riscv: qemu: support booting Linux
[platform/kernel/u-boot.git] / configs / woodburn_sd_defconfig
1 CONFIG_ARM=y
2 CONFIG_TARGET_WOODBURN_SD=y
3 CONFIG_SYS_TEXT_BASE=0x82000000
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_SPL_MMC_SUPPORT=y
8 CONFIG_SPL_SERIAL_SUPPORT=y
9 CONFIG_SPL=y
10 CONFIG_SPL_LIBDISK_SUPPORT=y
11 CONFIG_NR_DRAM_BANKS=1
12 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/woodburn/imximage.cfg"
13 CONFIG_BOOTDELAY=3
14 # CONFIG_DISPLAY_BOARDINFO is not set
15 CONFIG_SPL_BOARD_INIT=y
16 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
17 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
18 CONFIG_HUSH_PARSER=y
19 CONFIG_SYS_PROMPT="woodburn U-Boot > "
20 CONFIG_CMD_IMLS=y
21 CONFIG_CMD_GPIO=y
22 CONFIG_CMD_I2C=y
23 CONFIG_CMD_MMC=y
24 CONFIG_CMD_SPI=y
25 # CONFIG_CMD_SETEXPR is not set
26 CONFIG_CMD_DHCP=y
27 CONFIG_CMD_MII=y
28 CONFIG_CMD_PING=y
29 CONFIG_CMD_CACHE=y
30 CONFIG_CMD_DATE=y
31 CONFIG_CMD_EXT2=y
32 CONFIG_CMD_FAT=y
33 CONFIG_CMD_MTDPARTS=y
34 CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand,nor0=physmap-flash.0"
35 CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:50m(root1),32m(rootfb),64m(pcache),64m(app1),10m(app2),-(spool);physmap-flash.0:512k(u-boot),64k(env1),64k(env2),3776k(kernel1),3776k(kernel2)"
36 CONFIG_EFI_PARTITION=y
37 # CONFIG_PARTITION_UUIDS is not set
38 # CONFIG_SPL_PARTITION_UUIDS is not set
39 CONFIG_ENV_IS_IN_FLASH=y
40 CONFIG_MXC_GPIO=y
41 CONFIG_FSL_ESDHC=y
42 CONFIG_MTD_NOR_FLASH=y
43 CONFIG_FLASH_CFI_DRIVER=y
44 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
45 CONFIG_FLASH_CFI_MTD=y
46 CONFIG_SYS_FLASH_PROTECTION=y
47 CONFIG_SYS_FLASH_CFI=y
48 CONFIG_NAND=y
49 CONFIG_NAND_MXC=y
50 CONFIG_PHYLIB=y
51 CONFIG_PHY_MICREL=y
52 CONFIG_MII=y
53 CONFIG_SPI=y
54 CONFIG_MXC_SPI=y