configs/pico-imx8mq_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_IMX8M=y
   3 CONFIG_SYS_TEXT_BASE=0x40200000
   4 CONFIG_SYS_MALLOC_LEN=0x600000
   5 CONFIG_SPL_GPIO=y
   6 CONFIG_SPL_LIBCOMMON_SUPPORT=y
   7 CONFIG_SPL_LIBGENERIC_SUPPORT=y
   8 CONFIG_ENV_SIZE=0x1000
   9 CONFIG_ENV_OFFSET=0x400000
  10 CONFIG_SYS_I2C_MXC_I2C1=y
  11 CONFIG_SYS_I2C_MXC_I2C2=y
  12 CONFIG_SYS_I2C_MXC_I2C3=y
  13 CONFIG_DM_GPIO=y
  14 CONFIG_DEFAULT_DEVICE_TREE="imx8mq-pico-pi"
  15 CONFIG_SPL_TEXT_BASE=0x7E1000
  16 CONFIG_TARGET_PICO_IMX8MQ=y
  17 CONFIG_SPL_MMC=y
  18 CONFIG_SPL_SERIAL=y
  19 CONFIG_SPL_DRIVERS_MISC=y
  20 CONFIG_SPL=y
  21 CONFIG_SYS_LOAD_ADDR=0x40480000
  22 CONFIG_FIT=y
  23 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
  24 CONFIG_SPL_LOAD_FIT=y
  25 CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
  26 CONFIG_BOARD_EARLY_INIT_F=y
  27 CONFIG_BOARD_LATE_INIT=y
  28 CONFIG_SPL_BOARD_INIT=y
  29 CONFIG_SPL_I2C=y
  30 CONFIG_SPL_POWER=y
  31 CONFIG_SPL_WATCHDOG=y
  32 CONFIG_HUSH_PARSER=y
  33 # CONFIG_BOOTM_NETBSD is not set
  34 # CONFIG_CMD_EXPORTENV is not set
  35 # CONFIG_CMD_IMPORTENV is not set
  36 # CONFIG_CMD_CRC32 is not set
  37 CONFIG_CMD_FUSE=y
  38 CONFIG_CMD_GPIO=y
  39 CONFIG_CMD_I2C=y
  40 CONFIG_CMD_MMC=y
  41 CONFIG_CMD_DHCP=y
  42 CONFIG_CMD_MII=y
  43 CONFIG_CMD_PING=y
  44 CONFIG_CMD_CACHE=y
  45 CONFIG_CMD_REGULATOR=y
  46 CONFIG_CMD_EXT2=y
  47 CONFIG_CMD_EXT4=y
  48 CONFIG_CMD_EXT4_WRITE=y
  49 CONFIG_CMD_FAT=y
  50 CONFIG_OF_CONTROL=y
  51 CONFIG_ENV_OVERWRITE=y
  52 CONFIG_ENV_IS_IN_MMC=y
  53 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  54 CONFIG_SYS_MMC_ENV_DEV=1
  55 CONFIG_SAVED_DRAM_TIMING_BASE=0x40000000
  56 CONFIG_DM_I2C=y
  57 CONFIG_SPL_SYS_I2C_LEGACY=y
  58 CONFIG_SUPPORT_EMMC_BOOT=y
  59 CONFIG_FSL_USDHC=y
  60 CONFIG_DM_ETH=y
  61 CONFIG_FEC_MXC=y
  62 CONFIG_PINCTRL=y
  63 CONFIG_PINCTRL_IMX8M=y
  64 CONFIG_SPL_POWER_LEGACY=y
  65 CONFIG_POWER_DOMAIN=y
  66 CONFIG_IMX8M_POWER_DOMAIN=y
  67 CONFIG_DM_REGULATOR=y
  68 CONFIG_DM_REGULATOR_FIXED=y
  69 CONFIG_DM_REGULATOR_GPIO=y
  70 CONFIG_SPL_POWER_I2C=y
  71 CONFIG_DM_RESET=y
  72 CONFIG_MXC_UART=y
  73 CONFIG_DM_THERMAL=y