binman: Update fit to move node reading into the ReadNode() method
[platform/kernel/u-boot.git] / configs / thuban_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_OMAP2PLUS=y
3 CONFIG_SYS_TEXT_BASE=0x80100000
4 CONFIG_SYS_MALLOC_LEN=0x1000000
5 CONFIG_SYS_MALLOC_F_LEN=0x2000
6 CONFIG_SPL_GPIO=y
7 CONFIG_SPL_LIBCOMMON_SUPPORT=y
8 CONFIG_SPL_LIBGENERIC_SUPPORT=y
9 CONFIG_NR_DRAM_BANKS=1
10 CONFIG_ENV_SIZE=0x2000
11 CONFIG_SPL_DM_SPI=y
12 CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
13 CONFIG_AM33XX=y
14 CONFIG_SYS_MPUCLK=300
15 CONFIG_TARGET_THUBAN=y
16 CONFIG_SPL_MMC=y
17 CONFIG_SPL_SERIAL=y
18 CONFIG_BOOTCOUNT_BOOTLIMIT=3
19 CONFIG_SPL=y
20 CONFIG_ENV_OFFSET_REDUND=0x2E0000
21 CONFIG_SPL_FS_FAT=y
22 CONFIG_SPL_LIBDISK_SUPPORT=y
23 CONFIG_SPL_SPI_FLASH_SUPPORT=y
24 CONFIG_SPL_SPI=y
25 CONFIG_ENV_VARS_UBOOT_CONFIG=y
26 CONFIG_SYS_LOAD_ADDR=0x81000000
27 CONFIG_BOOTDELAY=3
28 CONFIG_AUTOBOOT_KEYED=y
29 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
30 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
31 CONFIG_USE_PREBOOT=y
32 CONFIG_SYS_CONSOLE_INFO_QUIET=y
33 # CONFIG_DISPLAY_BOARDINFO is not set
34 CONFIG_ARCH_MISC_INIT=y
35 CONFIG_SPL_I2C=y
36 CONFIG_SPL_NAND_DRIVERS=y
37 CONFIG_SPL_NAND_ECC=y
38 CONFIG_SPL_NAND_BASE=y
39 CONFIG_SPL_DM_SPI_FLASH=y
40 CONFIG_SPL_SPI_LOAD=y
41 CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
42 CONFIG_SPL_WATCHDOG=y
43 CONFIG_SPL_YMODEM_SUPPORT=y
44 # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
45 CONFIG_HUSH_PARSER=y
46 CONFIG_SYS_PROMPT="U-Boot# "
47 CONFIG_CMD_ASKENV=y
48 CONFIG_CMD_DFU=y
49 # CONFIG_CMD_FLASH is not set
50 CONFIG_CMD_GPIO=y
51 CONFIG_CMD_I2C=y
52 CONFIG_CMD_MMC=y
53 CONFIG_CMD_NAND=y
54 CONFIG_CMD_USB=y
55 # CONFIG_CMD_SETEXPR is not set
56 CONFIG_CMD_DHCP=y
57 CONFIG_BOOTP_DNS2=y
58 CONFIG_CMD_MII=y
59 CONFIG_CMD_PING=y
60 CONFIG_CMD_CACHE=y
61 CONFIG_CMD_TIME=y
62 CONFIG_CMD_EXT2=y
63 CONFIG_CMD_MTDPARTS=y
64 CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
65 CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(spl),128k(spl.backup1),128k(spl.backup2),128k(spl.backup3),1920k(u-boot),512k(u-boot.env0),512k(u-boot.env1),512k(mtdoops),-(rootfs)"
66 CONFIG_CMD_UBI=y
67 CONFIG_OF_CONTROL=y
68 CONFIG_SPL_OF_CONTROL=y
69 CONFIG_OF_EMBED=y
70 CONFIG_ENV_OVERWRITE=y
71 CONFIG_ENV_IS_IN_NAND=y
72 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
73 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
74 CONFIG_BOOTP_SEND_HOSTNAME=y
75 CONFIG_SPL_DM=y
76 # CONFIG_SPL_BLK is not set
77 CONFIG_BOOTCOUNT_LIMIT=y
78 CONFIG_BOOTCOUNT_ENV=y
79 CONFIG_DFU_NAND=y
80 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
81 CONFIG_SYS_I2C_LEGACY=y
82 CONFIG_SPL_SYS_I2C_LEGACY=y
83 # CONFIG_SPL_DM_MMC is not set
84 CONFIG_MMC_OMAP_HS=y
85 CONFIG_MTD=y
86 CONFIG_MTD_RAW_NAND=y
87 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
88 CONFIG_SYS_NAND_ONFI_DETECTION=y
89 CONFIG_SYS_NAND_PAGE_COUNT=0x40
90 CONFIG_SYS_NAND_PAGE_SIZE=0x800
91 CONFIG_SYS_NAND_OOBSIZE=0x40
92 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
93 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
94 CONFIG_DM_SPI_FLASH=y
95 CONFIG_SPI_FLASH_WINBOND=y
96 CONFIG_MTD_UBI_FASTMAP=y
97 CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
98 CONFIG_PHY_SMSC=y
99 CONFIG_DRIVER_TI_CPSW=y
100 CONFIG_SPI=y
101 CONFIG_DM_SPI=y
102 CONFIG_OMAP3_SPI=y
103 CONFIG_USB=y
104 # CONFIG_SPL_DM_USB is not set
105 CONFIG_USB_MUSB_HOST=y
106 CONFIG_USB_MUSB_GADGET=y
107 CONFIG_USB_MUSB_DSPS=y
108 CONFIG_USB_GADGET=y
109 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
110 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
111 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
112 CONFIG_USB_GADGET_DOWNLOAD=y
113 CONFIG_USB_ETHER=y