configs/socfpga_secu1_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SYS_L2_PL310=y
   3 CONFIG_ARCH_SOCFPGA=y
   4 CONFIG_SYS_MALLOC_LEN=0x4000000
   5 CONFIG_SYS_MALLOC_F_LEN=0x800
   6 CONFIG_ENV_SIZE=0x1000
   7 CONFIG_ENV_OFFSET=0x100000
   8 CONFIG_DM_GPIO=y
   9 CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_secu1"
  10 CONFIG_SPL_TEXT_BASE=0xFFFF0000
  11 # CONFIG_SPL_MMC is not set
  12 CONFIG_SPL_DRIVERS_MISC=y
  13 CONFIG_TARGET_SOCFPGA_ARRIA5_SECU1=y
  14 CONFIG_ENV_OFFSET_REDUND=0x120000
  15 # CONFIG_SPL_LIBDISK_SUPPORT is not set
  16 # CONFIG_SPL_SPI is not set
  17 CONFIG_SYS_LOAD_ADDR=0x02000000
  18 CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
  19 CONFIG_DISTRO_DEFAULTS=y
  20 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
  21 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000
  22 CONFIG_FIT=y
  23 CONFIG_BOOT_RETRY=y
  24 CONFIG_BOOT_RETRY_TIME=45
  25 CONFIG_RESET_TO_RETRY=y
  26 CONFIG_USE_BOOTARGS=y
  27 CONFIG_BOOTARGS="console=ttyS0,115200 ubi.fm_autoconvert=1 uio_pdrv_genirq.of_id=\"idq,regbank\""
  28 CONFIG_BOOTCOMMAND="setenv bootcmd 'bridge enable; if test ${bootnum} = 'b'; then run _fpga_loadsafe; else if test ${bootcount} -eq 4; then echo 'Switching copy...'; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; run _fpga_loaduser; fi;echo 'Booting bank $bootnum' && run userload && run userboot;' && setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && saveenv && saveenv && boot;"
  29 CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_secu1.dtb"
  30 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  31 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
  32 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
  33 # CONFIG_DISPLAY_BOARDINFO is not set
  34 CONFIG_DISPLAY_BOARDINFO_LATE=y
  35 CONFIG_CLOCKS=y
  36 CONFIG_MISC_INIT_R=y
  37 CONFIG_SPL_PAD_TO=0x10000
  38 CONFIG_SPL_NO_BSS_LIMIT=y
  39 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
  40 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
  41 CONFIG_SPL_STACK=0x0
  42 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
  43 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1
  44 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set
  45 CONFIG_SPL_MTD_SUPPORT=y
  46 CONFIG_SPL_NAND_SUPPORT=y
  47 CONFIG_SYS_MAXARGS=32
  48 CONFIG_SYS_BOOTM_LEN=0x4000000
  49 CONFIG_CMD_ASKENV=y
  50 CONFIG_CMD_GREPENV=y
  51 CONFIG_CMD_EEPROM=y
  52 CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
  53 CONFIG_SYS_EEPROM_SIZE=1024
  54 # CONFIG_CMD_FLASH is not set
  55 CONFIG_CMD_GPIO=y
  56 CONFIG_CMD_I2C=y
  57 CONFIG_CMD_MMC=y
  58 CONFIG_CMD_NAND_TRIMFFS=y
  59 CONFIG_CMD_SPI=y
  60 CONFIG_CMD_WDT=y
  61 CONFIG_CMD_CACHE=y
  62 CONFIG_MTDIDS_DEFAULT="nand0=denali-nand"
  63 CONFIG_MTDPARTS_DEFAULT="mtdparts=denali-nand:512k(nand.4spl),512k(nand.uboot),128k(nand.env1),128k(nand.env2),0x1000000(nand.rec),0x3ee40000(nand.ubi),0x80000@0x3ff80000(nand.bbt)"
  64 CONFIG_CMD_UBI=y
  65 # CONFIG_CMD_UBIFS is not set
  66 # CONFIG_ISO_PARTITION is not set
  67 # CONFIG_EFI_PARTITION is not set
  68 CONFIG_ENV_OVERWRITE=y
  69 CONFIG_ENV_IS_IN_NAND=y
  70 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  71 CONFIG_USE_BOOTFILE=y
  72 CONFIG_BOOTFILE="zImage"
  73 CONFIG_VERSION_VARIABLE=y
  74 CONFIG_SPL_DM_SEQ_ALIAS=y
  75 # CONFIG_SPL_BLK is not set
  76 CONFIG_BOOTCOUNT_LIMIT=y
  77 CONFIG_DM_BOOTCOUNT=y
  78 CONFIG_DM_BOOTCOUNT_RTC=y
  79 CONFIG_DWAPB_GPIO=y
  80 CONFIG_DM_I2C=y
  81 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
  82 CONFIG_DM_I2C_GPIO=y
  83 CONFIG_MISC=y
  84 CONFIG_I2C_EEPROM=y
  85 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
  86 CONFIG_MMC_DW=y
  87 CONFIG_MTD=y
  88 CONFIG_DM_MTD=y
  89 CONFIG_MTD_RAW_NAND=y
  90 CONFIG_SYS_NAND_USE_FLASH_BBT=y
  91 CONFIG_NAND_DENALI_DT=y
  92 CONFIG_SYS_NAND_ONFI_DETECTION=y
  93 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
  94 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
  95 CONFIG_SPL_NAND_DENALI=y
  96 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=2
  97 # CONFIG_DM_SPI_FLASH is not set
  98 CONFIG_MTD_UBI_FASTMAP=y
  99 CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
 100 CONFIG_MV88E6352_SWITCH=y
 101 CONFIG_PHY_FIXED=y
 102 CONFIG_PHY_GIGE=y
 103 CONFIG_ETH_DESIGNWARE=y
 104 CONFIG_MII=y
 105 CONFIG_DM_RESET=y
 106 CONFIG_DM_RTC=y
 107 CONFIG_RTC_M41T62=y
 108 CONFIG_SPI=y
 109 CONFIG_SPI_MEM=y
 110 CONFIG_DESIGNWARE_SPI=y
 111 CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
 112 CONFIG_DESIGNWARE_WATCHDOG=y
 113 CONFIG_WDT=y
 114 # CONFIG_GZIP is not set