core/adv.inc

   1 ;; -----------------------------------------------------------------------
   2 ;;
   3 ;;   Copyright 2007-2008 H. Peter Anvin - All Rights Reserved
   4 ;;
   5 ;;   This program is free software; you can redistribute it and/or modify
   6 ;;   it under the terms of the GNU General Public License as published by
   7 ;;   the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
   8 ;;   Boston MA 02110-1301, USA; either version 2 of the License, or
   9 ;;   (at your option) any later version; incorporated herein by reference.
  10 ;;
  11 ;; -----------------------------------------------------------------------
  12
  13 ;;
  14 ;; adv.inc
  15 ;;
  16 ;; The auxillary data vector and its routines
  17 ;;
  18 ;; The auxillary data vector is a 512-byte aligned block that on the
  19 ;; disk-based derivatives can be part of the syslinux file itself.  It
  20 ;; exists in two copies; when written, both copies are written (with a
  21 ;; sync in between, if from the operating system.)  The first two
  22 ;; dwords are magic number and inverse checksum, then follows the data
  23 ;; area as a tagged array similar to BOOTP/DHCP, finally a tail
  24 ;; signature.
  25 ;;
  26 ;; Note that unlike BOOTP/DHCP, zero terminates the chain, and FF
  27 ;; has no special meaning.
  28 ;;
  29
  30 ;;
  31 ;; List of ADV tags...
  32 ;;
  33 ADV_BOOTONCE    equ 1
  34
  35 ;;
  36 ;; Other ADV data...
  37 ;;
  38 ADV_MAGIC1      equ 0x5a2d2fa5                  ; Head signature
  39 ADV_MAGIC2      equ 0xa3041767                  ; Total checksum
  40 ADV_MAGIC3      equ 0xdd28bf64                  ; Tail signature
  41
  42 ADV_LEN         equ 500                         ; Data bytes
  43
  44 adv_retries     equ 6                           ; Disk retries
  45
  46                 section .adv
  47                 ; Introduce the ADVs to valid but blank
  48 adv0:
  49 .head           resd 1
  50 .csum           resd 1
  51 .data           resb ADV_LEN
  52 .tail           resd 1
  53 .end            equ $
  54 adv1:
  55 .head           resd 1
  56 .csum           resd 1
  57 .data           resb ADV_LEN
  58 .tail           resd 1
  59 .end            equ $
  60                 section .text16
  61
  62                 ;
  63                 ; This is called after config file parsing, so we know
  64                 ; the intended location of the ADV
  65                 ;
  66 adv_init:
  67                 cmp byte [ADVDrive],-1
  68                 jne adv_read
  69
  70 ;%if IS_SYSLINUX || IS_MDSLINUX || IS_EXTLINUX
  71 %if IS_EXTLINUX         ; Not yet implemented for the other derivatives
  72                 ;
  73                 ; Update pointers to default ADVs...
  74                 ;
  75                 mov bx,[LDLSectors]
  76                 shl bx,2
  77                 mov ecx,[bsHidden]
  78                 mov eax,[bx+SectorPtrs-8]
  79                 mov edx,[bx+SectorPtrs-4]
  80                 add eax,ecx
  81                 add edx,ecx
  82                 mov [ADVSec0],eax
  83                 mov [ADVSec1],edx
  84                 mov al,[DriveNumber]
  85                 mov [ADVDrive],al
  86 %endif
  87                 ; ** fall through to adv_verify **
  88
  89                 ;
  90                 ; Initialize the ADV data structure in memory
  91                 ;
  92 adv_verify:
  93                 cmp byte [ADVDrive],-1          ; No ADV configured, still?
  94                 je .reset                       ; Then unconditionally reset
  95
  96                 mov si,adv0
  97                 call .check_adv
  98                 jz .ok                          ; Primary ADV okay
  99                 mov si,adv1
 100                 call .check_adv
 101                 jz .adv1ok
 102
 103                 ; Neither ADV is usable; initialize to blank
 104 .reset:
 105                 mov di,adv0
 106                 mov eax,ADV_MAGIC1
 107                 stosd
 108                 mov eax,ADV_MAGIC2
 109                 stosd
 110                 xor eax,eax
 111                 mov cx,ADV_LEN/4
 112                 rep stosd
 113                 mov eax,ADV_MAGIC3
 114                 stosd
 115
 116 .ok:
 117                 ret
 118
 119                 ; The primary ADV is bad, but the backup is OK
 120 .adv1ok:
 121                 mov di,adv0
 122                 mov cx,512/4
 123                 rep movsd
 124                 ret
 125
 126
 127                 ; SI points to the putative ADV; unchanged by routine
 128                 ; ZF=1 on return if good
 129 .check_adv:
 130                 push si
 131                 lodsd
 132                 cmp eax,ADV_MAGIC1
 133                 jne .done                       ; ZF=0, i.e. bad
 134                 xor edx,edx
 135                 mov cx,ADV_LEN/4+1              ; Remaining dwords
 136 .csum:
 137                 lodsd
 138                 add edx,eax
 139                 loop .csum
 140                 cmp edx,ADV_MAGIC2
 141                 jne .done
 142                 lodsd
 143                 cmp eax,ADV_MAGIC3
 144 .done:
 145                 pop si
 146                 ret
 147
 148 ;
 149 ; adv_get: find an ADV string if present
 150 ;
 151 ; Input:        DL      = ADV ID
 152 ; Output:       CX      = byte count (zero on not found)
 153 ;               SI      = pointer to data
 154 ;               DL      = unchanged
 155 ;
 156 ; Assumes CS == DS.
 157 ;
 158
 159 adv_get:
 160                 push ax
 161                 mov si,adv0.data
 162                 xor ax,ax                       ; Keep AH=0 at all times
 163 .loop:
 164                 lodsb                           ; Read ID
 165                 cmp al,dl
 166                 je .found
 167                 and al,al
 168                 jz .end
 169                 lodsb                           ; Read length
 170                 add si,ax
 171                 cmp si,adv0.tail
 172                 jb .loop
 173                 jmp .end
 174
 175 .found:
 176                 lodsb
 177                 mov cx,ax
 178                 add ax,si                       ; Make sure it fits
 179                 cmp ax,adv0.tail
 180                 jbe .ok
 181 .end:
 182                 xor cx,cx
 183 .ok:
 184                 pop ax
 185                 ret
 186
 187 ;
 188 ; adv_set: insert a string into the ADV in memory
 189 ;
 190 ; Input:        DL      = ADV ID
 191 ;               FS:BX   = input buffer
 192 ;               CX      = byte count (max = 255!)
 193 ; Output:       CF=1 on error
 194 ;               CX      clobbered
 195 ;
 196 ; Assumes CS == DS == ES.
 197 ;
 198 adv_set:
 199                 push ax
 200                 push si
 201                 push di
 202                 and ch,ch
 203                 jnz .overflow
 204
 205                 push cx
 206                 mov si,adv0.data
 207                 xor ax,ax
 208 .loop:
 209                 lodsb
 210                 cmp al,dl
 211                 je .found
 212                 and al,al
 213                 jz .endz
 214                 lodsb
 215                 add si,ax
 216                 cmp si,adv0.tail
 217                 jb .loop
 218                 jmp .end
 219
 220 .found:         ; Found, need to delete old copy
 221                 lodsb
 222                 lea di,[si-2]
 223                 push di
 224                 add si,ax
 225                 mov cx,adv0.tail
 226                 sub cx,si
 227                 jb .nukeit
 228                 rep movsb                       ; Remove the old one
 229                 mov [di],ah                     ; Termination zero
 230                 pop si
 231                 jmp .loop
 232 .nukeit:
 233                 pop si
 234                 jmp .end
 235 .endz:
 236                 dec si
 237 .end:
 238                 ; Now SI points to where we want to put our data
 239                 pop cx
 240                 mov di,si
 241                 jcxz .empty
 242                 add si,cx
 243                 cmp si,adv0.tail-2
 244                 jae .overflow                   ; CF=0
 245
 246                 mov si,bx
 247                 mov al,dl
 248                 stosb
 249                 mov al,cl
 250                 stosb
 251                 fs rep movsb
 252
 253 .empty:
 254                 mov cx,adv0.tail
 255                 sub cx,di
 256                 xor ax,ax
 257                 rep stosb                       ; Zero-fill remainder
 258
 259                 clc
 260 .done:
 261                 pop di
 262                 pop si
 263                 pop ax
 264                 ret
 265 .overflow:
 266                 stc
 267                 jmp .done
 268
 269 ;
 270 ; adv_cleanup:  checksum adv0 and copy to adv1
 271 ;               Assumes CS == DS == ES.
 272 ;
 273 adv_cleanup:
 274                 pushad
 275                 mov si,adv0.data
 276                 mov cx,ADV_LEN/4
 277                 xor edx,edx
 278 .loop:
 279                 lodsd
 280                 add edx,eax
 281                 loop .loop
 282                 mov eax,ADV_MAGIC2
 283                 sub eax,edx
 284                 lea di,[si+4]                   ; adv1
 285                 mov si,adv0
 286                 mov [si+4],eax                  ; Store checksum
 287                 mov cx,(ADV_LEN+12)/4
 288                 rep movsd
 289                 popad
 290                 ret
 291
 292 ;
 293 ; adv_write:    write the ADV to disk.
 294 ;
 295 ;               Location is in memory variables.
 296 ;               Assumes CS == DS == ES.
 297 ;
 298 ;               Returns CF=1 if the ADV cannot be written.
 299 ;
 300 adv_write:
 301                 cmp dword [ADVSec0],0
 302                 je .bad
 303                 cmp dword [ADVSec1],0
 304                 je .bad
 305                 cmp byte [ADVDrive],-1
 306                 je .bad
 307
 308                 push ax
 309                 call adv_cleanup
 310                 mov ah,3                        ; Write
 311                 call adv_read_write
 312                 pop ax
 313
 314                 clc
 315                 ret
 316 .bad:                                           ; No location for ADV set
 317                 stc
 318                 ret
 319
 320 ;
 321 ; adv_read:     read the ADV from disk
 322 ;
 323 ;               Location is in memory variables.
 324 ;               Assumes CS == DS == ES.
 325 ;
 326 adv_read:
 327                 push ax
 328                 mov ah,2                        ; Read
 329                 call adv_read_write
 330                 call adv_verify
 331                 pop ax
 332                 ret
 333
 334 ;
 335 ; adv_read_write: disk I/O for the ADV
 336 ;
 337 ;               On input, AH=2 for read, AH=3 for write.
 338 ;               Assumes CS == DS == ES.
 339 ;
 340 adv_read_write:
 341                 mov [ADVOp],ah
 342                 pushad
 343
 344                 ; Check for EDD
 345                 mov bx,55AAh
 346                 mov ah,41h                      ; EDD existence query
 347                 mov dl,[ADVDrive]
 348                 int 13h
 349                 mov si,.cbios
 350                 jc .noedd
 351                 cmp bx,0AA55h
 352                 jne .noedd
 353                 test cl,1
 354                 jz .noedd
 355                 mov si,.ebios
 356 .noedd:
 357
 358                 mov eax,[ADVSec0]
 359                 mov bx,adv0
 360                 call .doone
 361
 362                 mov eax,[ADVSec1]
 363                 mov bx,adv1
 364                 call .doone
 365
 366                 popad
 367                 ret
 368
 369 .doone:
 370                 xor edx,edx                     ; Zero-extend LBA
 371                 push si
 372                 jmp si
 373
 374 .ebios:
 375                 mov cx,adv_retries
 376 .eb_retry:
 377                 ; Form DAPA on stack
 378                 push edx
 379                 push eax
 380                 push es
 381                 push bx
 382                 push word 1                     ; Sector count
 383                 push word 16                    ; DAPA size
 384                 mov si,sp
 385                 pushad
 386                 mov dl,[ADVDrive]
 387                 mov ax,4000h
 388                 or ah,[ADVOp]
 389                 push ds
 390                 push ss
 391                 pop ds
 392                 int 13h
 393                 pop ds
 394                 popad
 395                 lea sp,[si+16]                  ; Remove DAPA
 396                 jc .eb_error
 397                 pop si
 398                 ret
 399 .eb_error:
 400                 loop .eb_retry
 401                 stc
 402                 pop si
 403                 ret
 404
 405 .cbios:
 406                 push edx
 407                 push eax
 408                 push bp
 409
 410                 mov dl,[ADVDrive]
 411                 and dl,dl
 412                 ; Floppies: can't trust INT 13h 08h, we better know
 413                 ; the geometry a priori, which means it better be our
 414                 ; boot device...
 415                 jns .noparm                     ; Floppy drive... urk
 416
 417                 mov ah,08h                      ; Get disk parameters
 418                 int 13h
 419                 jc .noparm
 420                 and ah,ah
 421                 jnz .noparm
 422                 shr dx,8
 423                 inc dx
 424                 movzx edi,dx                    ; EDI = heads
 425                 and cx,3fh
 426                 movzx esi,cx                    ; ESI = sectors/track
 427                 jmp .parmok
 428
 429 .noparm:
 430                 ; No CHS info... this better be our boot drive, then
 431 %if IS_SYSLINUX || IS_EXTLINUX
 432                 cmp dl,[DriveNumber]
 433                 jne .cb_overflow                ; Fatal error!
 434                 movzx esi,word [bsSecPerTrack]
 435                 movzx edi,word [bsHeads]
 436 %else
 437                 ; Not a disk-based derivative... there is no hope
 438                 jmp .cb_overflow
 439 %endif
 440
 441 .parmok:
 442                 ;
 443                 ; Dividing by sectors to get (track,sector): we may have
 444                 ; up to 2^18 tracks, so we need to use 32-bit arithmetric.
 445                 ;
 446                 div esi
 447                 xor cx,cx
 448                 xchg cx,dx              ; CX <- sector index (0-based)
 449                                         ; EDX <- 0
 450                 ; eax = track #
 451                 div edi                 ; Convert track to head/cyl
 452
 453                 ; Watch out for overflow, we might be writing!
 454                 cmp eax,1023
 455                 ja .cb_overflow
 456
 457                 ;
 458                 ; Now we have AX = cyl, DX = head, CX = sector (0-based),
 459                 ; BP = sectors to transfer, SI = bsSecPerTrack,
 460                 ; ES:BX = data target
 461                 ;
 462
 463                 shl ah,6                ; Because IBM was STOOPID
 464                                         ; and thought 8 bits were enough
 465                                         ; then thought 10 bits were enough...
 466                 inc cx                  ; Sector numbers are 1-based, sigh
 467                 or cl,ah
 468                 mov ch,al
 469                 mov dh,dl
 470                 mov dl,[ADVDrive]
 471                 mov al,01h              ; Transfer one sector
 472                 mov ah,[ADVOp]          ; Operation
 473
 474                 mov bp,adv_retries
 475 .cb_retry:
 476                 pushad
 477                 int 13h
 478                 popad
 479                 jc .cb_error
 480
 481 .cb_done:
 482                 pop bp
 483                 pop eax
 484                 pop edx
 485                 pop si
 486                 ret
 487
 488 .cb_error:
 489                 dec bp
 490                 jnz .cb_retry
 491 .cb_overflow:
 492                 stc
 493                 jmp .cb_done
 494
 495                 section .data16
 496                 alignz 4
 497 ADVSec0         dd 0                    ; Not specified
 498 ADVSec1         dd 0                    ; Not specified
 499 ADVDrive        db -1                   ; No ADV defined
 500 ADVCHSInfo      db -1                   ; We have CHS info for this drive
 501
 502                 section .bss16
 503 ADVOp           resb 1