pch: Rename PCH_SUPPORT to PCH
[platform/kernel/u-boot.git] / configs / seaboard_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_TEGRA=y
3 CONFIG_SYS_TEXT_BASE=0x00110000
4 CONFIG_NR_DRAM_BANKS=2
5 CONFIG_ENV_SIZE=0x2000
6 CONFIG_ENV_OFFSET=0xFFFFE000
7 CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard"
8 CONFIG_SPL_TEXT_BASE=0x00108000
9 CONFIG_TEGRA20=y
10 CONFIG_TARGET_SEABOARD=y
11 CONFIG_SYS_LOAD_ADDR=0x1000000
12 CONFIG_OF_SYSTEM_SETUP=y
13 CONFIG_USE_PREBOOT=y
14 CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # "
15 # CONFIG_CMD_IMI is not set
16 # CONFIG_CMD_FLASH is not set
17 CONFIG_CMD_GPIO=y
18 CONFIG_CMD_I2C=y
19 CONFIG_CMD_MMC=y
20 CONFIG_CMD_NAND=y
21 CONFIG_CMD_USB=y
22 # CONFIG_CMD_SETEXPR is not set
23 # CONFIG_CMD_NFS is not set
24 CONFIG_CMD_PMIC=y
25 CONFIG_CMD_REGULATOR=y
26 CONFIG_CMD_EXT4_WRITE=y
27 # CONFIG_SPL_DOS_PARTITION is not set
28 # CONFIG_SPL_EFI_PARTITION is not set
29 CONFIG_ENV_OVERWRITE=y
30 CONFIG_ENV_IS_IN_MMC=y
31 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
32 CONFIG_SYS_MMC_ENV_PART=2
33 CONFIG_SPL_DM=y
34 CONFIG_SYS_I2C_TEGRA=y
35 CONFIG_TEGRA_KEYBOARD=y
36 CONFIG_MTD=y
37 CONFIG_MTD_RAW_NAND=y
38 CONFIG_DM_PMIC=y
39 CONFIG_DM_REGULATOR=y
40 CONFIG_DM_REGULATOR_FIXED=y
41 CONFIG_PWM_TEGRA=y
42 CONFIG_SYS_NS16550=y
43 CONFIG_USB=y
44 CONFIG_USB_EHCI_HCD=y
45 CONFIG_USB_EHCI_TEGRA=y
46 CONFIG_USB_ULPI_VIEWPORT=y
47 CONFIG_USB_ULPI=y
48 CONFIG_USB_KEYBOARD=y
49 CONFIG_USB_HOST_ETHER=y
50 CONFIG_USB_ETHER_ASIX=y
51 CONFIG_DM_VIDEO=y
52 # CONFIG_VIDEO_BPP8 is not set
53 CONFIG_VIDEO_TEGRA20=y
54 CONFIG_CONSOLE_SCROLL_LINES=10
55 CONFIG_AES=y