configs/sam9x60ek_nandflash_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_SYS_TEXT_BASE=0x23f00000
   4 CONFIG_TARGET_SAM9X60EK=y
   5 CONFIG_SYS_MALLOC_F_LEN=0x8000
   6 CONFIG_NR_DRAM_BANKS=8
   7 CONFIG_DM_GPIO=y
   8 CONFIG_DEFAULT_DEVICE_TREE="sam9x60ek"
   9 CONFIG_DEBUG_UART_BOARD_INIT=y
  10 CONFIG_DEBUG_UART_BASE=0xfffff200
  11 CONFIG_DEBUG_UART_CLOCK=200000000
  12 CONFIG_ENV_OFFSET_REDUND=0x100000
  13 CONFIG_DEBUG_UART=y
  14 CONFIG_FIT=y
  15 CONFIG_NAND_BOOT=y
  16 CONFIG_BOOTDELAY=3
  17 CONFIG_USE_BOOTARGS=y
  18 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
  19 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  20 # CONFIG_DISPLAY_BOARDINFO is not set
  21 CONFIG_MISC_INIT_R=y
  22 CONFIG_HUSH_PARSER=y
  23 CONFIG_SYS_PROMPT="U-Boot> "
  24 CONFIG_CMD_BOOTZ=y
  25 CONFIG_CMD_DM=y
  26 # CONFIG_CMD_FLASH is not set
  27 CONFIG_CMD_I2C=y
  28 CONFIG_CMD_MMC=y
  29 CONFIG_CMD_NAND=y
  30 CONFIG_CMD_NAND_TRIMFFS=y
  31 # CONFIG_CMD_SETEXPR is not set
  32 CONFIG_CMD_DHCP=y
  33 CONFIG_CMD_MII=y
  34 CONFIG_CMD_PING=y
  35 CONFIG_CMD_HASH=y
  36 CONFIG_HASH_VERIFY=y
  37 CONFIG_CMD_FAT=y
  38 CONFIG_CMD_UBI=y
  39 CONFIG_OF_CONTROL=y
  40 CONFIG_ENV_IS_IN_NAND=y
  41 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  42 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  43 CONFIG_DM=y
  44 CONFIG_CLK=y
  45 CONFIG_CLK_CCF=y
  46 CONFIG_CLK_AT91=y
  47 CONFIG_AT91_GENERIC_CLK=y
  48 CONFIG_AT91_SAM9X60_PLL=y
  49 CONFIG_AT91_GPIO=y
  50 CONFIG_DM_I2C=y
  51 CONFIG_SYS_I2C_AT91=y
  52 CONFIG_I2C_EEPROM=y
  53 CONFIG_MICROCHIP_FLEXCOM=y
  54 CONFIG_GENERIC_ATMEL_MCI=y
  55 CONFIG_MTD=y
  56 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
  57 CONFIG_NAND_ATMEL=y
  58 CONFIG_ATMEL_NAND_HW_PMECC=y
  59 CONFIG_PMECC_CAP=8
  60 CONFIG_PHY_MICREL=y
  61 CONFIG_DM_ETH=y
  62 CONFIG_MACB=y
  63 CONFIG_PINCTRL=y
  64 CONFIG_PINCTRL_AT91=y
  65 CONFIG_DM_SERIAL=y
  66 CONFIG_DEBUG_UART_ANNOUNCE=y
  67 CONFIG_ATMEL_USART=y
  68 CONFIG_TIMER=y
  69 CONFIG_ATMEL_PIT_TIMER=y
  70 CONFIG_W1=y
  71 CONFIG_W1_GPIO=y
  72 CONFIG_W1_EEPROM=y
  73 CONFIG_W1_EEPROM_DS24XXX=y
  74 CONFIG_OF_LIBFDT_OVERLAY=y