configs/vf610twr_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SKIP_LOWLEVEL_INIT=y
   3 CONFIG_SYS_THUMB_BUILD=y
   4 CONFIG_ARCH_VF610=y
   5 CONFIG_SYS_TEXT_BASE=0x3f401000
   6 CONFIG_SYS_MALLOC_LEN=0x202000
   7 CONFIG_NR_DRAM_BANKS=1
   8 CONFIG_SYS_MEMTEST_START=0x80010000
   9 CONFIG_SYS_MEMTEST_END=0x87c00000
  10 CONFIG_ENV_SIZE=0x2000
  11 CONFIG_ENV_OFFSET=0xC0000
  12 CONFIG_SYS_I2C_MXC_I2C1=y
  13 CONFIG_SYS_I2C_MXC_I2C2=y
  14 CONFIG_DM_GPIO=y
  15 CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
  16 CONFIG_SYS_LOAD_ADDR=0x82000000
  17 CONFIG_BOOTDELAY=3
  18 CONFIG_USE_BOOTCOMMAND=y
  19 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
  20 CONFIG_LOGLEVEL=3
  21 CONFIG_BOARD_EARLY_INIT_F=y
  22 CONFIG_HUSH_PARSER=y
  23 # CONFIG_CMDLINE_EDITING is not set
  24 # CONFIG_AUTO_COMPLETE is not set
  25 CONFIG_CMD_BOOTZ=y
  26 CONFIG_CMD_MEMTEST=y
  27 CONFIG_CMD_FUSE=y
  28 CONFIG_CMD_GPIO=y
  29 CONFIG_CMD_I2C=y
  30 CONFIG_CMD_MMC=y
  31 CONFIG_CMD_NAND_TRIMFFS=y
  32 # CONFIG_CMD_SETEXPR is not set
  33 CONFIG_CMD_DHCP=y
  34 CONFIG_CMD_MII=y
  35 CONFIG_CMD_PING=y
  36 CONFIG_CMD_FAT=y
  37 CONFIG_MTDIDS_DEFAULT="nand0=fsl_nfc"
  38 CONFIG_MTDPARTS_DEFAULT="mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),4m(kernel),512k(fdt),-(rootfs)"
  39 CONFIG_CMD_UBI=y
  40 CONFIG_OF_CONTROL=y
  41 CONFIG_ENV_OVERWRITE=y
  42 CONFIG_ENV_IS_IN_MMC=y
  43 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  44 CONFIG_DM=y
  45 CONFIG_VYBRID_GPIO=y
  46 CONFIG_SYS_I2C_LEGACY=y
  47 CONFIG_SYS_I2C_MXC=y
  48 CONFIG_FSL_ESDHC_IMX=y
  49 CONFIG_MTD=y
  50 CONFIG_NAND_VF610_NFC=y
  51 CONFIG_SYS_NAND_ONFI_DETECTION=y
  52 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
  53 CONFIG_PHYLIB=y
  54 CONFIG_PHY_MICREL=y
  55 CONFIG_PHY_MICREL_KSZ8XXX=y
  56 CONFIG_FEC_MXC=y
  57 CONFIG_MII=y
  58 CONFIG_DM_SERIAL=y
  59 CONFIG_FSL_LPUART=y