travis: Install pyelftools via pip
[platform/kernel/u-boot.git] / configs / vf610twr_nand_defconfig
1 CONFIG_ARM=y
2 CONFIG_SYS_THUMB_BUILD=y
3 CONFIG_ARCH_VF610=y
4 CONFIG_SYS_TEXT_BASE=0x3f401000
5 CONFIG_ENV_SIZE=0x20000
6 CONFIG_ENV_OFFSET=0x180000
7 CONFIG_DM_GPIO=y
8 CONFIG_NR_DRAM_BANKS=1
9 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
10 CONFIG_BOOTDELAY=3
11 CONFIG_LOGLEVEL=3
12 CONFIG_BOARD_EARLY_INIT_F=y
13 CONFIG_HUSH_PARSER=y
14 # CONFIG_CMDLINE_EDITING is not set
15 # CONFIG_AUTO_COMPLETE is not set
16 CONFIG_CMD_BOOTZ=y
17 CONFIG_CMD_MEMTEST=y
18 CONFIG_SYS_MEMTEST_START=0x80010000
19 CONFIG_SYS_MEMTEST_END=0x87c00000
20 CONFIG_CMD_FUSE=y
21 CONFIG_CMD_GPIO=y
22 CONFIG_CMD_I2C=y
23 CONFIG_CMD_MMC=y
24 CONFIG_CMD_NAND_TRIMFFS=y
25 # CONFIG_CMD_SETEXPR is not set
26 CONFIG_CMD_DHCP=y
27 CONFIG_CMD_MII=y
28 CONFIG_CMD_PING=y
29 CONFIG_CMD_FAT=y
30 CONFIG_MTDIDS_DEFAULT="nand0=fsl_nfc"
31 CONFIG_MTDPARTS_DEFAULT="mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),4m(kernel),512k(fdt),-(rootfs)"
32 CONFIG_CMD_UBI=y
33 CONFIG_OF_CONTROL=y
34 CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
35 CONFIG_ENV_IS_IN_NAND=y
36 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
37 CONFIG_DM=y
38 CONFIG_VYBRID_GPIO=y
39 CONFIG_FSL_ESDHC_IMX=y
40 CONFIG_MTD=y
41 CONFIG_NAND_VF610_NFC=y
42 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
43 CONFIG_PHYLIB=y
44 CONFIG_PHY_MICREL=y
45 CONFIG_PHY_MICREL_KSZ8XXX=y
46 CONFIG_MII=y
47 CONFIG_DM_SERIAL=y
48 CONFIG_FSL_LPUART=y
49 # CONFIG_EFI_LOADER is not set