xilinx: Enable MTD and UBIFS for zynq and zynqmp
[platform/kernel/u-boot.git] / configs / sama5d4ek_nandflash_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_CPU_INIT=y
3 CONFIG_ARCH_AT91=y
4 CONFIG_SYS_TEXT_BASE=0x26f00000
5 CONFIG_TARGET_SAMA5D4EK=y
6 CONFIG_SPL_GPIO_SUPPORT=y
7 CONFIG_SPL_LIBCOMMON_SUPPORT=y
8 CONFIG_SPL_LIBGENERIC_SUPPORT=y
9 CONFIG_SYS_MALLOC_F_LEN=0x2000
10 CONFIG_DM_GPIO=y
11 CONFIG_SPL_SERIAL_SUPPORT=y
12 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
13 CONFIG_NR_DRAM_BANKS=1
14 CONFIG_SPL=y
15 CONFIG_DEBUG_UART_BOARD_INIT=y
16 CONFIG_DEBUG_UART_BASE=0xfc00c000
17 CONFIG_DEBUG_UART_CLOCK=88000000
18 CONFIG_ENV_OFFSET_REDUND=0x100000
19 CONFIG_DEBUG_UART=y
20 CONFIG_SPL_TEXT_BASE=0x200000
21 CONFIG_ENV_VARS_UBOOT_CONFIG=y
22 CONFIG_FIT=y
23 CONFIG_NAND_BOOT=y
24 CONFIG_BOOTDELAY=3
25 CONFIG_USE_BOOTARGS=y
26 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
27 # CONFIG_CONSOLE_MUX is not set
28 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
29 # CONFIG_DISPLAY_BOARDINFO is not set
30 CONFIG_SPL_NAND_SUPPORT=y
31 CONFIG_HUSH_PARSER=y
32 CONFIG_CMD_BOOTZ=y
33 # CONFIG_CMD_IMI is not set
34 # CONFIG_CMD_FLASH is not set
35 # CONFIG_CMD_LOADS is not set
36 CONFIG_CMD_MMC=y
37 CONFIG_CMD_NAND=y
38 CONFIG_CMD_USB=y
39 CONFIG_CMD_DHCP=y
40 CONFIG_CMD_PING=y
41 CONFIG_CMD_FAT=y
42 CONFIG_OF_CONTROL=y
43 CONFIG_SPL_OF_CONTROL=y
44 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
45 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dma-names dmas"
46 CONFIG_ENV_IS_IN_NAND=y
47 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
48 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
49 CONFIG_DM=y
50 CONFIG_SPL_DM=y
51 CONFIG_SPL_DM_SEQ_ALIAS=y
52 CONFIG_CLK=y
53 CONFIG_SPL_CLK=y
54 CONFIG_CLK_AT91=y
55 CONFIG_AT91_UTMI=y
56 CONFIG_AT91_H32MX=y
57 CONFIG_AT91_GPIO=y
58 CONFIG_DM_MMC=y
59 CONFIG_GENERIC_ATMEL_MCI=y
60 CONFIG_MTD=y
61 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
62 CONFIG_NAND_ATMEL=y
63 CONFIG_PMECC_CAP=8
64 CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y
65 CONFIG_DM_SPI_FLASH=y
66 CONFIG_SF_DEFAULT_SPEED=30000000
67 CONFIG_SPI_FLASH_ATMEL=y
68 CONFIG_DM_ETH=y
69 CONFIG_MACB=y
70 CONFIG_PINCTRL=y
71 CONFIG_SPL_PINCTRL=y
72 CONFIG_PINCTRL_AT91=y
73 CONFIG_DM_SERIAL=y
74 CONFIG_DEBUG_UART_ATMEL=y
75 CONFIG_DEBUG_UART_ANNOUNCE=y
76 CONFIG_ATMEL_USART=y
77 CONFIG_SPI=y
78 CONFIG_DM_SPI=y
79 CONFIG_TIMER=y
80 CONFIG_SPL_TIMER=y
81 CONFIG_ATMEL_PIT_TIMER=y
82 CONFIG_USB=y
83 CONFIG_DM_USB=y
84 CONFIG_USB_EHCI_HCD=y
85 CONFIG_USB_STORAGE=y
86 CONFIG_USB_GADGET=y
87 CONFIG_USB_GADGET_ATMEL_USBA=y
88 CONFIG_DM_VIDEO=y
89 # CONFIG_VIDEO_BPP8 is not set
90 # CONFIG_VIDEO_BPP32 is not set
91 CONFIG_ATMEL_HLCD=y