2 # Guess values for system-dependent variables and create Makefiles.
3 # Generated by GNU Autoconf 2.52e for GNU Automake 1.5a.
5 # Report bugs to <bug-automake@gnu.org>.
7 # Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
8 # Free Software Foundation, Inc.
9 # This configure script is free software; the Free Software Foundation
10 # gives unlimited permission to copy, distribute and modify it.
12 ## --------------------- ##
13 ## M4sh Initialization. ##
14 ## --------------------- ##
16 # Be Bourne compatible
17 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
20 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
24 # Name of the executable.
25 as_me=`echo "$0" |sed 's,\(.*[\\/]\+\)\?\([^\\/]\+\)[\\/]*,\2,'`
27 # If LINENO is not supported by the shell, produce a version of this
28 # script where LINENO is hard coded. Rewrite if not up to date only.
29 # Comparing LINENO against _oline_ is not a good solution, since in
30 # the case of embedded executables (such as config.status within
31 # configure) you'd compare LINENO wrt config.status vs. _oline_ vs
32 # configure. Hence a useless rewrite (not to mention the risk of
33 # ``infinite'' rewrites. Merely check that LINENO is incremented
34 # between two lines, which is a property guaranteed for _oline_, hence
35 # it protects us from repetitive rewrites.
38 # Compute as_lineno_1 in two steps: some shells restart LINENO for
40 as_lineno_1=`(expr $as_lineno_1 + 1) 2>/dev/null`
41 if test "x$as_lineno_1" != "x$as_lineno_2"; then
42 if test ! -f $as_me.lineno ||
43 test x`ls -1dt $as_me.lineno $as_me 2>/dev/null | sed 1q` \
44 != x$as_me.lineno; then
45 # Be sure to write the pattern so that it doesn't replace itself:
46 # it must not match itself.
49 while (sub (/[$]LINENO/, NR))
52 }' <$as_me >$as_me.lineno
53 chmod +x $as_me.lineno
55 exec ${SHELL-/bin/sh} ./$as_me.lineno
58 # Avoid depending upon Character Ranges.
59 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
60 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
61 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
62 as_cr_digits='0123456789'
63 as_cr_alnum=$as_cr_Letters$as_cr_digits
65 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
66 *c*,-n*) ECHO_N= ECHO_C='
68 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
69 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
72 if expr a : '\(a\)' >/dev/null 2>&1; then
78 rm -f conf$$ conf$$.exe conf$$.file
80 if ln -s conf$$.file conf$$ 2>/dev/null; then
81 # We could just check for DJGPP; but this test a) works b) is more generic
82 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
83 if test -f conf$$.exe; then
84 # Don't use ln at all; we don't have any links
89 elif ln conf$$.file conf$$ 2>/dev/null; then
94 rm -f conf$$ conf$$.exe conf$$.file
96 # The user is always right.
97 if test "${PATH_SEPARATOR+set}" != set; then
98 echo "#! $SHELL" >conftest.sh
99 echo "exit 0" >>conftest.sh
101 if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
109 as_executable_p="test -f"
111 # Sed expression to map a string onto a valid CPP name.
112 as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
114 # Sed expression to map a string onto a valid variable name.
115 as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
117 # Support unset when possible.
118 if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
125 $as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
126 $as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
127 $as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
128 $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
129 $as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
130 $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
131 $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
132 $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
135 # We need space, tab and new line, in precisely that order.
141 $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
144 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
145 # so uname gets run too.
146 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
153 ac_default_prefix=/usr/local
158 SHELL=${CONFIG_SHELL-/bin/sh}
160 # Maximum number of lines to put in a shell here document.
161 # This variable seems obsolete. It should probably be removed, and
162 # only ac_max_sed_lines should be used.
163 : ${ac_max_here_lines=38}
165 ac_unique_file="automake.in"
167 # Initialize some variables set by options.
169 ac_init_version=false
170 # The variables have the same names as the options, with
171 # dashes changed to underlines.
179 program_transform_name=s,x,x,
187 # Installation directory options.
188 # These are left unexpanded so users can "make install exec_prefix=/foo"
189 # and all the variables that are supposed to be based on exec_prefix
190 # by default will actually change.
191 # Use braces instead of parens because sh, perl, etc. also accept them.
192 bindir='${exec_prefix}/bin'
193 sbindir='${exec_prefix}/sbin'
194 libexecdir='${exec_prefix}/libexec'
195 datadir='${prefix}/share'
196 sysconfdir='${prefix}/etc'
197 sharedstatedir='${prefix}/com'
198 localstatedir='${prefix}/var'
199 libdir='${exec_prefix}/lib'
200 includedir='${prefix}/include'
201 oldincludedir='/usr/include'
202 infodir='${prefix}/info'
203 mandir='${prefix}/man'
205 # Identity of this package.
206 PACKAGE_NAME='GNU Automake'
207 PACKAGE_TARNAME='automake'
208 PACKAGE_VERSION='1.5a'
209 PACKAGE_STRING='GNU Automake 1.5a'
210 PACKAGE_BUGREPORT='bug-automake@gnu.org'
215 # If the previous option needs an argument, assign it.
216 if test -n "$ac_prev"; then
217 eval "$ac_prev=\$ac_option"
222 ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
224 # Accept the important Cygnus configure options, so we can diagnose typos.
228 -bindir | --bindir | --bindi | --bind | --bin | --bi)
230 -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
233 -build | --build | --buil | --bui | --bu)
234 ac_prev=build_alias ;;
235 -build=* | --build=* | --buil=* | --bui=* | --bu=*)
236 build_alias=$ac_optarg ;;
238 -cache-file | --cache-file | --cache-fil | --cache-fi \
239 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
240 ac_prev=cache_file ;;
241 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
242 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
243 cache_file=$ac_optarg ;;
246 cache_file=config.cache ;;
248 -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
250 -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
252 datadir=$ac_optarg ;;
254 -disable-* | --disable-*)
255 ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
256 # Reject names that are not valid shell variable names.
257 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
258 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
259 { (exit 1); exit 1; }; }
260 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
261 eval "enable_$ac_feature=no" ;;
263 -enable-* | --enable-*)
264 ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
265 # Reject names that are not valid shell variable names.
266 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
267 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
268 { (exit 1); exit 1; }; }
269 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
271 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
274 eval "enable_$ac_feature='$ac_optarg'" ;;
276 -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
277 | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
278 | --exec | --exe | --ex)
279 ac_prev=exec_prefix ;;
280 -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
281 | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
282 | --exec=* | --exe=* | --ex=*)
283 exec_prefix=$ac_optarg ;;
285 -gas | --gas | --ga | --g)
286 # Obsolete; use --with-gas.
289 -help | --help | --hel | --he | -h)
291 -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
292 ac_init_help=recursive ;;
293 -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
294 ac_init_help=short ;;
296 -host | --host | --hos | --ho)
297 ac_prev=host_alias ;;
298 -host=* | --host=* | --hos=* | --ho=*)
299 host_alias=$ac_optarg ;;
301 -includedir | --includedir | --includedi | --included | --include \
302 | --includ | --inclu | --incl | --inc)
303 ac_prev=includedir ;;
304 -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
305 | --includ=* | --inclu=* | --incl=* | --inc=*)
306 includedir=$ac_optarg ;;
308 -infodir | --infodir | --infodi | --infod | --info | --inf)
310 -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
311 infodir=$ac_optarg ;;
313 -libdir | --libdir | --libdi | --libd)
315 -libdir=* | --libdir=* | --libdi=* | --libd=*)
318 -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
319 | --libexe | --libex | --libe)
320 ac_prev=libexecdir ;;
321 -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
322 | --libexe=* | --libex=* | --libe=*)
323 libexecdir=$ac_optarg ;;
325 -localstatedir | --localstatedir | --localstatedi | --localstated \
326 | --localstate | --localstat | --localsta | --localst \
327 | --locals | --local | --loca | --loc | --lo)
328 ac_prev=localstatedir ;;
329 -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
330 | --localstate=* | --localstat=* | --localsta=* | --localst=* \
331 | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
332 localstatedir=$ac_optarg ;;
334 -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
336 -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
340 # Obsolete; use --without-fp.
343 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
347 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
348 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
351 -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
352 | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
353 | --oldin | --oldi | --old | --ol | --o)
354 ac_prev=oldincludedir ;;
355 -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
356 | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
357 | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
358 oldincludedir=$ac_optarg ;;
360 -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
362 -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
365 -program-prefix | --program-prefix | --program-prefi | --program-pref \
366 | --program-pre | --program-pr | --program-p)
367 ac_prev=program_prefix ;;
368 -program-prefix=* | --program-prefix=* | --program-prefi=* \
369 | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
370 program_prefix=$ac_optarg ;;
372 -program-suffix | --program-suffix | --program-suffi | --program-suff \
373 | --program-suf | --program-su | --program-s)
374 ac_prev=program_suffix ;;
375 -program-suffix=* | --program-suffix=* | --program-suffi=* \
376 | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
377 program_suffix=$ac_optarg ;;
379 -program-transform-name | --program-transform-name \
380 | --program-transform-nam | --program-transform-na \
381 | --program-transform-n | --program-transform- \
382 | --program-transform | --program-transfor \
383 | --program-transfo | --program-transf \
384 | --program-trans | --program-tran \
385 | --progr-tra | --program-tr | --program-t)
386 ac_prev=program_transform_name ;;
387 -program-transform-name=* | --program-transform-name=* \
388 | --program-transform-nam=* | --program-transform-na=* \
389 | --program-transform-n=* | --program-transform-=* \
390 | --program-transform=* | --program-transfor=* \
391 | --program-transfo=* | --program-transf=* \
392 | --program-trans=* | --program-tran=* \
393 | --progr-tra=* | --program-tr=* | --program-t=*)
394 program_transform_name=$ac_optarg ;;
396 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
397 | -silent | --silent | --silen | --sile | --sil)
400 -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
402 -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
404 sbindir=$ac_optarg ;;
406 -sharedstatedir | --sharedstatedir | --sharedstatedi \
407 | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
408 | --sharedst | --shareds | --shared | --share | --shar \
410 ac_prev=sharedstatedir ;;
411 -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
412 | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
413 | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
415 sharedstatedir=$ac_optarg ;;
417 -site | --site | --sit)
419 -site=* | --site=* | --sit=*)
422 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
424 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
427 -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
428 | --syscon | --sysco | --sysc | --sys | --sy)
429 ac_prev=sysconfdir ;;
430 -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
431 | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
432 sysconfdir=$ac_optarg ;;
434 -target | --target | --targe | --targ | --tar | --ta | --t)
435 ac_prev=target_alias ;;
436 -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
437 target_alias=$ac_optarg ;;
439 -v | -verbose | --verbose | --verbos | --verbo | --verb)
442 -version | --version | --versio | --versi | --vers | -V)
446 ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
447 # Reject names that are not valid shell variable names.
448 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
449 { echo "$as_me: error: invalid package name: $ac_package" >&2
450 { (exit 1); exit 1; }; }
451 ac_package=`echo $ac_package| sed 's/-/_/g'`
453 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
456 eval "with_$ac_package='$ac_optarg'" ;;
458 -without-* | --without-*)
459 ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
460 # Reject names that are not valid shell variable names.
461 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
462 { echo "$as_me: error: invalid package name: $ac_package" >&2
463 { (exit 1); exit 1; }; }
464 ac_package=`echo $ac_package | sed 's/-/_/g'`
465 eval "with_$ac_package=no" ;;
468 # Obsolete; use --with-x.
471 -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
472 | --x-incl | --x-inc | --x-in | --x-i)
473 ac_prev=x_includes ;;
474 -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
475 | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
476 x_includes=$ac_optarg ;;
478 -x-libraries | --x-libraries | --x-librarie | --x-librari \
479 | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
480 ac_prev=x_libraries ;;
481 -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
482 | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
483 x_libraries=$ac_optarg ;;
485 -*) { echo "$as_me: error: unrecognized option: $ac_option
486 Try \`$0 --help' for more information." >&2
487 { (exit 1); exit 1; }; }
491 ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
492 # Reject names that are not valid shell variable names.
493 expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
494 { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
495 { (exit 1); exit 1; }; }
496 ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
497 eval "$ac_envvar='$ac_optarg'"
501 # FIXME: should be removed in autoconf 3.0.
502 echo "$as_me: WARNING: you should use --build, --host, --target" >&2
503 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
504 echo "$as_me: WARNING: invalid host type: $ac_option" >&2
505 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
511 if test -n "$ac_prev"; then
512 ac_option=--`echo $ac_prev | sed 's/_/-/g'`
513 { echo "$as_me: error: missing argument to $ac_option" >&2
514 { (exit 1); exit 1; }; }
517 # Be sure to have absolute paths.
518 for ac_var in exec_prefix prefix
520 eval ac_val=$`echo $ac_var`
522 [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
523 *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
524 { (exit 1); exit 1; }; };;
528 # Be sure to have absolute paths.
529 for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
530 localstatedir libdir includedir oldincludedir infodir mandir
532 eval ac_val=$`echo $ac_var`
534 [\\/$]* | ?:[\\/]* ) ;;
535 *) { echo "$as_me: error: expected an absolute path for --$ac_var: $ac_val" >&2
536 { (exit 1); exit 1; }; };;
540 # There might be people who depend on the old broken behavior: `$host'
541 # used to hold the argument of --host etc.
546 # FIXME: should be removed in autoconf 3.0.
547 if test "x$host_alias" != x; then
548 if test "x$build_alias" = x; then
549 cross_compiling=maybe
550 echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
551 If a cross compiler is detected then cross compile mode will be used." >&2
552 elif test "x$build_alias" != "x$host_alias"; then
558 test -n "$host_alias" && ac_tool_prefix=$host_alias-
560 test "$silent" = yes && exec 6>/dev/null
562 # Find the source files, if location was not specified.
563 if test -z "$srcdir"; then
564 ac_srcdir_defaulted=yes
565 # Try the directory containing this script, then its parent.
567 ac_confdir=`echo "$ac_prog" | sed 's%[\\/][^\\/][^\\/]*$%%'`
568 test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
570 if test ! -r $srcdir/$ac_unique_file; then
574 ac_srcdir_defaulted=no
576 if test ! -r $srcdir/$ac_unique_file; then
577 if test "$ac_srcdir_defaulted" = yes; then
578 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
579 { (exit 1); exit 1; }; }
581 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
582 { (exit 1); exit 1; }; }
585 srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
586 ac_env_build_alias_set=${build_alias+set}
587 ac_env_build_alias_value=$build_alias
588 ac_cv_env_build_alias_set=${build_alias+set}
589 ac_cv_env_build_alias_value=$build_alias
590 ac_env_host_alias_set=${host_alias+set}
591 ac_env_host_alias_value=$host_alias
592 ac_cv_env_host_alias_set=${host_alias+set}
593 ac_cv_env_host_alias_value=$host_alias
594 ac_env_target_alias_set=${target_alias+set}
595 ac_env_target_alias_value=$target_alias
596 ac_cv_env_target_alias_set=${target_alias+set}
597 ac_cv_env_target_alias_value=$target_alias
600 # Report the --help message.
602 if test "$ac_init_help" = "long"; then
603 # Omit some internal or obsolete options to make the list less imposing.
604 # This message is too long to be a string in the A/UX 3.1 sh.
606 \`configure' configures GNU Automake 1.5a to adapt to many kinds of systems.
608 Usage: $0 [OPTION]... [VAR=VALUE]...
610 To assign environment variables (e.g., CC, CFLAGS...), specify them as
611 VAR=VALUE. See below for descriptions of some of the useful variables.
613 Defaults for the options are specified in brackets.
616 -h, --help display this help and exit
617 --help=short display options specific to this package
618 --help=recursive display the short help of all the included packages
619 -V, --version display version information and exit
620 -q, --quiet, --silent do not print \`checking...' messages
621 --cache-file=FILE cache test results in FILE [disabled]
622 -C, --config-cache alias for \`--cache-file=config.cache'
623 -n, --no-create do not create output files
624 --srcdir=DIR find the sources in DIR [configure dir or \`..']
629 Installation directories:
630 --prefix=PREFIX install architecture-independent files in PREFIX
632 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
635 By default, \`make install' will install all the files in
636 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
637 an installation prefix other than \`$ac_default_prefix' using \`--prefix',
638 for instance \`--prefix=\$HOME'.
640 For better control, use the options below.
642 Fine tuning of the installation directories:
643 --bindir=DIR user executables [EPREFIX/bin]
644 --sbindir=DIR system admin executables [EPREFIX/sbin]
645 --libexecdir=DIR program executables [EPREFIX/libexec]
646 --datadir=DIR read-only architecture-independent data [PREFIX/share]
647 --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
648 --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
649 --localstatedir=DIR modifiable single-machine data [PREFIX/var]
650 --libdir=DIR object code libraries [EPREFIX/lib]
651 --includedir=DIR C header files [PREFIX/include]
652 --oldincludedir=DIR C header files for non-gcc [/usr/include]
653 --infodir=DIR info documentation [PREFIX/info]
654 --mandir=DIR man documentation [PREFIX/man]
660 --program-prefix=PREFIX prepend PREFIX to installed program names
661 --program-suffix=SUFFIX append SUFFIX to installed program names
662 --program-transform-name=PROGRAM run sed PROGRAM on installed program names
666 if test -n "$ac_init_help"; then
667 case $ac_init_help in
668 short | recursive ) echo "Configuration of GNU Automake 1.5a:";;
673 --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
674 --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
675 --disable-dependency-tracking Speeds up one-time builds
676 --enable-dependency-tracking Do not reject slow dependency extractors
678 Report bugs to <bug-automake@gnu.org>.
682 if test "$ac_init_help" = "recursive"; then
683 # If there are subdirs, report their specific --help.
685 for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
687 if test "$ac_dir" != .; then
688 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
689 # A "../" for each directory in $ac_dir_suffix.
690 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
692 ac_dir_suffix= ac_top_builddir=
696 .) # No --srcdir option. We are building in place.
698 if test -z "$ac_top_builddir"; then
701 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
703 [\\/]* | ?:[\\/]* ) # Absolute path.
704 ac_srcdir=$srcdir$ac_dir_suffix;
705 ac_top_srcdir=$srcdir ;;
707 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
708 ac_top_srcdir=$ac_top_builddir$srcdir ;;
711 # Check for guested configure; otherwise get Cygnus style configure.
712 if test -f $ac_srcdir/configure.gnu; then
714 $SHELL $ac_srcdir/configure.gnu --help=recursive
715 elif test -f $ac_srcdir/configure; then
717 $SHELL $ac_srcdir/configure --help=recursive
718 elif test -f $ac_srcdir/configure.ac ||
719 test -f $ac_srcdir/configure.in; then
723 echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
729 test -n "$ac_init_help" && exit 0
730 if $ac_init_version; then
732 GNU Automake configure 1.5a
733 generated by GNU Autoconf 2.52e
735 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
736 Free Software Foundation, Inc.
737 This configure script is free software; the Free Software Foundation
738 gives unlimited permission to copy, distribute and modify it.
744 This file contains any messages produced by compilers while
745 running configure, to aid debugging if configure makes a mistake.
747 It was created by GNU Automake $as_me 1.5a, which was
748 generated by GNU Autoconf 2.52e. Invocation command line was
759 hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
760 uname -m = `(uname -m) 2>/dev/null || echo unknown`
761 uname -r = `(uname -r) 2>/dev/null || echo unknown`
762 uname -s = `(uname -s) 2>/dev/null || echo unknown`
763 uname -v = `(uname -v) 2>/dev/null || echo unknown`
765 /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
766 /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
768 /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
769 /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
770 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
771 hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
772 /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
773 /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
774 /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
778 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
782 test -z "$as_dir" && as_dir=.
796 # Keep a trace of the command line.
797 # Strip out --no-create and --no-recursion so they do not pile up.
798 # Also quote any args containing shell meta-characters.
804 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
805 | --no-cr | --no-c) ;;
806 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
807 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
808 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
809 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"`
810 ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
812 *) ac_configure_args="$ac_configure_args$ac_sep$ac_arg"
815 # Get rid of the leading space.
818 # When interrupted or exit'd, cleanup temporary files, and complete
819 # config.log. We remove comments because anyway the quotes in there
820 # would cause problems or look ugly.
821 # WARNING: Be sure not to use single quotes in there, as some shells,
822 # such as our DU 5.0 friend, will then `close' the trap.
824 # Save into config.log some information that might help in debugging.
828 ## ---------------- ##
829 ## Cache variables. ##
830 ## ---------------- ##
833 # The following way of writing the cache mishandles newlines in values,
836 case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
839 "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
840 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
844 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
849 if test -s confdefs.h; then
856 sed "/^$/d" confdefs.h
859 test "$ac_signal" != 0 &&
860 echo "$as_me: caught signal $ac_signal"
861 echo "$as_me: exit $exit_status"
863 rm -rf conftest* confdefs* core core.* *.core conf$$* $ac_clean_files &&
866 for ac_signal in 1 2 13 15; do
867 trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
871 # confdefs.h avoids OS command line length limits that DEFS can exceed.
872 rm -rf conftest* confdefs.h
873 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
876 # Let the site file select an alternate cache file if it wants to.
877 # Prefer explicitly selected file to automatically selected ones.
878 if test -z "$CONFIG_SITE"; then
879 if test "x$prefix" != xNONE; then
880 CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
882 CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
885 for ac_site_file in $CONFIG_SITE; do
886 if test -r "$ac_site_file"; then
887 { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
888 echo "$as_me: loading site script $ac_site_file" >&6;}
889 sed 's/^/| /' "$ac_site_file" >&5
894 if test -r "$cache_file"; then
895 # Some versions of bash will fail to source /dev/null (special
896 # files actually), so we avoid doing that.
897 if test -f "$cache_file"; then
898 { echo "$as_me:$LINENO: loading cache $cache_file" >&5
899 echo "$as_me: loading cache $cache_file" >&6;}
901 [\\/]* | ?:[\\/]* ) . $cache_file;;
906 { echo "$as_me:$LINENO: creating cache $cache_file" >&5
907 echo "$as_me: creating cache $cache_file" >&6;}
911 # Check that the precious variables saved in the cache have kept the same
913 ac_cache_corrupted=false
914 for ac_var in `(set) 2>&1 |
915 sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
916 eval ac_old_set=\$ac_cv_env_${ac_var}_set
917 eval ac_new_set=\$ac_env_${ac_var}_set
918 eval ac_old_val="\$ac_cv_env_${ac_var}_value"
919 eval ac_new_val="\$ac_env_${ac_var}_value"
920 case $ac_old_set,$ac_new_set in
922 { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
923 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
924 ac_cache_corrupted=: ;;
926 { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
927 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
928 ac_cache_corrupted=: ;;
931 if test "x$ac_old_val" != "x$ac_new_val"; then
932 { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
933 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
934 { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
935 echo "$as_me: former value: $ac_old_val" >&2;}
936 { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
937 echo "$as_me: current value: $ac_new_val" >&2;}
941 # Pass precious variables to config.status. It doesn't matter if
942 # we pass some twice (in addition to the command line arguments).
943 if test "$ac_new_set" = set; then
945 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
946 ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"`
947 ac_configure_args="$ac_configure_args '$ac_arg'"
949 *) ac_configure_args="$ac_configure_args $ac_var=$ac_new_val"
954 if $ac_cache_corrupted; then
955 { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
956 echo "$as_me: error: changes in the environment can compromise the build" >&2;}
957 { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
958 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
959 { (exit 1); exit 1; }; }
963 ac_cpp='$CPP $CPPFLAGS'
964 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
965 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
966 ac_compiler_gnu=$ac_cv_c_compiler_gnu
969 for ac_dir in lib $srcdir/lib; do
970 if test -f $ac_dir/install-sh; then
972 ac_install_sh="$ac_aux_dir/install-sh -c"
974 elif test -f $ac_dir/install.sh; then
976 ac_install_sh="$ac_aux_dir/install.sh -c"
978 elif test -f $ac_dir/shtool; then
980 ac_install_sh="$ac_aux_dir/shtool install -c"
984 if test -z "$ac_aux_dir"; then
985 { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in lib $srcdir/lib" >&5
986 echo "$as_me: error: cannot find install-sh or install.sh in lib $srcdir/lib" >&2;}
987 { (exit 1); exit 1; }; }
989 ac_config_guess="$SHELL $ac_aux_dir/config.guess"
990 ac_config_sub="$SHELL $ac_aux_dir/config.sub"
991 ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
993 # Find a good install program. We prefer a C program (faster),
994 # so one script is as good as another. But avoid the broken or
995 # incompatible versions:
996 # SysV /etc/install, /usr/sbin/install
997 # SunOS /usr/etc/install
1000 # AmigaOS /C/install, which installs bootblocks on floppy discs
1001 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1002 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
1003 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1004 # ./install, which can be erroneously created by make from ./install.sh.
1005 echo "$as_me:$LINENO: checking for a BSD compatible install" >&5
1006 echo $ECHO_N "checking for a BSD compatible install... $ECHO_C" >&6
1007 if test -z "$INSTALL"; then
1008 if test "${ac_cv_path_install+set}" = set; then
1009 echo $ECHO_N "(cached) $ECHO_C" >&6
1011 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1015 test -z "$as_dir" && as_dir=.
1016 # Account for people who put trailing slashes in PATH elements.
1018 ./ | .// | /cC/* | \
1019 /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
1022 # OSF1 and SCO ODT 3.0 have their own names for install.
1023 # Don't use installbsd from OSF since it installs stuff as root
1025 for ac_prog in ginstall scoinst install; do
1026 for ac_exec_ext in '' $ac_executable_extensions; do
1027 if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1028 if test $ac_prog = install &&
1029 grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1030 # AIX install. It has an incompatible calling convention.
1032 elif test $ac_prog = install &&
1033 grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1034 # program-specific install script used by HP pwplus--don't use.
1037 ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
1048 if test "${ac_cv_path_install+set}" = set; then
1049 INSTALL=$ac_cv_path_install
1051 # As a last resort, use the slow shell script. We don't cache a
1052 # path for INSTALL within a source directory, because that will
1053 # break other packages using the cache if that directory is
1054 # removed, or if the path is relative.
1055 INSTALL=$ac_install_sh
1058 echo "$as_me:$LINENO: result: $INSTALL" >&5
1059 echo "${ECHO_T}$INSTALL" >&6
1061 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1062 # It thinks the first close brace ends the variable substitution.
1063 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
1065 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
1067 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1069 echo "$as_me:$LINENO: checking whether build environment is sane" >&5
1070 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
1073 echo timestamp > conftest.file
1074 # Do `set' in a subshell so we don't clobber the current shell's
1075 # arguments. Must try -L first in case configure is actually a
1076 # symlink; some systems play weird games with the mod time of symlinks
1077 # (eg FreeBSD returns the mod time of the symlink's containing
1080 set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
1081 if test "$*" = "X"; then
1083 set X `ls -t $srcdir/configure conftest.file`
1086 if test "$*" != "X $srcdir/configure conftest.file" \
1087 && test "$*" != "X conftest.file $srcdir/configure"; then
1089 # If neither matched, then we have a broken ls. This can happen
1090 # if, for instance, CONFIG_SHELL is bash and it inherits a
1091 # broken ls alias from the environment. This has actually
1092 # happened. Such a system could not be considered "sane".
1093 { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
1094 alias in your environment" >&5
1095 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
1096 alias in your environment" >&2;}
1097 { (exit 1); exit 1; }; }
1100 test "$2" = conftest.file
1106 { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
1107 Check your system clock" >&5
1108 echo "$as_me: error: newly created file is older than distributed files!
1109 Check your system clock" >&2;}
1110 { (exit 1); exit 1; }; }
1112 echo "$as_me:$LINENO: result: yes" >&5
1113 echo "${ECHO_T}yes" >&6
1114 test "$program_prefix" != NONE &&
1115 program_transform_name="s,^,$program_prefix,;$program_transform_name"
1116 # Use a double $ so make ignores it.
1117 test "$program_suffix" != NONE &&
1118 program_transform_name="s,\$,$program_suffix,;$program_transform_name"
1119 # Double any \ or $. echo might interpret backslashes.
1120 # By default was `s,x,x', remove it if useless.
1121 cat <<\_ACEOF >conftest.sed
1122 s/[\\$]/&&/g;s/;s,x,x,$//
1124 program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
1127 # expand $ac_aux_dir to an absolute path
1128 am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
1130 test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
1131 # Use eval to expand $SHELL
1132 if eval "$MISSING --run true"; then
1133 am_missing_run="$MISSING --run "
1137 { echo "$as_me:$LINENO: WARNING: ${am_backtick}missing' script is too old or missing" >&5
1138 echo "$as_me: WARNING: ${am_backtick}missing' script is too old or missing" >&2;}
1141 for ac_prog in mawk gawk nawk awk
1143 # Extract the first word of "$ac_prog", so it can be a program name with args.
1144 set dummy $ac_prog; ac_word=$2
1145 echo "$as_me:$LINENO: checking for $ac_word" >&5
1146 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1147 if test "${ac_cv_prog_AWK+set}" = set; then
1148 echo $ECHO_N "(cached) $ECHO_C" >&6
1150 if test -n "$AWK"; then
1151 ac_cv_prog_AWK="$AWK" # Let the user override the test.
1153 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1157 test -z "$as_dir" && as_dir=.
1158 for ac_exec_ext in '' $ac_executable_extensions; do
1159 if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1160 ac_cv_prog_AWK="$ac_prog"
1161 echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1170 if test -n "$AWK"; then
1171 echo "$as_me:$LINENO: result: $AWK" >&5
1172 echo "${ECHO_T}$AWK" >&6
1174 echo "$as_me:$LINENO: result: no" >&5
1175 echo "${ECHO_T}no" >&6
1178 test -n "$AWK" && break
1181 echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
1182 echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
1183 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
1184 if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
1185 echo $ECHO_N "(cached) $ECHO_C" >&6
1187 cat >conftest.make <<\_ACEOF
1189 @echo 'ac_maketemp="${MAKE}"'
1191 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
1192 eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
1193 if test -n "$ac_maketemp"; then
1194 eval ac_cv_prog_make_${ac_make}_set=yes
1196 eval ac_cv_prog_make_${ac_make}_set=no
1200 if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
1201 echo "$as_me:$LINENO: result: yes" >&5
1202 echo "${ECHO_T}yes" >&6
1205 echo "$as_me:$LINENO: result: no" >&5
1206 echo "${ECHO_T}no" >&6
1207 SET_MAKE="MAKE=${MAKE-make}"
1210 # Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
1211 if test "${enable_dependency_tracking+set}" = set; then
1212 enableval="$enable_dependency_tracking"
1215 if test "x$enable_dependency_tracking" != xno; then
1216 am_depcomp="$ac_aux_dir/depcomp"
1220 if test "x$enable_dependency_tracking" != xno; then
1228 rm -f .deps 2>/dev/null
1229 mkdir .deps 2>/dev/null
1230 if test -d .deps; then
1233 # MS-DOS does not allow filenames that begin with a dot.
1236 rmdir .deps 2>/dev/null
1238 # test to see if srcdir already configured
1239 if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
1240 test -f $srcdir/config.status; then
1241 { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
1242 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
1243 { (exit 1); exit 1; }; }
1246 # Define the identity of the package.
1250 cat >>confdefs.h <<_ACEOF
1251 #define PACKAGE "$PACKAGE"
1254 cat >>confdefs.h <<_ACEOF
1255 #define VERSION "$VERSION"
1258 # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
1259 # the ones we care about.
1261 # Autoconf 2.50 always computes EXEEXT. However we need to be
1262 # compatible with 2.13, for now. So we always define EXEEXT, but we
1265 # Similar for OBJEXT -- only we only use OBJEXT if the user actually
1266 # requests that it be used. This is a bit dumb.
1269 # Some tools Automake needs.
1271 ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal"}
1273 AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
1275 AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake"}
1277 AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
1279 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
1281 AMTAR=${AMTAR-"${am_missing_run}tar"}
1283 install_sh=${install_sh-"$am_aux_dir/install-sh"}
1285 INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
1287 # We need awk for the "check" target. The system "awk" is bad on
1290 ACLOCAL="`pwd`/aclocal --acdir=m4"
1291 # $AUTOMAKE is always run after a `cd $top_srcdir', hence `.' is really
1292 # what we want for perllibdir and libdir.
1293 AUTOMAKE="perllibdir=./lib `pwd`/automake --libdir=lib"
1295 # Extract the first word of "perl", so it can be a program name with args.
1296 set dummy perl; ac_word=$2
1297 echo "$as_me:$LINENO: checking for $ac_word" >&5
1298 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
1299 if test "${ac_cv_path_PERL+set}" = set; then
1300 echo $ECHO_N "(cached) $ECHO_C" >&6
1304 ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
1307 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1311 test -z "$as_dir" && as_dir=.
1312 for ac_exec_ext in '' $ac_executable_extensions; do
1313 if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
1314 ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
1315 echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
1324 PERL=$ac_cv_path_PERL
1326 if test -n "$PERL"; then
1327 echo "$as_me:$LINENO: result: $PERL" >&5
1328 echo "${ECHO_T}$PERL" >&6
1330 echo "$as_me:$LINENO: result: no" >&5
1331 echo "${ECHO_T}no" >&6
1334 if test -z "$PERL"; then
1335 { { echo "$as_me:$LINENO: error: perl not found" >&5
1336 echo "$as_me: error: perl not found" >&2;}
1337 { (exit 1); exit 1; }; }
1339 $PERL -e 'require 5.005;' || {
1340 { { echo "$as_me:$LINENO: error: perl 5.005 or better is required" >&5
1341 echo "$as_me: error: perl 5.005 or better is required" >&2;}
1342 { (exit 1); exit 1; }; }
1345 ac_config_files="$ac_config_files automake"
1347 ac_config_files="$ac_config_files aclocal"
1349 ac_config_files="$ac_config_files Makefile lib/Makefile lib/Automake/Makefile lib/am/Makefile m4/Makefile tests/Makefile"
1350 cat >confcache <<\_ACEOF
1351 # This file is a shell script that caches the results of configure
1352 # tests run on this system so they can be shared between configure
1353 # scripts and configure runs, see configure's option --config-cache.
1354 # It is not useful on other systems. If it contains results you don't
1355 # want to keep, you may remove or edit it.
1357 # config.status only pays attention to the cache file if you give it
1358 # the --recheck option to rerun configure.
1360 # `ac_cv_env_foo' variables (set or unset) will be overriden when
1361 # loading this file, other *unset* `ac_cv_foo' will be assigned the
1366 # The following way of writing the cache mishandles newlines in values,
1367 # but we know of no workaround that is simple, portable, and efficient.
1368 # So, don't put newlines in cache variables' values.
1369 # Ultrix sh set writes to stderr and can't be redirected directly,
1370 # and sets the high bit in the cache file unless we assign to the vars.
1373 case `(ac_space=' '; set | grep ac_space) 2>&1` in
1375 # `set' does not quote correctly, so add quotes (double-quote
1376 # substitution turns \\\\ into \\, and sed turns \\ into \).
1379 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1382 # `set' quotes correctly as required by POSIX, so do not add quotes.
1384 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1391 s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1393 /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1395 if cmp -s $cache_file confcache; then :; else
1396 if test -w $cache_file; then
1397 test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
1398 cat confcache >$cache_file
1400 echo "not updating unwritable cache $cache_file"
1405 test "x$prefix" = xNONE && prefix=$ac_default_prefix
1406 # Let make expand exec_prefix.
1407 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1409 # VPATH may cause trouble with some makes, so we remove $(srcdir),
1410 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1411 # trailing colons and then remove the whole line if VPATH becomes empty
1412 # (actually we leave an empty line to preserve line numbers).
1413 if test "x$srcdir" = x.; then
1414 ac_vpsub='/^[ ]*VPATH[ ]*=/{
1415 s/:*\$(srcdir):*/:/;
1416 s/:*\${srcdir}:*/:/;
1418 s/^\([^=]*=[ ]*\):*/\1/;
1424 # Transform confdefs.h into DEFS.
1425 # Protect against shell expansion while executing Makefile rules.
1426 # Protect against Makefile macro expansion.
1428 # If the first sed substitution is executed (which looks for macros that
1429 # take arguments), then we branch to the quote section. Otherwise,
1430 # look for a macro that doesn't take arguments.
1431 cat >confdef2opt.sed <<\_ACEOF
1434 s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
1436 s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
1440 s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
1446 # We use echo to avoid assuming a particular line-breaking character.
1447 # The extra dot is to prevent the shell from consuming trailing
1448 # line-breaks from the sub-command output. A line-break within
1449 # single-quotes doesn't work because, if this script is created in a
1450 # platform that uses two characters for line-breaks (e.g., DOS), tr
1452 ac_LF_and_DOT=`echo; echo .`
1453 DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
1454 rm -f confdef2opt.sed
1456 : ${CONFIG_STATUS=./config.status}
1457 ac_clean_files_save=$ac_clean_files
1458 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
1459 { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
1460 echo "$as_me: creating $CONFIG_STATUS" >&6;}
1461 cat >$CONFIG_STATUS <<_ACEOF
1463 # Generated automatically by $as_me.
1464 # Run this file to recreate the current configuration.
1465 # Compiler output produced by configure, useful for debugging
1466 # configure, is in config.log if it exists.
1469 SHELL=\${CONFIG_SHELL-$SHELL}
1472 cat >>$CONFIG_STATUS <<\_ACEOF
1474 ## --------------------- ##
1475 ## M4sh Initialization. ##
1476 ## --------------------- ##
1478 # Be Bourne compatible
1479 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1482 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1486 # Name of the executable.
1487 as_me=`echo "$0" |sed 's,\(.*[\\/]\+\)\?\([^\\/]\+\)[\\/]*,\2,'`
1489 # If LINENO is not supported by the shell, produce a version of this
1490 # script where LINENO is hard coded. Rewrite if not up to date only.
1491 # Comparing LINENO against _oline_ is not a good solution, since in
1492 # the case of embedded executables (such as config.status within
1493 # configure) you'd compare LINENO wrt config.status vs. _oline_ vs
1494 # configure. Hence a useless rewrite (not to mention the risk of
1495 # ``infinite'' rewrites. Merely check that LINENO is incremented
1496 # between two lines, which is a property guaranteed for _oline_, hence
1497 # it protects us from repetitive rewrites.
1500 # Compute as_lineno_1 in two steps: some shells restart LINENO for
1502 as_lineno_1=`(expr $as_lineno_1 + 1) 2>/dev/null`
1503 if test "x$as_lineno_1" != "x$as_lineno_2"; then
1504 if test ! -f $as_me.lineno ||
1505 test x`ls -1dt $as_me.lineno $as_me 2>/dev/null | sed 1q` \
1506 != x$as_me.lineno; then
1507 # Be sure to write the pattern so that it doesn't replace itself:
1508 # it must not match itself.
1510 if ($0 ~ /[$]LINENO/)
1511 while (sub (/[$]LINENO/, NR))
1514 }' <$as_me >$as_me.lineno
1515 chmod +x $as_me.lineno
1517 exec ${SHELL-/bin/sh} ./$as_me.lineno
1520 # Avoid depending upon Character Ranges.
1521 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1522 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1523 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1524 as_cr_digits='0123456789'
1525 as_cr_alnum=$as_cr_Letters$as_cr_digits
1527 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1528 *c*,-n*) ECHO_N= ECHO_C='
1530 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1531 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1534 if expr a : '\(a\)' >/dev/null 2>&1; then
1540 rm -f conf$$ conf$$.exe conf$$.file
1542 if ln -s conf$$.file conf$$ 2>/dev/null; then
1543 # We could just check for DJGPP; but this test a) works b) is more generic
1544 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1545 if test -f conf$$.exe; then
1546 # Don't use ln at all; we don't have any links
1551 elif ln conf$$.file conf$$ 2>/dev/null; then
1556 rm -f conf$$ conf$$.exe conf$$.file
1558 # The user is always right.
1559 if test "${PATH_SEPARATOR+set}" != set; then
1560 echo "#! $SHELL" >conftest.sh
1561 echo "exit 0" >>conftest.sh
1562 chmod +x conftest.sh
1563 if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
1571 as_executable_p="test -f"
1573 # Sed expression to map a string onto a valid CPP name.
1574 as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
1576 # Sed expression to map a string onto a valid variable name.
1577 as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
1579 # Support unset when possible.
1580 if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
1587 $as_unset LANG || test "${LANG+set}" != set || { LANG=C; export LANG; }
1588 $as_unset LC_ALL || test "${LC_ALL+set}" != set || { LC_ALL=C; export LC_ALL; }
1589 $as_unset LC_TIME || test "${LC_TIME+set}" != set || { LC_TIME=C; export LC_TIME; }
1590 $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set || { LC_CTYPE=C; export LC_CTYPE; }
1591 $as_unset LANGUAGE || test "${LANGUAGE+set}" != set || { LANGUAGE=C; export LANGUAGE; }
1592 $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set || { LC_COLLATE=C; export LC_COLLATE; }
1593 $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set || { LC_NUMERIC=C; export LC_NUMERIC; }
1594 $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set || { LC_MESSAGES=C; export LC_MESSAGES; }
1597 # We need space, tab and new line, in precisely that order.
1603 $as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
1607 # Open the log real soon, to keep \$[0] and so on meaningful, and to
1608 # report actual input values of CONFIG_FILES etc. instead of their
1609 # values after options handling. Logging --version etc. is OK.
1613 sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1614 ## Running \$as_me. ##
1619 This file was extended by GNU Automake $as_me 1.5a, which was
1620 generated by GNU Autoconf 2.52e. Invocation command line was
1622 CONFIG_FILES = $CONFIG_FILES
1623 CONFIG_HEADERS = $CONFIG_HEADERS
1624 CONFIG_LINKS = $CONFIG_LINKS
1625 CONFIG_COMMANDS = $CONFIG_COMMANDS
1629 echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
1633 # Files that config.status was made for.
1634 if test -n "$ac_config_files"; then
1635 echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
1638 if test -n "$ac_config_headers"; then
1639 echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
1642 if test -n "$ac_config_links"; then
1643 echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
1646 if test -n "$ac_config_commands"; then
1647 echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
1650 cat >>$CONFIG_STATUS <<\_ACEOF
1653 \`$as_me' instantiates files from templates according to the
1654 current configuration.
1656 Usage: $0 [OPTIONS] [FILE]...
1658 -h, --help print this help, then exit
1659 -V, --version print version number, then exit
1660 -d, --debug don't remove temporary files
1661 --recheck update $as_me by reconfiguring in the same conditions
1662 --file=FILE[:TEMPLATE]
1663 instantiate the configuration file FILE
1665 Configuration files:
1668 Report bugs to <bug-autoconf@gnu.org>."
1671 cat >>$CONFIG_STATUS <<_ACEOF
1673 GNU Automake config.status 1.5a
1674 configured by $0, generated by GNU Autoconf 2.52e,
1675 with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
1677 Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
1678 Free Software Foundation, Inc.
1679 This config.status script is free software; the Free Software Foundation
1680 gives unlimited permission to copy, distribute and modify it."
1685 cat >>$CONFIG_STATUS <<\_ACEOF
1686 # If no file are specified by the user, then we need to provide default
1687 # value. By we need to know if files were specified by the user.
1693 ac_option=`expr "x$1" : 'x\([^=]*\)='`
1694 ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
1696 set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
1700 *) # This is not an option, so the user has probably given explicit
1702 ac_need_defaults=false;;
1706 # Handling of the options.
1708 cat >>$CONFIG_STATUS <<_ACEOF
1709 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
1710 echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
1711 exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
1713 cat >>$CONFIG_STATUS <<\_ACEOF
1714 --version | --vers* | -V )
1715 echo "$ac_cs_version"; exit 0 ;;
1717 # Conflict between --help and --header
1718 { { echo "$as_me:$LINENO: error: ambiguous option: $1
1719 Try \`$0 --help' for more information." >&5
1720 echo "$as_me: error: ambiguous option: $1
1721 Try \`$0 --help' for more information." >&2;}
1722 { (exit 1); exit 1; }; };;
1723 --help | --hel | -h )
1724 echo "$ac_cs_usage"; exit 0 ;;
1725 --debug | --d* | -d )
1727 --file | --fil | --fi | --f )
1729 CONFIG_FILES="$CONFIG_FILES $1"
1730 ac_need_defaults=false;;
1731 --header | --heade | --head | --hea )
1733 CONFIG_HEADERS="$CONFIG_HEADERS $1"
1734 ac_need_defaults=false;;
1737 -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
1738 Try \`$0 --help' for more information." >&5
1739 echo "$as_me: error: unrecognized option: $1
1740 Try \`$0 --help' for more information." >&2;}
1741 { (exit 1); exit 1; }; } ;;
1743 *) ac_config_targets="$ac_config_targets $1" ;;
1751 cat >>$CONFIG_STATUS <<\_ACEOF
1752 for ac_config_target in $ac_config_targets
1754 case "$ac_config_target" in
1755 # Handling of arguments.
1756 "automake" ) CONFIG_FILES="$CONFIG_FILES automake" ;;
1757 "aclocal" ) CONFIG_FILES="$CONFIG_FILES aclocal" ;;
1758 "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
1759 "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
1760 "lib/Automake/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Automake/Makefile" ;;
1761 "lib/am/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/am/Makefile" ;;
1762 "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
1763 "tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
1764 *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
1765 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
1766 { (exit 1); exit 1; }; };;
1770 # If the user did not use the arguments to specify the items to instantiate,
1771 # then the envvar interface is used. Set only those that are not.
1772 # We use the long form for the default assignment because of an extremely
1773 # bizarre bug on SunOS 4.1.3.
1774 if $ac_need_defaults; then
1775 test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
1778 # Create a temporary directory, and hook for its removal unless debugging.
1781 trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
1782 trap '{ (exit 1); exit 1; }' 1 2 13 15
1785 # Create a (secure) tmp directory for tmp files.
1788 tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
1789 test -n "$tmp" && test -d "$tmp"
1792 tmp=$TMPDIR/cs$$-$RANDOM
1793 (umask 077 && mkdir $tmp)
1796 echo "$me: cannot create a temporary directory in $TMPDIR" >&2
1797 { (exit 1); exit 1; }
1802 cat >>$CONFIG_STATUS <<_ACEOF
1805 # CONFIG_FILES section.
1808 # No need to generate the scripts if there are no CONFIG_FILES.
1809 # This happens for instance when ./config.status config.h
1810 if test -n "\$CONFIG_FILES"; then
1811 # Protect against being on the right side of a sed subst in config.status.
1812 sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
1813 s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
1814 s,@SHELL@,$SHELL,;t t
1815 s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
1816 s,@exec_prefix@,$exec_prefix,;t t
1817 s,@prefix@,$prefix,;t t
1818 s,@program_transform_name@,$program_transform_name,;t t
1819 s,@bindir@,$bindir,;t t
1820 s,@sbindir@,$sbindir,;t t
1821 s,@libexecdir@,$libexecdir,;t t
1822 s,@datadir@,$datadir,;t t
1823 s,@sysconfdir@,$sysconfdir,;t t
1824 s,@sharedstatedir@,$sharedstatedir,;t t
1825 s,@localstatedir@,$localstatedir,;t t
1826 s,@libdir@,$libdir,;t t
1827 s,@includedir@,$includedir,;t t
1828 s,@oldincludedir@,$oldincludedir,;t t
1829 s,@infodir@,$infodir,;t t
1830 s,@mandir@,$mandir,;t t
1831 s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
1832 s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
1833 s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
1834 s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
1835 s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
1836 s,@build_alias@,$build_alias,;t t
1837 s,@host_alias@,$host_alias,;t t
1838 s,@target_alias@,$target_alias,;t t
1840 s,@ECHO_C@,$ECHO_C,;t t
1841 s,@ECHO_N@,$ECHO_N,;t t
1842 s,@ECHO_T@,$ECHO_T,;t t
1844 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
1845 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
1846 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
1847 s,@PACKAGE@,$PACKAGE,;t t
1848 s,@VERSION@,$VERSION,;t t
1849 s,@EXEEXT@,$EXEEXT,;t t
1850 s,@OBJEXT@,$OBJEXT,;t t
1851 s,@ACLOCAL@,$ACLOCAL,;t t
1852 s,@AUTOCONF@,$AUTOCONF,;t t
1853 s,@AUTOMAKE@,$AUTOMAKE,;t t
1854 s,@AUTOHEADER@,$AUTOHEADER,;t t
1855 s,@MAKEINFO@,$MAKEINFO,;t t
1856 s,@AMTAR@,$AMTAR,;t t
1857 s,@install_sh@,$install_sh,;t t
1858 s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
1860 s,@SET_MAKE@,$SET_MAKE,;t t
1861 s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
1862 s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
1863 s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
1864 s,@DEPDIR@,$DEPDIR,;t t
1870 cat >>$CONFIG_STATUS <<\_ACEOF
1871 # Split the substitutions into bite-sized pieces for seds with
1872 # small command number limits, like on Digital OSF/1 and HP-UX.
1874 ac_sed_frag=1 # Number of current file.
1875 ac_beg=1 # First line for current file.
1876 ac_end=$ac_max_sed_lines # Line after last line for current file.
1879 while $ac_more_lines; do
1880 if test $ac_beg -gt 1; then
1881 sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
1883 sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
1885 if test ! -s $tmp/subs.frag; then
1888 # The purpose of the label and of the branching condition is to
1889 # speed up the sed processing (if there are no `@' at all, there
1890 # is no need to browse any of the substitutions).
1891 # These are the two extra sed commands mentioned above.
1893 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
1894 if test -z "$ac_sed_cmds"; then
1895 ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
1897 ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
1899 ac_sed_frag=`expr $ac_sed_frag + 1`
1901 ac_end=`expr $ac_end + $ac_max_sed_lines`
1904 if test -z "$ac_sed_cmds"; then
1907 fi # test -n "$CONFIG_FILES"
1910 cat >>$CONFIG_STATUS <<\_ACEOF
1911 for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
1912 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
1914 - | *:- | *:-:* ) # input from stdin
1916 ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
1917 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
1918 *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
1919 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
1920 * ) ac_file_in=$ac_file.in ;;
1923 # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
1924 ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
1925 X"$ac_file" : 'X\(//\)[^/]' \| \
1926 X"$ac_file" : 'X\(//\)$' \| \
1927 X"$ac_file" : 'X\(/\)' \| \
1928 . : '\(.\)' 2>/dev/null ||
1930 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
1931 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
1932 /^X\(\/\/\)$/{ s//\1/; q; }
1933 /^X\(\/\).*/{ s//\1/; q; }
1936 [\\/]* | ?:[\\/]* ) as_incr_dir=;;
1940 for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
1941 case $as_mkdir_dir in
1942 # Skip DOS drivespec
1943 ?:) as_incr_dir=$as_mkdir_dir ;;
1945 as_incr_dir=$as_incr_dir/$as_mkdir_dir
1946 test -d "$as_incr_dir" ||
1947 mkdir "$as_incr_dir" ||
1948 { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
1949 echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
1950 { (exit 1); exit 1; }; }
1955 if test "$ac_dir" != .; then
1956 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
1957 # A "../" for each directory in $ac_dir_suffix.
1958 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
1960 ac_dir_suffix= ac_top_builddir=
1964 .) # No --srcdir option. We are building in place.
1966 if test -z "$ac_top_builddir"; then
1969 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
1971 [\\/]* | ?:[\\/]* ) # Absolute path.
1972 ac_srcdir=$srcdir$ac_dir_suffix;
1973 ac_top_srcdir=$srcdir ;;
1975 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
1976 ac_top_srcdir=$ac_top_builddir$srcdir ;;
1980 [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
1981 *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
1984 if test x"$ac_file" != x-; then
1985 { echo "$as_me:$LINENO: creating $ac_file" >&5
1986 echo "$as_me: creating $ac_file" >&6;}
1989 # Let's still pretend it is `configure' which instantiates (i.e., don't
1990 # use $as_me), people would be surprised to read:
1991 # /* config.h. Generated automatically by config.status. */
1992 configure_input="Generated automatically from `echo $ac_file_in |
1993 sed 's,.*/,,'` by configure."
1995 # First look for the input files in the build tree, otherwise in the
1997 ac_file_inputs=`IFS=:
1998 for f in $ac_file_in; do
2000 -) echo $tmp/stdin ;;
2002 # Absolute (can't be DOS-style, as IFS=:)
2003 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2004 echo "$as_me: error: cannot find input file: $f" >&2;}
2005 { (exit 1); exit 1; }; }
2008 if test -f "$f"; then
2011 elif test -f "$srcdir/$f"; then
2016 { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2017 echo "$as_me: error: cannot find input file: $f" >&2;}
2018 { (exit 1); exit 1; }; }
2021 done` || { (exit 1); exit 1; }
2023 cat >>$CONFIG_STATUS <<_ACEOF
2027 cat >>$CONFIG_STATUS <<\_ACEOF
2029 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
2030 s,@configure_input@,$configure_input,;t t
2031 s,@srcdir@,$ac_srcdir,;t t
2032 s,@top_srcdir@,$ac_top_srcdir,;t t
2033 s,@INSTALL@,$ac_INSTALL,;t t
2034 " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
2036 if test x"$ac_file" != x-; then
2037 mv $tmp/out $ac_file
2043 # Run the commands associated with the file.
2045 automake ) chmod +x automake ;;
2046 aclocal ) chmod +x aclocal ;;
2051 cat >>$CONFIG_STATUS <<\_ACEOF
2053 { (exit 0); exit 0; }
2055 chmod +x $CONFIG_STATUS
2056 ac_clean_files=$ac_clean_files_save
2058 # configure is writing to config.log, and then calls config.status.
2059 # config.status does its own redirection, appending to config.log.
2060 # Unfortunately, on DOS this fails, as config.log is still kept open
2061 # by configure, so config.status won't be able to write to it; its
2062 # output is simply discarded. So we exec the FD to /dev/null,
2063 # effectively closing config.log, so it can be properly (re)opened and
2064 # appended to by config.status. When coming back to configure, we
2065 # need to make the FD available again.
2066 if test "$no_create" != yes; then
2069 $SHELL $CONFIG_STATUS || ac_cs_success=false
2071 # Use ||, not &&, to avoid exiting from the if with $? = 1, which
2072 # would make configure fail if this is the last instruction.
2073 $ac_cs_success || { (exit 1); exit 1; }