4 m4_define([dbus_major_version], [1])
5 m4_define([dbus_minor_version], [4])
6 m4_define([dbus_micro_version], [7])
7 m4_define([dbus_version],
8 [dbus_major_version.dbus_minor_version.dbus_micro_version])
9 AC_INIT(dbus, [dbus_version])
15 AC_CONFIG_MACRO_DIR([m4])
17 AM_INIT_AUTOMAKE([1.9 tar-ustar -Wno-portability])
18 AM_CONFIG_HEADER(config.h)
21 ACLOCAL="$ACLOCAL $ACLOCAL_FLAGS"
23 GETTEXT_PACKAGE=dbus-1
24 AC_SUBST(GETTEXT_PACKAGE)
25 AC_DEFINE_UNQUOTED(GETTEXT_PACKAGE,"$GETTEXT_PACKAGE",[The name of the gettext domain])
27 ## must come before we use the $USE_MAINTAINER_MODE variable later
30 m4_ifdef([AM_SILENT_RULES],[AM_SILENT_RULES([yes])])
32 AC_DEFINE_UNQUOTED(DBUS_DAEMON_NAME,"dbus-daemon",[Name of executable])
34 # libtool versioning - this applies to libdbus
36 # See http://sources.redhat.com/autobook/autobook/autobook_91.html#SEC91 for details
39 ## increment if the interface has additions, changes, removals.
42 ## increment any time the source changes; set to
43 ## 0 if you increment CURRENT
46 ## increment if any interfaces have been added; set to 0
47 ## if any interfaces have been changed or removed. removal has
48 ## precedence over adding, so set to 0 if both happened.
55 DBUS_MAJOR_VERSION=dbus_major_version
56 DBUS_MINOR_VERSION=dbus_minor_version
57 DBUS_MICRO_VERSION=dbus_micro_version
58 DBUS_VERSION=dbus_major_version.dbus_minor_version.dbus_micro_version
60 AC_SUBST(DBUS_MAJOR_VERSION)
61 AC_SUBST(DBUS_MINOR_VERSION)
62 AC_SUBST(DBUS_MICRO_VERSION)
63 AC_SUBST(DBUS_VERSION)
68 AC_USE_SYSTEM_EXTENSIONS
75 COMPILER_OPTIMISATIONS
77 # Set some internal variables depending on the platform for later use.
98 # Special defines for certain platforms
99 if test "$dbus_win" = yes; then
100 AC_DEFINE(DBUS_WIN,1,[Defined if we run on a W32 API based system])
101 BUILD_TIMESTAMP=`date --iso-8601=minutes`
102 AC_SUBST(BUILD_TIMESTAMP)
103 # Assume DBUS_VERSION is always three numbers
104 BUILD_FILEVERSION=`echo "$DBUS_VERSION" | sed -e 's/\./,/g'`,0
105 AC_SUBST(BUILD_FILEVERSION)
106 AC_CHECK_TOOL(WINDRES, windres, no)
107 if test "$WINDRES" = no; then
108 AC_MSG_ERROR([*** Could not find an implementation of windres in your PATH.])
110 if test "$dbus_wince" = yes; then
111 AC_DEFINE(DBUS_WINCE,1,[Defined if we run on a W32 CE API based system])
112 AC_DEFINE(_WIN32_WCE, 0x0502, [Defined to get newer W32 CE APIs])
115 AC_DEFINE(DBUS_UNIX,1,[Defined if we run on a Unix-based system])
117 if test "$dbus_cygwin" = yes; then
118 AC_DEFINE(DBUS_CYGWIN,1,[Defined if we run on a cygwin API based system])
121 AM_CONDITIONAL(DBUS_WIN, test "$dbus_win" = yes)
122 AM_CONDITIONAL(DBUS_WINCE, test "$dbus_wince" = yes)
123 AM_CONDITIONAL(DBUS_UNIX, test "$dbus_unix" = yes)
124 AM_CONDITIONAL(DBUS_CYGWIN, test "$dbus_cygwin" = yes)
126 AC_ARG_ENABLE(tests, AS_HELP_STRING([--enable-tests],[enable unit test code in the library and binaries]),enable_tests=$enableval,enable_tests=$USE_MAINTAINER_MODE)
127 AC_ARG_ENABLE(ansi, AS_HELP_STRING([--enable-ansi],[enable -ansi -pedantic gcc flags]),enable_ansi=$enableval,enable_ansi=no)
128 AC_ARG_ENABLE(verbose-mode, AS_HELP_STRING([--enable-verbose-mode],[support verbose debug mode]),enable_verbose_mode=$enableval,enable_verbose_mode=$USE_MAINTAINER_MODE)
129 AC_ARG_ENABLE(asserts, AS_HELP_STRING([--enable-asserts],[include assertion checks]),enable_asserts=$enableval,enable_asserts=$USE_MAINTAINER_MODE)
130 AC_ARG_ENABLE(checks, AS_HELP_STRING([--enable-checks],[include sanity checks on public API]),enable_checks=$enableval,enable_checks=yes)
131 AC_ARG_ENABLE(xml-docs, AS_HELP_STRING([--enable-xml-docs],[build XML documentation (requires xmlto)]),enable_xml_docs=$enableval,enable_xml_docs=auto)
132 AC_ARG_ENABLE(doxygen-docs, AS_HELP_STRING([--enable-doxygen-docs],[build DOXYGEN documentation (requires Doxygen)]),enable_doxygen_docs=$enableval,enable_doxygen_docs=auto)
133 AC_ARG_ENABLE(abstract-sockets, AS_HELP_STRING([--enable-abstract-sockets],[use abstract socket namespace (linux only)]),enable_abstract_sockets=$enableval,enable_abstract_sockets=auto)
134 AC_ARG_ENABLE(selinux, AS_HELP_STRING([--enable-selinux],[build with SELinux support]),enable_selinux=$enableval,enable_selinux=auto)
135 AC_ARG_ENABLE(libaudit,AS_HELP_STRING([--enable-libaudit],[build audit daemon support for SELinux]),enable_libaudit=$enableval,enable_libaudit=auto)
136 AC_ARG_ENABLE(dnotify, AS_HELP_STRING([--enable-dnotify],[build with dnotify support (linux only)]),enable_dnotify=$enableval,enable_dnotify=auto)
137 AC_ARG_ENABLE(inotify, AS_HELP_STRING([--enable-inotify],[build with inotify support (linux only)]),enable_inotify=$enableval,enable_inotify=auto)
138 AC_ARG_ENABLE(kqueue, AS_HELP_STRING([--enable-kqueue],[build with kqueue support]),enable_kqueue=$enableval,enable_kqueue=auto)
139 AC_ARG_ENABLE(console-owner-file, AS_HELP_STRING([--enable-console-owner-file],[enable console owner file]),enable_console_owner_file=$enableval,enable_console_owner_file=auto)
140 AC_ARG_ENABLE(userdb-cache, AS_HELP_STRING([--enable-userdb-cache],[build with userdb-cache support]),enable_userdb_cache=$enableval,enable_userdb_cache=yes)
141 AC_ARG_ENABLE(launchd, AS_HELP_STRING([--enable-launchd],[build with launchd auto-launch support]),enable_launchd=$enableval,enable_launchd=auto)
143 AC_ARG_WITH(xml, AS_HELP_STRING([--with-xml=[libxml/expat]],[XML library to use (libxml may be named libxml2 on some systems)]))
144 AC_ARG_WITH(init-scripts, AS_HELP_STRING([--with-init-scripts=[redhat]],[Style of init scripts to install]))
145 AC_ARG_WITH(session-socket-dir, AS_HELP_STRING([--with-session-socket-dir=[dirname]],[Where to put sockets for the per-login-session message bus]))
146 AC_ARG_WITH(test-socket-dir, AS_HELP_STRING([--with-test-socket-dir=[dirname]],[Where to put sockets for make check]))
147 AC_ARG_WITH(system-pid-file, AS_HELP_STRING([--with-system-pid-file=[pidfile]],[PID file for systemwide daemon]))
148 AC_ARG_WITH(system-socket, AS_HELP_STRING([--with-system-socket=[filename]],[UNIX domain socket for systemwide daemon]))
149 AC_ARG_WITH(console-auth-dir, AS_HELP_STRING([--with-console-auth-dir=[dirname]],[directory to check for console ownerhip]))
150 AC_ARG_WITH(console-owner-file, AS_HELP_STRING([--with-console-owner-file=[filename]],[file whose owner determines current console owner]))
151 AC_ARG_WITH(launchd-agent-dir, AS_HELP_STRING([--with-launchd-agent-dir=[dirname]],[directory to put the launchd agent (default: /Library/LaunchAgents)]))
152 AC_ARG_WITH(dbus_user, AS_HELP_STRING([--with-dbus-user=<user>],[User for running the DBUS daemon (messagebus)]))
153 AC_ARG_WITH(dbus_daemondir, AS_HELP_STRING([--with-dbus-daemondir=[dirname]],[Directory for installing the DBUS daemon]))
155 dnl DBUS_BUILD_TESTS controls unit tests built in to .c files
156 dnl and also some stuff in the test/ subdir
157 AM_CONDITIONAL(DBUS_BUILD_TESTS, test x$enable_tests = xyes)
158 if test x$enable_tests = xyes; then
159 AC_DEFINE(DBUS_BUILD_TESTS,1,[Build test code])
162 if test x$enable_verbose_mode = xyes; then
163 AC_DEFINE(DBUS_ENABLE_VERBOSE_MODE,1,[Support a verbose mode])
166 if test x$enable_asserts = xno; then
167 AC_DEFINE(DBUS_DISABLE_ASSERT,1,[Disable assertion checking])
168 AC_DEFINE(G_DISABLE_ASSERT,1,[Disable GLib assertion macros])
171 # -rdynamic is needed for glibc's backtrace_symbols to work.
172 # No clue how much overhead this adds, but it's useful
173 # to do this on any assertion failure,
174 # so for now it's enabled anytime asserts are (currently not
175 # in production builds).
177 # To get -rdynamic you pass -export-dynamic to libtool.
178 AC_DEFINE(DBUS_BUILT_R_DYNAMIC,1,[whether -export-dynamic was passed to libtool])
179 R_DYNAMIC_LDFLAG=-export-dynamic
181 AC_SUBST(R_DYNAMIC_LDFLAG)
183 if test x$enable_checks = xno; then
184 AC_DEFINE(DBUS_DISABLE_CHECKS,1,[Disable public API sanity checking])
185 AC_DEFINE(G_DISABLE_CHECKS,1,[Disable GLib public API sanity checking])
188 if test x$enable_userdb_cache = xyes; then
189 AC_DEFINE(DBUS_ENABLE_USERDB_CACHE,1,[Build with caching of user data])
192 if test x$enable_compiler_coverage = xyes; then
193 ## so that config.h changes when you toggle gcov support
194 AC_DEFINE_UNQUOTED(DBUS_GCOV_ENABLED, 1, [Defined if gcov is enabled to force a rebuild due to config.h changing])
197 # glibc21.m4 serial 3
198 dnl Copyright (C) 2000-2002, 2004 Free Software Foundation, Inc.
199 dnl This file is free software; the Free Software Foundation
200 dnl gives unlimited permission to copy and/or distribute it,
201 dnl with or without modifications, as long as this notice is preserved.
203 # Test for the GNU C Library, version 2.1 or newer.
206 AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
207 ac_cv_gnu_library_2_1,
208 [AC_EGREP_CPP([Lucky GNU user],
210 #include <features.h>
211 #ifdef __GNU_LIBRARY__
212 #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
217 ac_cv_gnu_library_2_1=yes,
218 ac_cv_gnu_library_2_1=no)
224 AC_CHECK_SIZEOF(char)
225 AC_CHECK_SIZEOF(short)
226 AC_CHECK_SIZEOF(long)
228 AC_CHECK_SIZEOF(void *)
229 AC_CHECK_SIZEOF(long long)
230 AC_CHECK_SIZEOF(__int64)
232 ### See what our 64 bit type is called
233 AC_MSG_CHECKING([64-bit integer type])
238 dbusint64_constant='(val)'
239 dbusuint64_constant='(val)'
240 dbusint64_printf_modifier='""'
244 dbusint64_constant='(val##L)'
245 dbusuint64_constant='(val##UL)'
246 dbusint64_printf_modifier='"l"'
248 $ac_cv_sizeof_long_long)
249 dbusint64='long long'
250 dbusint64_constant='(val##LL)'
251 dbusuint64_constant='(val##ULL)'
252 # Ideally we discover what the format is, but this is
253 # only used in verbose mode, so eh...
254 if test x"$ac_cv_gnu_library_2_1" = xyes; then
255 dbusint64_printf_modifier='"ll"'
258 $ac_cv_sizeof___int64)
260 dbusint64_constant='(val##i64)'
261 dbusuint64_constant='(val##ui64)'
263 if test x"$ac_cv_gnu_library_2_1" = xyes; then
264 dbusint64_printf_modifier='"ll"'
269 if test -z "$dbusint64" ; then
270 DBUS_INT64_TYPE="no_int64_type_detected"
273 DBUS_UINT64_CONSTANT=
274 AC_MSG_RESULT([none found])
276 DBUS_INT64_TYPE="$dbusint64"
278 DBUS_INT64_CONSTANT="$dbusint64_constant"
279 DBUS_UINT64_CONSTANT="$dbusuint64_constant"
280 if test x"$dbusint64_printf_modifier" != x; then
281 AC_DEFINE_UNQUOTED(DBUS_INT64_PRINTF_MODIFIER, [$dbusint64_printf_modifier], [Define to printf modifier for 64 bit integer type])
283 AC_MSG_RESULT($DBUS_INT64_TYPE)
286 AC_SUBST(DBUS_INT64_TYPE)
287 AC_SUBST(DBUS_INT64_CONSTANT)
288 AC_SUBST(DBUS_UINT64_CONSTANT)
289 AC_SUBST(DBUS_HAVE_INT64)
291 ### see what 32-bit int is called
292 AC_MSG_CHECKING([32-bit integer type])
306 if test -z "$dbusint32" ; then
307 DBUS_INT32_TYPE="no_int32_type_detected"
308 AC_MSG_ERROR([No 32-bit integer type found])
310 DBUS_INT32_TYPE="$dbusint32"
311 AC_MSG_RESULT($DBUS_INT32_TYPE)
314 AC_SUBST(DBUS_INT32_TYPE)
316 ### see what 16-bit int is called
317 AC_MSG_CHECKING([16-bit integer type])
328 if test -z "$dbusint16" ; then
329 DBUS_INT16_TYPE="no_int16_type_detected"
330 AC_MSG_ERROR([No 16-bit integer type found])
332 DBUS_INT16_TYPE="$dbusint16"
333 AC_MSG_RESULT($DBUS_INT16_TYPE)
336 AC_SUBST(DBUS_INT16_TYPE)
341 # check at compile-time, so that it is possible to build universal
342 # (with multiple architectures at once on the compile line)
343 AH_VERBATIM([WORDS_BIGENDIAN_DARWIN], [
344 /* Use the compiler-provided endianness defines to allow universal compiling. */
345 #if defined(__BIG_ENDIAN__)
346 #define WORDS_BIGENDIAN 1
355 dnl **********************************
356 dnl *** va_copy checks (from GLib) ***
357 dnl **********************************
358 dnl we currently check for all three va_copy possibilities, so we get
359 dnl all results in config.log for bug reports.
360 AC_CACHE_CHECK([for an implementation of va_copy()],dbus_cv_va_copy,[
361 AC_LINK_IFELSE([#include <stdarg.h>
363 static void f (int i, ...) {
364 va_list args1, args2;
366 va_copy (args2, args1);
367 if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
369 va_end (args1); va_end (args2);
375 [dbus_cv_va_copy=yes],
376 [dbus_cv_va_copy=no])
378 AC_CACHE_CHECK([for an implementation of __va_copy()],dbus_cv___va_copy,[
379 AC_LINK_IFELSE([#include <stdarg.h>
381 static void f (int i, ...) {
382 va_list args1, args2;
384 __va_copy (args2, args1);
385 if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
387 va_end (args1); va_end (args2);
393 [dbus_cv___va_copy=yes],
394 [dbus_cv___va_copy=no])
397 if test "x$dbus_cv_va_copy" = "xyes"; then
398 dbus_va_copy_func=va_copy
399 else if test "x$dbus_cv___va_copy" = "xyes"; then
400 dbus_va_copy_func=__va_copy
404 if test -n "$dbus_va_copy_func"; then
405 AC_DEFINE_UNQUOTED(DBUS_VA_COPY,$dbus_va_copy_func,[A 'va_copy' style function])
409 AC_CACHE_CHECK([whether va_lists can be copied by value],
411 [AC_RUN_IFELSE([AC_LANG_PROGRAM(
417 static void f (int i, ...) {
418 va_list args1, args2;
421 if (va_arg (args2, int) != 42 || va_arg (args1, int) != 42)
423 va_end (args1); va_end (args2);
430 [dbus_cv_va_val_copy=yes],
431 [dbus_cv_va_val_copy=no],
432 [dbus_cv_va_val_copy=yes])
436 if test "x$dbus_cv_va_val_copy" = "xno"; then
437 AC_DEFINE(DBUS_VA_COPY_AS_ARRAY,1, ['va_lists' cannot be copies as values])
443 AC_CACHE_CHECK([whether $CC knows __sync_sub_and_fetch()],
444 dbus_cv_sync_sub_and_fetch,
446 AC_LANG_PROGRAM([], [[int a = 4; int b = __sync_sub_and_fetch(&a, 4); exit(b); ]]),
447 [dbus_cv_sync_sub_and_fetch=yes],
448 [dbus_cv_sync_sub_and_fetch=no])
451 if test "x$dbus_cv_sync_sub_and_fetch" = "xyes" ; then
457 AC_DEFINE_UNQUOTED([DBUS_USE_SYNC], [$have_sync], [Use the gcc __sync extension])
459 #### Various functions
460 AC_SEARCH_LIBS(socket,[socket network])
461 AC_CHECK_FUNC(gethostbyname,,[AC_CHECK_LIB(nsl,gethostbyname)])
463 AC_CHECK_FUNCS(vsnprintf vasprintf nanosleep usleep setenv clearenv unsetenv socketpair getgrouplist fpathconf setrlimit poll setlocale localeconv strtoll strtoull)
465 #### Check for broken poll; taken from Glib's configure
467 AC_MSG_CHECKING([for broken poll])
468 AC_RUN_IFELSE([AC_LANG_SOURCE([[
472 #ifdef HAVE_SYS_POLL_H
473 #include <sys/poll.h>
476 struct pollfd fds[1];
478 fd = open("/dev/null", 1);
480 fds[0].events = POLLIN;
482 if (poll(fds, 1, 0) < 0 || (fds[0].revents & POLLNVAL) != 0) {
483 exit(1); /* Does not work for devices -- fail */
489 AC_DEFINE(BROKEN_POLL,1,[poll doesn't work on devices])],
490 [broken_poll="no (cross compiling)"])
491 AC_MSG_RESULT($broken_poll)
493 AC_MSG_CHECKING(for dirfd)
494 AC_LINK_IFELSE([AC_LANG_PROGRAM([[
495 #include <sys/types.h>
503 [dbus_have_dirfd=yes],
504 [dbus_have_dirfd=no])
505 AC_MSG_RESULT($dbus_have_dirfd)
506 if test "$dbus_have_dirfd" = yes; then
507 AC_DEFINE(HAVE_DIRFD,1,[Have dirfd function])
509 AC_MSG_CHECKING(for DIR *dirp->dd_fd)
510 AC_LINK_IFELSE([AC_LANG_PROGRAM([[
511 #include <sys/types.h>
520 [dbus_have_ddfd=yes],
522 AC_MSG_RESULT($dbus_have_ddfd)
523 if test "$dbus_have_ddfd" = yes; then
524 AC_DEFINE(HAVE_DDFD,1,[Have the ddfd member of DIR])
528 AC_CHECK_HEADERS(sys/resource.h)
530 AC_CHECK_HEADERS(dirent.h)
532 AC_CHECK_HEADERS(execinfo.h, [AC_CHECK_FUNCS(backtrace)])
534 AC_CHECK_HEADERS(errno.h)
536 AC_CHECK_HEADERS(signal.h)
538 AC_CHECK_HEADERS(locale.h)
540 AC_CHECK_HEADERS(byteswap.h)
542 AC_CHECK_HEADERS(unistd.h)
544 AC_CHECK_HEADERS(ws2tcpip.h)
546 AC_CHECK_HEADERS(wspiapi.h)
548 # Add -D_POSIX_PTHREAD_SEMANTICS if on Solaris
552 CFLAGS="$CFLAGS -D_POSIX_PTHREAD_SEMANTICS" ;;
555 # checking for a posix version of getpwnam_r
556 # if we are cross compiling and can not run the test
557 # assume getpwnam_r is the posix version
558 # it is up to the person cross compiling to change
559 # this behavior if desired
561 AC_CACHE_CHECK([for posix getpwnam_r],
562 ac_cv_func_posix_getpwnam_r,
563 [AC_RUN_IFELSE([AC_LANG_PROGRAM(
570 struct passwd pwd, *pwptr = &pwd;
573 error = getpwnam_r ("", &pwd, buffer,
574 sizeof (buffer), &pwptr);
575 return (error < 0 && errno == ENOSYS)
578 [ac_cv_func_posix_getpwnam_r=yes],
579 [ac_cv_func_posix_getpwnam_r=no],
580 [ac_cv_func_posix_getpwnam_r=yes]
584 if test "$ac_cv_func_posix_getpwnam_r" = yes; then
585 AC_DEFINE(HAVE_POSIX_GETPWNAM_R,1,
586 [Have POSIX function getpwnam_r])
588 AC_CACHE_CHECK([for nonposix getpwnam_r],
589 ac_cv_func_nonposix_getpwnam_r,
590 [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <pwd.h>]], [[char buffer[10000];
592 getpwnam_r ("", &pwd, buffer,
593 sizeof (buffer));]])],
594 [ac_cv_func_nonposix_getpwnam_r=yes],
595 [ac_cv_func_nonposix_getpwnam_r=no])])
596 if test "$ac_cv_func_nonposix_getpwnam_r" = yes; then
597 AC_DEFINE(HAVE_NONPOSIX_GETPWNAM_R,1,
598 [Have non-POSIX function getpwnam_r])
602 dnl check for socklen_t
603 AC_MSG_CHECKING(whether socklen_t is defined)
604 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
605 #include <sys/types.h>
606 #include <sys/socket.h>
612 [dbus_have_socklen_t=yes],
613 [dbus_have_socklen_t=no])
614 AC_MSG_RESULT($dbus_have_socklen_t)
616 if test "x$dbus_have_socklen_t" = "xyes"; then
617 AC_DEFINE(HAVE_SOCKLEN_T,1,[Have socklen_t type])
620 dnl check for writev header and writev function so we're
621 dnl good to go if HAVE_WRITEV gets defined.
622 AC_CHECK_HEADERS(sys/uio.h, [AC_CHECK_FUNCS(writev)])
624 dnl needed on darwin for NAME_MAX
625 AC_CHECK_HEADERS(sys/syslimits.h)
627 dnl Make it easy to check if we have MSG_NOSIGNAL without actually having to include sys/socket.h
628 AC_CHECK_DECLS([MSG_NOSIGNAL], [], [], [[ #include <sys/socket.h> ]])
630 dnl check for flavours of varargs macros (test from GLib)
631 AC_MSG_CHECKING(for ISO C99 varargs macros in C)
632 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
633 int a(int p1, int p2, int p3);
634 #define call_a(...) a(1,__VA_ARGS__)
637 [dbus_have_iso_c_varargs=yes],
638 [dbus_have_iso_c_varargs=no])
639 AC_MSG_RESULT($dbus_have_iso_c_varargs)
641 AC_MSG_CHECKING(for GNUC varargs macros)
642 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]], [[
643 int a(int p1, int p2, int p3);
644 #define call_a(params...) a(1,params)
647 [dbus_have_gnuc_varargs=yes],
648 [dbus_have_gnuc_varargs=no])
649 AC_MSG_RESULT($dbus_have_gnuc_varargs)
651 dnl Output varargs tests
652 if test x$dbus_have_iso_c_varargs = xyes; then
653 AC_DEFINE(HAVE_ISO_VARARGS,1,[Have ISO C99 varargs macros])
655 if test x$dbus_have_gnuc_varargs = xyes; then
656 AC_DEFINE(HAVE_GNUC_VARARGS,1,[Have GNU-style varargs macros])
659 dnl Check for various credentials.
660 AC_MSG_CHECKING(for struct cmsgcred)
661 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
662 #include <sys/types.h>
663 #include <sys/socket.h>
665 struct cmsgcred cred;
669 [dbus_have_struct_cmsgcred=yes],
670 [dbus_have_struct_cmsgcred=no])
671 AC_MSG_RESULT($dbus_have_struct_cmsgcred)
673 if test x$dbus_have_struct_cmsgcred = xyes; then
674 AC_DEFINE(HAVE_CMSGCRED,1,[Have cmsgcred structure])
677 AC_CHECK_FUNCS(getpeerucred getpeereid)
679 AC_CHECK_FUNCS(pipe2 accept4)
681 #### Abstract sockets
683 if test x$enable_abstract_sockets = xauto; then
686 AC_CACHE_CHECK([abstract socket namespace],
687 ac_cv_have_abstract_sockets,
688 [AC_RUN_IFELSE([AC_LANG_PROGRAM(
690 #include <sys/types.h>
694 #include <sys/socket.h>
701 struct sockaddr_un addr;
703 listen_fd = socket (PF_UNIX, SOCK_STREAM, 0);
707 fprintf (stderr, "socket() failed: %s\n", strerror (errno));
711 memset (&addr, '\0', sizeof (addr));
712 addr.sun_family = AF_UNIX;
713 strcpy (addr.sun_path, "X/tmp/dbus-fake-socket-path-used-in-configure-test");
714 /* SUN_LEN uses strlen() so need to calculate it before adding \0 at the
717 slen = SUN_LEN(&addr);
718 addr.sun_path[0] = '\0'; /* this is what makes it abstract */
720 if (bind (listen_fd, (struct sockaddr*) &addr, slen) < 0)
722 fprintf (stderr, "Abstract socket namespace bind() failed: %s\n",
729 [ac_cv_have_abstract_sockets=yes],
730 [ac_cv_have_abstract_sockets=no],
732 ac_cv_have_abstract_sockets=no
736 if test x$warn_on_xcompile = xyes ; then
737 AC_MSG_WARN([Cannot check for abstract sockets when cross-compiling, please use --enable-abstract-sockets])
742 if test x$enable_abstract_sockets = xyes; then
743 if test x$ac_cv_have_abstract_sockets = xno; then
744 AC_MSG_ERROR([Abstract sockets explicitly required, and support not detected.])
748 if test x$enable_abstract_sockets = xno; then
749 ac_cv_have_abstract_sockets=no;
752 if test x$ac_cv_have_abstract_sockets = xyes ; then
753 DBUS_PATH_OR_ABSTRACT=abstract
754 AC_DEFINE(HAVE_ABSTRACT_SOCKETS,1,[Have abstract socket namespace])
756 DBUS_PATH_OR_ABSTRACT=path
759 # this is used in addresses to prefer abstract, e.g.
760 # unix:path=/foo or unix:abstract=/foo
761 AC_SUBST(DBUS_PATH_OR_ABSTRACT)
765 #### Sort out XML library
768 AC_CHECK_LIB(expat, XML_ParserCreate_MM,
769 [ AC_CHECK_HEADERS(expat.h, have_expat=true, have_expat=false) ],
772 # see what we want to use
773 dbus_use_libxml=false
775 if test x$with_xml = xexpat; then
776 if ! $have_expat ; then
777 AC_MSG_ERROR([Explicitly requested expat but expat not found])
780 elif test x$with_xml = xlibxml; then
781 PKG_CHECK_MODULES(LIBXML, libxml-2.0 >= 2.6.0, have_libxml=true, have_libxml=false)
782 if ! $have_libxml ; then
783 AC_MSG_ERROR([Explicitly requested libxml but libxml not found])
787 ### expat is the default because libxml can't currently survive
788 ### our brutal OOM-handling unit test setup.
789 ### http://bugzilla.gnome.org/show_bug.cgi?id=109368
790 if test x$have_expat = xfalse; then
791 AC_MSG_ERROR([Could not find expat.h, check config.log for failed attempts])
793 ### By default, only use Expat since it's tested and known to work. If you're a
794 ### general-purpose OS vendor, please don't enable libxml. For embedded use
795 ### if your OS is built around libxml, that's another case.
799 AM_CONDITIONAL(DBUS_USE_EXPAT, $dbus_use_expat)
800 AM_CONDITIONAL(DBUS_USE_LIBXML, $dbus_use_libxml)
802 if $dbus_use_expat; then
806 if $dbus_use_libxml; then
807 XML_LIBS=$LIBXML_LIBS
808 XML_CFLAGS=$LIBXML_CFLAGS
811 # Thread lib detection
812 AC_CHECK_FUNC(pthread_cond_timedwait,[AC_CHECK_LIB(pthread,pthread_cond_timedwait,
813 [THREAD_LIBS="-lpthread"])])
815 LIBS="$LIBS $THREAD_LIBS"
816 AC_CHECK_FUNC(pthread_condattr_setclock,have_pthread_condattr_setclock=true,have_pthread_condattr_setclock=false)
817 if test x$have_pthread_condattr_setclock = xtrue; then
818 AC_SEARCH_LIBS([clock_getres],[rt],[THREAD_LIBS="$THREAD_LIBS -lrt"])
819 AC_MSG_CHECKING([for CLOCK_MONOTONIC])
820 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <time.h>
823 struct timespec monotonic_timer;
824 pthread_condattr_t attr;
825 pthread_condattr_init (&attr);
826 pthread_condattr_setclock (&attr, CLOCK_MONOTONIC);
827 clock_getres (CLOCK_MONOTONIC,&monotonic_timer);
829 [have_clock_monotonic=true],
830 [have_clock_monotonic=false])
831 if test x$have_clock_monotonic = xtrue; then
832 AC_MSG_RESULT([found])
833 AC_DEFINE(HAVE_MONOTONIC_CLOCK, 1, [Define if we have CLOCK_MONOTONIC])
835 AC_MSG_RESULT([not found])
841 if test x$enable_selinux = xno ; then
844 # See if we have SELinux library
845 AC_CHECK_LIB(selinux, is_selinux_enabled,
846 have_selinux=yes, have_selinux=no)
848 # see if we have the SELinux header with the new D-Bus stuff in it
849 if test x$have_selinux = xyes ; then
850 AC_MSG_CHECKING([for DBUS Flask permissions in selinux/av_permissions.h])
851 AC_TRY_COMPILE([#include <selinux/av_permissions.h>],
852 [#ifdef DBUS__ACQUIRE_SVC return 0;
854 #error DBUS__ACQUIRE_SVC not defined
856 have_selinux=yes, have_selinux=no)
857 AC_MSG_RESULT($have_selinux)
860 if test x$enable_selinux = xauto ; then
861 if test x$have_selinux = xno ; then
862 AC_MSG_WARN([Sufficiently new SELinux library not found])
865 if test x$have_selinux = xno ; then
866 AC_MSG_ERROR([SElinux explicitly required, and SELinux library not found])
871 AM_CONDITIONAL(HAVE_SELINUX, test x$have_selinux = xyes)
873 if test x$have_selinux = xyes ; then
874 # the selinux code creates threads
875 # which requires libpthread even on linux
876 AC_CHECK_FUNC(pthread_create,,[AC_CHECK_LIB(pthread,pthread_create,
877 [SELINUX_THREAD_LIBS="-lpthread"])])
879 SELINUX_LIBS="-lselinux $SELINUX_THREAD_LIBS"
880 AC_DEFINE(HAVE_SELINUX,1,[SELinux support])
886 if test x$enable_inotify = xno ; then
889 AC_CHECK_HEADERS(sys/inotify.h, have_inotify=yes, have_inotify=no)
892 dnl check if inotify backend is enabled
893 if test x$have_inotify = xyes; then
894 AC_DEFINE(DBUS_BUS_ENABLE_INOTIFY,1,[Use inotify])
895 AC_CHECK_FUNCS(inotify_init1)
898 AM_CONDITIONAL(DBUS_BUS_ENABLE_INOTIFY, test x$have_inotify = xyes)
901 if test x$enable_dnotify = xno ; then
904 if test x$have_inotify = xno -a x$host_os = xlinux-gnu -o x$host_os = xlinux; then
911 dnl check if dnotify backend is enabled
912 if test x$have_dnotify = xyes; then
913 AC_DEFINE(DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX,1,[Use dnotify on Linux])
916 AM_CONDITIONAL(DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX, test x$have_dnotify = xyes)
919 if test x$enable_kqueue = xno ; then
923 AC_CHECK_HEADER(sys/event.h, , have_kqueue=no)
924 AC_CHECK_FUNC(kqueue, , have_kqueue=no)
926 if test x$enable_kqueue = xyes -a x$have_kqueue = xno; then
927 AC_MSG_ERROR(kqueue support explicitly enabled but not available)
931 dnl check if kqueue backend is enabled
932 if test x$have_kqueue = xyes; then
933 AC_DEFINE(DBUS_BUS_ENABLE_KQUEUE,1,[Use kqueue])
936 AM_CONDITIONAL(DBUS_BUS_ENABLE_KQUEUE, test x$have_kqueue = xyes)
939 if test x$enable_launchd = xno ; then
943 AC_CHECK_HEADER([launch.h], , have_launchd=no)
944 AC_PATH_PROG([LAUNCHCTL], [launchctl])
945 if test "x$LAUNCHCTL" = "x"; then
949 if test x$enable_launchd = xyes && test x$have_launchd = xno ; then
950 AC_MSG_ERROR([launchd support explicitly enabled but not available])
954 dnl check if launchd is enabled
955 if test x$have_launchd = xyes; then
956 AC_DEFINE(DBUS_ENABLE_LAUNCHD,1,[Use launchd autolaunch])
959 AM_CONDITIONAL(DBUS_ENABLE_LAUNCHD, test x$have_launchd = xyes)
961 #### Directory to place launchd agent file
962 if test "x$with_launchd_agent_dir" = "x"; then
963 LAUNCHD_AGENT_DIR="/Library/LaunchAgents"
965 LAUNCHD_AGENT_DIR="$with_launchd_agent_dir"
968 AC_SUBST(LAUNCHD_AGENT_DIR)
970 dnl console owner file
971 if test x$enable_console_owner_file = xno ; then
972 have_console_owner_file=no;
976 have_console_owner_file=yes;
977 AC_DEFINE(HAVE_CONSOLE_OWNER_FILE,1,[Have console owner file])
980 have_console_owner_file=no;;
984 AM_CONDITIONAL(HAVE_CONSOLE_OWNER_FILE, test x$have_console_owner_file = xyes)
987 if test x$enable_libaudit = xno ; then
990 # See if we have audit daemon & capabilities library
991 AC_CHECK_LIB(audit, audit_log_user_avc_message,
992 have_libaudit=yes, have_libaudit=no)
993 if test x$have_libaudit = xyes ; then
994 AC_CHECK_LIB(cap-ng, capng_clear,
995 have_libaudit=yes, have_libaudit=no)
999 AM_CONDITIONAL(HAVE_LIBAUDIT, test x$have_libaudit = xyes)
1001 if test x$have_libaudit = xyes ; then
1002 SELINUX_LIBS="$SELINUX_LIBS -laudit -lcap-ng"
1003 AC_DEFINE(HAVE_LIBAUDIT,1,[audit daemon SELinux support])
1007 AC_MSG_CHECKING(for ADT API)
1008 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1009 #include <bsm/adt.h>
1010 adt_user_context = ADT_USER;
1011 ]], [[]])], [ check_adt_audit=yes ], [ check_adt_audit=no ])
1013 if test ${check_adt_audit} = yes
1015 AC_DEFINE([HAVE_ADT], [], [Adt audit API])
1023 # Check for SCM_RIGHTS
1024 AC_MSG_CHECKING([for SCM_RIGHTS])
1025 AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[
1026 #include <sys/socket.h>
1028 static int x = SCM_RIGHTS;
1030 [ AC_MSG_RESULT([supported])
1031 AC_DEFINE([HAVE_UNIX_FD_PASSING], [1], [Supports sending UNIX file descriptors]) ],
1032 [ AC_MSG_RESULT([not supported]) ])
1035 if test x$dbus_win = xyes ; then
1036 if test x$dbus_wince = xyes ; then
1037 NETWORK_libs="-lws2"
1039 NETWORK_libs="-lws2_32"
1043 #### Set up final flags
1045 DBUS_CLIENT_LIBS="$THREAD_LIBS $NETWORK_libs"
1046 AC_SUBST(DBUS_CLIENT_CFLAGS)
1047 AC_SUBST(DBUS_CLIENT_LIBS)
1049 DBUS_BUS_CFLAGS="$XML_CFLAGS"
1050 DBUS_BUS_LIBS="$XML_LIBS $SELINUX_LIBS $THREAD_LIBS $ADT_LIBS $NETWORK_libs"
1051 AC_SUBST(DBUS_BUS_CFLAGS)
1052 AC_SUBST(DBUS_BUS_LIBS)
1054 DBUS_LAUNCHER_CFLAGS="$XML_CFLAGS"
1055 DBUS_LAUNCHER_LIBS="$XML_LIBS $THREAD_LIBS $NETWORK_libs"
1056 AC_SUBST(DBUS_LAUNCHER_CFLAGS)
1057 AC_SUBST(DBUS_LAUNCHER_LIBS)
1060 DBUS_TEST_LIBS="$THREAD_LIBS $NETWORK_libs"
1061 AC_SUBST(DBUS_TEST_CFLAGS)
1062 AC_SUBST(DBUS_TEST_LIBS)
1065 if test x$dbus_win = xyes ; then
1070 ## for now enable_x11 just tracks have_x11,
1071 ## there's no --enable-x11
1072 if test x$no_x = xyes ; then
1080 if test x$enable_x11 = xyes ; then
1081 AC_DEFINE(DBUS_BUILD_X11,1,[Build X11-dependent code])
1082 DBUS_X_LIBS="$X_LIBS $X_PRE_LIBS -lX11 $X_EXTRA_LIBS"
1083 DBUS_X_CFLAGS="$X_CFLAGS"
1089 AC_SUBST(DBUS_X_CFLAGS)
1090 AC_SUBST(DBUS_X_LIBS)
1094 #### gcc warning flags
1096 cc_supports_flag() {
1097 AC_MSG_CHECKING(whether $CC supports "$*")
1098 save_CFLAGS="$CFLAGS"
1100 AC_TRY_COMPILE([], [], [rc=yes], [rc=no])
1101 CFLAGS="$save_CFLAGS"
1102 AC_MSG_RESULT([$rc])
1106 ld_supports_flag() {
1107 AC_MSG_CHECKING([whether $LD supports "$@"])
1109 int one(void) { return 1; }
1110 int two(void) { return 2; }
1111 ], [ two(); ] , [_ac_ld_flag_supported=yes], [_ac_ld_flag_supported=no])
1113 if test "$_ac_ld_flag_supported" = "yes"; then
1116 if $CC -c conftest.c; then
1117 ld_out=`$LD $@ -o conftest conftest.o 2>&1`
1119 if test $ld_ret -ne 0 ; then
1120 _ac_ld_flag_supported=no
1121 elif echo "$ld_out" | egrep 'option ignored|^usage:|unrecognized option|illegal option' >/dev/null ; then
1122 _ac_ld_flag_supported=no
1125 rm -f conftest.c conftest.o conftest
1128 AC_MSG_RESULT($_ac_ld_flag_supported)
1129 if test "$_ac_ld_flag_supported" = "yes" ; then
1136 # Don't bother with -Werror on Windows for now, too many warnings
1137 if test x$dbus_win != xyes -a x$dbus_cygwin != xyes -a x$USE_MAINTAINER_MODE = xyes; then
1138 if cc_supports_flag "-Werror"; then
1139 CFLAGS="$CFLAGS -Werror"
1143 if test "x$GCC" = "xyes"; then
1146 *[\ \ ]-Wall[\ \ ]*) ;;
1147 *) CFLAGS="$CFLAGS -Wall" ;;
1151 *[\ \ ]-Wchar-subscripts[\ \ ]*) ;;
1152 *) CFLAGS="$CFLAGS -Wchar-subscripts" ;;
1156 *[\ \ ]-Wmissing-declarations[\ \ ]*) ;;
1157 *) CFLAGS="$CFLAGS -Wmissing-declarations" ;;
1161 *[\ \ ]-Wmissing-prototypes[\ \ ]*) ;;
1162 *) CFLAGS="$CFLAGS -Wmissing-prototypes" ;;
1166 *[\ \ ]-Wnested-externs[\ \ ]*) ;;
1167 *) CFLAGS="$CFLAGS -Wnested-externs" ;;
1171 *[\ \ ]-Wpointer-arith[\ \ ]*) ;;
1172 *) CFLAGS="$CFLAGS -Wpointer-arith" ;;
1176 *[\ \ ]-Wcast-align[\ \ ]*) ;;
1177 *) CFLAGS="$CFLAGS -Wcast-align" ;;
1181 *[\ \ ]-Wno-address[\ \ ]*) ;;
1182 *) CFLAGS="$CFLAGS -Wno-address" ;;
1186 *[\ \ ]-Wfloat-equal[\ \ ]*) ;;
1187 *) if cc_supports_flag -Wfloat-equal; then
1188 CFLAGS="$CFLAGS -Wfloat-equal"
1194 *[\ \ ]-Wdeclaration-after-statement[\ \ ]*) ;;
1195 *) if cc_supports_flag -Wdeclaration-after-statement; then
1196 CFLAGS="$CFLAGS -Wdeclaration-after-statement"
1202 *[\ \ ]-fno-common[\ \ ]*) ;;
1203 *) if cc_supports_flag -fno-common; then
1204 CFLAGS="$CFLAGS -fno-common"
1210 *[\ \ ]-fPIC[\ \ ]*) ;;
1211 *) if test x$dbus_win = xno && cc_supports_flag -fPIC; then
1213 if ld_supports_flag -z,relro; then
1214 PIC_LDFLAGS="-Wl,-z,relro"
1221 *[\ \ ]-fPIE[\ \ ]*) ;;
1222 *) if test x$dbus_win = xno && cc_supports_flag -fPIE; then
1224 if ld_supports_flag -z,relro; then
1225 PIE_LDFLAGS="-pie -Wl,-z,relro"
1233 ### Disabled warnings, and compiler flag overrides
1235 # Let's just ignore unused for now
1237 *[\ \ ]-Wno-unused[\ \ ]*) ;;
1238 *) CFLAGS="$CFLAGS -Wno-unused" ;;
1241 # This group is for warnings we currently don't pass.
1242 # We would like to, however. Please fix.
1244 # http://bugs.freedesktop.org/show_bug.cgi?id=17433
1246 *[\ \ ]-Wno-sign-compare[\ \ ]*) ;;
1247 *) CFLAGS="$CFLAGS -Wno-sign-compare" ;;
1250 *[\ \ ]-Wno-pointer-sign[\ \ ]*) ;;
1251 *) if cc_supports_flag -Wno-pointer-sign; then
1252 CFLAGS="$CFLAGS -Wno-pointer-sign"
1257 # This one is special - it's not a warning override.
1258 # http://bugs.freedesktop.org/show_bug.cgi?id=10599
1260 *[\ \ ]-fno-strict-aliasing[\ \ ]*) ;;
1261 *) CFLAGS="$CFLAGS -fno-strict-aliasing" ;;
1263 ### End disabled warnings
1265 if test "x$enable_ansi" = "xyes"; then
1267 *[\ \ ]-ansi[\ \ ]*) ;;
1268 *) CFLAGS="$CFLAGS -ansi" ;;
1272 *[\ \ ]-D_POSIX_C_SOURCE*) ;;
1273 *) CFLAGS="$CFLAGS -D_POSIX_C_SOURCE=199309L" ;;
1277 *[\ \ ]-D_BSD_SOURCE[\ \ ]*) ;;
1278 *) CFLAGS="$CFLAGS -D_BSD_SOURCE" ;;
1282 *[\ \ ]-pedantic[\ \ ]*) ;;
1283 *) CFLAGS="$CFLAGS -pedantic" ;;
1289 AC_SUBST(PIC_CFLAGS)
1290 AC_SUBST(PIC_LDFLAGS)
1291 AC_SUBST(PIE_CFLAGS)
1292 AC_SUBST(PIE_LDFLAGS)
1294 if ld_supports_flag --gc-sections; then
1295 SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS"
1296 CFLAGS="-ffunction-sections -fdata-sections $CFLAGS"
1298 AC_SUBST(SECTION_FLAGS)
1299 AC_SUBST(SECTION_LDFLAGS)
1300 AC_MSG_RESULT($ac_gcsections)
1304 # Solaris' C library apparently needs these runes to be threadsafe...
1305 CFLAGS="$CFLAGS -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT"
1309 # compress spaces in flags
1310 CFLAGS=`echo "$CFLAGS" | sed -e 's/ +/ /g'`
1311 CXXFLAGS=`echo "$CXXFLAGS" | sed -e 's/ +/ /g'`
1312 CPPFLAGS=`echo "$CPPFLAGS" | sed -e 's/ +/ /g'`
1315 ### Doxygen Documentation
1317 AC_PATH_PROG(DOXYGEN, doxygen, no)
1319 AC_MSG_CHECKING([whether to build Doxygen documentation])
1321 if test x$DOXYGEN = xno ; then
1327 if test x$enable_doxygen_docs = xauto ; then
1328 if test x$have_doxygen = xno ; then
1329 enable_doxygen_docs=no
1331 enable_doxygen_docs=yes
1335 if test x$enable_doxygen_docs = xyes; then
1336 if test x$have_doxygen = xno; then
1337 AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found])
1341 AM_CONDITIONAL(DBUS_DOXYGEN_DOCS_ENABLED, test x$enable_doxygen_docs = xyes)
1342 AC_MSG_RESULT($enable_doxygen_docs)
1344 ### XML Documentation
1346 AC_PATH_PROG(XMLTO, xmlto, no)
1348 AC_MSG_CHECKING([whether to build XML documentation])
1350 if test x$XMLTO = xno ; then
1356 if test x$enable_xml_docs = xauto ; then
1357 if test x$have_xmlto = xno ; then
1364 if test x$enable_xml_docs = xyes; then
1365 if test x$have_xmlto = xno; then
1366 AC_MSG_ERROR([Building XML docs explicitly required, but xmlto not found])
1370 AM_CONDITIONAL(DBUS_XML_DOCS_ENABLED, test x$enable_xml_docs = xyes)
1371 AC_MSG_RESULT($enable_xml_docs)
1373 AC_PATH_PROG([MAN2HTML], [man2html])
1374 AC_ARG_VAR([MAN2HTML], [Path to man2html (optional)])
1375 AM_CONDITIONAL(DBUS_HAVE_MAN2HTML, test x$MAN2HTML != x)
1377 AM_CONDITIONAL(DBUS_CAN_UPLOAD_DOCS,
1378 test x$enable_doxygen_docs = xyes -a x$enable_xml_docs = xyes -a \
1381 #### Have to go $localstatedir->$prefix/var->/usr/local/var
1383 #### find the actual value for $prefix that we'll end up with
1384 ## (I know this is broken and should be done in the Makefile, but
1385 ## that's a major pain and almost nobody actually seems to care)
1386 AS_AC_EXPAND(EXPANDED_PREFIX, "$prefix")
1387 AS_AC_EXPAND(EXPANDED_LOCALSTATEDIR, "$localstatedir")
1388 AS_AC_EXPAND(EXPANDED_SYSCONFDIR, "$sysconfdir")
1389 AS_AC_EXPAND(EXPANDED_BINDIR, "$bindir")
1390 AS_AC_EXPAND(EXPANDED_LIBDIR, "$libdir")
1391 AS_AC_EXPAND(EXPANDED_LIBEXECDIR, "$libexecdir")
1392 AS_AC_EXPAND(EXPANDED_DATADIR, "$datadir")
1394 #### Check our operating system
1395 operating_system=unknown
1396 if test -f /etc/redhat-release || test -f $EXPANDED_SYSCONFDIR/redhat-release ; then
1397 operating_system=redhat
1400 if test -f /etc/slackware-version || test -f $EXPANDED_SYSCONFDIR/slackware-version ; then
1401 operating_system=slackware
1404 if test -f /usr/bin/cygwin1.dll || test -f $EXPANDED_BINDIR/cygwin1.dll ; then
1405 operating_system=cygwin
1408 #### Sort out init scripts
1410 if test x$with_init_scripts = x; then
1411 case x$operating_system in
1412 xredhat) with_init_scripts=redhat ;;
1413 xslackware) with_init_scripts=slackware ;;
1414 xcygwin) with_init_scripts=cygwin ;;
1415 *) with_init_scripts=none ;;
1419 AM_CONDITIONAL(DBUS_INIT_SCRIPTS_RED_HAT, test x$with_init_scripts = xredhat)
1420 AM_CONDITIONAL(DBUS_INIT_SCRIPTS_SLACKWARE, test x$with_init_scripts = xslackware)
1421 AM_CONDITIONAL(DBUS_INIT_SCRIPTS_CYGWIN, test x$with_init_scripts = xcygwin)
1423 ##### systemd unit files
1424 AC_ARG_WITH([systemdsystemunitdir],
1425 AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),
1426 [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)])
1427 if test "x$with_systemdsystemunitdir" != xno; then
1428 AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])
1430 AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir" -a "x$with_systemdsystemunitdir" != xno ])
1432 ##### Set up location for system bus socket
1433 if ! test -z "$with_system_socket"; then
1434 DBUS_SYSTEM_SOCKET=$with_system_socket
1436 DBUS_SYSTEM_SOCKET=${EXPANDED_LOCALSTATEDIR}/run/dbus/system_bus_socket
1439 AC_SUBST(DBUS_SYSTEM_SOCKET)
1440 AC_DEFINE_UNQUOTED(DBUS_SYSTEM_SOCKET,"$DBUS_SYSTEM_SOCKET",[The name of the socket the system bus listens on by default])
1442 ## system bus only listens on local domain sockets, and never
1443 ## on an abstract socket (so only root can create the socket)
1444 DBUS_SYSTEM_BUS_DEFAULT_ADDRESS="unix:path=$DBUS_SYSTEM_SOCKET"
1445 AC_SUBST(DBUS_SYSTEM_BUS_DEFAULT_ADDRESS)
1446 AC_DEFINE_UNQUOTED(DBUS_SYSTEM_BUS_DEFAULT_ADDRESS, "$DBUS_SYSTEM_BUS_DEFAULT_ADDRESS",[The default D-Bus address of the system bus])
1448 #### Set up the pid file
1449 if ! test -z "$with_system_pid_file"; then
1450 DBUS_SYSTEM_PID_FILE=$with_system_pid_file
1451 elif test x$with_init_scripts = xredhat ; then
1452 DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/messagebus.pid
1454 DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/dbus/pid
1457 AC_SUBST(DBUS_SYSTEM_PID_FILE)
1459 #### Directory to check for console ownership
1460 if ! test -z "$with_console_auth_dir"; then
1461 DBUS_CONSOLE_AUTH_DIR=$with_console_auth_dir
1463 DBUS_CONSOLE_AUTH_DIR=/var/run/console/
1466 AC_SUBST(DBUS_CONSOLE_AUTH_DIR)
1467 AC_DEFINE_UNQUOTED(DBUS_CONSOLE_AUTH_DIR, "$DBUS_CONSOLE_AUTH_DIR", [Directory to check for console ownerhip])
1469 #### File to check for console ownership
1470 if test x$have_console_owner_file = xyes; then
1471 if ! test -z "$with_console_owner_file"; then
1472 DBUS_CONSOLE_OWNER_FILE=$with_console_owner_file
1474 DBUS_CONSOLE_OWNER_FILE=/dev/console
1477 DBUS_CONSOLE_OWNER_FILE=
1480 AC_SUBST(DBUS_CONSOLE_OWNER_FILE)
1481 AC_DEFINE_UNQUOTED(DBUS_CONSOLE_OWNER_FILE, "$DBUS_CONSOLE_OWNER_FILE", [File to check for console ownerhip])
1483 #### User to start the system bus as
1484 if test -z "$with_dbus_user" ; then
1485 DBUS_USER=messagebus
1487 DBUS_USER=$with_dbus_user
1490 AC_DEFINE_UNQUOTED(DBUS_USER,"$DBUS_USER", [User for running the system BUS daemon])
1492 #### Prefix to install into
1493 DBUS_PREFIX=$EXPANDED_PREFIX
1494 AC_SUBST(DBUS_PREFIX)
1495 AC_DEFINE_UNQUOTED(DBUS_PREFIX,"$DBUS_PREFIX", [Prefix for installing DBUS])
1497 #### Direcotry to install data files into
1498 DBUS_DATADIR=$EXPANDED_DATADIR
1499 AC_SUBST(DBUS_DATADIR)
1500 AC_DEFINE_UNQUOTED(DBUS_DATADIR,"$DBUS_DATADIR", [Directory for installing DBUS data files])
1502 #### Directory to install dbus-daemon
1503 if test -z "$with_dbus_daemondir" ; then
1504 DBUS_DAEMONDIR=$EXPANDED_BINDIR
1506 DBUS_DAEMONDIR=$with_dbus_daemondir
1508 AC_SUBST(DBUS_DAEMONDIR)
1509 AC_DEFINE_UNQUOTED(DBUS_DAEMONDIR,"$DBUS_DAEMONDIR", [Directory for installing the DBUS daemon])
1511 #### Directory to install the other binaries
1512 DBUS_BINDIR="$EXPANDED_BINDIR"
1513 AC_SUBST(DBUS_BINDIR)
1514 AC_DEFINE_UNQUOTED(DBUS_BINDIR,"$DBUS_BINDIR", [Directory for installing the binaries])
1516 #### Directory to install the libexec binaries
1517 DBUS_LIBEXECDIR="$EXPANDED_LIBEXECDIR"
1518 AC_SUBST(DBUS_LIBEXECDIR)
1519 AC_DEFINE_UNQUOTED(DBUS_LIBEXECDIR,"$DBUS_LIBEXECDIR", [Directory for installing the libexec binaries])
1521 #### Tell tests where to find certain stuff in builddir
1524 # Useful in a cross-compilation environment, where the tests are run on the host system.
1525 AC_ARG_WITH(dbus-test-dir, AS_HELP_STRING([--with-dbus-test-dir=[dirname]],[path where the tests tools are available]),
1527 AC_DEFUN([TEST_PATH], [
1528 TEST_$1=${DBUS_PWD}/test/$2
1529 AC_DEFINE_UNQUOTED(TEST_$1, "$TEST_$1",
1530 [Full path to test file test/$2 in builddir])
1533 AC_DEFUN([TEST_PROG], [
1534 TEST_$1=${DBUS_PWD}/test/$2
1535 AC_DEFINE_UNQUOTED(TEST_$1, "$TEST_$1$EXEEXT",
1536 [Full path to test file test/$2 in builddir])
1540 TEST_PATH(VALID_SERVICE_DIR, data/valid-service-files)
1541 TEST_PATH(INVALID_SERVICE_DIR, data/invalid-service-files)
1542 TEST_PATH(VALID_SERVICE_SYSTEM_DIR, data/valid-service-files-system)
1543 TEST_PATH(INVALID_SERVICE_SYSTEM_DIR, data/invalid-service-files-system)
1544 TEST_PROG(SERVICE_BINARY, test-service)
1545 TEST_PROG(SHELL_SERVICE_BINARY, test-shell-service)
1546 TEST_PROG(EXIT_BINARY, test-exit)
1547 TEST_PROG(SEGFAULT_BINARY, test-segfault)
1548 TEST_PROG(SLEEP_FOREVER_BINARY, test-sleep-forever)
1549 TEST_PROG(PRIVSERVER_BINARY, name-test/test-privserver)
1551 AC_DEFINE_UNQUOTED(TEST_BUS_BINARY, "$DBUS_PWD/bus/dbus-daemon$EXEEXT",
1552 [Full path to the daemon in the builddir])
1553 AC_SUBST(TEST_BUS_BINARY)
1555 ## Export the non-setuid external helper
1556 TEST_LAUNCH_HELPER_BINARY="$DBUS_PWD/bus/dbus-daemon-launch-helper-test$EXEEXT"
1557 AC_SUBST(TEST_LAUNCH_HELPER_BINARY)
1558 AC_DEFINE_UNQUOTED(DBUS_TEST_LAUNCH_HELPER_BINARY, "$TEST_LAUNCH_HELPER_BINARY",
1559 [Full path to the launch helper test program in the builddir])
1561 #### Find socket directories
1562 if ! test -z "$TMPDIR" ; then
1563 DEFAULT_SOCKET_DIR=$TMPDIR
1564 elif ! test -z "$TEMP" ; then
1565 DEFAULT_SOCKET_DIR=$TEMP
1566 elif ! test -z "$TMP" ; then
1567 DEFAULT_SOCKET_DIR=$TMP
1569 DEFAULT_SOCKET_DIR=/tmp
1572 DEFAULT_SOCKET_DIR=`echo $DEFAULT_SOCKET_DIR | sed 's/+/%2B/g'`
1574 if ! test -z "$with_test_socket_dir" ; then
1575 TEST_SOCKET_DIR="$with_test_socket_dir"
1577 TEST_SOCKET_DIR=$DEFAULT_SOCKET_DIR
1579 AC_SUBST(TEST_SOCKET_DIR)
1580 AC_DEFINE_UNQUOTED(DBUS_TEST_SOCKET_DIR, "$TEST_SOCKET_DIR", [Where to put test sockets])
1582 if ! test -z "$with_session_socket_dir" ; then
1583 DBUS_SESSION_SOCKET_DIR="$with_session_socket_dir"
1585 DBUS_SESSION_SOCKET_DIR=$DEFAULT_SOCKET_DIR
1587 AC_DEFINE_UNQUOTED(DBUS_SESSION_SOCKET_DIR, "$DBUS_SESSION_SOCKET_DIR", [Where per-session bus puts its sockets])
1588 AC_SUBST(DBUS_SESSION_SOCKET_DIR)
1590 if test x$dbus_win = xyes; then
1591 DBUS_SESSION_BUS_DEFAULT_ADDRESS="nonce-tcp:"
1592 elif test x$have_launchd = xyes; then
1593 DBUS_SESSION_BUS_DEFAULT_ADDRESS="launchd:env=DBUS_LAUNCHD_SESSION_BUS_SOCKET"
1595 DBUS_SESSION_BUS_DEFAULT_ADDRESS="unix:tmpdir=$DBUS_SESSION_SOCKET_DIR"
1597 AC_SUBST(DBUS_SESSION_BUS_DEFAULT_ADDRESS)
1599 # darwin needs this to initialize the environment
1600 AC_CHECK_HEADERS(crt_externs.h)
1601 AC_CHECK_FUNC(_NSGetEnviron, [AC_DEFINE(HAVE_NSGETENVIRON, 1, [Define if your system needs _NSGetEnviron to set up the environment])])
1602 AH_VERBATIM(_DARWIN_ENVIRON,
1604 #if defined(HAVE_NSGETENVIRON) && defined(HAVE_CRT_EXTERNS_H)
1605 # include <sys/time.h>
1606 # include <crt_externs.h>
1607 # define environ (*_NSGetEnviron())
1614 dbus/dbus-arch-deps.h
1618 bus/messagebus-config
1619 bus/org.freedesktop.dbus-session.plist
1628 test/name-test/Makefile
1632 test/data/valid-config-files/debug-allow-all.conf
1633 test/data/valid-config-files/debug-allow-all-sha1.conf
1634 test/data/valid-config-files-system/debug-allow-all-pass.conf
1635 test/data/valid-config-files-system/debug-allow-all-fail.conf
1636 test/data/valid-service-files/org.freedesktop.DBus.TestSuite.PrivServer.service
1637 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteEchoService.service
1638 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteForkingEchoService.service
1639 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteSegfaultService.service
1640 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service
1641 test/data/valid-service-files/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service
1642 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteEchoService.service
1643 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteSegfaultService.service
1644 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceSuccess.service
1645 test/data/valid-service-files-system/org.freedesktop.DBus.TestSuiteShellEchoServiceFail.service
1646 test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service
1647 test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service
1648 test/data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service
1651 dnl ==========================================================================
1656 prefix: ${EXPANDED_PREFIX}
1657 exec_prefix: ${exec_prefix}
1658 libdir: ${EXPANDED_LIBDIR}
1659 libexecdir: ${EXPANDED_LIBEXECDIR}
1660 bindir: ${EXPANDED_BINDIR}
1661 sysconfdir: ${EXPANDED_SYSCONFDIR}
1662 localstatedir: ${EXPANDED_LOCALSTATEDIR}
1663 datadir: ${EXPANDED_DATADIR}
1664 source code location: ${srcdir}
1667 cppflags: ${CPPFLAGS}
1668 cxxflags: ${CXXFLAGS}
1669 64-bit int: ${DBUS_INT64_TYPE}
1670 32-bit int: ${DBUS_INT32_TYPE}
1671 16-bit int: ${DBUS_INT16_TYPE}
1672 Doxygen: ${DOXYGEN:-not found}
1673 xmlto: ${XMLTO:-not found}
1674 man2html: ${MAN2HTML:-not found}"
1677 Maintainer mode: ${USE_MAINTAINER_MODE}
1678 gcc coverage profiling: ${enable_compiler_coverage}
1679 Building unit tests: ${enable_tests}
1680 Building verbose mode: ${enable_verbose_mode}
1681 Building assertions: ${enable_asserts}
1682 Building checks: ${enable_checks}
1683 Building SELinux support: ${have_selinux}
1684 Building inotify support: ${have_inotify}
1685 Building dnotify support: ${have_dnotify}
1686 Building kqueue support: ${have_kqueue}
1687 Building X11 code: ${enable_x11}
1688 Building Doxygen docs: ${enable_doxygen_docs}
1689 Building XML docs: ${enable_xml_docs}
1690 Building cache support: ${enable_userdb_cache}
1691 Building launchd support: ${have_launchd}
1692 Using XML parser: ${with_xml}
1693 Init scripts style: ${with_init_scripts}
1694 Abstract socket names: ${ac_cv_have_abstract_sockets}
1695 System bus socket: ${DBUS_SYSTEM_SOCKET}
1696 System bus address: ${DBUS_SYSTEM_BUS_DEFAULT_ADDRESS}
1697 System bus PID file: ${DBUS_SYSTEM_PID_FILE}
1698 Session bus address: ${DBUS_SESSION_BUS_DEFAULT_ADDRESS}
1699 Console auth dir: ${DBUS_CONSOLE_AUTH_DIR}
1700 Console owner file: ${have_console_owner_file}
1701 Console owner file path: ${DBUS_CONSOLE_OWNER_FILE}
1702 System bus user: ${DBUS_USER}
1703 Session bus services dir: ${EXPANDED_DATADIR}/dbus-1/services
1704 'make check' socket dir: ${TEST_SOCKET_DIR}
1706 if test x$have_launchd = xyes; then
1707 echo " launchd agent dir: ${LAUNCHD_AGENT_DIR}"
1711 if test x$enable_tests = xyes; then
1712 echo "NOTE: building with unit tests increases the size of the installed library and renders it insecure."
1714 if test x$enable_tests = xyes -a x$enable_asserts = xno; then
1715 echo "NOTE: building with unit tests but without assertions means tests may not properly report failures (this configuration is only useful when doing something like profiling the tests)"
1717 if test x$enable_compiler_coverage = xyes; then
1718 echo "NOTE: building with coverage profiling is definitely for developers only."
1720 if test x$enable_verbose_mode = xyes; then
1721 echo "NOTE: building with verbose mode increases library size, may slightly increase security risk, and decreases performance."
1723 if test x$enable_asserts = xyes; then
1724 echo "NOTE: building with assertions increases library size and decreases performance."
1726 if test x$enable_checks = xno; then
1727 echo "NOTE: building without checks for arguments passed to public API makes it harder to debug apps using D-Bus, but will slightly decrease D-Bus library size and _very_ slightly improve performance."
1729 if test x$dbus_use_libxml = xtrue; then
1731 echo "WARNING: You have chosen to use libxml as your xml parser however this code path is not maintained by the D-Bus developers and if it breaks you get to keep the pieces. If you have selected this option in err please reconfigure with expat (e.g. --with-xml=expat)."