configs: Update Meson GX configs
[platform/kernel/u-boot.git] / configs / taurus_defconfig
1 CONFIG_ARM=y
2 CONFIG_SPL_SYS_THUMB_BUILD=y
3 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
4 # CONFIG_SPL_USE_ARCH_MEMSET is not set
5 CONFIG_ARCH_AT91=y
6 CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
7 CONFIG_SYS_TEXT_BASE=0x21000000
8 CONFIG_TARGET_TAURUS=y
9 CONFIG_SPL_GPIO_SUPPORT=y
10 CONFIG_SPL_LIBCOMMON_SUPPORT=y
11 CONFIG_SPL_LIBGENERIC_SUPPORT=y
12 CONFIG_SYS_MALLOC_F_LEN=0x1000
13 CONFIG_SPL_SERIAL_SUPPORT=y
14 CONFIG_SPL=y
15 CONFIG_SPL_SPI_FLASH_SUPPORT=y
16 CONFIG_SPL_SPI_SUPPORT=y
17 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus"
18 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS"
19 CONFIG_BOOTDELAY=3
20 CONFIG_USE_BOOTARGS=y
21 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
22 # CONFIG_DISPLAY_BOARDINFO is not set
23 CONFIG_BOARD_EARLY_INIT_F=y
24 CONFIG_SPL_NAND_SUPPORT=y
25 CONFIG_SPL_SPI_LOAD=y
26 CONFIG_HUSH_PARSER=y
27 CONFIG_SYS_PROMPT="U-Boot> "
28 # CONFIG_CMD_BDI is not set
29 CONFIG_CMD_BOOTZ=y
30 # CONFIG_CMD_IMI is not set
31 CONFIG_CMD_DFU=y
32 # CONFIG_CMD_LOADS is not set
33 CONFIG_CMD_NAND=y
34 CONFIG_CMD_SF=y
35 CONFIG_CMD_SPI=y
36 CONFIG_CMD_USB=y
37 # CONFIG_CMD_SOURCE is not set
38 # CONFIG_CMD_SETEXPR is not set
39 CONFIG_CMD_DHCP=y
40 CONFIG_CMD_PING=y
41 CONFIG_CMD_MTDPARTS=y
42 # CONFIG_DOS_PARTITION is not set
43 CONFIG_OF_CONTROL=y
44 CONFIG_OF_EMBED=y
45 CONFIG_ENV_IS_IN_NAND=y
46 CONFIG_CLK=y
47 CONFIG_CLK_AT91=y
48 CONFIG_DFU_NAND=y
49 # CONFIG_MMC is not set
50 CONFIG_SPI_FLASH=y
51 CONFIG_SPI_FLASH_STMICRO=y
52 CONFIG_PHYLIB=y
53 CONFIG_USB=y
54 CONFIG_USB_STORAGE=y
55 CONFIG_USB_GADGET=y
56 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
57 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
58 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
59 CONFIG_USB_GADGET_DOWNLOAD=y
60 CONFIG_USE_TINY_PRINTF=y