configs/plutux_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_SYS_L2CACHE_OFF=y
   3 CONFIG_ARCH_TEGRA=y
   4 CONFIG_TEXT_BASE=0x00110000
   5 CONFIG_NR_DRAM_BANKS=2
   6 CONFIG_ENV_SIZE=0x2000
   7 CONFIG_ENV_OFFSET=0x1FFE0000
   8 CONFIG_DEFAULT_DEVICE_TREE="tegra20-plutux"
   9 CONFIG_SPL_TEXT_BASE=0x00108000
  10 CONFIG_SYS_PROMPT="Tegra20 (Plutux) # "
  11 CONFIG_TEGRA20=y
  12 CONFIG_TARGET_PLUTUX=y
  13 CONFIG_TEGRA_ENABLE_UARTD=y
  14 CONFIG_SYS_LOAD_ADDR=0x1000000
  15 CONFIG_FIT=y
  16 CONFIG_OF_SYSTEM_SETUP=y
  17 CONFIG_CONSOLE_MUX=y
  18 CONFIG_SYS_STDIO_DEREGISTER=y
  19 CONFIG_SPL_FOOTPRINT_LIMIT=y
  20 CONFIG_SPL_MAX_FOOTPRINT=0x8000
  21 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
  22 CONFIG_SPL_STACK=0xffffc
  23 CONFIG_SYS_SPL_MALLOC=y
  24 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
  25 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000
  26 CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
  27 CONFIG_SYS_MAXARGS=64
  28 CONFIG_SYS_PBSIZE=2084
  29 # CONFIG_CMD_IMI is not set
  30 # CONFIG_CMD_FLASH is not set
  31 CONFIG_CMD_GPIO=y
  32 CONFIG_CMD_MMC=y
  33 CONFIG_CMD_USB=y
  34 # CONFIG_CMD_SETEXPR is not set
  35 # CONFIG_CMD_NFS is not set
  36 CONFIG_CMD_EXT4_WRITE=y
  37 # CONFIG_SPL_DOS_PARTITION is not set
  38 # CONFIG_SPL_EFI_PARTITION is not set
  39 CONFIG_ENV_OVERWRITE=y
  40 CONFIG_ENV_IS_IN_NAND=y
  41 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  42 CONFIG_SPL_DM=y
  43 CONFIG_MTD=y
  44 CONFIG_MTD_RAW_NAND=y
  45 CONFIG_TEGRA_NAND=y
  46 CONFIG_SYS_NAND_ONFI_DETECTION=y
  47 CONFIG_SYS_NS16550=y
  48 CONFIG_USB=y
  49 CONFIG_USB_EHCI_HCD=y
  50 CONFIG_USB_EHCI_TEGRA=y
  51 CONFIG_USB_HOST_ETHER=y
  52 CONFIG_USB_ETHER_SMSC95XX=y