configs/sam9x60ek_qspiflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_SYS_TEXT_BASE=0x23f00000
   4 CONFIG_TARGET_SAM9X60EK=y
   5 CONFIG_SYS_MALLOC_F_LEN=0x2000
   6 CONFIG_NR_DRAM_BANKS=8
   7 CONFIG_DEBUG_UART_BOARD_INIT=y
   8 CONFIG_DEBUG_UART_BASE=0xfffff200
   9 CONFIG_DEBUG_UART_CLOCK=200000000
  10 CONFIG_ENV_SECT_SIZE=0x1000
  11 CONFIG_DEBUG_UART=y
  12 CONFIG_ENV_VARS_UBOOT_CONFIG=y
  13 CONFIG_FIT=y
  14 CONFIG_QSPI_BOOT=y
  15 CONFIG_BOOTDELAY=3
  16 CONFIG_USE_BOOTARGS=y
  17 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
  18 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  19 # CONFIG_DISPLAY_BOARDINFO is not set
  20 CONFIG_HUSH_PARSER=y
  21 CONFIG_SYS_PROMPT="U-Boot> "
  22 CONFIG_CMD_BOOTZ=y
  23 # CONFIG_CMD_FLASH is not set
  24 CONFIG_CMD_MMC=y
  25 CONFIG_CMD_NAND=y
  26 CONFIG_CMD_NAND_TRIMFFS=y
  27 CONFIG_CMD_SF=y
  28 # CONFIG_CMD_SETEXPR is not set
  29 CONFIG_CMD_DHCP=y
  30 CONFIG_CMD_MII=y
  31 CONFIG_CMD_PING=y
  32 CONFIG_CMD_FAT=y
  33 CONFIG_CMD_UBI=y
  34 CONFIG_OF_CONTROL=y
  35 CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
  36 CONFIG_ENV_IS_IN_SPI_FLASH=y
  37 CONFIG_USE_ENV_SPI_BUS=y
  38 CONFIG_ENV_SPI_BUS=0
  39 CONFIG_USE_ENV_SPI_CS=y
  40 CONFIG_ENV_SPI_CS=0
  41 CONFIG_USE_ENV_SPI_MAX_HZ=y
  42 CONFIG_ENV_SPI_MAX_HZ=50000000
  43 CONFIG_USE_ENV_SPI_MODE=y
  44 CONFIG_ENV_SPI_MODE=0x0
  45 CONFIG_DM=y
  46 CONFIG_CLK=y
  47 CONFIG_CLK_AT91=y
  48 CONFIG_AT91_GENERIC_CLK=y
  49 CONFIG_DM_GPIO=y
  50 CONFIG_AT91_GPIO=y
  51 CONFIG_DM_MMC=y
  52 CONFIG_GENERIC_ATMEL_MCI=y
  53 CONFIG_MTD=y
  54 CONFIG_DM_SPI_FLASH=y
  55 CONFIG_SPI_FLASH=y
  56 CONFIG_SPI_FLASH_MACRONIX=y
  57 CONFIG_SPI_FLASH_SPANSION=y
  58 CONFIG_SPI_FLASH_STMICRO=y
  59 CONFIG_SPI_FLASH_SST=y
  60 CONFIG_SPI_FLASH_MTD=y
  61 CONFIG_PHY_MICREL=y
  62 CONFIG_DM_ETH=y
  63 CONFIG_MACB=y
  64 CONFIG_PINCTRL=y
  65 CONFIG_PINCTRL_AT91=y
  66 CONFIG_DM_SERIAL=y
  67 CONFIG_DEBUG_UART_ATMEL=y
  68 CONFIG_DEBUG_UART_ANNOUNCE=y
  69 CONFIG_ATMEL_USART=y
  70 CONFIG_SPI=y
  71 CONFIG_DM_SPI=y
  72 CONFIG_ATMEL_QSPI=y
  73 CONFIG_TIMER=y
  74 CONFIG_ATMEL_PIT_TIMER=y
  75 CONFIG_W1=y
  76 CONFIG_W1_GPIO=y
  77 CONFIG_W1_EEPROM=y
  78 CONFIG_W1_EEPROM_DS24XXX=y
  79 CONFIG_OF_LIBFDT_OVERLAY=y