ARM: imx: Enable LTO for DH electronics i.MX8M Plus DHCOM
[platform/kernel/u-boot.git] / configs / u200_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MESON=y
3 CONFIG_TEXT_BASE=0x01000000
4 CONFIG_NR_DRAM_BANKS=1
5 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
6 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
7 CONFIG_ENV_SIZE=0x2000
8 CONFIG_DM_GPIO=y
9 CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-u200"
10 CONFIG_DM_RESET=y
11 CONFIG_MESON_G12A=y
12 CONFIG_DEBUG_UART_BASE=0xff803000
13 CONFIG_DEBUG_UART_CLOCK=24000000
14 CONFIG_IDENT_STRING=" u200"
15 CONFIG_SYS_LOAD_ADDR=0x1000000
16 CONFIG_DEBUG_UART=y
17 CONFIG_REMAKE_ELF=y
18 CONFIG_OF_BOARD_SETUP=y
19 # CONFIG_DISPLAY_CPUINFO is not set
20 CONFIG_MISC_INIT_R=y
21 CONFIG_SYS_MAXARGS=32
22 # CONFIG_CMD_BDI is not set
23 # CONFIG_CMD_IMI is not set
24 CONFIG_CMD_GPIO=y
25 # CONFIG_CMD_LOADS is not set
26 CONFIG_CMD_MMC=y
27 CONFIG_CMD_USB=y
28 CONFIG_CMD_USB_MASS_STORAGE=y
29 # CONFIG_CMD_SETEXPR is not set
30 CONFIG_CMD_REGULATOR=y
31 CONFIG_OF_CONTROL=y
32 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
33 CONFIG_MMC_MESON_GX=y
34 CONFIG_DM_MDIO=y
35 CONFIG_DM_MDIO_MUX=y
36 CONFIG_ETH_DESIGNWARE_MESON8B=y
37 CONFIG_MDIO_MUX_MESON_G12A=y
38 CONFIG_MESON_G12A_USB_PHY=y
39 CONFIG_PINCTRL=y
40 CONFIG_PINCTRL_MESON_G12A=y
41 CONFIG_DM_REGULATOR=y
42 CONFIG_DM_REGULATOR_FIXED=y
43 CONFIG_DEBUG_UART_ANNOUNCE=y
44 CONFIG_DEBUG_UART_SKIP_INIT=y
45 CONFIG_MESON_SERIAL=y
46 CONFIG_USB=y
47 CONFIG_DM_USB_GADGET=y
48 CONFIG_USB_XHCI_HCD=y
49 CONFIG_USB_XHCI_DWC3=y
50 CONFIG_USB_DWC3=y
51 # CONFIG_USB_DWC3_GADGET is not set
52 CONFIG_USB_DWC3_MESON_G12A=y
53 CONFIG_USB_GADGET=y
54 CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
55 CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
56 CONFIG_USB_GADGET_DWC2_OTG=y
57 CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y
58 CONFIG_USB_GADGET_DOWNLOAD=y
59 CONFIG_OF_LIBFDT_OVERLAY=y