xilinx: Sync symbols location in defconfigs
[platform/kernel/u-boot.git] / configs / smartweb_defconfig
1 CONFIG_ARM=y
2 CONFIG_SPL_SYS_THUMB_BUILD=y
3 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
4 # CONFIG_SPL_USE_ARCH_MEMSET is not set
5 CONFIG_ARCH_AT91=y
6 CONFIG_SYS_TEXT_BASE=0x23000000
7 CONFIG_TARGET_SMARTWEB=y
8 CONFIG_SPL_GPIO_SUPPORT=y
9 CONFIG_SPL_LIBCOMMON_SUPPORT=y
10 CONFIG_SPL_LIBGENERIC_SUPPORT=y
11 CONFIG_SYS_MALLOC_F_LEN=0x2000
12 CONFIG_SPL_NAND_SUPPORT=y
13 CONFIG_SPL=y
14 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
15 CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
16 CONFIG_FIT=y
17 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
18 CONFIG_BOOTDELAY=3
19 # CONFIG_DISPLAY_BOARDINFO is not set
20 CONFIG_BOARD_EARLY_INIT_F=y
21 CONFIG_HUSH_PARSER=y
22 CONFIG_SYS_PROMPT="U-Boot# "
23 CONFIG_AUTOBOOT_KEYED=y
24 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
25 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
26 # CONFIG_CMD_IMI is not set
27 CONFIG_CMD_DFU=y
28 # CONFIG_CMD_LOADS is not set
29 CONFIG_CMD_NAND=y
30 CONFIG_CMD_USB=y
31 # CONFIG_CMD_SOURCE is not set
32 CONFIG_CMD_DHCP=y
33 CONFIG_CMD_PING=y
34 CONFIG_CMD_FAT=y
35 CONFIG_CMD_MTDPARTS=y
36 CONFIG_MTDIDS_DEFAULT="nand0=atmel_nand"
37 CONFIG_MTDPARTS_DEFAULT="mtdparts=atmel_nand:128k(Bootstrap),896k(U-Boot),512k(ENV0),512k(ENV1),4M(Linux),-(Root-FS)"
38 # CONFIG_DOS_PARTITION is not set
39 CONFIG_OF_CONTROL=y
40 CONFIG_OF_EMBED=y
41 CONFIG_ENV_IS_IN_NAND=y
42 CONFIG_CLK=y
43 CONFIG_CLK_AT91=y
44 CONFIG_DFU_NAND=y
45 # CONFIG_MMC is not set
46 CONFIG_PHYLIB=y
47 CONFIG_USB=y
48 CONFIG_DM_USB=y
49 CONFIG_USB_GADGET=y
50 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
51 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
52 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
53 CONFIG_USB_GADGET_DOWNLOAD=y
54 CONFIG_USB_HOST_ETHER=y
55 CONFIG_USB_ETHER_ASIX=y
56 CONFIG_USB_ETHER_MCS7830=y
57 # CONFIG_EFI_LOADER is not set