINFO
253 * Print CPU information
255 int print_cpuinfo (void)
259 switch (get_cpu_type()) {
277 switch (get_device_type()) {
294 printf("OMAP%s-%s ES%s, CPU-OPP2 L3-165MHz\n",
295 cpu_s, sec_s, rev_s[get_cpu_rev()]);
299 #endif /* CONFIG_DISPLAY_CPUINFO */