4 m4_define([dbus_major_version], [1])
5 m4_define([dbus_minor_version], [4])
6 m4_define([dbus_micro_version], [3])
7 m4_define([dbus_version],
8 [dbus_major_version.dbus_minor_version.dbus_micro_version])
9 AC_INIT(dbus, [dbus_version])
15 AC_CONFIG_MACRO_DIR([m4])
17 AM_INIT_AUTOMAKE([1.9 tar-ustar -Wno-portability])
18 AM_CONFIG_HEADER(config.h)
21 ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
23 GETTEXT_PACKAGE=dbus-1
24 AC_SUBST(GETTEXT_PACKAGE)
25 AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE",[The name of the gettext domain])
27 ## must come before we use the $USE_MAINTAINER_MODE variable later
30 m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])])
32 AC_DEFINE_UNQUOTED(DBUS_DAEMON_NAME,"dbus-daemon",[Name of executable])
34 # libtool versioning - this applies to libdbus
36 # See http://sources.redhat.com/autobook/autobook/autobook_91.html#SEC91 for details
39 ## increment if the interface has additions, changes, removals.
42 ## increment any time the source changes; set to
43 ## 0 if you increment CURRENT
46 ## increment if any interfaces have been added; set to 0
47 ## if any interfaces have been changed or removed. removal has
48 ## precedence over adding, so set to 0 if both happened.
55 DBUS_MAJOR_VERSION=dbus_major_version
56 DBUS_MINOR_VERSION=dbus_minor_version
57 DBUS_MICRO_VERSION=dbus_micro_version
58 DBUS_VERSION=dbus_major_version.dbus_minor_version.dbus_micro_version
60 AC_SUBST(DBUS_MAJOR_VERSION)
61 AC_SUBST(DBUS_MINOR_VERSION)
62 AC_SUBST(DBUS_MICRO_VERSION)
63 AC_SUBST(DBUS_VERSION)
68 AC_USE_SYSTEM_EXTENSIONS
75 # Set some internal variables depending on the platform for later use.
96 # Special defines for certain platforms
97 if test "$dbus_win" = yes; then
98 AC_DEFINE(DBUS_WIN,1,[Defined if we run on a W32 API based system])
99 BUILD_TIMESTAMP=`date --iso-8601=minutes`
100 AC_SUBST(BUILD_TIMESTAMP)
101 # Assume DBUS_VERSION is always three numbers
102 BUILD_FILEVERSION=`echo "$DBUS_VERSION" | sed -e 's/\./,/g'`,0
103 AC_SUBST(BUILD_FILEVERSION)
104 AC_CHECK_TOOL(WINDRES, windres, no)
105 if test "$WINDRES" = no; then
106 AC_MSG_ERROR([*** Could not find an implementation of windres in your PATH.])
108 if test "$dbus_wince" = yes; then
109 AC_DEFINE(DBUS_WINCE,1,[Defined if we run on a W32 CE API based system])
110 AC_DEFINE(_WIN32_WCE, 0x0502, [Defined to get newer W32 CE APIs])
113 AC_DEFINE(DBUS_UNIX,1,[Defined if we run on a Unix-based system])
115 if test "$dbus_cygwin" = yes; then
116 AC_DEFINE(DBUS_CYGWIN,1,[Defined if we run on a cygwin API based system])
119 AM_CONDITIONAL(DBUS_WIN, test "$dbus_win" = yes)
120 AM_CONDITIONAL(DBUS_WINCE, test "$dbus_wince" = yes)
121 AM_CONDITIONAL(DBUS_UNIX, test "$dbus_unix" = yes)
122 AM_CONDITIONAL(DBUS_CYGWIN, test "$dbus_cygwin" = yes)
124 AC_ARG_ENABLE(tests, AS_HELP_STRING([--enable-tests],[enable unit test code]),enable_tests=$enableval,enable_tests=$USE_MAINTAINER_MODE)
125 AC_ARG_ENABLE(ansi, AS_HELP_STRING([--enable-ansi],[enable -ansi -pedantic gcc flags]),enable_ansi=$enableval,enable_ansi=no)
126 AC_ARG_ENABLE(verbose-mode, AS_HELP_STRING([--enable-verbose-mode],[support verbose debug mode]),enable_verbose_mode=$enableval,enable_verbose_mode=$USE_MAINTAINER_MODE)
127 AC_ARG_ENABLE(asserts, AS_HELP_STRING([--enable-asserts],[include assertion checks]),enable_asserts=$enableval,enable_asserts=$USE_MAINTAINER_MODE)
128 AC_ARG_ENABLE(checks, AS_HELP_STRING([--enable-checks],[include sanity checks on public API]),enable_checks=$enableval,enable_checks=yes)
129 AC_ARG_ENABLE(xml-docs, AS_HELP_STRING([--enable-xml-docs],[build XML documentation (requires xmlto)]),enable_xml_docs=$enableval,enable_xml_docs=auto)
130 AC_ARG_ENABLE(doxygen-docs, AS_HELP_STRING([--enable-doxygen-docs],[build DOXYGEN documentation (requires Doxygen)]),enable_doxygen_docs=$enableval,enable_doxygen_docs=auto)
131 AC_ARG_ENABLE(gcov, AS_HELP_STRING([--enable-gcov],[compile with coverage profiling instrumentation (gcc only)]),enable_gcov=$enableval,enable_gcov=no)
132 AC_ARG_ENABLE(abstract-sockets, AS_HELP_STRING([--enable-abstract-sockets],[use abstract socket namespace (linux only)]),enable_abstract_sockets=$enableval,enable_abstract_sockets=auto)
133 AC_ARG_ENABLE(selinux, AS_HELP_STRING([--enable-selinux],[build with SELinux support]),enable_selinux=$enableval,enable_selinux=auto)
134 AC_ARG_ENABLE(libaudit,AS_HELP_STRING([--enable-libaudit],[build audit daemon support for SELinux]),enable_libaudit=$enableval,enable_libaudit=auto)
135 AC_ARG_ENABLE(dnotify, AS_HELP_STRING([--enable-dnotify],[build with dnotify support (linux only)]),enable_dnotify=$enableval,enable_dnotify=auto)
136 AC_ARG_ENABLE(inotify, AS_HELP_STRING([--enable-inotify],[build with inotify support (linux only)]),enable_inotify=$enableval,enable_inotify=auto)
137 AC_ARG_ENABLE(kqueue, AS_HELP_STRING([--enable-kqueue],[build with kqueue support]),enable_kqueue=$enableval,enable_kqueue=auto)
138 AC_ARG_ENABLE(console-owner-file, AS_HELP_STRING([--enable-console-owner-file],[enable console owner file]),enable_console_owner_file=$enableval,enable_console_owner_file=auto)
139 AC_ARG_ENABLE(userdb-cache, AS_HELP_STRING([--enable-userdb-cache],[build with userdb-cache support]),enable_userdb_cache=$enableval,enable_userdb_cache=yes)
140 AC_ARG_ENABLE(launchd, AS_HELP_STRING([--enable-launchd],[build with launchd auto-launch support]),enable_launchd=$enableval,enable_launchd=auto)
142 AC_ARG_WITH(xml, AS_HELP_STRING([--with-xml=[libxml/expat]],[XML library to use (libxml may be named libxml2 on some systems)]))
143 AC_ARG_WITH(init-scripts, AS_HELP_STRING([--with-init-scripts=[redhat]],[Style of init scripts to install]))
144 AC_ARG_WITH(session-socket-dir, AS_HELP_STRING([--with-session-socket-dir=[dirname]],[Where to put sockets for the per-login-session message bus]))
145 AC_ARG_WITH(test-socket-dir, AS_HELP_STRING([--with-test-socket-dir=[dirname]],[Where to put sockets for make check]))
146 AC_ARG_WITH(system-pid-file, AS_HELP_STRING([--with-system-pid-file=[pidfile]],[PID file for systemwide daemon]))
147 AC_ARG_WITH(system-socket, AS_HELP_STRING([--with-system-socket=[filename]],[UNIX domain socket for systemwide daemon]))
148 AC_ARG_WITH(console-auth-dir, AS_HELP_STRING([--with-console-auth-dir=[dirname]],[directory to check for console ownerhip]))
149 AC_ARG_WITH(console-owner-file, AS_HELP_STRING([--with-console-owner-file=[filename]],[file whose owner determines current console owner]))
150 AC_ARG_WITH(launchd-agent-dir, AS_HELP_STRING([--with-launchd-agent-dir=[dirname]],[directory to put the launchd agent (default: /Library/LaunchAgents)]))
151 AC_ARG_WITH(dbus_user, AS_HELP_STRING([--with-dbus-user=<user>],[User for running the DBUS daemon (messagebus)]))
152 AC_ARG_WITH(dbus_daemondir, AS_HELP_STRING([--with-dbus-daemondir=[dirname]],[Directory for installing the DBUS daemon]))
154 dnl DBUS_BUILD_TESTS controls unit tests built in to .c files
155 dnl and also some stuff in the test/ subdir
156 AM_CONDITIONAL(DBUS_BUILD_TESTS, test x$enable_tests = xyes)
157 if test x$enable_tests = xyes; then
158 AC_DEFINE(DBUS_BUILD_TESTS,1,[Build test code])
161 if test x$enable_verbose_mode = xyes; then
162 AC_DEFINE(DBUS_ENABLE_VERBOSE_MODE,1,[Support a verbose mode])
165 if test x$enable_asserts = xno; then
166 AC_DEFINE(DBUS_DISABLE_ASSERT,1,[Disable assertion checking])
167 AC_DEFINE(G_DISABLE_ASSERT,1,[Disable GLib assertion macros])
170 # -rdynamic is needed for glibc's backtrace_symbols to work.
171 # No clue how much overhead this adds, but it's useful
172 # to do this on any assertion failure,
173 # so for now it's enabled anytime asserts are (currently not
174 # in production builds).
176 # To get -rdynamic you pass -export-dynamic to libtool.
177 AC_DEFINE(DBUS_BUILT_R_DYNAMIC,1,[whether -export-dynamic was passed to libtool])
178 R_DYNAMIC_LDFLAG=-export-dynamic
180 AC_SUBST(R_DYNAMIC_LDFLAG)
182 if test x$enable_checks = xno; then
183 AC_DEFINE(DBUS_DISABLE_CHECKS,1,[Disable public API sanity checking])
184 AC_DEFINE(G_DISABLE_CHECKS,1,[Disable GLib public API sanity checking])
187 if test x$enable_userdb_cache = xyes; then
188 AC_DEFINE(DBUS_ENABLE_USERDB_CACHE,1,[Build with caching of user data])
191 if test x$enable_gcov = xyes; then
192 ## so that config.h changes when you toggle gcov support
193 AC_DEFINE_UNQUOTED(DBUS_GCOV_ENABLED, 1, [Defined if gcov is enabled to force a rebuild due to config.h changing])
195 AC_MSG_CHECKING([for gcc 3.3 version of gcov file format])
197 AC_RUN_IFELSE( [AC_LANG_PROGRAM( , [[ if (__GNUC__ >=3 && __GNUC_MINOR__ >= 3) exit (0); else exit (1); ]])],
199 if test x$have_gcc33_gcov = xyes ; then
200 AC_DEFINE_UNQUOTED(DBUS_HAVE_GCC33_GCOV, 1, [Defined if we have gcc 3.3 and thus the new gcov format])
202 AC_MSG_RESULT($have_gcc33_gcov)
204 AM_CONDITIONAL(DBUS_GCOV_ENABLED, test x$enable_gcov = xyes)
206 # glibc21.m4 serial 3
207 dnl Copyright (C) 2000-2002, 2004 Free Software Foundation, Inc.
208 dnl This file is free software; the Free Software Foundation
209 dnl gives unlimited permission to copy and/or distribute it,
210 dnl with or without modifications, as long as this notice is preserved.
212 # Test for the GNU C Library, version 2.1 or newer.
215 AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
216 ac_cv_gnu_library_2_1,
217 [AC_EGREP_CPP([Lucky GNU user],
219 #include <features.h>
220 #ifdef __GNU_LIBRARY__
221 #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
226 ac_cv_gnu_library_2_1=yes,
227 ac_cv_gnu_library_2_1=no)
233 AC_CHECK_SIZEOF(char)
234 AC_CHECK_SIZEOF(short)
235 AC_CHECK_SIZEOF(long)
237 AC_CHECK_SIZEOF(void *)
238 AC_CHECK_SIZEOF(long long)
239 AC_CHECK_SIZEOF(__int64)
241 ### See what our 64 bit type is called
242 AC_MSG_CHECKING([64-bit integer type])
247 dbusint64_constant='(val)'
248 dbusuint64_constant='(val)'
249 dbusint64_printf_modifier='""'
253 dbusint64_constant='(val##L)'
254 dbusuint64_constant='(val##UL)'
255 dbusint64_printf_modifier='"l"'
257 $ac_cv_sizeof_long_long)
258 dbusint64='long long'
259 dbusint64_constant='(val##LL)'
260 dbusuint64_constant='(val##ULL)'
261 # Ideally we discover what the format is, but this is
262 # only used in verbose mode, so eh...
263 if test x"$ac_cv_gnu_library_2_1" = xyes; then
264 dbusint64_printf_modifier='"ll"'
267 $ac_cv_sizeof___int64)
269 dbusint64_constant='(val##i64)'
270 dbusuint64_constant='(val##ui64)'
272 if test x"$ac_cv_gnu_library_2_1" = xyes; then
273 dbusint64_printf_modifier='"ll"'
278 if test -z "$dbusint64" ; then
279 DBUS_INT64_TYPE="no_int64_type_detected"
282 DBUS_UINT64_CONSTANT=
283 AC_MSG_RESULT([none found])
285 DBUS_INT64_TYPE="$dbusint64"
287 DBUS_INT64_CONSTANT="$dbusint64_constant"
288 DBUS_UINT64_CONSTANT="$dbusuint64_constant"
289 if test x"$dbusint64_printf_modifier" != x; then
290 AC_DEFINE_UNQUOTED(DBUS_INT64_PRINTF_MODIFIER, [$dbusint64_printf_modifier], [Define to printf modifier for 64 bit integer type])
292 AC_MSG_RESULT($DBUS_INT64_TYPE)
295 AC_SUBST(DBUS_INT64_TYPE)
296 AC_SUBST(DBUS_INT64_CONSTANT)
297 AC_SUBST(DBUS_UINT64_CONSTANT)
298 AC_SUBST(DBUS_HAVE_INT64)
300 ### see what 32-bit int is called
301 AC_MSG_CHECKING([32-bit integer type])
315 if test -z "$dbusint32" ; then
316 DBUS_INT32_TYPE="no_int32_type_detected"
317 AC_MSG_ERROR([No 32-bit integer type found])
319 DBUS_INT32_TYPE="$dbusint32"
320 AC_MSG_RESULT($DBUS_INT32_TYPE)
323 AC_SUBST(DBUS_INT32_TYPE)
325 ### see what 16-bit int is called
326 AC_MSG_CHECKING([16-bit integer type])
337 if test -z "$dbusint16" ; then
338 DBUS_INT16_TYPE="no_int16_type_detected"
339 AC_MSG_ERROR([No 16-bit integer type found])
341 DBUS_INT16_TYPE="$dbusint16"
342 AC_MSG_RESULT($DBUS_INT16_TYPE)
345 AC_SUBST(DBUS_INT16_TYPE)
350 # check at compile-time, so that it is possible to build universal
351 # (with multiple architectures at once on the compile line)
352 AH_VERBATIM([WORDS_BIGENDIAN_DARWIN], [
353 /* Use the compiler-provided endianness defines to allow universal compiling. */
354 #if defined(__BIG_ENDIAN__)
355 #define WORDS_BIGENDIAN 1
364 dnl **********************************
365 dnl *** va_copy checks (from GLib) ***
366 dnl **********************************
367 dnl we currently check for all three va_copy possibilities, so we get
368 dnl all results in config.log for bug reports.
369 AC_CACHE_CHECK([for an implementation of va_copy()],dbus_cv_va_copy,[
370 AC_LINK_IFELSE([#include <stdarg.h>
372 static void f (int i, ...) {
373 va_list args1, args2;
375 va_copy (args2, args1);
376 if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
378 va_end (args1); va_end (args2);
384 [dbus_cv_va_copy=yes],
385 [dbus_cv_va_copy=no])
387 AC_CACHE_CHECK([for an implementation of __va_copy()],dbus_cv___va_copy,[
388 AC_LINK_IFELSE([#include <stdarg.h>
390 static void f (int i, ...) {
391 va_list args1, args2;
393 __va_copy (args2, args1);
394 if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
396 va_end (args1); va_end (args2);
402 [dbus_cv___va_copy=yes],
403 [dbus_cv___va_copy=no])
406 if test "x$dbus_cv_va_copy" = "xyes"; then
407 dbus_va_copy_func=va_copy
408 else if test "x$dbus_cv___va_copy" = "xyes"; then
409 dbus_va_copy_func=__va_copy
413 if test -n "$dbus_va_copy_func"; then
414 AC_DEFINE_UNQUOTED(DBUS_VA_COPY,$dbus_va_copy_func,[A 'va_copy' style function])
418 AC_CACHE_CHECK([whether va_lists can be copied by value],
420 [AC_RUN_IFELSE([AC_LANG_PROGRAM(
426 static void f (int i, ...) {
427 va_list args1, args2;
430 if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
432 va_end (args1); va_end (args2);
439 [dbus_cv_va_val_copy=yes],
440 [dbus_cv_va_val_copy=no],
441 [dbus_cv_va_val_copy=yes])
445 if test "x$dbus_cv_va_val_copy" = "xno"; then
446 AC_DEFINE(DBUS_VA_COPY_AS_ARRAY,1, ['va_lists' cannot be copies as values])
452 AC_CACHE_CHECK([whether $CC knows __sync_sub_and_fetch()],
453 dbus_cv_sync_sub_and_fetch,
455 AC_LANG_PROGRAM([], [[int a = 4; int b = __sync_sub_and_fetch(&a, 4); exit(b); ]]),
456 [dbus_cv_sync_sub_and_fetch=yes],
457 [dbus_cv_sync_sub_and_fetch=no])
460 if test "x$dbus_cv_sync_sub_and_fetch" = "xyes" ; then
466 AC_DEFINE_UNQUOTED([DBUS_USE_SYNC], [$have_sync], [Use the gcc __sync extension])
468 #### Various functions
469 AC_SEARCH_LIBS(socket,[socket network])
470 AC_CHECK_FUNC(gethostbyname,,[AC_CHECK_LIB(nsl,gethostbyname)])
472 AC_CHECK_FUNCS(vsnprintf vasprintf nanosleep usleep setenv clearenv unsetenv socketpair getgrouplist fpathconf setrlimit poll setlocale localeconv strtoll strtoull)
474 #### Check for broken poll; taken from Glib's configure
476 AC_MSG_CHECKING([for broken poll])
477 AC_RUN_IFELSE([AC_LANG_SOURCE([[
481 #ifdef HAVE_SYS_POLL_H
482 #include <sys/poll.h>
485 struct pollfd fds[1];
487 fd = open("/dev/null", 1);
489 fds[0].events = POLLIN;
491 if (poll(fds, 1, 0) < 0 || (fds[0].revents & POLLNVAL) != 0) {
492 exit(1); /* Does not work for devices -- fail */
498 AC_DEFINE(BROKEN_POLL,1,[poll doesn't work on devices])],
499 [broken_poll="no (cross compiling)"])
500 AC_MSG_RESULT($broken_poll)
502 AC_MSG_CHECKING(for dirfd)
504 #include <sys/types.h>
512 dbus_have_dirfd=yes, dbus_have_dirfd=no)
513 AC_MSG_RESULT($dbus_have_dirfd)
514 if test "$dbus_have_dirfd" = yes; then
515 AC_DEFINE(HAVE_DIRFD,1,[Have dirfd function])
517 AC_MSG_CHECKING(for DIR *dirp->dd_fd)
519 #include <sys/types.h>
528 dbus_have_ddfd=yes, dbus_have_ddfd=no)
529 AC_MSG_RESULT($dbus_have_ddfd)
530 if test "$dbus_have_ddfd" = yes; then
531 AC_DEFINE(HAVE_DDFD,1,[Have the ddfd member of DIR])
535 AC_CHECK_HEADERS(sys/resource.h)
537 AC_CHECK_HEADERS(dirent.h)
539 AC_CHECK_HEADERS(execinfo.h, [AC_CHECK_FUNCS(backtrace)])
541 AC_CHECK_HEADERS(errno.h)
543 AC_CHECK_HEADERS(signal.h)
545 AC_CHECK_HEADERS(locale.h)
547 AC_CHECK_HEADERS(byteswap.h)
549 AC_CHECK_HEADERS(unistd.h)
551 AC_CHECK_HEADERS(ws2tcpip.h)
553 AC_CHECK_HEADERS(wspiapi.h)
555 # Add -D_POSIX_PTHREAD_SEMANTICS if on Solaris
559 CFLAGS="$CFLAGS -D_POSIX_PTHREAD_SEMANTICS" ;;
562 # checking for a posix version of getpwnam_r
563 # if we are cross compiling and can not run the test
564 # assume getpwnam_r is the posix version
565 # it is up to the person cross compiling to change
566 # this behavior if desired
568 AC_CACHE_CHECK([for posix getpwnam_r],
569 ac_cv_func_posix_getpwnam_r,
570 [AC_RUN_IFELSE([AC_LANG_PROGRAM(
577 struct passwd pwd, *pwptr = &pwd;
580 error = getpwnam_r ("", &pwd, buffer,
581 sizeof (buffer), &pwptr);
582 return (error < 0 && errno == ENOSYS)
585 [ac_cv_func_posix_getpwnam_r=yes],
586 [ac_cv_func_posix_getpwnam_r=no],
587 [ac_cv_func_posix_getpwnam_r=yes]
591 if test "$ac_cv_func_posix_getpwnam_r" = yes; then
592 AC_DEFINE(HAVE_POSIX_GETPWNAM_R,1,
593 [Have POSIX function getpwnam_r])
595 AC_CACHE_CHECK([for nonposix getpwnam_r],
596 ac_cv_func_nonposix_getpwnam_r,
597 [AC_TRY_LINK([#include <pwd.h>],
600 getpwnam_r ("", &pwd, buffer,
602 [ac_cv_func_nonposix_getpwnam_r=yes],
603 [ac_cv_func_nonposix_getpwnam_r=no])])
604 if test "$ac_cv_func_nonposix_getpwnam_r" = yes; then
605 AC_DEFINE(HAVE_NONPOSIX_GETPWNAM_R,1,
606 [Have non-POSIX function getpwnam_r])
610 dnl check for socklen_t
611 AC_MSG_CHECKING(whether socklen_t is defined)
613 #include <sys/types.h>
614 #include <sys/socket.h>
619 ],dbus_have_socklen_t=yes,dbus_have_socklen_t=no)
620 AC_MSG_RESULT($dbus_have_socklen_t)
622 if test "x$dbus_have_socklen_t" = "xyes"; then
623 AC_DEFINE(HAVE_SOCKLEN_T,1,[Have socklen_t type])
626 dnl check for writev header and writev function so we're
627 dnl good to go if HAVE_WRITEV gets defined.
628 AC_CHECK_HEADERS(sys/uio.h, [AC_CHECK_FUNCS(writev)])
630 dnl needed on darwin for NAME_MAX
631 AC_CHECK_HEADERS(sys/syslimits.h)
633 dnl Make it easy to check if we have MSG_NOSIGNAL without actually having to include sys/socket.h
634 AC_CHECK_DECLS([MSG_NOSIGNAL], [], [], [[ #include <sys/socket.h> ]])
636 dnl check for flavours of varargs macros (test from GLib)
637 AC_MSG_CHECKING(for ISO C99 varargs macros in C)
639 int a(int p1, int p2, int p3);
640 #define call_a(...) a(1,__VA_ARGS__)
642 ],dbus_have_iso_c_varargs=yes,dbus_have_iso_c_varargs=no)
643 AC_MSG_RESULT($dbus_have_iso_c_varargs)
645 AC_MSG_CHECKING(for GNUC varargs macros)
647 int a(int p1, int p2, int p3);
648 #define call_a(params...) a(1,params)
650 ],dbus_have_gnuc_varargs=yes,dbus_have_gnuc_varargs=no)
651 AC_MSG_RESULT($dbus_have_gnuc_varargs)
653 dnl Output varargs tests
654 if test x$dbus_have_iso_c_varargs = xyes; then
655 AC_DEFINE(HAVE_ISO_VARARGS,1,[Have ISO C99 varargs macros])
657 if test x$dbus_have_gnuc_varargs = xyes; then
658 AC_DEFINE(HAVE_GNUC_VARARGS,1,[Have GNU-style varargs macros])
661 dnl Check for various credentials.
662 AC_MSG_CHECKING(for struct cmsgcred)
664 #include <sys/types.h>
665 #include <sys/socket.h>
667 struct cmsgcred cred;
670 ],dbus_have_struct_cmsgcred=yes,dbus_have_struct_cmsgcred=no)
671 AC_MSG_RESULT($dbus_have_struct_cmsgcred)
673 if test x$dbus_have_struct_cmsgcred = xyes; then
674 AC_DEFINE(HAVE_CMSGCRED,1,[Have cmsgcred structure])
677 AC_CHECK_FUNCS(getpeerucred getpeereid)
679 AC_CHECK_FUNCS(pipe2 accept4)
681 #### Abstract sockets
683 if test x$enable_abstract_sockets = xauto; then
686 AC_CACHE_CHECK([abstract socket namespace],
687 ac_cv_have_abstract_sockets,
688 [AC_RUN_IFELSE([AC_LANG_PROGRAM(
690 #include <sys/types.h>
694 #include <sys/socket.h>
701 struct sockaddr_un addr;
703 listen_fd = socket (PF_UNIX, SOCK_STREAM, 0);
707 fprintf (stderr, "socket() failed: %s\n", strerror (errno));
711 memset (&addr, '\0', sizeof (addr));
712 addr.sun_family = AF_UNIX;
713 strcpy (addr.sun_path, "X/tmp/dbus-fake-socket-path-used-in-configure-test");
714 /* SUN_LEN uses strlen() so need to calculate it before adding \0 at the
717 slen = SUN_LEN(&addr);
718 addr.sun_path[0] = '\0'; /* this is what makes it abstract */
720 if (bind (listen_fd, (struct sockaddr*) &addr, slen) < 0)
722 fprintf (stderr, "Abstract socket namespace bind() failed: %s\n",
729 [ac_cv_have_abstract_sockets=yes],
730 [ac_cv_have_abstract_sockets=no],
732 ac_cv_have_abstract_sockets=no
736 if test x$warn_on_xcompile = xyes ; then
737 AC_MSG_WARN([Cannot check for abstract sockets when cross-compiling, please use --enable-abstract-sockets])
742 if test x$enable_abstract_sockets = xyes; then
743 if test x$ac_cv_have_abstract_sockets = xno; then
744 AC_MSG_ERROR([Abstract sockets explicitly required, and support not detected.])
748 if test x$enable_abstract_sockets = xno; then
749 ac_cv_have_abstract_sockets=no;
752 if test x$ac_cv_have_abstract_sockets = xyes ; then
753 DBUS_PATH_OR_ABSTRACT=abstract
754 AC_DEFINE(HAVE_ABSTRACT_SOCKETS,1,[Have abstract socket namespace])
756 DBUS_PATH_OR_ABSTRACT=path
759 # this is used in addresses to prefer abstract, e.g.
760 # unix:path=/foo or unix:abstract=/foo
761 AC_SUBST(DBUS_PATH_OR_ABSTRACT)
765 #### Sort out XML library
768 AC_CHECK_LIB(expat, XML_ParserCreate_MM,
769 [ AC_CHECK_HEADERS(expat.h, have_expat=true, have_expat=false) ],
772 # see what we want to use
773 dbus_use_libxml=false
775 if test x$with_xml = xexpat; then
776 if ! $have_expat ; then
777 AC_MSG_ERROR([Explicitly requested expat but expat not found])
780 elif test x$with_xml = xlibxml; then
781 PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= 2.6.0, have_libxml=true, have_libxml=false)
782 if ! $have_libxml ; then
783 AC_MSG_ERROR([Explicitly requested libxml but libxml not found])
787 ### expat is the default because libxml can't currently survive
788 ### our brutal OOM-handling unit test setup.
789 ### http://bugzilla.gnome.org/show_bug.cgi?id=109368
790 if test x$have_expat = xfalse; then
791 AC_MSG_ERROR([Could not find expat.h, check config.log for failed attempts])
793 ### By default, only use Expat since it's tested and known to work. If you're a
794 ### general-purpose OS vendor, please don't enable libxml. For embedded use
795 ### if your OS is built around libxml, that's another case.
799 AM_CONDITIONAL(DBUS_USE_EXPAT, $dbus_use_expat)
800 AM_CONDITIONAL(DBUS_USE_LIBXML, $dbus_use_libxml)
802 if $dbus_use_expat; then
806 if $dbus_use_libxml; then
807 XML_LIBS=$LIBXML_LIBS
808 XML_CFLAGS=$LIBXML_CFLAGS
811 # Thread lib detection
812 AC_CHECK_FUNC(pthread_cond_timedwait,[AC_CHECK_LIB(pthread,pthread_cond_timedwait,
813 [THREAD_LIBS="-lpthread"])])
815 LIBS="$LIBS $THREAD_LIBS"
816 AC_CHECK_FUNC(pthread_condattr_setclock,have_pthread_condattr_setclock=true,have_pthread_condattr_setclock=false)
817 if test x$have_pthread_condattr_setclock = xtrue; then
818 AC_SEARCH_LIBS([clock_getres],[rt],[THREAD_LIBS="$THREAD_LIBS -lrt"])
819 AC_MSG_CHECKING([for CLOCK_MONOTONIC])
820 AC_TRY_COMPILE([#include <time.h>
823 struct timespec monotonic_timer;
824 pthread_condattr_t attr;
825 pthread_condattr_init (&attr);
826 pthread_condattr_setclock (&attr, CLOCK_MONOTONIC);
827 clock_getres (CLOCK_MONOTONIC,&monotonic_timer);
828 ], have_clock_monotonic=true, have_clock_monotonic=false)
829 if test x$have_clock_monotonic = xtrue; then
830 AC_MSG_RESULT([found])
831 AC_DEFINE(HAVE_MONOTONIC_CLOCK, 1, [Define if we have CLOCK_MONOTONIC])
833 AC_MSG_RESULT([not found])
839 if test x$enable_selinux = xno ; then
842 # See if we have SELinux library
843 AC_CHECK_LIB(selinux, is_selinux_enabled,
844 have_selinux=yes, have_selinux=no)
846 # see if we have the SELinux header with the new D-Bus stuff in it
847 if test x$have_selinux = xyes ; then
848 AC_MSG_CHECKING([for DBUS Flask permissions in selinux/av_permissions.h])
849 AC_TRY_COMPILE([#include <selinux/av_permissions.h>],
850 [#ifdef DBUS__ACQUIRE_SVC return 0;
852 #error DBUS__ACQUIRE_SVC not defined
854 have_selinux=yes, have_selinux=no)
855 AC_MSG_RESULT($have_selinux)
858 if test x$enable_selinux = xauto ; then
859 if test x$have_selinux = xno ; then
860 AC_MSG_WARN([Sufficiently new SELinux library not found])
863 if test x$have_selinux = xno ; then
864 AC_MSG_ERROR([SElinux explicitly required, and SELinux library not found])
869 AM_CONDITIONAL(HAVE_SELINUX, test x$have_selinux = xyes)
871 if test x$have_selinux = xyes ; then
872 # the selinux code creates threads
873 # which requires libpthread even on linux
874 AC_CHECK_FUNC(pthread_create,,[AC_CHECK_LIB(pthread,pthread_create,
875 [SELINUX_THREAD_LIBS="-lpthread"])])
877 SELINUX_LIBS="-lselinux $SELINUX_THREAD_LIBS"
878 AC_DEFINE(HAVE_SELINUX,1,[SELinux support])
884 if test x$enable_inotify = xno ; then
887 AC_CHECK_HEADERS(sys/inotify.h, have_inotify=yes, have_inotify=no)
890 dnl check if inotify backend is enabled
891 if test x$have_inotify = xyes; then
892 AC_DEFINE(DBUS_BUS_ENABLE_INOTIFY,1,[Use inotify])
893 AC_CHECK_FUNCS(inotify_init1)
896 AM_CONDITIONAL(DBUS_BUS_ENABLE_INOTIFY, test x$have_inotify = xyes)
899 if test x$enable_dnotify = xno ; then
902 if test x$have_inotify = xno -a x$host_os = xlinux-gnu -o x$host_os = xlinux; then
909 dnl check if dnotify backend is enabled
910 if test x$have_dnotify = xyes; then
911 AC_DEFINE(DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX,1,[Use dnotify on Linux])
914 AM_CONDITIONAL(DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX, test x$have_dnotify = xyes)
917 if test x$enable_kqueue = xno ; then
921 AC_CHECK_HEADER(sys/event.h, , have_kqueue=no)
922 AC_CHECK_FUNC(kqueue, , have_kqueue=no)
924 if test x$enable_kqueue = xyes -a x$have_kqueue = xno; then
925 AC_MSG_ERROR(kqueue support explicitly enabled but not available)
929 dnl check if kqueue backend is enabled
930 if test x$have_kqueue = xyes; then
931 AC_DEFINE(DBUS_BUS_ENABLE_KQUEUE,1,[Use kqueue])
934 AM_CONDITIONAL(DBUS_BUS_ENABLE_KQUEUE, test x$have_kqueue = xyes)
937 if test x$enable_launchd = xno ; then
941 AC_CHECK_HEADER([launch.h], , have_launchd=no)
942 AC_PATH_PROG([LAUNCHCTL], [launchctl])
943 if test "x$LAUNCHCTL" = "x"; then
947 if test x$enable_launchd = xyes && test x$have_launchd = xno ; then
948 AC_MSG_ERROR([launchd support explicitly enabled but not available])
952 dnl check if launchd is enabled
953 if test x$have_launchd = xyes; then
954 AC_DEFINE(DBUS_ENABLE_LAUNCHD,1,[Use launchd autolaunch])
957 AM_CONDITIONAL(DBUS_ENABLE_LAUNCHD, test x$have_launchd = xyes)
959 #### Directory to place launchd agent file
960 if test "x$with_launchd_agent_dir" = "x"; then
961 LAUNCHD_AGENT_DIR="/Library/LaunchAgents"
963 LAUNCHD_AGENT_DIR="$with_launchd_agent_dir"
966 AC_SUBST(LAUNCHD_AGENT_DIR)
968 dnl console owner file
969 if test x$enable_console_owner_file = xno ; then
970 have_console_owner_file=no;
974 have_console_owner_file=yes;
975 AC_DEFINE(HAVE_CONSOLE_OWNER_FILE,1,[Have console owner file])
978 have_console_owner_file=no;;
982 AM_CONDITIONAL(HAVE_CONSOLE_OWNER_FILE, test x$have_console_owner_file = xyes)
985 if test x$enable_libaudit = xno ; then
988 # See if we have audit daemon & capabilities library
989 AC_CHECK_LIB(audit, audit_log_user_avc_message,
990 have_libaudit=yes, have_libaudit=no)
991 if test x$have_libaudit = xyes ; then
992 AC_CHECK_LIB(cap-ng, capng_clear,
993 have_libaudit=yes, have_libaudit=no)
997 AM_CONDITIONAL(HAVE_LIBAUDIT, test x$have_libaudit = xyes)
999 if test x$have_libaudit = xyes ; then
1000 SELINUX_LIBS="$SELINUX_LIBS -laudit -lcap-ng"
1001 AC_DEFINE(HAVE_LIBAUDIT,1,[audit daemon SELinux support])
1005 AC_MSG_CHECKING(for ADT API)
1006 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1007 #include <bsm/adt.h>
1008 adt_user_context = ADT_USER;
1009 ]], [[]])], [ check_adt_audit=yes ], [ check_adt_audit=no ])
1011 if test ${check_adt_audit} = yes
1013 AC_DEFINE([HAVE_ADT], [], [Adt audit API])
1021 # Check for SCM_RIGHTS
1022 AC_MSG_CHECKING([for SCM_RIGHTS])
1023 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1024 #include <sys/socket.h>
1026 static int x = SCM_RIGHTS;
1028 [ AC_MSG_RESULT([supported])
1029 AC_DEFINE([HAVE_UNIX_FD_PASSING], [1], [Supports sending UNIX file descriptors]) ],
1030 [ AC_MSG_RESULT([not supported]) ])
1033 if test x$dbus_win = xyes ; then
1034 if test x$dbus_wince = xyes ; then
1035 NETWORK_libs="-lws2"
1037 NETWORK_libs="-lws2_32"
1041 #### Set up final flags
1043 DBUS_CLIENT_LIBS="$THREAD_LIBS $NETWORK_libs"
1044 AC_SUBST(DBUS_CLIENT_CFLAGS)
1045 AC_SUBST(DBUS_CLIENT_LIBS)
1047 DBUS_BUS_CFLAGS="$XML_CFLAGS"
1048 DBUS_BUS_LIBS="$XML_LIBS $SELINUX_LIBS $THREAD_LIBS $ADT_LIBS $NETWORK_libs"
1049 AC_SUBST(DBUS_BUS_CFLAGS)
1050 AC_SUBST(DBUS_BUS_LIBS)
1052 DBUS_LAUNCHER_CFLAGS="$XML_CFLAGS"
1053 DBUS_LAUNCHER_LIBS="$XML_LIBS $THREAD_LIBS $NETWORK_libs"
1054 AC_SUBST(DBUS_LAUNCHER_CFLAGS)
1055 AC_SUBST(DBUS_LAUNCHER_LIBS)
1058 DBUS_TEST_LIBS="$THREAD_LIBS $NETWORK_libs"
1059 AC_SUBST(DBUS_TEST_CFLAGS)
1060 AC_SUBST(DBUS_TEST_LIBS)
1063 if test x$dbus_win = xyes ; then
1068 ## for now enable_x11 just tracks have_x11,
1069 ## there's no --enable-x11
1070 if test x$no_x = xyes ; then
1078 if test x$enable_x11 = xyes ; then
1079 AC_DEFINE(DBUS_BUILD_X11,1,[Build X11-dependent code])
1080 DBUS_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS"
1081 DBUS_X_CFLAGS="$X_CFLAGS"
1087 AC_SUBST(DBUS_X_CFLAGS)
1088 AC_SUBST(DBUS_X_LIBS)
1092 #### gcc warning flags
1094 cc_supports_flag() {
1095 AC_MSG_CHECKING(whether $CC supports "$*")
1096 save_CFLAGS="$CFLAGS"
1098 AC_TRY_COMPILE([], [], [rc=yes], [rc=no])
1099 CFLAGS="$save_CFLAGS"
1100 AC_MSG_RESULT([$rc])
1104 ld_supports_flag() {
1105 AC_MSG_CHECKING([whether $LD supports "$@"])
1107 int one(void) { return 1; }
1108 int two(void) { return 2; }
1109 ], [ two(); ] , [_ac_ld_flag_supported=yes], [_ac_ld_flag_supported=no])
1111 if test "$_ac_ld_flag_supported" = "yes"; then
1114 if $CC -c conftest.c; then
1115 ld_out=`$LD $@ -o conftest conftest.o 2>&1`
1117 if test $ld_ret -ne 0 ; then
1118 _ac_ld_flag_supported=no
1119 elif echo "$ld_out" | egrep 'option ignored|^usage:|unrecognized option|illegal option' >/dev/null ; then
1120 _ac_ld_flag_supported=no
1123 rm -f conftest.c conftest.o conftest
1126 AC_MSG_RESULT($_ac_ld_flag_supported)
1127 if test "$_ac_ld_flag_supported" = "yes" ; then
1134 # Don't bother with -Werror on Windows for now, too many warnings
1135 if test x$dbus_win != xyes -a x$dbus_cygwin != xyes -a x$USE_MAINTAINER_MODE = xyes; then
1136 if cc_supports_flag "-Werror"; then
1137 CFLAGS="$CFLAGS -Werror"
1141 if test "x$GCC" = "xyes"; then
1144 *[\ \ ]-Wall[\ \ ]*) ;;
1145 *) CFLAGS="$CFLAGS -Wall" ;;
1149 *[\ \ ]-Wchar-subscripts[\ \ ]*) ;;
1150 *) CFLAGS="$CFLAGS -Wchar-subscripts" ;;
1154 *[\ \ ]-Wmissing-declarations[\ \ ]*) ;;
1155 *) CFLAGS="$CFLAGS -Wmissing-declarations" ;;
1159 *[\ \ ]-Wmissing-prototypes[\ \ ]*) ;;
1160 *) CFLAGS="$CFLAGS -Wmissing-prototypes" ;;
1164 *[\ \ ]-Wnested-externs[\ \ ]*) ;;
1165 *) CFLAGS="$CFLAGS -Wnested-externs" ;;
1169 *[\ \ ]-Wpointer-arith[\ \ ]*) ;;
1170 *) CFLAGS="$CFLAGS -Wpointer-arith" ;;
1174 *[\ \ ]-Wcast-align[\ \ ]*) ;;
1175 *) CFLAGS="$CFLAGS -Wcast-align" ;;
1179 *[\ \ ]-Wfloat-equal[\ \ ]*) ;;
1180 *) if cc_supports_flag -Wfloat-equal; then
1181 CFLAGS="$CFLAGS -Wfloat-equal"
1187 *[\ \ ]-Wdeclaration-after-statement[\ \ ]*) ;;
1188 *) if cc_supports_flag -Wdeclaration-after-statement; then
1189 CFLAGS="$CFLAGS -Wdeclaration-after-statement"
1195 *[\ \ ]-fno-common[\ \ ]*) ;;
1196 *) if cc_supports_flag -fno-common; then
1197 CFLAGS="$CFLAGS -fno-common"
1203 *[\ \ ]-fPIC[\ \ ]*) ;;
1204 *) if test x$dbus_win = xno && cc_supports_flag -fPIC; then
1206 if ld_supports_flag -z,relro; then
1207 PIC_LDFLAGS="-Wl,-z,relro"
1214 *[\ \ ]-fPIE[\ \ ]*) ;;
1215 *) if test x$dbus_win = xno && cc_supports_flag -fPIE; then
1217 if ld_supports_flag -z,relro; then
1218 PIE_LDFLAGS="-pie -Wl,-z,relro"
1226 ### Disabled warnings, and compiler flag overrides
1228 # Let's just ignore unused for now
1230 *[\ \ ]-Wno-unused[\ \ ]*) ;;
1231 *) CFLAGS="$CFLAGS -Wno-unused" ;;
1234 # This group is for warnings we currently don't pass.
1235 # We would like to, however. Please fix.
1237 # http://bugs.freedesktop.org/show_bug.cgi?id=17433
1239 *[\ \ ]-Wno-sign-compare[\ \ ]*) ;;
1240 *) CFLAGS="$CFLAGS -Wno-sign-compare" ;;
1243 *[\ \ ]-Wno-pointer-sign[\ \ ]*) ;;
1244 *) if cc_supports_flag -Wno-pointer-sign; then
1245 CFLAGS="$CFLAGS -Wno-pointer-sign"
1250 # This one is special - it's not a warning override.
1251 # http://bugs.freedesktop.org/show_bug.cgi?id=10599
1253 *[\ \ ]-fno-strict-aliasing[\ \ ]*) ;;
1254 *) CFLAGS="$CFLAGS -fno-strict-aliasing" ;;
1256 ### End disabled warnings
1258 if test "x$enable_ansi" = "xyes"; then
1260 *[\ \ ]-ansi[\ \ ]*) ;;
1261 *) CFLAGS="$CFLAGS -ansi" ;;
1265 *[\ \ ]-D_POSIX_C_SOURCE*) ;;
1266 *) CFLAGS="$CFLAGS -D_POSIX_C_SOURCE=199309L" ;;
1270 *[\ \ ]-D_BSD_SOURCE[\ \ ]*) ;;
1271 *) CFLAGS="$CFLAGS -D_BSD_SOURCE" ;;
1275 *[\ \ ]-pedantic[\ \ ]*) ;;
1276 *) CFLAGS="$CFLAGS -pedantic" ;;
1279 if test x$enable_gcov = xyes; then
1281 *[\ \ ]-fprofile-arcs[\ \ ]*) ;;
1282 *) CFLAGS="$CFLAGS -fprofile-arcs" ;;
1285 *[\ \ ]-ftest-coverage[\ \ ]*) ;;
1286 *) CFLAGS="$CFLAGS -ftest-coverage" ;;
1289 ## remove optimization
1290 CFLAGS=`echo "$CFLAGS" | sed -e 's/-O[0-9]*//g'`
1294 if test x$enable_gcov = xyes; then
1295 AC_MSG_ERROR([--enable-gcov can only be used with gcc])
1299 AC_SUBST(PIC_CFLAGS)
1300 AC_SUBST(PIC_LDFLAGS)
1301 AC_SUBST(PIE_CFLAGS)
1302 AC_SUBST(PIE_LDFLAGS)
1304 if ld_supports_flag --gc-sections; then
1305 SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS"
1306 CFLAGS="-ffunction-sections -fdata-sections $CFLAGS"
1308 AC_SUBST(SECTION_FLAGS)
1309 AC_SUBST(SECTION_LDFLAGS)
1310 AC_MSG_RESULT($ac_gcsections)
1314 # Solaris' C library apparently needs these runes to be threadsafe...
1315 CFLAGS="$CFLAGS -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT"
1319 # compress spaces in flags
1320 CFLAGS=`echo "$CFLAGS" | sed -e 's/ +/ /g'`
1321 CXXFLAGS=`echo "$CXXFLAGS" | sed -e 's/ +/ /g'`
1322 CPPFLAGS=`echo "$CPPFLAGS" | sed -e 's/ +/ /g'`
1325 ### Doxygen Documentation
1327 AC_PATH_PROG(DOXYGEN, doxygen, no)
1329 AC_MSG_CHECKING([whether to build Doxygen documentation])
1331 if test x$DOXYGEN = xno ; then
1337 if test x$enable_doxygen_docs = xauto ; then
1338 if test x$have_doxygen = xno ; then
1339 enable_doxygen_docs=no
1341 enable_doxygen_docs=yes
1345 if test x$enable_doxygen_docs = xyes; then
1346 if test x$have_doxygen = xno; then
1347 AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found])
1351 AM_CONDITIONAL(DBUS_DOXYGEN_DOCS_ENABLED, test x$enable_doxygen_docs = xyes)
1352 AC_MSG_RESULT($enable_doxygen_docs)
1354 ### XML Documentation
1356 AC_PATH_PROG(XMLTO, xmlto, no)
1358 AC_MSG_CHECKING([whether to build XML documentation])
1360 if test x$XMLTO = xno ; then
1366 if test x$enable_xml_docs = xauto ; then
1367 if test x$have_xmlto = xno ; then
1374 if test x$enable_xml_docs = xyes; then
1375 if test x$have_xmlto = xno; then
1376 AC_MSG_ERROR([Building XML docs explicitly required, but xmlto not found])
1380 AM_CONDITIONAL(DBUS_XML_DOCS_ENABLED, test x$enable_xml_docs = xyes)
1381 AC_MSG_RESULT($enable_xml_docs)
1383 AC_PATH_PROG([MAN2HTML], [man2html])
1384 AC_ARG_VAR([MAN2HTML], [Path to man2html (optional)])
1385 AM_CONDITIONAL(DBUS_HAVE_MAN2HTML, test x$MAN2HTML != x)
1387 AM_CONDITIONAL(DBUS_CAN_UPLOAD_DOCS,
1388 test x$enable_doxygen_docs = xyes -a x$enable_xml_docs = xyes -a \
1391 #### Have to go $localstatedir->$prefix/var->/usr/local/var
1393 #### find the actual value for $prefix that we'll end up with
1394 ## (I know this is broken and should be done in the Makefile, but
1395 ## that's a major pain and almost nobody actually seems to care)
1396 AS_AC_EXPAND(EXPANDED_PREFIX, "$prefix")
1397 AS_AC_EXPAND(EXPANDED_LOCALSTATEDIR, "$localstatedir")
1398 AS_AC_EXPAND(EXPANDED_SYSCONFDIR, "$sysconfdir")
1399 AS_AC_EXPAND(EXPANDED_BINDIR, "$bindir")
1400 AS_AC_EXPAND(EXPANDED_LIBDIR, "$libdir")
1401 AS_AC_EXPAND(EXPANDED_LIBEXECDIR, "$libexecdir")
1402 AS_AC_EXPAND(EXPANDED_DATADIR, "$datadir")
1404 #### Check our operating system
1405 operating_system=unknown
1406 if test -f /etc/redhat-release || test -f $EXPANDED_SYSCONFDIR/redhat-release ; then
1407 operating_system=redhat
1410 if test -f /etc/slackware-version || test -f $EXPANDED_SYSCONFDIR/slackware-version ; then
1411 operating_system=slackware
1414 if test -f /usr/bin/cygwin1.dll || test -f $EXPANDED_BINDIR/cygwin1.dll ; then
1415 operating_system=cygwin
1418 #### Sort out init scripts
1420 if test x$with_init_scripts = x; then
1421 case x$operating_system in
1422 xredhat) with_init_scripts=redhat ;;
1423 xslackware) with_init_scripts=slackware ;;
1424 xcygwin) with_init_scripts=cygwin ;;
1425 *) with_init_scripts=none ;;
1429 AM_CONDITIONAL(DBUS_INIT_SCRIPTS_RED_HAT, test x$with_init_scripts = xredhat)
1430 AM_CONDITIONAL(DBUS_INIT_SCRIPTS_SLACKWARE, test x$with_init_scripts = xslackware)
1431 AM_CONDITIONAL(DBUS_INIT_SCRIPTS_CYGWIN, test x$with_init_scripts = xcygwin)
1433 ##### systemd unit files
1434 AC_ARG_WITH([systemdsystemunitdir],
1435 AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),
1436 [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)])
1437 if test "x$with_systemdsystemunitdir" != xno; then
1438 AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])
1440 AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ])
1442 ##### Set up location for system bus socket
1443 if ! test -z "$with_system_socket"; then
1444 DBUS_SYSTEM_SOCKET=$with_system_socket
1446 DBUS_SYSTEM_SOCKET=${EXPANDED_LOCALSTATEDIR}/run/dbus/system_bus_socket
1449 AC_SUBST(DBUS_SYSTEM_SOCKET)
1450 AC_DEFINE_UNQUOTED(DBUS_SYSTEM_SOCKET,"$DBUS_SYSTEM_SOCKET",[The name of the socket the system bus listens on by default])
1452 ## system bus only listens on local domain sockets, and never
1453 ## on an abstract socket (so only root can create the socket)
1454 DBUS_SYSTEM_BUS_DEFAULT_ADDRESS="unix:path=$DBUS_SYSTEM_SOCKET"
1455 AC_SUBST(DBUS_SYSTEM_BUS_DEFAULT_ADDRESS)
1456 AC_DEFINE_UNQUOTED(DBUS_SYSTEM_BUS_DEFAULT_ADDRESS, "$DBUS_SYSTEM_BUS_DEFAULT_ADDRESS",[The default D-Bus address of the system bus])
1458 #### Set up the pid file
1459 if ! test -z "$with_system_pid_file"; then
1460 DBUS_SYSTEM_PID_FILE=$with_system_pid_file
1461 elif test x$with_init_scripts = xredhat ; then
1462 DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/messagebus.pid
1464 DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/dbus/pid
1467 AC_SUBST(DBUS_SYSTEM_PID_FILE)
1469 #### Directory to check for console ownership
1470 if ! test -z "$with_console_auth_dir"; then
1471 DBUS_CONSOLE_AUTH_DIR=$with_console_auth_dir
1473 DBUS_CONSOLE_AUTH_DIR=/var/run/console/
1476 AC_SUBST(DBUS_CONSOLE_AUTH_DIR)
1477 AC_DEFINE_UNQUOTED(DBUS_CONSOLE_AUTH_DIR, "$DBUS_CONSOLE_AUTH_DIR", [Directory to check for console ownerhip])
1479 #### File to check for console ownership
1480 if test x$have_console_owner_file = xyes; then
1481 if ! test -z "$with_console_owner_file"; then
1482 DBUS_CONSOLE_OWNER_FILE=$with_console_owner_file
1484 DBUS_CONSOLE_OWNER_FILE=/dev/console
1487 DBUS_CONSOLE_OWNER_FILE=
1490 AC_SUBST(DBUS_CONSOLE_OWNER_FILE)
1491 AC_DEFINE_UNQUOTED(DBUS_CONSOLE_OWNER_FILE, "$DBUS_CONSOLE_OWNER_FILE", [File to check for console ownerhip])
1493 #### User to start the system bus as
1494 if test -z "$with_dbus_user" ; then
1495 DBUS_USER=messagebus
1497 DBUS_USER=$with_dbus_user
1500 AC_DEFINE_UNQUOTED(DBUS_USER,"$DBUS_USER", [User for running the system BUS daemon])
1502 #### Prefix to install into
1503 DBUS_PREFIX=$EXPANDED_PREFIX
1504 AC_SUBST(DBUS_PREFIX)
1505 AC_DEFINE_UNQUOTED(DBUS_PREFIX,"$DBUS_PREFIX", [Prefix for installing DBUS])
1507 #### Direcotry to install data files into
1508 DBUS_DATADIR=$EXPANDED_DATADIR
1509 AC_SUBST(DBUS_DATADIR)
1510 AC_DEFINE_UNQUOTED(DBUS_DATADIR,"$DBUS_DATADIR", [Directory for installing DBUS data files])
1512 #### Directory to install dbus-daemon
1513 if test -z "$with_dbus_daemondir" ; then
1514 DBUS_DAEMONDIR=$EXPANDED_BINDIR
1516 DBUS_DAEMONDIR=$with_dbus_daemondir
1518 AC_SUBST(DBUS_DAEMONDIR)
1519 AC_DEFINE_UNQUOTED(DBUS_DAEMONDIR,"$DBUS_DAEMONDIR", [Directory for installing the DBUS daemon])
1521 #### Directory to install the other binaries
1522 DBUS_BINDIR="$EXPANDED_BINDIR"
1523 AC_SUBST(DBUS_BINDIR)
1524 AC_DEFINE_UNQUOTED(DBUS_BINDIR,"$DBUS_BINDIR", [Directory for installing the binaries])
1526 #### Directory to install the libexec binaries
1527 DBUS_LIBEXECDIR="$EXPANDED_LIBEXECDIR"
1528 AC_SUBST(DBUS_LIBEXECDIR)
1529 AC_DEFINE_UNQUOTED(DBUS_LIBEXECDIR,"$DBUS_LIBEXECDIR", [Directory for installing the libexec binaries])
1531 #### Tell tests where to find certain stuff in builddir
1534 # Useful in a cross-compilation environment, where the tests are run on the host system.
1535 AC_ARG_WITH(dbus-test-dir, AS_HELP_STRING([--with-dbus-test-dir=[dirname]],[path where the tests tools are available]),
1537 AC_DEFUN([TEST_PATH], [
1538 TEST_$1=${DBUS_PWD}/test/$2
1539 AC_DEFINE_UNQUOTED(TEST_$1, "$TEST_$1",
1540 [Full path to test file test/$2 in builddir])
1543 AC_DEFUN([TEST_PROG], [
1544 TEST_$1=${DBUS_PWD}/test/$2
1545 AC_DEFINE_UNQUOTED(TEST_$1, "$TEST_$1$EXEEXT",
1546 [Full path to test file test/$2 in builddir])
1550 TEST_PATH(VALID_SERVICE_DIR, data/valid-service-files)
1551 TEST_PATH(INVALID_SERVICE_DIR, data/invalid-service-files)
1552 TEST_PATH(VALID_SERVICE_SYSTEM_DIR, data/valid-service-files-system)
1553 TEST_PATH(INVALID_SERVICE_SYSTEM_DIR, data/invalid-service-files-system)
1554 TEST_PROG(SERVICE_BINARY, test-service)
1555 TEST_PROG(SHELL_SERVICE_BINARY, test-shell-service)
1556 TEST_PROG(EXIT_BINARY, test-exit)
1557 TEST_PROG(SEGFAULT_BINARY, test-segfault)
1558 TEST_PROG(SLEEP_FOREVER_BINARY, test-sleep-forever)
1559 TEST_PROG(PRIVSERVER_BINARY, name-test/test-privserver)
1561 AC_DEFINE_UNQUOTED(TEST_BUS_BINARY, "$DBUS_PWD/bus/dbus-daemon$EXEEXT",
1562 [Full path to the daemon in the builddir])
1563 AC_SUBST(TEST_BUS_BINARY)
1565 ## Export the non-setuid external helper
1566 TEST_LAUNCH_HELPER_BINARY="$DBUS_PWD/bus/dbus-daemon-launch-helper-test$EXEEXT"
1567 AC_SUBST(TEST_LAUNCH_HELPER_BINARY)
1568 AC_DEFINE_UNQUOTED(DBUS_TEST_LAUNCH_HELPER_BINARY, "$TEST_LAUNCH_HELPER_BINARY",
1569 [Full path to the launch helper test program in the builddir])
1571 #### Find socket directories
1572 if ! test -z "$TMPDIR" ; then
1573 DEFAULT_SOCKET_DIR=$TMPDIR
1574 elif ! test -z "$TEMP" ; then
1575 DEFAULT_SOCKET_DIR=$TEMP
1576 elif ! test -z "$TMP" ; then
1577 DEFAULT_SOCKET_DIR=$TMP
1579 DEFAULT_SOCKET_DIR=/tmp
1582 DEFAULT_SOCKET_DIR=`echo $DEFAULT_SOCKET_DIR | sed 's/+/%2B/g'`
1584 if ! test -z "$with_test_socket_dir" ; then
1585 TEST_SOCKET_DIR="$with_test_socket_dir"
1587 TEST_SOCKET_DIR=$DEFAULT_SOCKET_DIR
1589 AC_SUBST(TEST_SOCKET_DIR)
1590 AC_DEFINE_UNQUOTED(DBUS_TEST_SOCKET_DIR, "$TEST_SOCKET_DIR", [Where to put test sockets])
1592 if ! test -z "$with_session_socket_dir" ; then
1593 DBUS_SESSION_SOCKET_DIR="$with_session_socket_dir"
1595 DBUS_SESSION_SOCKET_DIR=$DEFAULT_SOCKET_DIR
1597 AC_DEFINE_UNQUOTED(DBUS_SESSION_SOCKET_DIR, "$DBUS_SESSION_SOCKET_DIR", [Where per-session bus puts its sockets])
1598 AC_SUBST(DBUS_SESSION_SOCKET_DIR)
1600 if test x$dbus_win = xyes; then
1601 DBUS_SESSION_BUS_DEFAULT_ADDRESS="nonce-tcp:"
1602 elif test x$have_launchd = xyes; then
1603 DBUS_SESSION_BUS_DEFAULT_ADDRESS="launchd:env=DBUS_LAUNCHD_SESSION_BUS_SOCKET"
1605 DBUS_SESSION_BUS_DEFAULT_ADDRESS="unix:tmpdir=$DBUS_SESSION_SOCKET_DIR"
1607 AC_SUBST(DBUS_SESSION_BUS_DEFAULT_ADDRESS)
1609 # darwin needs this to initialize the environment
1610 AC_CHECK_HEADERS(crt_externs.h)
1611 AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])])
1612 AH_VERBATIM(_DARWIN_ENVIRON,
1614 #if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
1615 # include <sys/time.h>
1616 # include <crt_externs.h>
1617 # define environ (*_NSGetEnviron())
1624 dbus/dbus-arch-deps.h
1628 bus/messagebus-config
1629 bus/org.freedesktop.dbus-session.plist
1638 test/name-test/Makefile
1642 test/data/valid-config-files/debug-allow-all.conf
1643 test/data/valid-config-files/debug-allow-all-sha1.conf
1644 test/data/valid-config-files-system/debug-allow-all-pass.conf
1645 test/data/valid-config-files-system/debug-allow-all-fail.conf
1646 test/data/valid-service-files/org.freedesktop.DBus.TestSuite.PrivServer.service
1647 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service
1648 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteForkingEchoService.service
1649 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service
1650 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service
1651 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service
1652 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service
1653 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service
1654 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service
1655 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service
1656 test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service
1657 test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service
1658 test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service
1661 dnl ==========================================================================
1666 prefix: ${EXPANDED_PREFIX}
1667 exec_prefix: ${exec_prefix}
1668 libdir: ${EXPANDED_LIBDIR}
1669 libexecdir: ${EXPANDED_LIBEXECDIR}
1670 bindir: ${EXPANDED_BINDIR}
1671 sysconfdir: ${EXPANDED_SYSCONFDIR}
1672 localstatedir: ${EXPANDED_LOCALSTATEDIR}
1673 datadir: ${EXPANDED_DATADIR}
1674 source code location: ${srcdir}
1677 cppflags: ${CPPFLAGS}
1678 cxxflags: ${CXXFLAGS}
1679 64-bit int: ${DBUS_INT64_TYPE}
1680 32-bit int: ${DBUS_INT32_TYPE}
1681 16-bit int: ${DBUS_INT16_TYPE}
1682 Doxygen: ${DOXYGEN:-not found}
1683 xmlto: ${XMLTO:-not found}
1684 man2html: ${MAN2HTML:-not found}"
1687 Maintainer mode: ${USE_MAINTAINER_MODE}
1688 gcc coverage profiling: ${enable_gcov}
1689 Building unit tests: ${enable_tests}
1690 Building verbose mode: ${enable_verbose_mode}
1691 Building assertions: ${enable_asserts}
1692 Building checks: ${enable_checks}
1693 Building SELinux support: ${have_selinux}
1694 Building inotify support: ${have_inotify}
1695 Building dnotify support: ${have_dnotify}
1696 Building kqueue support: ${have_kqueue}
1697 Building X11 code: ${enable_x11}
1698 Building Doxygen docs: ${enable_doxygen_docs}
1699 Building XML docs: ${enable_xml_docs}
1700 Building cache support: ${enable_userdb_cache}
1701 Building launchd support: ${have_launchd}
1702 Using XML parser: ${with_xml}
1703 Init scripts style: ${with_init_scripts}
1704 Abstract socket names: ${ac_cv_have_abstract_sockets}
1705 System bus socket: ${DBUS_SYSTEM_SOCKET}
1706 System bus address: ${DBUS_SYSTEM_BUS_DEFAULT_ADDRESS}
1707 System bus PID file: ${DBUS_SYSTEM_PID_FILE}
1708 Session bus address: ${DBUS_SESSION_BUS_DEFAULT_ADDRESS}
1709 Console auth dir: ${DBUS_CONSOLE_AUTH_DIR}
1710 Console owner file: ${have_console_owner_file}
1711 Console owner file path: ${DBUS_CONSOLE_OWNER_FILE}
1712 System bus user: ${DBUS_USER}
1713 Session bus services dir: ${EXPANDED_DATADIR}/dbus-1/services
1714 'make check' socket dir: ${TEST_SOCKET_DIR}
1716 if test x$have_launchd = xyes; then
1717 echo " launchd agent dir: ${LAUNCHD_AGENT_DIR}"
1721 if test x$enable_tests = xyes; then
1722 echo "NOTE: building with unit tests increases the size of the installed library and renders it insecure."
1724 if test x$enable_tests = xyes -a x$enable_asserts = xno; then
1725 echo "NOTE: building with unit tests but without assertions means tests may not properly report failures (this configuration is only useful when doing something like profiling the tests)"
1727 if test x$enable_gcov = xyes; then
1728 echo "NOTE: building with coverage profiling is definitely for developers only."
1730 if test x$enable_verbose_mode = xyes; then
1731 echo "NOTE: building with verbose mode increases library size, may slightly increase security risk, and decreases performance."
1733 if test x$enable_asserts = xyes; then
1734 echo "NOTE: building with assertions increases library size and decreases performance."
1736 if test x$enable_checks = xno; then
1737 echo "NOTE: building without checks for arguments passed to public API makes it harder to debug apps using D-Bus, but will slightly decrease D-Bus library size and _very_ slightly improve performance."
1739 if test x$dbus_use_libxml = xtrue; then
1741 echo "WARNING: You have chosen to use libxml as your xml parser however this code path is not maintained by the D-Bus developers and if it breaks you get to keep the pieces. If you have selected this option in err please reconfigure with expat (e.g. --with-xml=expat)."