Merge branch '2022-10-21-enforce-some-DM-migrations'
[platform/kernel/u-boot.git] / configs / vf610twr_nand_defconfig
1 CONFIG_ARM=y
2 CONFIG_SKIP_LOWLEVEL_INIT=y
3 CONFIG_SYS_THUMB_BUILD=y
4 CONFIG_ARCH_VF610=y
5 CONFIG_SYS_TEXT_BASE=0x3f401000
6 CONFIG_SYS_MALLOC_LEN=0x0220000
7 CONFIG_SYS_MALLOC_F_LEN=0x400
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_ENV_SIZE=0x20000
10 CONFIG_ENV_OFFSET=0x180000
11 CONFIG_SYS_I2C_MXC_I2C1=y
12 CONFIG_SYS_I2C_MXC_I2C2=y
13 CONFIG_DM_GPIO=y
14 CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
15 CONFIG_SYS_LOAD_ADDR=0x82000000
16 CONFIG_SYS_MEMTEST_START=0x80010000
17 CONFIG_SYS_MEMTEST_END=0x87c00000
18 CONFIG_HAS_BOARD_SIZE_LIMIT=y
19 CONFIG_BOARD_SIZE_LIMIT=520192
20 CONFIG_BOOTDELAY=3
21 CONFIG_USE_BOOTCOMMAND=y
22 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
23 CONFIG_LOGLEVEL=3
24 CONFIG_BOARD_EARLY_INIT_F=y
25 CONFIG_HUSH_PARSER=y
26 # CONFIG_CMDLINE_EDITING is not set
27 # CONFIG_AUTO_COMPLETE is not set
28 CONFIG_SYS_CBSIZE=256
29 CONFIG_SYS_PBSIZE=276
30 CONFIG_CMD_BOOTZ=y
31 CONFIG_CMD_MEMTEST=y
32 CONFIG_CMD_FUSE=y
33 CONFIG_CMD_GPIO=y
34 CONFIG_CMD_I2C=y
35 CONFIG_CMD_MMC=y
36 CONFIG_CMD_NAND_TRIMFFS=y
37 # CONFIG_CMD_SETEXPR is not set
38 CONFIG_CMD_DHCP=y
39 CONFIG_CMD_MII=y
40 CONFIG_CMD_PING=y
41 CONFIG_CMD_FAT=y
42 CONFIG_MTDIDS_DEFAULT="nand0=fsl_nfc"
43 CONFIG_MTDPARTS_DEFAULT="mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),4m(kernel),512k(fdt),-(rootfs)"
44 CONFIG_CMD_UBI=y
45 CONFIG_OF_CONTROL=y
46 CONFIG_ENV_OVERWRITE=y
47 CONFIG_ENV_IS_IN_NAND=y
48 CONFIG_ENV_RANGE=0x80000
49 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
50 CONFIG_VYBRID_GPIO=y
51 CONFIG_SYS_I2C_LEGACY=y
52 CONFIG_SYS_I2C_MXC=y
53 CONFIG_FSL_ESDHC_IMX=y
54 CONFIG_MTD=y
55 CONFIG_NAND_VF610_NFC=y
56 CONFIG_SYS_NAND_ONFI_DETECTION=y
57 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
58 CONFIG_PHYLIB=y
59 CONFIG_PHY_MICREL=y
60 CONFIG_PHY_MICREL_KSZ8XXX=y
61 CONFIG_FEC_MXC=y
62 CONFIG_MII=y
63 CONFIG_DM_SERIAL=y
64 CONFIG_FSL_LPUART=y