doc: board: Convert README.qemu-mips to reST
[platform/kernel/u-boot.git] / configs / pcm058_defconfig
1 CONFIG_ARM=y
2 CONFIG_ARCH_MX6=y
3 CONFIG_SYS_TEXT_BASE=0x17800000
4 CONFIG_SPL_GPIO_SUPPORT=y
5 CONFIG_SPL_LIBCOMMON_SUPPORT=y
6 CONFIG_SPL_LIBGENERIC_SUPPORT=y
7 CONFIG_TARGET_PCM058=y
8 CONFIG_SPL_MMC_SUPPORT=y
9 CONFIG_SPL_SERIAL_SUPPORT=y
10 CONFIG_NR_DRAM_BANKS=1
11 CONFIG_SPL=y
12 CONFIG_SPL_LIBDISK_SUPPORT=y
13 CONFIG_SPL_SPI_FLASH_SUPPORT=y
14 CONFIG_SPL_SPI_SUPPORT=y
15 CONFIG_CMD_HDMIDETECT=y
16 CONFIG_DISTRO_DEFAULTS=y
17 CONFIG_FIT=y
18 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q"
19 CONFIG_BOOTDELAY=3
20 # CONFIG_USE_BOOTCOMMAND is not set
21 CONFIG_DISPLAY_BOARDINFO_LATE=y
22 CONFIG_BOUNCE_BUFFER=y
23 CONFIG_BOARD_EARLY_INIT_F=y
24 CONFIG_SPL_TEXT_BASE=0x00908000
25 CONFIG_SPL_DMA_SUPPORT=y
26 CONFIG_SPL_FS_EXT4=y
27 CONFIG_SPL_I2C_SUPPORT=y
28 CONFIG_SPL_SPI_LOAD=y
29 CONFIG_SPL_WATCHDOG_SUPPORT=y
30 CONFIG_SPL_YMODEM_SUPPORT=y
31 # CONFIG_CMD_FLASH is not set
32 CONFIG_CMD_GPIO=y
33 CONFIG_CMD_I2C=y
34 CONFIG_CMD_MMC=y
35 CONFIG_CMD_NAND_TRIMFFS=y
36 CONFIG_CMD_SF=y
37 CONFIG_CMD_CACHE=y
38 CONFIG_CMD_EXT4_WRITE=y
39 CONFIG_CMD_MTDPARTS=y
40 CONFIG_MTDIDS_DEFAULT="nand0=nand"
41 CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
42 CONFIG_CMD_UBI=y
43 # CONFIG_SPL_PARTITION_UUIDS is not set
44 CONFIG_ENV_IS_IN_SPI_FLASH=y
45 CONFIG_DM=y
46 CONFIG_FSL_ESDHC_IMX=y
47 CONFIG_MTD=y
48 CONFIG_NAND=y
49 CONFIG_NAND_MXS=y
50 CONFIG_SPI_FLASH=y
51 CONFIG_SF_DEFAULT_MODE=0
52 CONFIG_SF_DEFAULT_SPEED=20000000
53 CONFIG_SPI_FLASH_STMICRO=y
54 CONFIG_PHYLIB=y
55 CONFIG_PHY_MICREL=y
56 CONFIG_PHY_MICREL_KSZ90X1=y
57 CONFIG_MII=y
58 CONFIG_SPI=y
59 CONFIG_MXC_SPI=y
60 CONFIG_DM_THERMAL=y
61 CONFIG_OF_LIBFDT=y