configs/sama5d3_xplained_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_SYS_TEXT_BASE=0x26f00000
   4 CONFIG_TARGET_SAMA5D3_XPLAINED=y
   5 CONFIG_SPL_GPIO_SUPPORT=y
   6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8 CONFIG_SYS_MALLOC_F_LEN=0x2000
   9 CONFIG_SPL_SERIAL_SUPPORT=y
  10 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
  11 CONFIG_SPL=y
  12 CONFIG_DEBUG_UART_BOARD_INIT=y
  13 CONFIG_DEBUG_UART_BASE=0xffffee00
  14 CONFIG_DEBUG_UART_CLOCK=132000000
  15 CONFIG_DEBUG_UART=y
  16 CONFIG_ENV_VARS_UBOOT_CONFIG=y
  17 CONFIG_NR_DRAM_BANKS=1
  18 CONFIG_FIT=y
  19 CONFIG_NAND_BOOT=y
  20 CONFIG_BOOTDELAY=3
  21 CONFIG_USE_BOOTARGS=y
  22 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs"
  23 # CONFIG_DISPLAY_BOARDINFO is not set
  24 CONFIG_SPL_NAND_SUPPORT=y
  25 CONFIG_HUSH_PARSER=y
  26 CONFIG_CMD_BOOTZ=y
  27 # CONFIG_CMD_IMI is not set
  28 # CONFIG_CMD_FLASH is not set
  29 # CONFIG_CMD_LOADS is not set
  30 CONFIG_CMD_MMC=y
  31 CONFIG_CMD_NAND=y
  32 CONFIG_CMD_NAND_TRIMFFS=y
  33 CONFIG_CMD_USB=y
  34 CONFIG_CMD_DHCP=y
  35 CONFIG_CMD_MII=y
  36 CONFIG_CMD_PING=y
  37 CONFIG_CMD_EXT4=y
  38 CONFIG_CMD_EXT4_WRITE=y
  39 CONFIG_CMD_FAT=y
  40 CONFIG_CMD_UBI=y
  41 CONFIG_OF_CONTROL=y
  42 CONFIG_SPL_OF_CONTROL=y
  43 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
  44 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
  45 CONFIG_ENV_IS_IN_NAND=y
  46 CONFIG_DM=y
  47 CONFIG_SPL_DM=y
  48 CONFIG_SPL_DM_SEQ_ALIAS=y
  49 CONFIG_CLK=y
  50 CONFIG_SPL_CLK=y
  51 CONFIG_CLK_AT91=y
  52 CONFIG_AT91_UTMI=y
  53 CONFIG_AT91_H32MX=y
  54 CONFIG_DM_GPIO=y
  55 CONFIG_AT91_GPIO=y
  56 CONFIG_DM_MMC=y
  57 CONFIG_GENERIC_ATMEL_MCI=y
  58 CONFIG_NAND_ATMEL=y
  59 CONFIG_DM_ETH=y
  60 CONFIG_MACB=y
  61 CONFIG_PINCTRL=y
  62 CONFIG_SPL_PINCTRL=y
  63 CONFIG_PINCTRL_AT91=y
  64 CONFIG_DM_SERIAL=y
  65 CONFIG_DEBUG_UART_ATMEL=y
  66 CONFIG_DEBUG_UART_ANNOUNCE=y
  67 CONFIG_ATMEL_USART=y
  68 CONFIG_TIMER=y
  69 CONFIG_SPL_TIMER=y
  70 CONFIG_ATMEL_PIT_TIMER=y
  71 CONFIG_USB=y
  72 CONFIG_DM_USB=y
  73 CONFIG_USB_EHCI_HCD=y
  74 CONFIG_USB_STORAGE=y
  75 CONFIG_FAT_WRITE=y