ARM: imx: Enable LTO for DH electronics i.MX8M Plus DHCOM
[platform/kernel/u-boot.git] / configs / smegw01_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX7=y
3 CONFIG_SYS_MALLOC_LEN=0x2300000
4 CONFIG_NR_DRAM_BANKS=1
5 CONFIG_ENV_SIZE=0x2000
6 CONFIG_ENV_OFFSET=0x100000
7 CONFIG_DM_GPIO=y
8 CONFIG_DEFAULT_DEVICE_TREE="imx7d-smegw01"
9 CONFIG_TARGET_SMEGW01=y
10 CONFIG_ENV_OFFSET_REDUND=0x110000
11 CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
12 # CONFIG_ARMV7_VIRT is not set
13 CONFIG_IMX_RDC=y
14 CONFIG_IMX_BOOTAUX=y
15 CONFIG_IMX_HAB=y
16 CONFIG_SYS_MEMTEST_START=0x80000000
17 CONFIG_SYS_MEMTEST_END=0xa0000000
18 CONFIG_FIT=y
19 CONFIG_FIT_VERBOSE=y
20 CONFIG_USE_BOOTCOMMAND=y
21 CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi; "
22 CONFIG_HUSH_PARSER=y
23 CONFIG_SYS_MAXARGS=32
24 CONFIG_SYS_PBSIZE=532
25 # CONFIG_CMD_BOOTD is not set
26 CONFIG_CMD_BOOTZ=y
27 # CONFIG_CMD_IMI is not set
28 # CONFIG_CMD_XIMG is not set
29 CONFIG_CMD_MEMTEST=y
30 CONFIG_CMD_UNZIP=y
31 CONFIG_CMD_DFU=y
32 CONFIG_CMD_GPIO=y
33 CONFIG_CMD_MMC=y
34 CONFIG_CMD_PART=y
35 CONFIG_CMD_DHCP=y
36 CONFIG_CMD_CACHE=y
37 CONFIG_CMD_EXT2=y
38 CONFIG_CMD_EXT4=y
39 CONFIG_CMD_EXT4_WRITE=y
40 CONFIG_CMD_FAT=y
41 CONFIG_CMD_FS_GENERIC=y
42 CONFIG_OF_CONTROL=y
43 CONFIG_ENV_OVERWRITE=y
44 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
45 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
46 CONFIG_NET_RANDOM_ETHADDR=y
47 CONFIG_BOUNCE_BUFFER=y
48 CONFIG_DFU_MMC=y
49 CONFIG_DM_I2C=y
50 CONFIG_SUPPORT_EMMC_BOOT=y
51 CONFIG_FSL_USDHC=y
52 CONFIG_MTD=y
53 CONFIG_PHYLIB=y
54 CONFIG_PHY_MICREL=y
55 CONFIG_PHY_MICREL_KSZ90X1=y
56 CONFIG_FEC_MXC=y
57 CONFIG_RGMII=y
58 CONFIG_MII=y
59 CONFIG_PINCTRL=y
60 CONFIG_PINCTRL_IMX7=y
61 CONFIG_DM_PMIC=y
62 CONFIG_DM_PMIC_PFUZE100=y
63 CONFIG_DM_REGULATOR=y
64 CONFIG_DM_REGULATOR_PFUZE100=y
65 CONFIG_DM_REGULATOR_FIXED=y
66 CONFIG_DM_REGULATOR_GPIO=y
67 CONFIG_SPECIFY_CONSOLE_INDEX=y
68 CONFIG_DM_SERIAL=y
69 CONFIG_MXC_UART=y
70 CONFIG_IMX_THERMAL=y