pico-imx7d: Add SPL support
[platform/kernel/u-boot.git] / configs / ti816x_evm_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_OMAP2PLUS=y
3 CONFIG_SPL_GPIO_SUPPORT=y
4 CONFIG_SPL_LIBCOMMON_SUPPORT=y
5 CONFIG_SPL_LIBGENERIC_SUPPORT=y
6 CONFIG_TI816X=y
7 CONFIG_TARGET_TI816X_EVM=y
8 CONFIG_SPL_MMC_SUPPORT=y
9 CONFIG_SPL_SERIAL_SUPPORT=y
10 CONFIG_SPL=y
11 CONFIG_SPL_FAT_SUPPORT=y
12 CONFIG_SPL_LIBDISK_SUPPORT=y
13 CONFIG_DEFAULT_DEVICE_TREE="dm8168-evm"
14 CONFIG_DISTRO_DEFAULTS=y
15 CONFIG_BOOTDELAY=3
16 CONFIG_USE_BOOTARGS=y
17 CONFIG_BOOTARGS="console=ttyO2,115200n8 noinitrd earlyprintk"
18 # CONFIG_USE_BOOTCOMMAND is not set
19 CONFIG_SYS_CONSOLE_INFO_QUIET=y
20 CONFIG_VERSION_VARIABLE=y
21 # CONFIG_DISPLAY_BOARDINFO is not set
22 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
23 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
24 CONFIG_SPL_NAND_SUPPORT=y
25 # CONFIG_CMD_FLASH is not set
26 CONFIG_CMD_GPIO=y
27 CONFIG_CMD_I2C=y
28 CONFIG_CMD_MMC=y
29 CONFIG_CMD_NAND=y
30 # CONFIG_CMD_SETEXPR is not set
31 CONFIG_CMD_EXT4_WRITE=y
32 CONFIG_CMD_MTDPARTS=y
33 CONFIG_MTDIDS_DEFAULT="nand0=nand.0"
34 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)"
35 # CONFIG_ISO_PARTITION is not set
36 # CONFIG_EFI_PARTITION is not set
37 CONFIG_OF_CONTROL=y
38 CONFIG_ENV_IS_IN_NAND=y
39 CONFIG_DM=y
40 CONFIG_DM_GPIO=y
41 CONFIG_DM_I2C=y
42 CONFIG_SYS_I2C_OMAP24XX=y
43 CONFIG_MMC_OMAP_HS=y
44 CONFIG_NAND=y
45 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
46 CONFIG_SYS_NS16550=y
47 CONFIG_SPI=y
48 CONFIG_OMAP3_SPI=y
49 # CONFIG_USE_PRIVATE_LIBGCC is not set